SPECIAL REPAIR TO BLDG NO T-31,T-26, T-33-2 AND T-33-3 AT CERTAIN UNITS AND CONSTRUCTION OF 03 X TOILET AND 03 X BATHROOMS INCL MINOR WORK UNDER AGE BR DETT-B AND AGE EM OF GE 862 EWS

Amount

Sch 'A' Part-I (B/R works) Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises, complete all as specified and as directed.

M&L for vitrified tiles light shade or printed, coloured (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles n. exc 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 450x350x7mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

Dismantaling Plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern roof covering complete all as specified and directed.

S&F of Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engr-in-Charge.

S& F of Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engr-in-Charge.

S&F of Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in curve roof of any radius covering/ cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engr-in-Charge.

Dismantling of structural steel work of any description, complete all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work, complete all as specified and directed.

S&F Rolled mild steel section as in main and cross beams, hips and jack rafters, purline where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other plates, conforming to Fe 290 grade E-165 complete all as specified and directed.

S & F of mild steel work as in roof truss (framed), purlins or rafters, of Fe 410-W grade E-250 quality- A, including distance piece and cleats, complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) in any description in ground floor and paving not exc 15cm thick complete all as specified and as directed.

M&L for 75mm thick plain cement concrete, type C-2, 1:3:6 (using 40mm graded crushed stone aggregate) as in plinth protection, laid in slope 1:12 from outer edge of the wall, finished even and fair, laid in alternate bays including providing 6mm wide joints throughtout thickness of plinth protection in concrete bays and in between walling and plinth protection, joints filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand (all by weight), complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

M&L for plain cement concrete 1:2:4, type B-1, (using 20mm graded stone aggregate) as in quoin blocks, strings courses, copings, kneelers, apex stone, bed plated , gujjar bandi under roof, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work ,complete all as specified and directed.

Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed.

M&L for walling of random rubble, uncoursed, well bounded, bedded and solidly hearted built in cement mortar 1:6, complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Description all as per srl item no. 18 here-in-before but except stone. Note: Stone retrieved from demolition will be re-used.

M&L for cement concrete 1:3:6, type C-2 (using 40 mm graded crushed stone aggregates) as in surface channel and drains, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc, complete all as specified and directed.

Taking down cement plaster, any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surface, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete/stone surface, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered wall surface including cornices and applying two coats of distemper oil emulsion over a coat of chalk whitning, complete all as specified and directed by Engineer -in - Charge.

M&L for Preparation of newly plastered surface of wall and applying two coats of exterior emulsion weather proof paint of any approved two or more colour pattern (as approved by GE) over and including a coat of primer, complete all as specified and directed by Engineer -in - Charge.

Taking down chowkhats or frames (without taking off shutters from the frames) exc 1.5 Sqm and n. exc 4 Sqmm each and removing from site, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Sqm each and removing from site, complete all as specified and directed.

S & F of 1.25 mm thick pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates and holdfast including PCC 1:3:6 type C-0 using 12.5mm graded stone aggregate for back filling of frame etc, complete all as specified and directed.

S & F for 35mm thick 2nd class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified.

S & F of 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule 2009, part – I (Specifications) complete all as specified.

S&F for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square, complete all as specified and and as directed and as shown on drwaing.

M & L for factory made solid PVC panel door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheety strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded.sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.

S&F for powder coating of any colour (thickness of powder coating not less than 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

S&F for powder coating of any colour (Thickness or powder coating not less than 50 micron) aluminium door shutters of section weighing not less than 0.55 Kg/M including 5mm thick plain/coloured/frosted sheet glass, ACP sheet and stainless steel wiremesh and conneced items such as peg necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, pegstays 150mm long, hinges tyoe B-21, 100mm long, suitable handle, tower bolts, mortice lock and door stopper and other accessories as per site requirement complete all as specified and directed.

S & F for powder coating of any colour (Thickness or powder coating not less than 50 micron) aluminium fixed or openable shutter side hung type without sash bar for windows and ventilator with one or more openable or fixed, aluminium sections weighing 0.55 Kg/M including 5mm thick plain/coloured/frosted sheet glass and stainless steel wiremesh and conneced items such as peg necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, pegstays 150mm long, hinges type B-21, 100mm long 02 Nos, suitable handle 02 Nos, and other accessories as per site requirement complete all as specified and directed.

S&F powder coated aluminum anodized fixed partition with frame (Thickness or powder coating not less than 50 micron) of size 101.60mmx44.45mmx1.20mm thick with total height 3.20m. The panels shall be made out of 5mm thick plain /tinted(frosted) glass in top & bottm of 12 mm thick both side laminated particle board(i.e 50-50) including necessary jointing cleats, glazing clips , rubber packing, aluminum snap beading screw etc including making good to the disturbed portion complete all as specified and directed.

S & F of box type steel window with side hung shutters including box type hinges with steel handle, hold fast and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S & F of box type steel window with side hung shutter including box type hinges with steel handle, hold fast and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel ventilators with top hung shutters including hinges and handle with steel peg stay complete welded, complete all as specified and directed.

S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe-290 Grade E-165 including dismantling old one complete all as specified and directed.

S & F of 4 mm thick Sheet glass, ordinary quality and glazing with oil putty/wooden beads in square in any size complete all as specified and directed.

S& F for stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18m and fixed with tinned tacks, or galvinsed wire staples including cutting, welding etc for steel window / ventilators, complete all as specified and directed.

M&L for preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified.

M & L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S & F in repairs stainless steel curtain rod of 20mm dia complete as specified and directed by Engr-in-Charge.

S & F in repair stainless steel 'T' and 'L' type brackets with finials fixing to wall with MS full screws including wooden/plastic cleats, complete as specified and directed by Engr-in-Charge.

S & F of 100 mm long mild steel butt hinges, medium weight cold rolled fixed/welded to frame (ISI marked), complete all as specified and directed.

S & F of 125 mm long extruded anodised aluminium alloy handle, fabricated type (ISI marked), complete all as specified and directed.

S & F of 125 mm long aluminium anodised barrel tower bolt of extruded section (ISI marked), complete all as specified and directed.

S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section (ISI marked), complete all as specified and directed.

S & F of 300 mm long (Length of bolt) aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy (ISI marked), complete all as specified and directed.

S & F 140mm long floor door stopper of brass body and tongue with hard drawn steel spring complete all as specified and directed.

S & F 300mm, mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F for 4mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions, laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug or hanged with existing truss members. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per instructions etc including dismantling old existing ceiling board, complete all as specified and directed.

M& L for solid PVC wall lining consisting of 5mm thick plain or wood grain printed colour PVC sheet inclusive of solvent cement including 5mm thick PVC sheet fillet of width 35mm fixing on walls/ceiling to make PVC frame as per standard specifications including dismantling of old wall paneling with fillets complete all as specified and directed.

M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

S & F in repairs for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or fixed to wall with suitable size of clamps, complete all as specified and directed.

S & F in repairs for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall with suitable size of clamps, complete all as specified and directed.

S & F in repairs 110mm bore PVC (SWR) bends of any radius with access door, complete all as specified and directed.

S & F in repairs 75mm bore PVC (SWR) bends of any radius with access door, complete all as specified and directed.

Taking up or down steel tubing 15mm dia and connection including removal to store, complete all as specified and directed.

Taking up or down steel tubing 20mm dia and connection including removal to store, complete all as specified and directed.

M&L for 15 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors, complete all as specifed and directed.

M&L for 20 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors, complete all as specifed and directed.

S&F in repair for 15mm bore Stop valve (concealed type), chromium plated, cast copper alloy screwed down, high pressure with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair for 15 mm bore bib tap cast copper alloy, chromium plated , fancy type, 'with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.

M & L in repairs for 15 mm dia fancy type, chromium plated angle valves, cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specifed and directed.

Supply and fixing in repair viterous China wash basin, white flat back, size 550x400mm (excluding taps, waste chain and plug and porcelan stopper) but including brackets, including cutting for and pinning in ends of brackets complete all as specified and directed.

S & F in repair for 32mm dia PTMT waste coupling (half or full threaded) (minimum wt 60gms)for sinks, basins etc with long screwed shanks and fly nuts, flange complete all as specified and directed.

S&F in repair for 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, brass chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.

S & F in repair brass chromium plated tubular towel rail 20mm dia 600mm long with and including one pair of brass chromium plated bracket complete all as specifed and directed.

S&F in repair for vitreous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern and flush pipe) complete all as specifed and directed.

S&F in repair for 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

S & F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connection and fixed in position, complete all as specified and directed by Engr-in-Charge.

S & F in repair for PVC connection pipe 15mm dia with PTMT nuts of length 600mm complete all as specifed and directed.

S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 1000 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple and 20mm bore ball brass valve with union screwed for iron pipe and fixed including dismantling of old unserviceable tank, complete all as specifed and directed.

M & L for 75 mm dia cast iron floor trap, with grating fixed with white cement, complete all as specified and directed.

M&L for 2nd class hard wood well seasoned plain solid straight chowkhat framed wrought framed, rebated on the solid, round or chamfered put together with glue and pinned at joint and fixed in wall complete all as specified and directed

M&L in repair for 18 / 19mm thick prelaminated particle board, cupboard, kitchen cabinat shutter etc, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work, complete all as specified and directed.

S&F in repairs 30mm width of flaps continuous (Piano) hinges, mild steel, bright finish or electrogalvanized complete as specified and directed

S & F of 100 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.

S & F of 75 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F of 100mm long hasp and staple, mild steel, safety type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified and directed.

M&L for coloured chequered cement concrete tiles of size 30 cm x 30cm x 25 mm thick set, jointed in neat cement slurry and pigment in floor and pointed in white or coloured (apporved by GE) cement to match the shade of tiles laid over and including 20 mm thick screed bed in cement mortar 1:6 after dismantling of old unserviceable tiles etc and removing rubbish off the premises complete all as specified and as directed.

M&L for Machine cut kota stone slab(mirror polished) flooring 20mm thick as in floors and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 15 mm thick in cement mortar 1:4 of any size after dismantling old unserviceable of kota stone, complete all as specified and directed.

M&L for complete removal and applying two coats of high preformance, aliphatic acrylate based anticarbonation, protective cum decorative coating over specific primer as recommended by authorised applicator including preparation of old surfaces, complete all as specified and directed. Note :- Treatment shall be carried out through authorised applicators only with a warrantee period of 5 years for which the contractor shall have submit FDR/ Gurantee amount equal to 10% of the cost of work done against this item and Colour code shall be approved by Engr-in-Chrage)

M&L for preparation old of previously untreated steel or iron surface of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed.

Surface excavation in soft/loose soil n.exc 30cm deep and averaging 15cm deep and getting out, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth not exceeding 10sqm on plan for foundation or for shaft, well, manhole's, for laying of cables/pipes and foundation of poles stays and getting out in any type of soil complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm (soil) thickness all as specified and directed.

Removing of excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete, complete all as specified and directed.

M&L for reinforced cement concrete M-25 (Design mix-25) (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns and the like, complete all as specified and directed

M&L for reinforced cement concrete M-25 (Design mix-25) (using 20mm graded stone aggregates) as in columns, pillars, piers, post, struts and the like, complete all as specified and directed

M&L for reinforced cement concrete M-25 (Design mix-25) (using 20mm graded stone aggregate) as in beams, cantilivers, bressmmers, lintles over 1.5 m span, complete all as specified and directed

M&L for reinforced cement concrete M-25 (Design Mix) (using 20mm graded crushed stone aggregate) as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like, complete all as specified and directed

M&L for reinforced cement concrete M-25, (Design Mix) (using 20mm graded crushed stone aggregate) as in chajjs etc, complete all as specified and directed

M&L formwork to sides of concrete foundation, footing, bases of colums, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar work, in rough finished flat surface of concrete, complete all as specified and directed.

M&L formwork to side of pillars, posts, struts, piers, columns and stanchions for rough finished surface of concrete, complete all as specified and directed.

M&L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilivers, shelves, including sup-ports, overhangs etc also splays between floors and beam etc, complete all as specified and directed.

M&L formwork to soffits of suspended slabs such as roof slabs, landings and similar work; n exc 200mm thick (Horizontal and sloping) for rough finished surface of concrete, complete all as specified and directed.

M&L formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide,for rough finished surfaces of concrete, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for mild steel TMT bars 5 mm dia and over upto 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends as in stirrups, spacers and binders including binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for brick work using old size bricks sub class 'B', straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4, complete all as specified and directed.

M&L for rendering 5 mm thick on concrete surface in cement mortar 1:3 on ceiling, finished even and smooth with sagol cement ,complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.

M&L for preparation of new plastered ceiling surface and applying two coats of distemper oil emulsion over a coat of chalk whitning, complete all as specified and directed by Engineer -in - Charge.

S & F of 3 mm thick Sheet glass, ordinary quality and glazing with oil putty/wooden beads in square not ecxeeding 0.5 Sqm in each pane, complete all as specified and directed.

M&L for Damp proof courses 40mm thick in cement concrete 1:2:4 type B-0 to horizontal or vertical surfaces including necessary formwork, complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregates as in sub base etc, complete all as specified and directed.

S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 1000 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple and 20mm bore ball brass valve with union screwed for iron pipe and fixed, complete all as specifed and directed.

M&L for 110mm bore PVC (SWR) single socketed in any length with rubber ring joints fixed to wall with and including MS clamps, complete all as specified and directed.

S&F for 110 mm bore PVC (SWR) bend any radius with access door, complete all as specifed and directed by Engr-in-Charge.

M&L for 110mm bore PVC (SWR) branch pieces single (single 'Y' ) equal or unequal with acesses door, complete all as specified and directed.

M&L for 110mm bore PVC (SWR) junction single (single 'T' ) equal or unequal wit access door, complete all as specified and directed.

M&L for 75mm bore PVC (SWR) single socketed in any length with rubber ring joints fixed to wall with and including MS clamps, complete all as specified and directed.

S&F for 75 mm bore PVC (SWR) bend any radius with access door, complete all as specifed and directed by Engr-in-Charge.

M&L for 75mm bore PVC (SWR) branch pieces single (single 'Y' ) equal or unequal with acesses door, complete all as specified and directed.

M&L for 75mm bore PVC (SWR) junction single (single 'T' ) equal or unequal wit access door, complete all as specified and directed.

M&L for water proofing treatment, over RCC roof, projections of any thickness, any type, laid horizontally or vertically including cleaning the surface with wire brush and providing following :- (a) Rendering 10mm thick in cement mortar 1:3 on concrete roof surfaces and finish the surface even and smooth without using extra cement including mixing water proofing compound @ 3% by weight of cement. (b) Apply a coat of bituminous primer confirming to IS-3384@ 0.4 ltr/Sqm on newly plastered surface after curing as per IS-456 and dried. (c) After the primed surface has dried, apply a coat of hot blown bitumen(85/25 penetration) confirming to IS-702 @ 1.2 Kg/Sqm of the surface. (d) Provide polymeric water proofing membrane ISI marked laid with overlaps, bonded with hot blown bitumen, and laid by torch application method, end overlaps shall not be less than 150mm and side lap 75mm. Polymeric water proofing membrane should be five layered with centre core as 90 micron high molecular high density polyethylene film, min weight 3 Kg per sqm & minimum 3mm thick reinforced with polyster non wove fabric, APP membrane shall laid acorss the slop from lowest line of sloping roof towards ridge. (e) Over the APP membrane, apply a coat of semi hot blown 85/25 penetration grade bitumen confirming to IS-702 @ 1.20 Kg/ sqm and blinded with fine sand in dry condition @ 0.50 Kg / Sqm dusted over the bitumen coat Note : (i) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface. (ii) Ponding test shall be conducted for 72 hrs as directed. (iii) Rate of WPC shall be included in the quoted rate.

S&F 100mm outlet dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1, complete all as specifed and directed.

S&F 75mm outlet dia cast iron nahani trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1, complete all as specifed and directed.

S & F for PVC connection pipe 15mm dia with PTMT nuts of length 450mm complete all as specifed and directed.

S & F for PVC connection pipe 15mm dia with PTMT nuts of length 600mm complete all as specifed and directed.

S&F for 15 mm bore bib tap cast copper alloy, chromium plated , fancy type, 'with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S&F of overhead shower of 100mm dia round shape single flow (ABS body chrome plated with grey face plate ) with rubit cleaning system, complete as all as specified and directed.

S&F for 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, brass chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.

S&F for 15mm bore Stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, chromium plated, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F of brass chromium plated tubular towel rail 20mm dia 600mm long with and including one pair of brass chromium plated bracket fixing with screws and plastic /wooden cleats, complete all as specifed and directed.

S&F of brass CP wall mixer for mixing hot & cold with connection to the over head shower, screwed down for 15mm iron pipe and fixed, complete all as specified and directed.

S & F 15mm CP brass Health faucet with 1.2 meter long stainless steel hose and wall hook alongwith two way brass CP bib cock, screwed down, screwed for iron pipe or female of quarter turn type, complete all as specified and directed by Engr-in-Charge.

S&F for vitreous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern and flush pipe) complete all as specifed and directed.

S&F for 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.

S&F for vitreous China water closet (squatt pan) Orrisa pattern 680x470 mm size pan, white, with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to flushing cistern with flush pipe, complete all as specified and directed.

S&F for vitreous China urinal bowl type, (back or corner wall type), white, with grating and union for discharge pipe excluding flushing cistern and incluidng flush type and waste pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement, complete all as specified and directed.

S&F for CP soap dish holder (oval type) of size 100x50x10mm fixed to wall with chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed

S&F 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1, complete all as specifed and directed.

S&F for PVC waste pipe 32mm dia 900mm long suitable for wash hand basins and urinals including connecting, complete all as specified and directed.

S&F for 75 mm bore PVC (SWR) vent cowl, complete all as specifed and directed by Engr-in-Charge.

Supply and fixing viterous China wash basin, white flat back, size 550x400mm (excluding taps, waste chain and plug and porcelan stopper) but including brackets, including cutting for and pinning in ends of brackets complete all as specified and directed.

M&L for construction of LLDPE septic tank (conventional) of capacity 10 users designed to carry sewage and sludge water, excavation in any type of soil, PCC 1:4:8, type D-2 in foundation, vent shaft, connection etc including returning , filling of soil at sides of tank, well ramming in layers and removing excavated surplus soil to a distance not exc 50m, complete all as specified and directed by Engr-in-Charge at site.

M&L for construction of soakage well 1.2 m dia and 3.00 m deep including excavation and earth work in any type of soil, PCC 1:3:6, type C-2 in foundation, walls of honey combed masonry with top ring of M-25 concrete including intercerpting chamber and screen chamber made of brick masonry in cement mortar 1:4, RCC cover slab in M-25, interconnecting pipes of RCC, complete filled with brick bats complete all as specified and shown on drawing No CE/TD 1202/2008 SH 1/2 & 2/2 and as directed at site by Engr-in-Charge.

M&L for 150 mm internal dia Salt-Glazed stone ware drain pipes grade 'A' laid in trenches over concrete bedding jointed in cement mortar (1:1) and tested ,complete all as specified and directed.

M&L for plain cement concrete 1:4:8, type D-2 ,using 40 mm graded stone aggregate, as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150 mm bore SGSW pipe, complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L for providing precast cement concrete landing cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1 using 20mm grading stone aggregate and setting in cement morter 1:6 including necessary formwork and moulds, complete all as specified and directed

Sch 'A' Part-II (E/M works) Taking down carefully copper/ aluminum point wiring (light, fan, bell, socket or power) complete, including all fittings such as switches, ceiling roses, pendants, regulators sockets etc.) removing material from the site and making good the disturbed surfaces of walls, floor or ceiling etc. to match with existing specifications, complete all as specified and directed.

M&L for point wiring for one light point/fan point/bell point controlled by one-one way switch with 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor unsheathed in and including PVC casing caping medium grade of 25mm width complete with all acessories including PVC sunk box ISI marked for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS, PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable as earth wire upto common earth and connected to earth dolly including making good the diturbed surfaces to match with the existing, compete all as specified and directed. (Note:- Three run of copper conductor of required size and one run of casing capping measured as one unit and also colour coding of wiring to be followed as red/yellow/blue for phase, black for neutral and green for earth)

Description all as per Serial item No 152 above but for one 3 pin 6 Amp socket outlet on independent board controlled by one 6 amp switch, complete all as specified and directed.

Description all as per Serial item No 152 above but for one 3 pin 6 Amp socket outlet on same board controlled by one 6 amp switch, complete all as specified and directed.

Description all as per Serial item No 152 above but for one 3 pin 16 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistraind copper conductor cable with 2.5 sqmm single core multistraind FRLS copper conductor cable as earthling lead, complete all as specified and directed.

S&F for switch piano flush type single pole one way 5 amps 240 volts, complete all as specified and directed.

S&F for switch socket combination 2 in 1, 5 pin, 6 amp flush type, single pole, 240 volts, complete all as specified and directed.

S&F for socket outlet 2 in 1, 5 pin, 6 amp flush type, complete all as specified and directed.

S&F for switch socket combination 2 in 1, 5 pin, 5/15 amp flush type, single pole, 240 volts, complete all as specified and directed.

S&F for fan regulator electronic, step type hum free suitable to control speed of fan from 0 to 100% and connecting electrically, complete all as specified and directed.

S&F for ceiling rose 3 phase/PVC/polycarbonate isolated body surface bakelite 2 to 3 terminals, complete all as specified and directed.

Taking down ceiling fan of any sweep of any make from its existing position, after disconnecting electric connection for carrying out repairs including servicing, overhauling, greasing, etc after cleaning the body internally and externally with cleaning agent including renewal of minor spare parts such as split pin, cater pins, coupling bolt, capacitor holder, terminal adoptor, screws nuts and washer etc and replacement of spare parts/accessories such as ball bearings , gun metal bushes, capacitors, canopy top and bottom, shakle clip assembly, rewinding of fan motor, painting and including hanging fixing back in existing location and making cable connection and testing for its satisfactory performance complete including writing of fan number with white paint complete all as specified and directed.

S&F in replacement for ceiling fan 230V, 50 Hz, AC 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod and electronic regulator alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with 3 core 0.75 Sqmm PVC insulated copper conductor cable, complete all as specified and directed. Note:- Old unserviceable fan obtained from taking down shall be deposited to MES store.

S&F in repair for LED street light fitting 35 watts, 240volts, AC, outdoor type with high pressure diecast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including three core 0.5 sqmm copper cable from connector to fitting, complete as in repeir all as specified and directed

S&F in repairs recess mounting 6500k light fittings LED 36 watts 2'x2' panel surface/ recess mounting light fitting LED backlit with high efficient LEDs & soft glare free PMMA diffuser IP-20, internally prewired, 230V, complete with all accessories such as electronic driver, connector block etc and neccessary fixing arrangement at any height including connecting up with driver three core flexible copper conductor, complete all as specified and directed. Note:- Material required such as safety harness, ladder and T&P etc will be provided by the contractor without any extra cost.

M&L in repair for LED Tube light fitting, complete with 1x 20 watts, 220V, AC decorative box type with driver, holder in and including LED tube light connection complete prewired and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and connector block etc and necessary fixing arrangement at any height, complete all as specified and directed.

S&F in replacement for MCB distribution board SPN 8 way, double door 240 volts duly painted with epoxy based powder coated painting suitable for mounting MCB DP/SPN as incomer and MCB SP/DP as outgoings complete with 200 amp rated busbar, neutral bar, earth bar connecting cable links with top and bottom removable gland plate with IP 42 protection complete all as specified and directed. (Note:- MCBs will be measured separately.)

M&L for MCB single pole 6 to 32 amp, 240 volts, 'C' series/curve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.

M&L for MCB single pole & neutral 6 to 32 amp, 240 volts, 'C' series/curve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.

M&L for sub main wiring complete with 2 run of 4 sqmm, single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC casing and caping of size 25mm width or above as required at site and accessories such as tee, corners,overlaping connector etc of suitable size fixed on surface of walls/roofs/ceiling and including 01 run of 4 sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colour as earth continuity conductor connected to common earth dolly including taking down old unserviceable sub main wiring, complete all as specified and directed. (Note : - 02 run of 4 sqmm single core copper conductor cable and one run of 4 sqmm single core copper conductor cable and 01 run of PVC casing and caping shall be measured as one unit and also colour coding of wiring to be followed as red/yellow/blue for phase, black for neutral and green for earth).

S&F in replacement for lamp holder insulated body PVC/ Polycarbonate type with back plate suitable for batten/angular/pendent fittings including LED inverter bulb 9watt, B22, CDL, 240 volts, complete all as specified and directed.

Supply, laying, jointng, connecting, testing and commissioning, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 16 sqmm 2 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands , complete after taking down old unserviceable cable all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushoining, concrete cable cover and protection GI pipe shall be measured and paid separetly and length of calbe shall be one length unless otherwise as directed by GE).

M&L for dry sand cushioning to underground cable, provided with a layer 8 cm thick before and 15 cm deep after laying and stretching jointing and testing the cable, complete all as specified and as directed (Note: Punned thickness of sand shall be measured and paid).

M&L for brick covering with width equal to length of brick as mechanical protection to cable using sub class ‘B’ bricks laid flat, size 230mmx115mmx75mm over the cable abutting each other, complete all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15 mm bore and water pipe 20 mm bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 & RCC cover all as specified & shown in elect plate No. 3 of SSR part I of 2010 including testing on completion including taking down existing unserviceable earthing complete all as specified. (Note:-Earthwork, Earth strip and protection pipe upto board shall be included in the quoted rate)

S&F in repair for environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head 1x10 watt 6000 K inbuilt LED luminaire comprising of high brightness LEDs, IP54 protection including connecting electrically using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete all as specified and directed.

M&L for LED Tube light fitting, complete with 1x 20 watts, 220V, AC decorative box type with driver, holder in and including LED tube light connection complete prewired and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and connector block etc and necessary fixing arrangement at any height, complete all as specified and directed.

S&F for environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head 1x10 watt 6000 K inbuilt LED luminaire comprising of high brightness LEDs, IP54 protection including connecting electrically using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm complete all as specified and directed.

S&F for exhaust fan 4 blade, heavy duty, double ball bearing of 300mm sweep, 1200 RPM, having power input 70W, electrical operated 230 Volts, 50Hz, AC single phase, with protective bird guard including connecting with three core, 0.75 Sqmm PVC insulated copper conductor etc, complete all as specified and directed.

S&F for MCB distribution board SPN 4 way, double door 240 volts duly painted with epoxy based powder coated painting suitable for mounting MCB DP/SPN as incomer and MCB SP/DP as outgoings complete with 200 amp rated busbar, neutral bar, earth bar connecting cable links with top and bottom removable gland plate with IP 42 protection complete all as specified and directed. (Note:- MCBs will be measured separately.)

Supply, install, commissioning and testing of vertical storage water heater (geyser) 5 star rated as per BEE norms electricity operated suitable for 230 volts, 50 hz, AC supply system complete with porcelen/ glass coated insulated heating element upto 2KW, copper tank, external thermostat and docorative of capacity 25 Ltrs, with all accessories such as safety valve, thermostate, NRV, PVC connection pipe 2 nos 450mm long etc, complete all as specified and directed.

Supply, laying, jointng, connecting, testing and commissioning, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 16 sqmm 2 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands , complete all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushoining, concrete cable cover and protection GI pipe shall be measured and paid separetly and length of calbe shall be one length unless otherwise as directed by GE).

M&L for cutting, threading and inserting tee for taking new branch connection from existing pipe line of any size for the pipe size 20mm, complete all as specified and directed by Engr-in-Charge.

M&L for 20mm bore gun metal, gate / globe valve with iron wheel head screwed on both sides for iron pipes and fixed, complete all as specified and directed.

M/S RAHUL GUPTA (BID ID -3135769)