BLOCK B- CONSTRUCTION OF OFFICE BUILDING (FIRST FLOOR) AT NAGAR PANCHAYAT BIDHUNA , DISTT. AURAIYA

R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in Foundation/Column excluding its fixing and binding wire and including neccesary centaring and shuttering Including supply of all material, labour, T&P etc. Required for proper completion of the work.

TOR Steel work in plain work such as R.C.C. works in slab, beam, Plinth band column, etcincluding bending for proper shape and supply of steel and its wastage bend hook and authorised over lapping shall be measured & including cost of bending wire

M-150 Brick work in 1:6 cement and 6 c.sand insuper structure including all material labour T&P

15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including supply of all materials, labour and T & P etc. required for proper completion of the work.

Providing & laying vitrified fioor tiles in 600x600mm sizes(thickness to be specified by the manufacturer)with water absorption less than0.08% and conforming to IS : 15622 of approved make in all colours & shades,

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shadeof the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type Proper completion of the work 32 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 3.8 mm. To 4.7 mm thick glass panes

Wall painting (2 coat) with plastic emulsion paint of approved brand and manufacture on decorative wall surface to give an even shade including thoughly brushing the surface clean of all dirt grease loose pieces and prepared smooth.

Providing and applying white cement based putty of average thickness 1mm , of approved brand and manufacturer, over the plastered wall surface to prepare even and smooth complet.

Painting or varnishing on WOOD/Iron works in small areas with one coat of ready mixed priming paint and one coat of approved superior quality mixed paint of clear synthenic varnish including supply of all materiala, labour and T& Petc.