Repair or Renovation of Division, Sub Division Office and Boundary Wall of Mandakinipuram Colony

Amount

Earth work in foundation in dry ordinary soil ( loam clay or sand) including lift up to 1.50 meter and lead up to 30 meter and including back filling, watering and ramming of excavated earth in to trenches or into the space between the structure and the sides of foundation trenches or into the plinth with removal and disposal or surplus earth as directed by the Engineeer-in-charge uo to a distance of 30M from the foundation trenches. ( Building)

Providing and laying PCC in 1:4:8 (1 Cement : 4 Coarse sand : 8 graded stone aggregate 20 mm nominal size) including supply of all materials, labours and T&P etc. required for proper completion of the work. ( In Foundation and floors.)

Providing and Laying Cement concrete 1:3:6 with cement, coarse sand and 25 to 37.25 mm stone grit including cost of all material,Labour and T&P etc. complete.

R.C.C in 1:1.5:3 (M 200) with cement, coarse sand , and stone grit 10-20 mm. including cost of all materials labour T&P complete etc .

M 150 Brick work in 1:4 cement mortar with (1 cement : 4 coarse sand ) including supply of all materials, labours and T&P etc. required for proper completion of the work.

25 mm thick D.P.C. in C.C. 1:2:4 with cement, coarse sand & shingle/grit upto 10 mm gauge size including water proofing compound in the proportion as specified by the manufactures including cost of all materials but including labour, T&P etc.complete

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos / Lindane E.C. 20% with 1 % concentration

Supply and fixing S.S. Mosquito proof heavy quality with fly and mosquite proof stainless steel Grade 304 wire mesh gauge with 0.50 mm dia wire and 1.40 mm wire aperture or expended metal heavy quality over windows and including supply of C.P., teak wood batten 8 cmX 1 cm. flat iron 25mm x4mm and including supply of necessary screws all materials, labour, Tools & Plants etc. required for proper completion of the work.

Supply and Fixing ISI marked flush door shutters conforming to IS: 2202(part I) decorative type,core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. including ISI marked Stainless Steel butt hinges with necessary screws, Steel Handels,Siliding bolts, Door stopper and tower bolts (35 mm thick)

Providing and fixing angle/Tee iron frames for doors, windows and ventilators of mild steel Angle sections of size 35*35*5 mm, joints mitred and welded by angle iron 35*35*5 mm or 35*5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-in -charge

Reinforced steel including bending, binding,cutting and placing in position including cost of matarial and labour and T&P etc complete.

Mild Steel Iron grill, balcony & Staircase railing of a approved qualitity and drawing including supply of all materials ,fabrication, labour,T&P in all respect as per direction of Engineer-in -charge for proper completion of work at site

Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washer filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlines, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zink coating notless than 275 gm./Sqm

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level.

12.50 mm thick cement plaster on brick work with cement mortar of mix 1:4 (1 cement : 4 Coarse sand) including supply of all materials, labours and T & P etc. required for proper completion of the work.

Cement concrete flooring 1:2:4 with cement, coarse sand and 10 to 20 mm stone grit up to 40 mm thick without base concrete including cost of all materials but including labour,T&P etc

Kota stone slab flooring over 20 mm(average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement motar 1:4( 1 Cement: 4 Coare sand):25 mm thick Stone.

Providing and laying vitrified floor tiles in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. complete. (a) With Lean Concrete 600×600 mm size Tiles

Applying ready mix primer on wood surface including cost of all materials.(Rates Inclusive of repairing surface, preparing of surface by thoroughly cleaning oil, grease, dirt and other foreign material and scour with wire brush etc.)

Painting 2 coat over priming coat( but excluding cost of priming coat) on new wood surface including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping including cost of material, labour, tools & plants etc. as required for proper completion of work. Paint shall be used as per standard I.S. specification.

Applying ready mix primer on Steel surface including cost of all materials.(Rates Inclusive of repairing surface, preparing of surface by thoroughly cleaning oil, grease, dirt and other foreign material and scour with wire brush etc.)

Painting 2 coat over priming coat (but excluding cost of priming coat) on steel and other metal surface including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping including cost of materials, labours, tools and plants etc. as required for proper completion of work. Paint shall be used as per standard I.S. specification.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. Including cost of all material,T&P etc .complete required for proper completion of the work

Distempering two coat with oil bound distemper of approved brand and manufacture and of required shade on undercoated wall surface to give an even shade over an including a priming coat cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paints after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including preparing the surface even with plaster of paris or approved synthetic material and sand papered smooth including cost of all materials

Finishing walls with Acrylic Smooth exterior paint(Apex) of required shade: New work Two or more coat applied@ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @2.20 kg/10 sqm

Dismantling C.C. or brick or granolithic floor including base concrete and including stacking of dismantled materials as directed by Engineer-In-Charge within a distance of 60 meters.

Dismantling existing plaster including disposal of refuse with in distance of 60 meters.

Laying of I shaped precast Interlocking tiles of thickness 80 mm (Rubber moulded Grey) (Compressed strength not less than 30 mpa and weight 4.50 kg.) including 25 mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work, including VAT.

Centering and Shuttering for R.C.C./R.B. work including cost of centering and shuttering up to 3m height

Providing and Laying Cement concrete 1:2:4 with cement, coarse sand and 10 to 20 mm stone grit including cost of all material,Labour and T&P etc. complete, per Cum.

Providing & fixing GI barbed iron wire (hot dip ) fencing in three rows including fixing it to post after stretching it including labour and T&P etc.required for proper completion of work also including supply of wires (14×14 SWG) with 100mm barb spacing (@ 11.66Kg/100mtr.) and excluding supply of posts.

Supply and fixing of 4cm. Thick C.P. Teak wood Fully Glazed door and window shutters including supply and fixing of wooden cleats and stops and fitting but excluding their supply of hinges, bolts, locks,handles, springs, and/or other fitting but excluding their supply and including painting with two coats of Black Japan on all iron fittings if necessary & including fixing the glass panes (5mm thick) with putty and brad.(Fitting with necessary screws to be supplied Separately)

Providing & Fixing of glass panes with putty and nails in steel doors, windows , clerestory windows all complete with:4.0 mm thick panes

Dismantling doors and window leaves including stacking material with in distance of 60M

Providing & Laying Ceramic glazed floor tiles of size 300X300 mm (thickness to be specified by manufacturer) of Ist quality conforming to IS:15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm. thick cement mortar 1:4( 1cement:4 coarse sand) jointing with grey cement slurry @ 3.3 Kg/sqm including pointing the joints with white cement and matchingg pigment etc., complete.

S/F 6mm (1/4") thick china white glazed tiles on walls or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement jointed and polishing complete including supply of all materials, labours required for proper completion of the work

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid 10 letre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (a) W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing water closet squatting pan( Indian type W.C. Pan) with 100 mm sand cast Iron P or S Trap, 10 letre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. Pan of size 580*440 mm with integral type foot rests

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS:2556, C.I. Trap with outlet grating and other couplings in C.P. brass,including painting of fittings and cutting and making good the walls and floors wherever required:(a) Single half stall urinal with 5 liter PVC automatic fiushing cistern

Providing and fixing wash basin with C.I. breckets, 15mm C.P. brass pillar tap, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash Basin size 550×400 mm with a pair of 15mm C.P. brass pillar taps

Providing and fixing Stainless Steel grating of approved quality and colour. (100 mm )

Supplying & fixing P.V.C. connection 600mm long with two brass units (15mm dia)

Supply and fixing of UPVC S.W.R. Gully trap confirming to IS-14735 size 150×110mm dia of self cleaning design including fixed brick Masonry chamber 250×250×250mm .size i/c supply and fixing of CI cover with frame wait not less then 4.50Kg. & CI grating.150×150mm complete in all respects .

Providing and fixing PVC pipe confirming to IS make working pressure 6 Kg./Cm2 incuding testing labour T&P and all complete fittings (75mm dia)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.

15 mm nominal outer dia pipes

20 mm nominal outer dia pipes

25 mm nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings, with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. External Work

25 mm dia od for connection from OHT

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

25mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

Providing and fixing uplasticised PVC connection pipe with brass unions:

(b) 45 cm length

i) 15 mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Providing and fixing 600×450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Supplying and fixing 300 litres of Sintex or euivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position i/c all materials, labours and T&P etc. for proper completion of the work. Tank Should be ISI marked, Sintex or Equivalent and I/C all taxes

Painting top of roofs with bitumen of approved quality @ 17 kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete with residual type petroleum bitumen of grade VG-10

10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 Clay:1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement:3 Fine sand) mixed with 2 % of integral water proofing compound by weight of cement and finished neat: with common burnt clay F.P.S.(non modular) brick tile of class designation M-100

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete (0.63 mm thick with zinc cozting not less than 275 gm /sqm

ELECTRICAL WORK Wiring point for light in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. wire,GP Box ,piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect, as directed .

Wiring point for fan /fresh air fan (light duty exhaust fan) in PVC conduit with 1.5 sq.mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. wire, piano type switch & ceiling rose on 3 mm. thick phenolic laminated backelite sheet etc, complete in all respect.

Wiring Point for plug in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. wire , GP Box and piano type switch and socket etc.complete in all respect.

Wiring point for call bell in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. wire ,GP Box , and piano type bell push or 2 pin socket etc. complete in all respect.

Supply and wiring of submain in PVC conduit with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with one number 2.5 sq. mm. multistrand copper conductor cable as earth continuity wire drawn in conduit. wire, complete in all respect

S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve CAT A

S&F of 63 Amp.TP MCB (10 KA) C Curve CAT A

S & F surface/Flush mounting 4ways TPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge.CAT A

S&F of 32 Amp. four pole change over switch on 25mm x 25mm x 3mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge.

Erection and testing of ceiling fan and regulator etc. excluding supply of down rod, complete in all respect.

Supply and fixing of fan hook fabricated from M.S. rod for ceiling fan each.

Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.

10 sq. mm 4 core

70 sq. mm 3-1/2 core

Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/ coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing (This will apply for earthing of poles also).

Supply and fixing of electronic fan regulator 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 30Watt. to 40 Watt. Confirming to IP 66 protection complete in all respect.CAT-AAA

Supply and fixing of call bell of approved make on polished MDFEG/ Teak ply board including making connections etc. complete in all respect.

ASHOK KUMAR THEKEDAR

M/S ADESH KUMAR THEKEDAR

M/s VINAY KUMAR CONTRACTOR

M/s R.V.S. Construction

DINESH CIVIL CONSTRUCTION CO.