WBPHED/AE/CMSD/eNIT01/S03

Amount

Carrying charges for carrying one nos 15 HP pump motor set to bhatar water supply scheme including loading & unloaidng complete as per direction of E.I.C.

1.1 KV grade 4 sq.mm x 3 Core water proof flat submersible cable for above motor.

Supply and Delivery of 16 mm², 1.1 KV grade. 3 core Al Armoured XLPE conform to IS 1554/7098(part-I) 1998 (Make : Gloster /HAVELLS /MESCAB/ CURRENCY/POLYCAB/ CRYSTAL/ Approved Make)

FASD Three Phase 415 v ,Submersible Pump starter contactor rating 16A with short circuit protection (with auto switch).(relay range 13.2-20 amp).make- BCH/approved make

100 Amp. Re-wireable type TPN main switch (CONFORMS: IS/IEC600947-1&3). (Make: Approve make of P.H.E. Dte.)

100 Amp. 4 way Copper busbar chamber box by 16 SWG sheet steel enclosure including porcelain chair etc.. (Make: Approve make of P.H.E. Dte.)

25 sq.mm 3.5 core 1.1KV PVC/XLPE insulated aluminium armored cable. (Make: Approve make of P.H.E. Dte.)

Supply and delivery of the following valves, pipes and specials etc at site:

3 mtr long 80mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG.

1.5 mtr long 80mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG.

80mm dia. CI Top & bottom adopter

3 " dia. X 5 ft long M.S. (7.1 mm Thick) Column pipe having both side 11 TPI Thread and Socket.

Heavy type suitable dia. MS suspension clamp along with nuts bolts and washers .

80mm dia. Non-rising spindle sluice valve (PN-1.0 rating) as per IS14846 for wash out and delivry line, Make: IVI/Jupiter/Cair/approved make. MOC & TC needed for valve.

80mm dia. N.R.V (PN-1.0 rating) as per IS5312, Make: IVI/Jupiter/Cair/approved make. MOC & TC needed for valve.

CIDF 90°bend-1no., CI flanged tee-1no. blank flange-1no., CI/ MS flanged short piece 0.50 mtr.-1no, CI/ MS flanged pipe 1 mtr. -1 no. et cas required (as per IS specification and certification registered) for construction of delivery pipe line and wash out line.

Heavy type 250mm dia split type tube well cover with 12 mm thick clamping arrangement including holes of column pipe, air pipe and cable entry with 2 sets heavy type suspension clump, nuts, bolts and washer as per departmental design.

Pressure gauge 102 mm. dia and 7 kg. /cm2 range, brass cocks and fitting complete (Make- H.Guru)

Anti snapping safety device for pump set by supplying suitable size or MS angle busket and nylon rope of required length including supplying of nuts, bolts and all other materials.

Installation of above pump motor,main switch, valves and specials including supply of cable gland, sockets and power line connection to the existing Panel, etc as required to complete the job as per direction and and all connection with supply necessary materials, cable etc to complete the work, making arrangement with supply & fitting of materials for taking power with in the pump house from WBSEDCL end as per direction of EIC.

Making brick pillar supporting pipe line (10' x10'x 4ft/ Suitable height) by first class brick work with plaster & net cement punning complete including earth cutting, supply necessary materials, ramming as per direction of EIC.

Making of tubewell foundation (size- 3'x 3'x 3.5' approx) as per site situation including supply of necessary materials as bricks, sand, cement, stone chips etc. with plastering & neat cement finishing to complete as per direction.

Making suitable foundation for kiosk box of 2.5' x1'0"x5'0"/Suitable with supplying of necessary cement, sand and stone chips including plastering and net cement finish complete.

Suitable kiox box for cable connection of submersible pump motor set with Degree of protection IP 65 including suitable legs and 6 Nos. Al. Bus bar for 32 Amps and all necessary earthing arrangement and insulator as per direction of EIC.

Laying of two cables upto 35 sqmm in an underground trench in single tier formation (horizontal), the trench size : 680 mm x 760 mm average depth, with brick protection on the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed.

Supply, delivery and storage at site of automatically controlled diaphragm type chlorinator dosing pump with flow rate 100 LPH and maximum pressure of 10Kg/CM2 with all accessories for pump & motor, foundation bolt, suction and discharge Flange and with storage tank of dosing solution of 100Ltr. Capacity and the prime mover to be coupled with pump of 0.5 H.P. 3 Phase, 1450 RPM squirrel cage TEFC induciton motor, Motor will be IE2/IE3 (Make of Machine : Swelore/Any other approved, Make of Motor : ABB / CGL /KEC / Any other approved make)

Supply & delivery of Starter for chlorine motor (relay range-1-1.5 Amp) (approved make)

Supply & delivery of M.S Kiox box for installation of chlorine machine at out side consist of 16 SWG M.S sheet (size- 4'x 21/2'x 4') and the frame consist of 11/2" x 11/2" x 5 mm thick and 11/4 " x 11/4" x 5 mm thick M.S angle after welding finished by powder coated paint as per direction.

Making brick foundation (size- 4' x 21/2' x 11/4') for installation of M.S Kiox box with supplying bricks, sand, cement etc including plastering and neat cement complete as per direction.

1.1 KV grade 6 sq.mm 3 Core water proof flat submersible cable .

Supply and fitting and fixing 25 mm PVC pipes of approved make of schedule 80(medium duty) conforming to ASTMD- 1785 and threaded to match with GI pipes as per IS: 1239 (part- I) with all necessery accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece, etc. fitted with holder bats, clamps, including cutting pipes, making threads, fitting,, fixing,etc. complete in all respect for chlorine dosing solution including cost of all necessery fittings as required, jointing materials and two coats of painting with approved paint in any position above ground.

Installtion and commissioning of above supplied chlorinator with all accessories, PVC tank and drawing of power line as per IE rules by supplying of necessary wire and continuous earthing. This include the cost of all necessary CC foundation [at least 200mm height] with concrete mixture [sand, cement, stone chips] and neat cement finish by supplyig of all required materials and testing the entire set as per direction of EIC.

Add GST @ 18%

Add Cess @ 1%

CHATTERJEE ENTERPRISE (BID ID -6325470)

SUBRATA BHADRA (BID ID -6325495)