SPECIAL REPAIRS TO CERTAIN BUILDING AND CONNECTED B/R WORS AT VAYU VIHAR UNDER GE BRICHGUNJ.

Amount

Dismantling of Dismantling boarding, any description, fixed in any position with nails and any thickness, fixed in any position complete all as specified and directed.

Post ConstructionTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

S&F Butt hinges, medium weight coldrolled mild steel and fixed 50mm size complete all as specified and directed.

Supply & Fixing mild steel 40mm dia Brass polished cupboard knobs fixed with nut, screw and washer off complete all as specified and directed.

S & F 24 Inches (Maximum) Telescopic Drawer Channel Stainless Steel | Rust Free | 600mm Ball Bearing Soundless Office Table Drawer Slides Pack of 1 Set (2 pcs) complete all as specified and directed.

S & F 30 mm width of flap Continous (Piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F 75mm size hasp and staple, safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F Aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangement etc, complete with standard aluminium sections, all as specified and as directed by Engineer-in-charge. (Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified and directed.

S&F 150mm long extruded aluminium alloy anodised handles fabricated type, anodised complete all as specified and directed.

S&F 75mm long extruded aluminium alloy anodised handles fabricated type, anodised complete all as specified and directed.

S&F 100 Butt hinges extruded aluminium alloy, anodised. With galvanished mild steel hinge pin , anodised and fixed type B-21 complete all as specified and directed.

S&F sheet glass ordinary Quality and glazing with oil putty in square exc 0.5 sqm in each pane of thickness 6.3 mm complete all as specified and directed.

M&L for 12-16 mm thick MDF board of any Colour to fixed with screws to timber frame work. Or Fixed wirh aluminiun frame work to the fixing Clips all as specified and as directed (Note :- Colour as finalised by GE) complete all as specified and directed.

M&L for 12 mm thick prelaminated particle board to fixed in repair interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed.

S&F aluminium composite panel sheet of 3mm to 4mm thick, fixed on aluminium frame work for door and cup board works fitted with Rubber Cascade strips complete all as specified and as directed.

S&F aluminium composite panel sheet of 3mm to 4mm thick, fixed on aluminium frame work with plastic strips (double sided sticker) of suitable size of varying thickness of 10mm to 30mm applying adhesive over aluminium sections for fixing composite panel and fixed with screws. The joints of panels shall be filled with weather proof sealant for required portion, complete all as specified and as directed.

Taking down cement plaster any description incl racking out joints, hacking for key scrubbing down with water, etc complete all as specified and directed.

M & L for rendering 10 mm thick in CM I:6 finished even and smooth without using extra cement etc complete all as specified and directed.

M&L Rendering 15mm thick in two coat ie. 10mm thick under coat in CM 1:6 and 5mm thick finishing coat in CM 1:4 finished even & smooth without using extra cement using 2% of WPC complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M & L for rendering 5 mm thick in CM I:3 on for ceiling surfaces, finished even and smooth without using extra cement etc complete all as specified and directed.

M&L for oil bound distempering two coats over a coat of alkali resistant priming paint including preparation of new plastered or unplastered surfaces of wall complete all as specified and directed.

All as per item no. 23 above but on ceiling complete all as specified and directed.

M&L for One coat of oil bound distemper Including one coats of alkali resistant priming paint Over a coat of putty including preparation of Old plastered or unplastered surfaces of wall complete all as specified and directed.

All as per item no. 25 above but on ceiling complete all as specified and directed.

M&L for two coat oil bound distemper two coats including one coat of alkali resistant priming paint over a coat of putty including preparation of Old plastered or unplastered surfaces of wall complete all as specified and directed.

All as per item no. 27 above but on ceiling complete all as specified and directed.

M& L for Finishing walls with Acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and directed.(Make Apex Ultima)

Preparation of old external surfaces of walls, Facias, cornices etc and applying one coat of weather proof anti fungal paint (Apex - ultima) including a coat of Putty on walls all as per manufacturer instruction and complete all as specified and directed.

M & L For Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

A N KUMAR

M/s Karbhagam Sales Agency

ANITA VARMA ENTERPRISES

M/s Kamal Electrical

Nirman Construction Company

M/s Saina Enterprises

P Babu