Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.6 LAccepted-AOC B 150 GROUND FLOOR BACK SIDE PANDAV NAGAR DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | L1 | Accepted-AOC L1 | |
| 2 | L2₹21.0 L+₹44,197.60 (2.14%)Rejected-Finance RANGIYA DIST KAMRUP ASSAM 781365 | BAKSA | ASSAM | 781365 | L2 | Rejected-Finance Other than lowest. | |
| 3 | L3₹21.5 L+₹92,171.90 (4.47%)Rejected-Finance 136 P NEW PROJECT ROAD NANDA NAGAR KUNRAGHAT GORAKHPUR UP PIN 273008 | GORAKHPUR | GORAKHPUR | UTTAR PRADESH | 273008 | L3 | Rejected-Finance Other than lowest. |
| Sl No | Description | Qty | Unit | M/S NARAYAN ENTERPRISE L2 | PAPPU ROY CONSTRUCTION L1 | H AND Y GROUP L3 |
|---|---|---|---|---|---|---|
| 1.00 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in SOFT/LOOSE soil complete, all as specified. | 27 | Each | 60 ₹1,620 Lowest | 150 ₹4,050 | 500 ₹13,500 |
| 2.00 | Cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate), finished even & rough, as in foundation filing and mass concrete, complete all as specified. | 4.95 | Cubic Metre | 3,400 ₹16,830 Lowest | 4,500 ₹22,275 | 6,000 ₹29,700 |
| 3.00 | Rolled mild steel work as in tubular trusses including special shaped washer etc using ERW or induction butt welded tube conforming to IS 1161-1979 grade St -240 complete all as specified. quality-A complete all as specified | 4,000 | Kilogram | 153 ₹6,12,000 | 130 ₹5,20,000 Lowest | 150 ₹6,00,000 |
| 4.00 | Mild steel work plates ( plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes without any attachment confirming to Fe-410 -Gde E-250, quality-A complete all as specified | 400 | Kilogram | 158 ₹63,200 | 110 ₹44,000 Lowest | 150 ₹60,000 |
| 5.00 | Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks or steel wire staples all as specified. | 4 | Square Metre | 560 ₹2,240 | 600 ₹2,400 | 500 ₹2,000 Lowest |
| 6.00 | 04 levers brass mortice lock, vertical type, 100 mm size, with 2-3 keys, complete all as specified. | 2 | Each | 340 ₹680 Lowest | 500 ₹1,000 | 1,000 ₹2,000 |
| 7.00 | Double action floor door spring, hydraulically regulated, made of 1.25 mm thick aluminium alloy sheet, foundation box main body with stainless steel cover, governing pivot made of brass, rest of part made out of heavy duty mild steel, ISI marked, complete. | 3 | Each | 550 ₹1,650 Lowest | 1,900 ₹5,700 | 15,000 ₹45,000 |
| 8.00 | Powder coated aluminium frame for doors, windows, ventilators, fixed glazing with one or more rebates including joining cleat for fixing, fixed to opening with suitable size steel screws and rawl plugs etc., (aluminium section not less than 2 mm thick) complete all as specified.
NOTE:- Minimum thickness of powder coating shall be 50 micron. | 72 | Kilogram | 980 ₹70,560 Lowest | 1,200 ₹86,400 | 1,000 ₹72,000 |
| 9.00 | Powder coated aluminium door shutters (Aluminium section weighing 0.55 kg/m) with styles & rails , anodised alumnium glazing snap beading, rubber neoprene packing including joining cleats & screws etc as per manufacturers instructions, complete all as specified.
NOTES:
(a) Each shutter shall have 2 Nos. 200 mm long almn handles and 03 No. 100 mm size stainless steel/almn butt hinges.
(b) Glass and other filling materials in panels including wire cloth and almn grill shall be measured & paid for separately under respective item of BoQ.
(c) For powder coated aluminum sections minimum thickness of powder coating shall be 50 micron.
(d) Aluminium section weighing 0.55 kg/m | 8 | Square Meter | 7,800 ₹62,400 | 6,200 ₹49,600 | 5,000 ₹40,000 Lowest |
| 10.00 | Powder coated aluminium window and ventilator shutters (Aluminium section weighing 0.55 kg/m) side hung type with styles & rails , anodised alumnium glazing snap beading , rubber neoprene packing including joining cleats & screws etc as per manufacturers instructions, complete all as specified.
NOTES:
(a) Each shutter shall have 2 Nos. 125 mm long almn handles and 02 No. 75 mm size stainless steel/almn butt hinges & one no. almn hook & eye.
(b) Glass and other filling materials in panels including wire cloth and almn grill shall be measured & paid for separately under respective item of BoQ.
(c) For powder coated aluminum sections minimum thickness of powder coating shall be 50 micron. | 16 | Square Meter | 7,600 ₹1,21,600 | 6,200 ₹99,200 | 5,000 ₹80,000 Lowest |
Tender Value
₹25.3 L
EMD Value
₹50,540
Closing Date
20 Jul 2026, 6:00 pmClosed
GARRISON ENGINEER AIR FORCE BIHTA
Military Engineer Services AF Stn Bihta 801103
ADDN/ALTN TO BLDG NO. P-71 AND CERTAIN E/M AND B/R WORK IN RANADAS SECTION AT AF STN DARBHANGA UNDER GE AF BIHTA.
2026_MES_774006_1
GE/AF/BHT-13/2026-27
Open Tender
Civil Works
Item Rate
180 days
DARBHANGA UNDER GE AF BIHTA
Refer NIT and Tender Documents
8 documents required · 8 mandatory
₹500
GE AF BIHTA
₹50,540
Yes
25 Sept 2026
22 Jun 2026
22 Jul 2026
22 Jun 2026
20 Jul 2026
7 Jul 2026
22 Jun 2026 - 6 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in SOFT/LOOSE soil complete, all as specified. | 27 | Each | - | - |
| 2 | Cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate), finished even & rough, as in foundation filing and mass concrete, complete all as specified. | 4.95 | Cubic Metre | - | - |
| 3 | Rolled mild steel work as in tubular trusses including special shaped washer etc using ERW or induction butt welded tube conforming to IS 1161-1979 grade St -240 complete all as specified. quality-A complete all as specified | 4,000 | Kilogram | - | - |
| 4 | Mild steel work plates ( plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes without any attachment confirming to Fe-410 -Gde E-250, quality-A complete all as specified | 400 | Kilogram | - | - |
| 5 | Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks or steel wire staples all as specified. | 4 | Square Metre | - | - |
| 6 | 04 levers brass mortice lock, vertical type, 100 mm size, with 2-3 keys, complete all as specified. | 2 | Each | - | - |
| 7 | Double action floor door spring, hydraulically regulated, made of 1.25 mm thick aluminium alloy sheet, foundation box main body with stainless steel cover, governing pivot made of brass, rest of part made out of heavy duty mild steel, ISI marked, complete. | 3 | Each | - | - |
| 8 | Powder coated aluminium frame for doors, windows, ventilators, fixed glazing with one or more rebates including joining cleat for fixing, fixed to opening with suitable size steel screws and rawl plugs etc., (aluminium section not less than 2 mm thick) complete all as specified.
NOTE:- Minimum thickness of powder coating shall be 50 micron. | 72 | Kilogram | - | - |
| 9 | Powder coated aluminium door shutters (Aluminium section weighing 0.55 kg/m) with styles & rails , anodised alumnium glazing snap beading, rubber neoprene packing including joining cleats & screws etc as per manufacturers instructions, complete all as specified.
NOTES:
(a) Each shutter shall have 2 Nos. 200 mm long almn handles and 03 No. 100 mm size stainless steel/almn butt hinges.
(b) Glass and other filling materials in panels including wire cloth and almn grill shall be measured & paid for separately under respective item of BoQ.
(c) For powder coated aluminum sections minimum thickness of powder coating shall be 50 micron.
(d) Aluminium section weighing 0.55 kg/m | 8 | Square Meter | - | - |
| 10 | Powder coated aluminium window and ventilator shutters (Aluminium section weighing 0.55 kg/m) side hung type with styles & rails , anodised alumnium glazing snap beading , rubber neoprene packing including joining cleats & screws etc as per manufacturers instructions, complete all as specified.
NOTES:
(a) Each shutter shall have 2 Nos. 125 mm long almn handles and 02 No. 75 mm size stainless steel/almn butt hinges & one no. almn hook & eye.
(b) Glass and other filling materials in panels including wire cloth and almn grill shall be measured & paid for separately under respective item of BoQ.
(c) For powder coated aluminum sections minimum thickness of powder coating shall be 50 micron. | 16 | Square Meter | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.39 MB
Tender132627.pdf
Tender Documents • 1.20 MB
BOQ_866687.xls
BOQ • 0.43 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .