Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.6 LAccepted-AOC | L1 | Accepted-AOC Lowest bid Found in Order | |
| 2 | L2₹36.6 L+₹1.7 L (5.02%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest bid | |
| 3 | L3₹37.5 L+₹2.6 L (7.56%)Rejected-AOC | L3 | Rejected-AOC Other than Lowest bid | |
| 4 | L4₹41.4 L+₹6.5 L (18.7%)Rejected-AOC | L4 | Rejected-AOC Other than Lowest bid | |
| 5 | L5₹41.4 L+₹6.5 L (18.7%)Rejected-AOC | L5 | Rejected-AOC Other than Lowest bid |
Tender Value
Refer Docs
EMD Value
₹64,000
Closing Date
10 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 874 EWS C/O 56 APO
GE 874 EWS C/O 56 APO
SPL REPAIR TO BLDG NO T 47 AND T 51 OF DIV CAMP AND PROVN OF ORS BATHROOM AND TOILET AND ALLIED INFRA AT 57 RR UNDER STN HQ ZANGLI
2023_MES_619277_1
GE 874/EWS-54/2023-24
Open Tender
Civil Works
Item Rate
180 days
Kupwara
As per NIT and tender documents
7 documents required · 7 mandatory
₹500
GE 874 EWS
₹64,000
Yes
10 Nov 2023
18 Sept 2023
17 Oct 2023
18 Sept 2023
10 Oct 2023
3 Oct 2023
18 Sept 2023 - 25 Sept 2023
Amount
BR and EM Portion
Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil for roads to required slope gradient, camber etc complete all as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Excavating over areas, n exc 1.5 m deep and getting out soft/hard soil complete.
M & L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken bricks complete all as specified and directed.
M & L Plain Cement concrete in foundations, filling and mass concrete 1:4:8 type D 2 ( 40mm graded aggregate) as in fdn, filling and mass concrete complete all as specified and directed.
M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and directed.
M & L 25 mm thk Damp proof course in CM 1:2:4 type B-0 to horizontal or vertical surfaces including necessary formwork using WPC as per manufacturer's instructions complete all as specified and directed.
Supply only liquid water proofing compound.
M & L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed.
M & L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed.
Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M & L 75 mm thick Cement concrete 1:3:6 type C 2 ( 40mm graded stone aggregate) as in sub base filling complete all as specified and directed.
Non - skid Ceramic tiles 7 to 8 mm thick coloured (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.
M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4 complete all as specified.
M & L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4, complete all as specified and directed.
M&L for Glazed ceramic tiles(coloured tiles) in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified.
M&L for RCC 1:2:4 type B1 (nominal mix) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L TMT Bars 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete.
M&L for prepration of new plaster surface of wall and applying three coat of white wash complete all as specified and directed.
M&L for prepration of new plaster surface of wall and applying two coats of cement paint complete all as specified and directed.
S&F 15 mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe (minimum wt 90 gm) complete all as specified and directed.
M&L for galvanised steel tube medium grade 15 mm dia fixed to wall or celing or laid under floor , complete with necessary fitting all as specified and directed.
M&L for CI nahani trap 75 mm dia with grating including Each joint to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed..
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification.
S&F 75mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete.
S&F 100 mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete.
S&F 250 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete.
S&F 75 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete.
S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete.
S&F 125 mm Cast iron or malleable cast iron handles, cast type, stove enamelled black complete.
Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe.
S&F Grating doom 100 mm dia of PTMT (Minimum weight 25gms).
S& F 15mm dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.
S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.
S&F 100mm cast iron sanitary connection socket to fit WC out-let complete.
S&F 10 Ltr Capicity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet,ball valve, float and handle including brackets as fixed in repair.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as speccified.
S&F Waste pipe coupling of PTMT (Half of full thread ).(minimum weight 32mm 45gm/40gm-60gm) complete all as specified.
M&L for RCC Design Mix M-25 Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles complete all as specified.
M&L for RCC Design Mix M-25 Columns, pillars, piers, posts and struts complete all as specified.
M&L for RCC Design Mix M-25 Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.
S&F 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.
S&F 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed
PVC Connection 15 mm size PTMT Nut of length 600 mm.
S&F for Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete with fixing.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified.
M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified.
M&L for Formwork to sides and soffits of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified.
6mm Thick E board (classic) of size 610X610mm as in false ceiling fixed with aluminium snap grid frame work of same size as aluminium tee of size 25X25X1.50 mm as main runner, 25X25X1.25mm thick aluminium Tee as cross runner and aluminium angle of size 25X25X1.25mm at the perimeter including GI 6mm adjustable suspender of required length of any description (Note:- The design and specification of the ceiling board to be approved by AGE/GE) complete all as specified and directed.
M&L Second class softwood as in scantling, clean sawn fixed in position with nails, unframed work, complete, all as specified and directed by Engr-In-Charge.
M&L 6 mm thick plywood BWR type BB fixed with nails to timber frame work in walls. (5 nos of ply ) complete.
M&L for two coat of synthetic enamal paint over one coat of pink primer by preparing of new wooden surfaces of any description, not otherwise described over 10cm width or girth .
S&F 15 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified.
S&F 15 mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete.
S&F 15 mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, fancy type, screwed for iron pipe and fixed complete.
S&F 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete.
M&L Surfaces of any description, over 10cm in width or girth,not otherwise described with rex oxide and two coat of synthetic enamel paint on steel surface complete.
S&F second class softwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete.
S&F 30 mm Glazed and skeleton shutters, (first class softwood) open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete.
S&F 30mm Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete.
S&F 150 mm Salt-glazed stoneware drain pipes laid in trenches and jointed as specified complete.
S&F 150 mm Salt-glazed stoneware drain bends and taper bends, any radius laid in trenches and jointed as specified complete.
M&L for PCC (1:3:6 type C2) concrete bed to drain pipes 150 mm including forming cradles; in complete.
S&F 3 mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete.
S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed by Engr-in-charge.
Dismantling wall and ceiling boards ( fibre, pulp, insulation, etc) or insulation ards/slabs/blankets, any thickness including cover fillets. all as specified and directed by Engr-in-charge.
Dismantling boarding, any description, fixed in any position with nails all as specified and directed by Engr-in-charge.
Dismantling unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.
Taking down chowkats or frames with shutters (W/O taking off shutters ) exc 1.5 sqm but n exc 4 sqm each and removing from site.
Taking down chowkats with shutters (without taking off shutters from the frame) n exc. 1.50 sqm each & removing from site.
Dismantling floor, hearth or wall tiles including cement mortar bedding complete.
Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete.
Veneered decorative plywood 6mm thick, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work fixed in ceiling, flat/sloping.
Veneered decorative plywood 9mm thick, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work fixed in wall.
S & F for clean sawn 25mm thick 2nd class softwood with butt joints boarding, fixed with nails in any situation complete all as specified and directed
M&L for preparing old decorated plastered surfaces of wall including cornices,pilastered etc. by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying two coat of cement base paint on wall surface complete all as specified and directed.
M&L for cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in 50mm thick sub base for floor finieshes all as specified and directed by Eng-in-Charge
S&F 100mm Aluminium handles, cast type, anodised
S&F 150mm Aluminium handles, cast type, anodised
S&F 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed
S&F 100mm Aluminium anodised, barrel tower bolts of extruded section and fixed
S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete
S & F stainless steel drappery or curtain rods, 25 mm dia, with end brackets, decorative type, cut to length as required size, colour coating including matching socketed brackets, complete all as specified and directed.
Taking down copper/aluminium point wiring ( light fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) asd making good distribued surface of wall , floor etc complete all as specified and directed.
Point wiring for one light point/Ex/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead in and including cable 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab Note - Wiring will be as per SSR Part-I and Part II Spoecification and wire will be orignate in DB and end in lt end.
Point wiring for 5 pin 5A socket outlet independent point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab Note - Wiring will be as per SSR Part-I and Part II Spoecification and wire will be orignate in DB and end in lt end.
All as per item above but wiring with 2.5 sqmm copper wire ( FRLS) and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board complete as directed by engineer in charge .
Supply & fixing Switch piano type flush 6 Amp Single pole one way ( ISI Marked) complete all as specified and directed. Make : Havells/Anchor
Supply & Fixing Socket outlet 2 in1, 3 pin 5 Amps flush type complete all as specified and directed.Make : Havells/Anchor
S&F Switch socket combination 5 in 1, 5 and 15 Amp flush type universal controlled by one switch (ISI marked) complete all as specified and directed.
Supply & Fixing ceiling rose surface backelite 65x50mm two to three terminal (ISI marked).Make : Havells/Anchor
Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, conf to Cat Pt No 6077 11 of Legrand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .
Supply & Fixing RCBO, single pole and neutral (SPN) 30mA, 240V , 32 Amp all as specified and directed. Make- Havelles/MDS/Legrand.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.
Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3cm thick burried directly in ground ( earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanised iron wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test all as specified or indicated including testing on completion.
M&L for LED Batten 1x20 W for regal batten for LED Universal batten for G 13 T with 18 W tube rods and Ultra bright LED Polycarbonate tube light very high efficiency suited for installation in existing T8 and connecting electrically using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed by Engineer-in-Charge.
Supply and fixing of wall fan of 400mm sweep omplete all as specified and directed
Supply and fixing of Weather proof PVC flat twin core cable of size 10 sq mm complete all as specified and directed
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.
M&L Point wiring with 1.5 Sq. mm (nominal area) HR-FRLS PVC insulated and unsheathed multistranded copper conductor cable 1100 Volts grade drawn through and incl PVC rigid concealed conduit (ISI Marked) suitable size with all accessories having thickness not less than 1.8mm incl sheet steel/ CI terminal box of adequate size having thickness not less than 2mm including 3mm thick hylem/masonite sheet including 1.5 Sqmm FRLS PVC insulated unsheathed copper conductor multistranded cable of green colour as earth conductor connected to common earth dolly complete all as specified and directed for one light / fan point controlled by one switch 5 Amp, SP, one way, 240 Volts. Note: 1. Connections of cable with MCBs/Switch Sockets shall be done through proper size copper/brass thimbles. 2. Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit in not feasible. 3. Proper colour code will be used for wiring as per the electrical rule and as directed.
M & L for point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor HR-FRLS cable with in and including PVC concealed conduit heavy duty 20mm dia having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface finishing the surface to match with the existingsurface complete all as specified and directed.Note: (a) Insulation test of point wiring (b) colour coding is to be maintained
S & F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.
S & F socket outlet 2 in 1, 3 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.
S & F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed.
S & F LED BULB, B22 type ,14 watt,complete all as specified and directed.
S&F 20W surface / wall mounted batten LED luminair, extruded aluminium housing with PC diffuser and ind electronic driver with high efficiency long life, CRI = 80 (Minimum), PF > 0.95, luminous efficacy > 100 lumens/Watt operating voltage 140V-240V, CCT (K) > 6500, THD < 10% complete including 20W LED tube rod with all accessories internally prewired and including connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose to connector of LED fitting complete all as specified and directedories prewired and including making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete
S&F in replacement sleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet long of same make having ballast , bipin holder, connector block etc. complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core complete all as required at site or directed.
S&F in replacement Energy saving, surface mounted, bulk head LED luminaire 10 W with PDC aluminium housing and polycarbonate diffuser with IP 66 protection complete including connecting up with three core twisted flexible copper conductor cable of suitable size.all as specified
M & L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing MS ventilating fans Single phase, 230 volts 300 mm or complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge.
S & F of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed by Engr-in-charge.
S&F MCB SPN 240V, 50Hz, 10 KA, 'B' curve of rating 6-32 Amp all as specified and directed.
M&L for sub Main Wiring with 2 run of single core, 6 Sqmm HR- FRLS PVC insulated and unsheathed, multi starndedcopper conductor cable using colour code for phase red and neutral black with and including 6 Sqmm FRLS PVC insulated and unsheathed copper conductor cable in green colour as earth conductor connected to common earth dolly, drawn in and including concealed PVC rigid conduit of suitable size having thickness not less than 1.8mm (ISI marked) with and including all accessories complete and making good to disturbed surface of wall/floor with cement mortar and finishes to match existing surface including taking down of existing unserviceable surface/cocealed sub main wiring any type complete all as specified and directed. Note: Two run of submain wire (phase and neutral), and one run of earth including PVC conduit and accessories will be measured as one run.
S & F bldg secuirty light fitting energy saving high efficiency LED street light fitting 30 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 32 mm dia bent to shape having length on less than 1.5 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage.
M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (Earth pit not less than 2.25 metre deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as showin in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust, common salt all around Earth plate upto 150 mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40 mm thick RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregrate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including test on completion. (Note :- The rate quoted include cost of min 7.5 metre earthing wire)
Supply and Intsall Centralised Water Heater Facility with water heating plant of 500 LPH, capable of heating 500 litres of water at 2 degrees celcius to 50 degrees celcius in 40 minutes (or 65 degrees, as required at site. But when 65 degrees celcius is required, then time may be more for heating), with puffed glass wool/ polyurethene insulation (of thickness and density as directed at site by engineer in charge) over the boiler, boiler tank and pipelines, all covered with aluminium cover, digital temperature controller, electronically controlled burner, water temperature gauge, nylon braided fuel pipes, flue gas chimney and exhausts (insulated with POP ropes), fuel boiler, fuel level indicator, fuel burner, capable of running in Kerosene and Diesel, boards (for instructions, caution and installation names), necessary electrical wiring, necessary GI gate valves, GI fittings and GI medium grade pipes (of any length (from existing tank to boiler, from boiler to lower tank and from lower tank to upper tank, from upper tank to bathrooms) as required at site) including polyurethene (covered with aluminium sheet and nylon cable ties) lagging as directed at site by engineer in charge, one set of beacons (to indicate plant running) and including a control panel with over current, over voltage protection circuits, Ampere meter, Voltage meter, power factor meter, all with 24 month AMC (all included warranty). Any other necessary fittings, accessories and infrastructure required shall also be provided, as directed by engineer in charge. The make shall be of Supertherm or equivalent as approved by engineer in charge. The equipment shall have tolerence for any soil/ dirt/ water in fuel as applicable in field conditions in Army locations in Kashmir valley. In case of any doubt regarding electrical and plumbing requirement, the direction of engineer in charge will be final. Staging for tanks mentioned below are also included.
Material, Hoisting, Fixing and Labour for Rotational moulded polyethylene water storage tank of capacity of 1000 litres (cuboidal (or cylindrical if approved by engineer in charge) vertical with closed top), for hoisting into position either inside or outside of building, connecting up pipes, securing access covers etc., with monkey-proofing mechanism, hoisted and fixed in position all as specified in SSR Part I
Material, Hoisting, Fixing and Labour for Rotational moulded polyethylene water/ fuel storage tank of capacity of 250 litres (cylindrical/ cuboidal vertical with closed top), for hoisting into position either inside or outside of building, connecting up pipes, securing access covers etc., with monkey-proofing mechanism, hoisted and fixed in position all as specified in SSR Part I
Supply and fixing analogue/ digital temperature gauge (for measurement of temperature in water tank), IP67 rated, rainproof and snowproof, with separate sensor and gauge fixed upto 1.5 meters away
Material and Labour for Plain Cemented Concrete in Foundation, of type B2, ratio 1:2:4, 40 mm graded aggregate, laid in foudations (or anywhere else)
Material and Labour for fixing ibid tank with a head of 2 meters above the roof of the heighest bathroom for which the heater pipes are provided, either by having a staging from ground level or by making suitable modifications in the walls of the building, including any RCC concrete, Brick work, structural steel work, cover for tank, plastering work, welding work or any other work required, complete, all as specified, clarified and directed by engineer in charge
Supply and Fixing, Single Phase, electric motor water pump, with separate starter, self priming type, with 25 meter head, 0.5 HP (or any other higher capacity as required), for pumping hot water, complete with all plumbing and electrical fittings, all as clarified, specified and directed by engineer in charge. Make : Kirloskar, Crompton Greaves, Crompton or equivalent from the list of approved brands in MES
Supply and install auto switch on and Switch off mechanism for above motor pump (based on sensors in upper tank and lower tank), IP67 rated, with all necessary electrical, electronic and mechanical fittings, complete, all as clarified, specified and defined by engineer in charge. The controller shall have system to protect motor when lower tank is dry and correspondingly avoid dry running of motor.
Supply & Fixing 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge
Material & Labour for Lagging to pipes of internal dia 25mm used in internal/External water supply or plumbing all round with,25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 Complete all as specified and directed by Engr-in-Charge
M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified
M&L for Brick covering with equal to length of brick as mechanical protection to cable with well burnt sub class 'B' bricks laid as directed.
Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core.
Supply and Laying in trenches GI tubing 25 mm bore "medium" grade in new or old direction including necessary screwing and all fittings ( Tee,union, nipple, reducer, elbow etc) as required at site complete as specified and directed by Engr-in-Charge for the following sizes :-
Lagging to pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 for 20 mm dia pipeline complete all as specified and directed.
S&F gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 20 mm complete all as specified and directed by Engr-in-Charge.
Cutting of Existing GI Pipe of Size 25/40/50 mm dia and and threading of existing pipe with die set comple and fitting of GI Tee for suitable size for fixing of GI pipe 20 mm bore complete all as specified and directed
M/S AB AHAD RATHER
M/S SAJAA CONSTRUCTION COMAPNY
M/S ASMATULLAH SHAH
M/S MOHD YOUSUF CONSTRUCTION CO
M/S ABDUL AZIZ MIR
M/S LONE CONSTRUCTION COMPANY
M/S SS SHAH WALI & CO
Bidder Name
M/S AB AHAD RATHER
M/S SAJAA CONSTRUCTION COMAPNY
M/S ASMATULLAH SHAH
M/S SS SHAH WALI & CO
M/S ABDUL AZIZ MIR
M/S MOHD YOUSUF CONSTRUCTION CO
M/S LONE CONSTRUCTION COMPANY
M/S MYL CONSTRUCTION COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .