REPAIR/REPLACEMENT OF DOORS/WINDOWS JOINERY, ROOF SHEETS AND CONNECTED ITEMS AND OTHER MISCELLANEOUS B/R WORKS AT SMQ AND HQ AREA AT AF STN DIGARU.

Amount

Taking down chowkhats or frames n.exc 1.5 sqm each with shutter (without taking of shutters from the frames)

Taking down chowkhats or frames exc 1.5 sqm but not exc 4 sqm each with shutter (without taking of shutters from the frames) complete all as specified and as directed.

S&F for 2nd hard wood for plain solid straight chowkats & frame wrought framed related on the solid rounded or chamfered, put together with glue pined at joints complete all as specified and as directed.

S & F Pressed steel frames for doors (size 125*60 mm ) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directed.

S&F Pressed steel frames for doors ( size 105x60mm) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

M&L for PCC 1:3:6 type C-0 using 12.5 mm graded aggregate as in back filling of hold fast complete all as specified and directed.

Refixing in the same opening shutter of any description exc 1 sqm and n.exc. 2 Sqm each obtained from taking down.

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on the both side complete all as specified and directed.

S&F 35mm thick glazed and skelten shutter open rebated and prerepair to receive glass, gauge etc. without sash bars, edge of framing, plain/chamfered or rounded, fitted with cut and metered beads with first 2nd class hard wood complete all as specified and as directed.

Ditto as per Ser item No. 9.00 above but divided into squares, with plain, chamfered or roun ded, mitred and rebated sash bars, any numbers complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube Supplying & Fixing in opening as per specification and drawing, incl making good (such as rendering and white wash matching to exixting surface) to the existing surfaces complete all as specified and as directed.

S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing shown on page -156 of MES SSR Pt-II complete all as specified and directed

S&F aluminium anodised barrel tower bolt of extruded section 150 mm long complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 125 mm long complete all as specified and directed.

S/F Aluminium alloy, anodised, sliding door bolt 250 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F 100mm stainless steel butt hinges

S & F 75mm stainless steel butt hinges

S&F 150 mm aluminium alloy handels cast/plate type

S&F 125 mm aluminium alloy handels cast/plate type

S & F floor door stopper of aluninium alloy body and tongue, anodised 150mm long with hard drawn steel spring, fixed in floor.

S&F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium anodised fillets with screws complete all as specified and as directed.

S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

Nripen Kalita (BID ID -3098948)

M/s A R Traders (BID ID -3100616)

M/S RAJA CONSTRUCTION (BID ID -3100007)

B S ENTERPRISE (BID ID -3100562)

MS DAS CONSTRUCTION (BID ID -3100340)

M/S DAS CONSTRUCTION (BID ID -3100341)

M/s Rawat Enterprises (BID ID -3100659)

Ms N D Enterpise (BID ID -3100590)