REPAIR AND POLISHING TO ALL TYPES OF SOFA AND OTHER MISC WOODEN FURNITURE AT NAVAL BASE UNDER GE(SB) KARWAR.

Amount

Sofa single chair (MEC 2910)

(a) M & L for removing old faded rexine from seat and back cushion of sofa chair (single seater) and S & F new latherite rexine of best quality not less than Rs 275/- per metre as per sample approved for seat and back cushion complete all as specifed shown in drawing and as directed.

(b) M&L removing old unserviceable seat and back cushion with old faded rexine of sofa chair (single seater) and S & F new 100mm thick cushion (cool foam) 40 density duly upholestered / covered with new latherite rexine of best quality not less than Rs 275/- per metre as per sample approved for seat and back comp[lete all as specifed shown in drawing and as directed.

(c) Preparation of old decorated / new replaced parts /surface of sofa single chair smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

Sofa two seater (MEC 2910)

(a) M&L removing old faded rexine from seat and back cushion of sofa set (two seater) and S & F new rexine of best quality not less than Rs 275/- per metre as per sample approved for seat and back cushion complete all as specifed shown in drawing and as directed.

(b) M&L removing old unserviceable seat and back cushion with old faded rexine of sofa set (two seater) and S &F new 100mm thick cushion (cool foam) 40 density duly upholestered / covered with new rexine of best quality not less than Rs 275/- per metre as per sample approved for seat/back all as specifed shown in drawing and as directed.

(c) Preparation of old decorated / new replaced parts /surface of sofa two seater smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

Sofa five seater (MEC 2910)

(a) M&L removing old faded rexin of sofa set five seater (two single seater+ one three seater) and S & F new latherite rexine of best quality not less than Rs 275/- per metre as per sample approved complete all as specifed shown in drawing and as directed.

(b) M&L removing old unserviceable seat cushion with old faded rexin of sofa set five seater(two single seater+ one three seater) and S & F new 100mm thick cushion (cool foam) 40 density duly upholestered / covered with new rexine of best quality not less than Rs 275/- per metre as per sample approved all as specifed shown in drawing and as directed.

(c) Preparation of old decorated / new replaced parts /surface of sofa set five seater smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

Sofa five seater rexine (TP)

(a) M&L removing Old faded rexine from cushion of sofa set five seater (two single plus one three seater) and S & F new rexine of best quality not less than Rs. 275/- per metre as per approved sample for complete sofa set as per required size/shape complete all as specifed shown in drawing and as directed. Drg No :Godrej-Model No 2082(TP)

Sofa set (1+1+3) (2+3) (1) (C3/MEC/SP/205, C3/MEC/SP/202-02, C3/MEC/SP/ 200/MO-19A)

(a) M&L removing Old unserviceable cushion of sofa seat/back and S & F 100mm thick cushion (cool foam) 40 density size all as per Drg and all as specified and as direcred. Note : Single cushion seat/ back shall be measured as one unit.

(b) M&L removing old faded Tapestry cloth from seat/back cushion of sofa (single/two/three seater) by S &F new tapestry cloth of best quality not less than Rs 384/- per metre as per sample approved. size as per Drg and all as specified Note : Tapestry cloth for single seat/back shall be measured as one unit.

(c) Preparation of old decorated / new replaced parts /surface of sofa set five seater smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

Sofa set four/five seater (FD 373, FD-281)

(a) M&L removing Old unserviceable cushion of sofa seat/back and S&F New 100mm thick cushion (cool foam) 40 density size as per Drg and all as specified and as direcred. Note : Single cushion seat/ back shall be measured as one unit.

(b) M&L removing old faded Tapestry cloth from seat/back cushion of sofa Set and S &F new tapestry cloth of best quality not less than Rs 384/- per metre as per sample approved.Size al as per Drg and as directed. Note : Tapestry cloth for single seat/back shall be measured as one unit.

(c) Preparation of old decorated / new replaced parts /surface of sofa set five/four seater smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

Sofa set four/five seater (FD/MAP-II/02)

(a) M&L removing Old unserviceable cushion of sofa seat/back and S&F New 100mm thick cushion (cool foam) 40 density all as specifed shown in drawing and as directed. . Note : Single cushion seat/ back shall be measured as one unit.

(b) M&L removing old faded Tapestry cloth from seat/back cushion of sofa Set and S & F new tapestry cloth of best quality not less than Rs 384/- per metre as per sample approved. all as specifed shown in drawing and as directed. Note : Tapestry cloth for single seat/back shall be measured as one unit.

(c) Preparation of old decorated / new replaced parts /surface of sofa set five/four seater smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

Sofa Single Seater (Spl Design) (C3/MEC/SP/ 200/MO-19A)

(a) M&L removing Old faded tapestry cloth from cushion of sofa Single seater and S & F new tapestry cloth of best quality not less than Rs. 750/- per metre as per approved sample for complete sofa Single seater as per required size/shape complete all as specifed shown in drawing and as directed.

(b) Preparation of old decorated / new replaced parts /surface of sofa single seater smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

Sofa Two Seater (Spl Design) (C3/MEC/SP/ 200/MO-19A)

(a) M&L removing Old faded tapestry cloth from cushion of sofa Two seater and S & F new tapestry cloth of best quality not less than Rs. 750/- per metre as per approved sample for complete sofa Two Seater as per required size/shape complete all as specifed shown in drawing and as directed.

(b) Preparation of old decorated / new replaced parts /surface of sofa Two seater smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

Sofa Three Seater (Spl Design) (C3/MEC/SP/ 200/MO-19A)

(a) M&L removing Old faded tapestry cloth from cushion of sofa set three seater and S & F new tapestry cloth of best quality not less than Rs. 750/- per metre as per approved sample for complete sofa three seater as per required size/shape complete all as specifed shown in drawing and as directed.

(b) Preparation of old decorated / new replaced parts /surface of sofa Three seater smoothing by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

Bed with box type (C3/MEC/SP/175)

(a) M & L for removing unsv plywood top of bed and S & F new top made out of 12 mm thick plywood commercial BWP grade ISI marked of size 838x965mm all as directed and as shown on drawing.

(b) M & L for removing unsv plywood front and back of head board of bed and S & F new 6 mm thick plywood commercial BWP grade ISI marked (800 x 900mm) (02 Nos) duly fixed with 1.5mm thick decorative lamination teak veneer finished Front Side (340 x 900) & Back side (800 x 900) all as shown on drawing and as directed.

(c) M & L for removing unsv plywood front and back of foot board of bed and S & F new 6 mm thick plywood commercial BWP grade ISI marked (650 x 900mm) (02 Nos) duly fixed with 1.5mm thick decorative lamination teak veneer finished (650 x 900) all as shown on drawing and as directed.

(d) M & L for removing unsv side rail plywood of bed by S & F new side rail made out of 9 mm thick plywood commercial BWP grade ISI marked duly fixed with 1.5mm thick decorative lamination teak veneer finished including 1st class teak support free from knots and cracks shall be provided all as shown on drawing and as directed.

(e) M & L for removing unsv bottom plywood of bed by S & F new bottom made out of 9 mm thick plywood commercial BWP grade ISI marked all as shown on drawing.

(f) M & L for removing unsv stiffener by S & F new stiffener made out of II nd class Hard wood all as directed and as shown on drawing.

(g) M & L for removing unsv PVC hard shoes from bed by S & F new PVC rubber shoe of superior quality as per sample approved.

(h) Preparation of old decorated / new replaced parts /surface of bed box type smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

Bed with box type (MEC174)

(a) M & L for removing unsv plywood top of bed and S & F new top made out of 12 mm thick plywood commercial BWP grade ISI marked of size 838x965mm all as directed and as shown on drawing.

(b) M & L for removing unsv head board of bed by S & F new Head board made out of Block Board 30mm duly fixed with 1.5mm thick decorative lamination teak veneer finished(Both side) including 1st class teak wood beading free from knots and cracks shall be providedall all as shown on drawing and as directed.

(c) M & L for removing unsv foot board of bed by S & F new Foot Board made out of Block Board 30mm duly fixed with 1.5mm thick decorative lamination teak veneer finished(Both side) including 1st class teak wood beading free from knots and cracks shall be providedall all as shown on drawing and as directed.

(d) M & L for removing unsv side rail plywood of bed by S & F new side rail made out of 9 mm thick plywood commercial BWP grade ISI marked duly fixed with 1.5mm thick decorative lamination teak veneer finished ISI marked including 1st class teakwood support free from knots and cracks shall be provided all as shown on drawing and as directed.

(e) M & L for removing unsv bottom plywood of bed by S & F new bottom made out of 9 mm thick plywood commercial BWP grade ISI marked all as shown on drawing.

(f) M & L for removing unsv stiffener by S & F new stiffener made out of II nd class Hard wood all as directed and as shown on drawing.

(g) M & L for removing unsv PVC hard shoes from bed by S & F new PVC rubber shoe of superior quality as per sample approved.

(h) Preparation of old decorated / new replaced parts /surface of bed box type smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

Bed with ply board (MEC175)

(a) M & L for removing unsv plywood top of bed by S & F new top made out of 12 mm thick plywood commercial BWP grade ISI marked all as shown on drawing.

(b) M & L for removing unsv centre stiffener of bed by S & F new stiffenner dove tailed made out of 1 st class teak wood free from cracks and konts all as shown on drawing and as directed.

(c) M & L for removing unsv PVC hard shoes from bed by S & F new PVC rubber shoe of superior quality as per sample approved.

(d) Preparation of old decorated / new replaced parts /surface of bed with ply board smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

Bed with ply board (MEC185)

(a) M & L for removing unsv plywood top of bed by S & F new top made out of 12 mm thick plywood commercial BWP grade ISI marked all as shown on drawing.

(b) M & L for removing unsv head board of bed by S & F new Head board made out of Block Board 30mm duly fixed with 1.5mm thick decorative lamination teak veneer finished(Both side) including 1st class teak wood beading free from knots and cracks shall be providedall all as shown on drawing and as directed.

(c) M & L for removing unsv foot board of bed by S & F new Foot Board made out of Block Board 30mm duly fixed with 1.5mm thick decorative lamination teak veneer finished(Both side) including 1st class teak wood beading free from knots and cracks shall be providedall all as shown on drawing and as directed.

(d) M & L for removing unsv long rail of bed by S & F new long rail (overall size 40mm) made out of Block Board duly fixed with 1.5mm thick decorative lamination teak veneer finished including 1st class teak wood beading free from knots and cracks shall be providedall all as shown on drawing and as directed.

(e) M & L for removing unsv stiffener by S & F new stiffener made out of II nd class Hard wood all as directed and as shown on drawing.

(f) M & L for removing unsv PVC hard shoes from bed by S & F new PVC rubber shoe of superior quality as per sample approved.

(g) Preparation of old decorated / new replaced parts /surface of bed with ply top smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tightening the frame work all as specified shown in drawing and as directed.

Bed hard box type, Table computer, Table dinning, Table peg, Side board, Book case, Table 90 x 60 with drawer, Table dressing gents, Table dressing ladies, TV/VCR Cabinet, Stool dressing, Table writing, Teapoy, (C3/MEC/SP/175, C3/MEC/SP/199/SO/15, C3/MEC/SP/201/MO/25MEC/180, C3/MEC/SP/194/6/7, C3/MEC.SP/180/Mo/6, C3/MEC/SP/177/MO/21&28MEC/177, C3/MEC/SP/203/MO/26, C3/MEC/SP/203/MO/27MEC/181 C3/MEC/SP/205MEC/181)

(a) M&L for removing the unserviceable/broken laminated sheet 1 mm thick and S & F new laminated sheet 1 mm thick with approved adeshive complete all as specified and directed.

Dressing Stool (C3/MEC/SP/205)

(a) M & L for removing unsv cushioned seat of stool by S & F new 50mm thick cushioned of 32 density covered with tapestry cloth superior quality as per sample approved shall be provided all as shown on drawing and as specified.

Hat stand with mirror (FD 233 (M)

(a) M&L for removing old unsv mirror with frame by S & F new 5mm thick electro-copper plated mirror of including 1 st class well seasoned teak wood beading free from cracks and knots all as shown on drawing and as specified.

(b) M&L removing old unsv front teak plywood from frame by S & F new front plywood 4mm thick one side teak face commercial BWP grade ISI marked all as specified and as shown on drawing.

(c) M&L removing old unsv back ply from frame by S & F new back plywood 4mm thick commercial BWP grade BWP grade ISI marked all as specified and as shown on drawing.

(d) M&L removing old unsv brass pegs from frame by S & F brass pegs of superior quality of size 120 x 75 mm with brass screw as per sample approved all as specified and as directed.

(e) Preparation of old decorated / new replaced parts /surface of hat stand with mirror smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

TV VCR Cabinet (MEC 176)

(a) M & L for removing unsv castor wheel of cabinet by S & F new castor wheel of superior quality as per sample approved all as shown on drawing and as directed.

(b) M & L for removing unsv back ply of cabinet by S & F new back ply made out of 6 mm thick plywood commercial BWP grade ISI marked all as shown on drawing and as specified.

(c) Preparation of old decorated / new replaced parts /surface of TV VCR cabinet smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

Stool dressing (FD/E6/MAP/14)

(a) M & L for removing unsv cushioned from seat of stool by S & F new 50mm thick cushioned of 32 density covered with Tapestry cloth as per sample approved shall be provided all as shown on drawing and as specified.

(b) M & L for removing unsv plywood seat of stool including by S & F new 12 mm thick BWP grade commercial plywood ISI marked all as shown on drawing and as specified.

(c) M & L for removing unsv hard rubber shoe of stool by S & F new hard rubber shoe of superior quality as per sample approved all as directed.

(d) Preparation of old decorated / new replaced parts /surface of stool dressing smoothening by required grade of sand paper and applying one or more coats of french polish to achieve glossy finish including tighting the frame work all as specifed shown in drawing and as directed.

Yash enterprises

Lucky General Engineers and Contractors

SAIRAM INDUSTRIES

Rao Sales and service