REPAIR TO INTERLOCKING TILES, PATH, HARDSTANDING, PCC FLOORING IN CERTAIN AREA UNDER AGE BR-III OF GE (A) JAISALMER

Amount

M&L for 75 mm thick plain cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base of flooring/ hard standing path & finishing the surface even & fair without using extra cement complete all as specified & directed by Engineer-in-charge.

M&L for 100 mm thick plain cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in flooring/ hard standing & finishing the surface even & fair without using extra cement complete all as specified & directed by Engineer-in-charge.

M&L for 50 mm thick PCC (1:3:6) type C-1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight all as specified & directed by Engineer-in-Charge

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 25mm thick sand cushioning complete all as specified & directed by Engineer-in-charge. Note :- (i) Pattern of interlocking tile to be rubber moulded or equivalent as approved by GE. (ii) Rate quoted by the contractor shall deemed inclusive of PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) packing and finished even and fair to the sides of pavement.

S & F rubber moulded chequered cement concrete tiles 20cm X 20 cm X 25mm thk with grey cemnt and pigments,set jointed in neat cement slurry as in floors/path etc over and including 15mm thk screed bed in CM (1:4) complete all as specified & directed by Engineer-in-charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. loaded bedded and pointed in any mortar complete all as specified & directed by Engineer-in-charge.

M&L Granite (of any type) tile 18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing laid on complete all as specified & directed by Engineer-in-charge.

M&L for machine cut kota stone slab flooring 550mmx550mmx20 to 25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including screed bed or bedding layer of 15mm thick in CM (1:6) all as specified and directed by Engineer-in-charge.

M&L for machine cut kota stone slab 18 to 20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing complete over and including 10 mm thick backing coat in CM (1:3) complete all as directed by Engineer-in-charge.

M&L sand stone slabs 5cm thick in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4. complete all as specified & directed by Engineer-in-charge.

Demolition of cement concrete unreinforced in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance complete all as specified & directed by Engineer-in-charge.

M&L for 25mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in subbase of floors & finishing the surface even & fair without using extra cement complete all as specified & directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise complete all as specified and directed by Engineer-in-charge.

S&F glazed ceramic coloured tiles (Joint free) of size 450mmx300mmx7mm thick on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick backing coat in CM (1:4) complete all as specified and directed by Engineer-in-charge.

M&L for non skid ceramic coloured tiles of size 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified & directed by Engineer-in-charge.

M&L for ceramic tiles exterior grade 300 x 300 x 10mm (Endura tiles) set and jointed in neat cement slurry and pointed in coloured cement to match all as specified and roughening of exc concrete surfaces complete all as specified & directed by Engineer-in-charge.

M&L light shade, vitrified tiles, 10mm thick (minimum), (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm (including 600mmx600mm size), in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:6) complete all as specified & directed by Engineer-in-charge.

M&L vitrified tiles of light shade, 10mm thick (minimum) (square/ rectangular) polished area of each tiles equal to or not exceeding 0.36 sqm (including 600mmx600mm size), in skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles laid over and including 10mm thick backing coat in CM (1:4) complete all as specified and directed by Engineer-in-charge.

Demolition of Brickwork/stone/PCC block boulder masonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified & directed by Engineer-in-charge.

M&L for precast cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) as in block masonry with solid blocks exceeding 10cm width and setting in cement mortar (1:6) complete all as specified & directed by Engineer-in-charge.

M&L for rendering 15 mm thick plaster in cement mortar (1:6) on fair faces of brick work or concrete surfaces of walls and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified & directed by Engineer-in-charge.

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified & directed by Engineer-in-charge.

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) but except stone complete all as specified & directed by Engineer-in-charge. Note :- Serviceable stone obtained from demolition shall be used.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses complete all as specified & directed by Engineer-in-Charge.

M & L for Keyed pointing to rubble masonry uncoursed or brought up to courses in cement mortar 1:4 complete all as specified & directed by Engineer-in-Charge.

Taking down cement plaster on brick or stone wall,etc including raking out joints, haking for key, scrubbing down with water etc complete all as specified & directed by Engineer-in-Charge.

M&L for rendering 5 mm thick in CM (1:3) on fair faces of concrete surfaces as in ceiling finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for 15mm thick rendering in cement morter 1:4 on fair face of brick wall or concrete surfaces, finished even & fair including mixing of waterprofing compound as per manufactures instruction complete all as specified and directed by Engineer-in-charge. Note :- Supply only WPC shall be measured and paid seperately as supply only.

Supply only integral water proofing compound complete all as specified and directed by Engineer-in-charge.

M&L for preparing new plastered or unplastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new plastered surfaces of walls and applying two coats of distempering oil emulsion over a coat of primer complete all as specified & directed by Engineer-in-charge.

S & F in repair 300 mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed by Engineer-in-charge.

S&F in repair 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drwn steel spring, fixed in floor complete as directed by Engr-in-Charge.

S&F in repair aluminium (Die cast) door closer hydraulically regulated designation No. 3, universal type, suitable for door shutter of 851 mm to 1000mm in width and of weight between 61 to 80 Kg complete all as specified & directed by Engineer-in-charge.

S&F in repair aluminum power coated partition wall of aluminum section 100mm x 44mm x 2mm thick frame rectangular section and panel 12mm thick prelaminated board in bottom panel and 5.5mm thick sheet glass in top panel with rubber lining and aluminum beading around length including necessary fixing arrangement for bottom and top member of aluminum frame in floor/PCC/Brick work as per site requirement with rawl plug etc, including chromium plated steel screws 60cm centre to centre complete all as specified & directed by Engineer-in-charge. (Note :- Rate quoted by the Contactor shall deemed to inclusive of 12mm thick prelaminated board and 5.5mm thick sheet glass).

Supply fabricating and fixing in repair of aluminium door powder coated of extrusion aluminium section including frame work complete, consisting of frame vertical and horizontal members, of size 104mmx44.45mmx 1.8mm thick. Vertical style of door shutter of size 85mmx44.45mmx 1.8mm thick. Top, middle and bottom rial of size 85mmx44.45x1.8mm thick and partially 5 mm thick plain/tinted sheet glass of partially prelaminated particle board 9 to 10mm thick with aluminium bedding and rubber gasket/beading including frosted film as desired fixing of hydraulic floor spring one in single leaf or two nos in double leaf door. One mortice lock for aluminium door (each) and two aluminium tower bolts for each door. Fixed with rawl plug including rectification of floor/wall to match the existing surfaces all as specified and as directed by Engineer-in-Charge at site. Note :- Rate quoted shall deemed to inclusive of partially 5 mm thick sheet glass with sun control film and partially 12mm thick prelaminated particle board.

S&F of powder coated aluminum sliding window comprising of sliding runner of three way (track), consisting of two sliding shutter duly fitted with 5.0 mm thick galss and one shutter duly fitted with stainless steel wire cloth of 0.36 mm nominal dia of wire & average width of aperature 1.4 mm with and incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc and down push type locking arrangement in glass shutter, incl necessary fixing arrangement i.e. rawl plug etc, complete all as specified and directed by Engineer-in-charge.

Dismantling of Ceiling Board of any description and any thickness including Cover Fillets, Cornices, etc complete all as specified and directed by Engineer-in-charge.

S&F anodised aluminium snap grid frame work 605x605mm for false ceiling and hangers 6mm dia, GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fastener 12.5mm dia 40mm long including Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed by Engineer-in-charge. Note :- (i) Main tee, cross tee shall be 35x25x1.5mm & 25x25x1.5mm respectively. Angle at end all along the walls shall be 40x25x2mm. (ii) Rate quoted by the contractor shall deemed to inclusive of frame work & ceiling board complete.

M&L for preparation of newly plastered Surfaces of any description over 10cm girth or width, not otherwise described and applying two coat of plastic emulsion over a coat of primer and 1mm wall care putty all around to achieve smooth finish complete all as specified and directed by Engineer-in-charge.

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on and including 5mm thick PVC sheet fillets of width 35mm for wall paneling inclusive of fixing on wall to make frame and including taking down existing wall panelling including frames complete all as specified & directed by Engineer-in-charge.

M & L Providing PCC type C1 (1:3:6) using 20mm graded aggregate in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts baluster(100mmX100mm-required height), boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match complete all as specified and directed by Engineer-in-charge.

M&L for 35mm thick precast cement concrete louvers and jallies type C-0 (1:3:6) using 12.50mm graded aggregate (measured solid), including all mouldings but excluding frame, set in cement mortar 1:4 including dismantling Trellis work (Jafri) one way, including taking as under of battens in trellis (posts and rails measured separately) complete all as specified and directed by Engineer-in-charge.

JASOL MAA ENTERPRISES

S K TRADER

Bhawani Constructions

BHAGWATI CONSTRUCTION

AMBEY MAA CONSTRUCTION COMPANY

M/S OM VISHNU ENGINEERING & CONSTRUCTION COMPANY

Leelashah Enterprises

M/s Ramniwas Bishnoi