Repairing of Type-II Qtrs. (I and J) Blocks at Leimatak Colony.

Amount

Dismantling old plaster or skirting ranking out & cleaning the surface for re-plaster i/c disposal of rubbish within 50 metres.

6mm cement plaster to ceiling 1:3 (1 cement: 3 fine sand)

12 mm Cement plaster in 1:4 ( 1 cement: 4 fine sand)

Repairing to plaster i/c cutting & the patch in proper shape & preparing the surface of the wall complete: With cement mortar 1:4 (1 cement: 4 fine sand)

Removing white or colour wash by scrapping sand papering and preparing surface smooth i/c necessary repair to scratches etc. complete.

Granite stone slab flooring over 20mm (average) thick base of cement mortar 1:6 (1 cement :6 coarse sand) laid & jointed with grey cement slurry including rubbing and polishing complete with Granite slab 12.5mm slab thick

Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S 15622 of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) including grouting the joint with white cement & matching pigments etc. complete. Size of the Tile 300x300 mm (Single charge) Non-Branded

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1cement:4 coarse sand) including grouting the joints with white cement and matching pigments etc., compete. Size on Tile 600x600mm (Single charged) - non branded.

Neat cement punning

Providing & applying plaster of Paris putty of average thickness 1 mm, over the plastered wall surface to prepare the surface even and smooth complete.

Dismantling doors, windows & clerestory windows ventilators etc. (Wood or steel) shutters including choukhats, architraves, holdfasts & other attachment etc. complete & stacking them within 50m lead. i) Not exceeding 3 sqm in area.

Providing wood work for frames of doors, windows, clerestory windows & other frames, wrought framed & fixed in position, local best quality Leihao

P/F flush door shutters commercial type core of Black Board construction with frame of 1st class hard wood and well matched 1st class Indian teak ply veneering with vertical grains or cross bands and face veneers 3 mm thick on one face and commercial ply veneering with vertical grains or cross bands and face veneers 3 mm thick and other face of shutters i/c providing brass butt hinges with necessary screws as directed and specified: 25 mm thick , single leaf

Providing and fixing aluminium works for doors windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, Fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up gaps at junctions, at top, bottom and side with required EPDM rubber/Neoprene gasket etc. Aluminium snap beading for glazing/panelling, C.P brass /Stainless steel screws, all complete as per architectural drawing and the directions of Engineer-in- charge.(Glazing and panelling to be paid for separately): For shutters of doors, windows & ventilators including, providing and fixing hinges/pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately). (10.66.1) Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, windows, ventilator, shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawing and the directions of engineer-in- charge (cost of aluminium snap beading shall be paid in basic item) (10.68.1) With float glass panes of 4 mm thickness .

Providing & fixing Aluminium Tower bolts (barrel type) with screws etc complete.100x10mm

Providing & fixing Aluminium handle with necessary screws etc. complete. 100mm.

Providing & fixing Aluminium Sliding Bolts bright finished or black enamelled with nuts and screws etc complete. 250 x 16 mm.

Providing and fixing Stainless steel A ISI 304 (18/18) kitchen sink as per IS: 13983 with C.I brackets, 15mm CP brass pillar taps and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required: 610x460mm bowl depth 200mm

Painting on wall with (two or more coats) of delux Acrylic emulsion ( supreme 3 in 1) paint of equivalent of approve d quality in all shades on new works to give an even shade

Applying ready mixed priming coat pink primer of approved quality on wood work.

Painting two coats (excluding priming coat) with chocolate, red grey of buff paint of approved quality on new steel work or wood work.

Providing & fixing 600 X 20 mm CP brass towel rail complete with CP brass brackets fixed in wooden cleats with brass screws (hook type)

Flexible (coil shaped) PVC waste pipe for sink & wash basin with length not less than 700 mm including PVC waste fittings.

Providing & fixing mirror of superior glass (of approved quality) and of required shape and size plastic moulded frame of approved make & shade with 6 mm thick hard board backing : 24.34.2 Rectangular shape 453x357 mm

Providing & fixing 600 x120 x5 mm glass self (India make) with CP brass brackets guard nail complete fixed to wooden cleats with CP brass screws.

Providing & fixing white wash basin with CI brackets, 15mm CP brass pillar taps, 32mm CP brass waste of standard pattern, including painting fitting & brackets, cutting and making good the wall wherever required. White vitreous china flat back wash basin size 450 x300 mm with a single 15 mm CP brass pillar tap.

Providing and fixing C.P brass bib cock of approved quality confirming to IS 8931, 15 mm nominal bore

Providing CP towel ring

CP waste coupling 32mm dia.

Providing & fixing CP Brass stop cock (concealed)of standard design and of approved make confirming to IS; 8931 15mm nominal bore

Providing & fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water i/c all CPVC plain & brass thread fitting this includes jointing & pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge: External work 15 mm nominal outer dia. pipe

Painting one coat with chocolate, red, green, grey of buff paint of approved quality on old steel work or wood work.

Providing and fixing SIKA WP SHIELD 103P APP BITUMEN MEMBRANE consisting of a coat of SIKA WP SHIELD primer for bitumen membrane @ 0.20 per sqm by the same membrane manufacturer. Over the primer coat the layer of membrane shall be laid using Butane touch and sealing all joints etc. and preparing the surface complete.

Providing & fixing UPVC Soil, waste, rain water and vent pipes including all requisite fittings, jointing of pipes & fittings with solvent cement, trenching, refilling and testing of joints complete as per the direction of engineer-In-charge. 110 mm dia.

Providing & fixing UPVC soil waste, rain water and vent pipes including all requisite fittings, jointing of pipes & fittings with solvent cement, trenching, refilling and testing of joints complete as per the direction of engineer-In-charge. 75 mm dia.

Add EPF @ 3.25%

Add CESS @ 1%

Add GST @ 18%

M/S. L. PRIYOKUMAR SINGH