COMPREHENSIVE REPAIR B/R AND E/M WORKS IN MH AND OTHER LOCATION IN AREA OF AGE B/R-I UNDER GE SAUGOR

Amount

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sq m each complete all as specified and directed.

Taking down chowkhats or frame (with out taking off shutters from the frames) exc 1.50 Sqm but n exc 4 Sqm each with shutters complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc. 2 Sqm each complete all as specified and directed

M&L for second class hardwood plain, solid, straight chowkhat and frames wrought framed rebated on the solid, rounded on the solid or chamfered put together with glue pinned at joints complete all as specified and directed

S&F 35mm thick factory made flush shutters , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick factory made second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (w/o sash bars) edges of farrming plain chamfered or rounded fitted with cut and mitred beads for securing glass etc ,size of member of shutter as specified in SSR Part -I ,section 8,clause 8.20 (a) complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nomiral dia and wire and average width of aperture 1.40 mm fixed with stainless steel wire staples complete all as specified and directed

S & F in repair 3 mm thick sheet glass ordinary quality frosted on side fixed wdn beads / oil putty in square n. ex 0.50 sqm in each pane including hacking out old broken glasses (any thickness size qualityor description) from wdn frames or fixed with beads complete all as specified and directed

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tack or stainless steel wire staple complete all as specified and directed.

S&F factory made PVC door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm Prelam PVC sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member) complete all as specified and directed

S&F factory made soild PVC moulded door shutter, 28mm to 30 mm thick (stiles) with wood free EPS with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm thick plain colour sheet on back including 3 Nos 100 mm stainless steel butt hinges complete all as specified and directed.

S& F glazed aluminum door powder coated of any colour consisting of frame of 63mm x 38 mm size with shutter fixed on frame both side openable on pivotal arrangement with including necessary cutting holes in wall & floor Door shutter consists of top rail size is 84.45x44.45 mm , bottom rail & lock rail size is 101.80 x 44.45 mm & style of door shutter is 83 mmx 44.45 mm glazed with 5mm thick tinted /colour glassof approved make with handles 2 Nos in each door , hinges has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle , locking arrangemen,floor spring and floor door stopper incl. necessary joining cleats , glazing clips etc confirming to IS complete all as specified and directed.

S&F aluminium windows and ventilators sliding type three track powder coated consisting of frame 91.80 mm x 45 mm shutters 39 mm x 18 mm with rollers and locking arrangements with 4 mm thick plain glass with rubber gasket and aluminium beading , Al. handle,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as specified and directed .

S&F powder coated aluminium ventilators partially fixed and partially openable either top hung or side hung and bottom portion fixed having 4mm thick frosted glass and top portion having two shutters external shutter with 3 mm thick frosted glass and interal shutter having stainless steel wiremesh 0.36mm dia for Bath / WC including rubber gasket and alumium beading with necessary cleats / locking arrangement complete all as per standard engineering practice including necessary cutting holes on wall and floor complete all as specified and directed (Note:-Aluminium section weighing not less than 0.55kg/m }

M&L for vitrifed ceramic tile, light shade 10 mm thick (square/rectangular) polished area of each tile n exc.0.36 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM (1:6) including dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed

All as per Srl item No.15 above but in dado / skirting laid over & including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exc 0.18 Sqm but not exc 0.38 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screeed bed layer in CM (1:6) including dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed

All as per Srl item No.17 above but in dado / skirting laid over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

S&F coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.06 sqm and n. exc. 0.11 sqm as in floor set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match over 15 mm thick screed bed in CM 1:6 complete etc. including dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed

M&L nonskid coloured ceramic tiles 7 to 8 mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match coiour/shade including 15mm thick screed bed layer in CM 1:6 including dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed

M&L for glazed ceramic joint free coloured tiles on vetical surfaces size 450x300x7mm thick, over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade /colour of tiles including dismantling of floor tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed

M&L for glazed ceramic joint free coloured tiles on vetical surfaces size 600x300x7mm thick, over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade /colour of tiles including dismantling of floor tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed.

M&L for 25 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in levelling course of sub base finished even and rough to receive the topping layer complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors & pavings not exc 15 cm thickness below or above ground level including removal of deberies complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation/ filling and mass concrete and sub base of floors complete all as specified and directed.

M&L for suspended false ceilling comprising of 4mm thick non asbestos fibre cement bulding boards of size 595mmx595mm, fixed or laid/inserted to powder coated GI frame work with screws over GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sourrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fastners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm center to centre including hangers 4mmm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long including dismantling of any type or ceiling boards of any thickness incl cover fillets complete all as specified and directed.

M&L for 18 mm to 20 mm thick Granite slab of any shade ( table rubbed and polished ) machine cut for vertical surface of pillars, floor /shelves in steps, jambs, pillars, window cills& cooking plateforms over and including 20 mm thick screed bed or bedding layer of CM (1:4) including pointing in white/colour cement 1:2 using marble dust with admixture of pigment to match shade of the slabs laid bedded and pointed in any mortor including dismantling old existing tiles of any type complete all as specified and directed

S&F MS butt hinges 100 mm size medium weight, coled rolled and fixed with screws complete all as specified and directed

S&F 200mm size Aluminium anodised barrel tower bolt of extruded section and fixed with screws complete all as specified and directed

S&F extruded aluminium alloy handles, fabricated type., anodised Size of handle 150 mm fixed with steel screws complete all as specified and directed

S&F 250mm long Aluminium alloy anodised Sliding door both with hasp, staple( bolt type) and fixed clips of sheet , cast or extruded sections and fixing bolts and sliding of extruded sections or cast -aluminium alloy and fixed with steel screws complete all as specified and directed

S&F mild steel 150 mm, ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 including demolition of brick masonry, built in cement mortar with all quoins, arches, pillars, etc and removing of rubbish off the premises complete all as specified and directed.

M & L stone walling of random rubble, uncoursed well bonded, bedded and solidly hearted built in Cement -mortor 1 : 6, including demolition of brick masonry, built in cement mortar with all quoins, arches, pillars, etc and removing of rubbish off the premises complete all as specified and directed. complete all as specified and directed.

M & L for rendering 20 mm thick cement plaster in cement mortar 1:6 on stone masonary fair faces / other than fair faces finished surfaces of brick wall finishing the surfaces even and smooth without using extra cement etc.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4), finished the surface fair and even complete all as specified & directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc and removed of rubbish off the premises complete all as specified & directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6), finished the surface fair and even complete all as specified and directed

M&L for prepration of newly plastered wall sufaces & applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer complete all as specified and directed.

M & L for prepration of new wall surfaces & applying birla / J. K. wall care white putty 2 mm thick for levelling the surfaces including properly making of v shape crakes and filling of all crakes with crakes seal of walls and applying two coat of interior emulsion distemper over a coat of wall primer incl. preparation of surfaces of walls etc complete all as specified and directed.

M&L for complete removal of existing treatment from walls and applying 2mm thick Birla/J K wall care white putty on walls and applying two coat of interior Acrylic emulsion over a coat of wall primer complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6, C1 (20mm graded aggregate) as in plinth Protection finishing cement concrete surface even & smooth without using extra cement complete incl forming construction joint 10mm x 20mm filled with bitumen and coarse sand mortar complete all as specified and directed

S&F Rotational moulded polyethylene water storage tanks capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and incl dismantling of old unserviceable Water tank and removing from site complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and incl dismantling of old unserviceable Water tank and removing from site complete all as specified and directed.

S&F 20mm Ball valves, high pressure of PTMT with high density plastic bass screwed for iron pipe and fixed (min wt 20mm - 210 gms) complete all as specified and directed

S&F as in repairs 20mm dia bore Gun metal, Globe or gate valves, with iron head or lever screwed both ends for iron pipe complete all as specified and directed.

S&F in replacement 15mm bore Galvanised mild steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors including taking down GI tubing and connection complete all as specified and directed

S&F in replacement 20mm bore Galvanised mild steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floor including taking king down GI tubing and connection i complete all as specified and directed

S&F in repair PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend etc complete all as specified and directed.

S&F in repair vitreous China squatting pan “ORISSA” pattern size 580mm X 440mm, white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) & including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified & as directed.

S&F in repais vitreous China wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) incl White Seat cover complete all as specified and directed

S&F in repairs vitreous China wall mounted /floor mounted Water closet complete all as specified and directed.

S&F in repair vitreous China WHB white flat back size 550x400mm including Supplied and fixed angle iron brackets, C.P pillar tap fency type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers, Coupling and down take waste piple ; including bedding in CM on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair tubular towel rail, brass chromium plated 20mm dia, D type, 60cm long between flanges complete all as specified & directed.

S&F in 25 mm bore stainless steel conduit curtain rods, suitable for door/widows curtain with fancy type powder coated SS dooms with brackets fitted to each end and fixed to wall and making good etc complete.

S&F in repair bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

S&F in repair angle valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle,, chromium plated, with long shank and cup screwed both ends for iron pipe or for unions 15 mm bore complete all as specified & directed.

S&F in repairs brass chromium plated wall mixer for mixing Hot & Cold water with arrangement of head shower,high pressure, screwed down for 15mm bore iron pipe complete all as specified & directed.

S&F in repairs brass chromium plated WHB mixer for mixing Hot & Cold water high pressure, screwed down for 15mm bore iron pipe complete all as specified & directed.

S&F in repair Hand shower (Health faucet) Cast copper alloy chromium plated with 8mm dia , one metre long flexible tube & wall hook complete screwed for iron pipe bore dia 15mm complete all as specified and directed.

S&F as in repair Multi bib tap 2 in 1 , cast copper alloy chromium plated fency type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm boreand fixed complete all as specified and directed.

S&F PVC connections 15mm bore size450 in length with both end brass high quality nuts complete all as specified & directed.

S&F in repairs brass chromium plated shower rose fancy type , as approved , with or without swivel joints, including fixing to steel pipe fixed complete all as specified and directed.

S&F in repairs 75 mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall complete all as specified & directed.

S&F PVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified & directed.

S&F in repair 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified & directed.

S&F in repair 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed and fixed to walls complete all as specified & directed..

S&F PVC (SWR) bends 110 mm dia complete all as specified & directed.

S&F PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal with acess door complete all as specified & directed. .

Supplied and fixed PVC (SWR) bends 75 mm dia all as specified and directed

M&L 75 mm diameter PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified ans directed.

S&F in repair concealed stop valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F 18/19 mm thick pre laminated paticle board, as in cupboards, shelves, pelmets etc sexterior grade, pre laminated one side decoraded choice lamination and other side balancing white lamination cut to required size and fixed to frame and corner finish with wooden beads and including polishing of wooden beads complete all as specified & directed.

S&F 18/19 mm thick Block board grade 2 interior grade ,commercial type , fixed with screw to timber frame work including 0.9 mm decorative laminate type1 of surface finish,colour and pattern as approved and fixed with approved adhesive as per manufacturers instruction complete all as specified & directed.

S & F in repair Continuous (piano) hinges, Width of flaps (when open)- 30mm mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F 100mm long Hasp and Staple, safety type Aluminium with MS hinge pin incl bolt to hinge plate and fixed with screws complete all as specified & directed.

S&F in repairs ball catches magnet type , with striking plate including complete all as specified.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer of surfaces over 10cm width or girth, all as specified.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) Ridge in roof coverings complete all as specified and directed

Dismantling unframed timber scantlings 40 sq. cm & over in section, in any position complete all as specified and directed

Dismantling timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section framed/unframed complete all as specified and directed.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated shets in roofs Fixed with L-type or J-type or cranked hook bolts complete all as specified and directed

All as per item No. 86.00 above but except sheets complete all as specified and directed.

S&F 6mm thick asbestos cement serrated ridge or hip ridge for corugated or semi corugated sheets, fixed with L-type or J-type or cranked hook bolts with GI & bitumenous washer complete all as specified and directed.

S&F pre- coated coloured galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa (AZ150) as in roof covering/ clading to wall, including crimping sheet at end fixed with self tapping screws.ncluding dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets roofing complete all as specified and directed.

S&F 0.5 mm thick galvalume sheet pre-coated coloured for ridge or fixing for closing gable truss suitable for profile pattern sheet fixed with self driving screws complete all as specified & directed.including dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets as ridge complete all as specified and directed.

S&F of structural steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S&F structural steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, etc., complete all as specified and directed.

S&F MS plates (plain or chequered) channels square cut to or notched forming holes with riveted bolted or welded attachment for Fe-410W complete all as specified and directed.

M&L Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer of surfaces over 10cm width or girth, all as specified.

S&F in repairs door closer hydraulically regulated, aluminium body, designation No. 3, universal type, suitable for door shutters of weight between 61 to 80 Kg complete all as specified and directed.

Repairing of aluminium door of size exc 1.5 Sqm but not exc 4.0 Sqm and make serviceable by replacing of un serviceable Butt hinges , Tower bolts, Handles ,double action floor spring, locking arrangement, aluminium beading etc complete all as directed and up to the satisfaction of Engr-in-Charge. Note: double action floor spring shall be measured and paid in respective items.

S&F Aluminium powder coated fixed glazing of section of size 100mm x 44mm x 1.5 mm thick including necessary clips, standard aluminium bead and rubber packing, to receive 12mm thick prelaminated particle board or 5mm thick tinted glass or 3 to 4 mm Aluminium composite sheet panel complete all as specified and directed

S&F Machine pressed precast cement concrete coloured chemically treated rubber moulded interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658 - 2006 of 60mm thick, M-35 grade, laid on stone dust cusion of 25 mm thick complete all as specied and directed.

M & L for Providing cement concrete 1:2:4 type B 1 ( using 20 mm graded stone aggt ) as in coping , apex stone , bed plate , kerbs including weathering , slightly rounded or chamferred angles and throating incl. necessary form work etc and making the surface even and smooth without using extra cement complete all as specified and directed.

Taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc.

M&L for point wiring with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green .

For one light point or fan point controlled by one switch complete all as specified and directed.

For one Call Bell point controlled by one push button switch complete all as specified and directed.

For 5 Amp independent socket point controlled by one switch complete all as specified and directed.

For one 3 pin ,5 Amp socket point with other switch on the same board complete all as specified and directed.

All as per item No 101.00 here in before but for power point wiring using with 2.5 sqmm PVC FRLSH insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable complete all as specified and directed.

M&L for concealed point wiring with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl conduit of size not less than 20mm ISI marked, including modular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows, etc. all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green incl cutting and chasing in stone/brick masonry complete all as specified and directed.

For one light point or fan point controlled by one switch complete all as specified and directed.

For one Call Bell point controlled by one push button switch complete all as specified and directed.

For 5Amp independent socket point controlled by one switch complete all as specified and directed.

For one 3 pin ,5 Amp socket point with other switch on the same board complete all as specified and directed.

All as per item No 102.00 here in before but for power point wiring using with 2.5 sqmm PVC FRLSH insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable complete all as specified and directed.

S&F Modular switch, one way,6 Amp 230, 1 module complete all as specified and directed.

S&F modular socket 6 Amp-2/3 pin combined 2 module complete all as specified and directed.

S&F Modular switch, one way,6 A/16 Amp 230, 1 module complete all as specified and directed.

S&F modular socket 6 A/16-2/3 pin combined 2 module complete all as specified and directed.

S&F Modular fan step regulator 120 Watt -2 module complete all as specified and directed.

S&F Modular bell push 6A one module complete all as specified and directed.

S&F switch piano type flush, single pole, one way 5 A 230 V complete all as specified and directed.

S&F socket outlet, 5 pin, 5 Amp, flush type, 230 V complete all as specified and directed.

S&F switch piano type flush, single pole, one way 15 A 230 V complete all as specified and directed.

S&F socket outlet 2 in 1,6 pin, 5/15 A, flush piano type 240 V complete all as specified and directed.

S&F ceiling rose, surface backlite,three terminal complete all as specified and directed.

S&F lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed.

S & F in repair/replacement bell ding dong 230 V, single phase complete all as specified and directed.

S&F electronic double space rotary 5 speed type regulator 120-280 V complete all as specified and directed.

S&F bell push flush type one way 5Amp 240 Volt complete all as specified and directed.

M&L sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 4 sqmm (for main current) drawn in & incl PVC Casing-n-caping /pvc conduit of suitable size not less than 20mm of suitable size ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed.

M&L surface conduit sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC casing -n-caping/pvc conduit of suitable size not less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed.

S&F testing and commissioning of MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs including taking down complete all as specified and directed.

S&F testing and commissioning of MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs including taking down complete all as specified and directed.

S&F sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar including taking down complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces will be including in item rate .

S&F double door metallic sheet metal enclosure for DB double door(IP-42/43) When MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar including taking down complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces will be including in item rate .

S&F LED Bulk head 13/10 watt designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed.

Supply only TL fitting 20 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed.

Supply only box type LED optic fitting 10/9 Watt 2 feet box type complete all as specified and directed.

S&F Modular AC box enclosure with socket plug top and MCB SP 25 Amps flush mounting enclosure complete all as specified and directed.

S&F PVC conduit of size 20mm dia including fixing on wall/ceiling with suitable clamp/saddles for wiring wire all as required at site.

S&F PVC casing caping of size 1" x 1/2" including fixing on wall/ceiling with clamp/saddles for wiring wire all as required at site

maharaja construction and suppliers (BID ID -3374782)

Mohan singh (BID ID -3375929)

dipangashu barick and associates (BID ID -3374514)

d k suppliar (BID ID -3376245)

M K Construction (BID ID -3373548)

M/S Sai supplier (BID ID -3375531)

shubhanshu traders (BID ID -3375749)

siddhant construction (BID ID -3373586)

M/s arjeet singh ahluwalia (BID ID -3375799)

pal enterprises (BID ID -3375651)