Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.5 LAccepted-AOC | ₹44.5 L | L1 | Accepted-AOC L1 |
| 2 | L2₹46.3 L+₹1.8 L (4.02%)Rejected-Finance 01 ENTERPRISES | ₹46.3 L+₹1.8 L (4.02%) | L2 | Rejected-Finance Other than L1 |
| 3 | L3₹48.5 L+₹3.9 L (8.78%)Rejected-Finance H NO 18 SHEET NO 5 A KATIA COLONY NAMDEV MARG BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | ₹48.5 L+₹3.9 L (8.78%) | L3 | Rejected-Finance Other than L1 |
| 4 | L4₹50.5 L+₹5.9 L (13.3%)Rejected-Finance KOHLI NO 17509 GALI KHADDAR BHANDAR WALI BHI WALA ROAD BATHINDA PB 151001 | BATHINDA | BATHINDA | PUNJAB | 151001 | ₹50.5 L+₹5.9 L (13.3%) | L4 | Rejected-Finance Other than L1 |
| 5 | L5₹50.9 L+₹6.4 L (14.3%)Rejected-Finance 306 SHIV BARI MARG PANCHVATI NAGAR BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | ₹50.9 L+₹6.4 L (14.3%) | L5 | Rejected-Finance Other than L1 |
| Sl No | Description | Qty | Unit | M/s Luxmi Constructions L5 | ADP Engineering L7 | M/s BALDEV SINGH L9 | M/s BHUPINDRA ENGINEERING WORKS L4 | Singla Enterprises L2 | V K CONTRACTOR L3 | GUPTA AND ENGINEERS L6 | GARG INFRA PROJECTS L1 | REYANSH GARG AND COMPANY L10 | ANANT ENTERPRISES L8 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Rough excavation not exceeding 1.50 metres deep in soft/loose soil from embankments of firing range butts, traverse walls and similar earthwork formations, including getting out, dressing of sides and bottom, and stacking the excavated material at site as directed within a lead not exceeding 50 metres. The stacked material shall be screened on the site of work for separation and recovery of metal, chippings, brass, cartridge cases, lids and other recoverable materials, complete as directed. The screened materials and residual sand/soil obtained on either side of the screen shall be stacked separately in distinct heaps for the purpose of measurement. After measurement, all recoverable materials such as metal, brass, cartridge cases, lids and similar items shall be handed over to the user/unit as directed by the Engineer-in-Charge. The balance unserviceable material, including residual sand mixed with burnt saw dust and other waste matter, shall be removed from the site and deposited in low-lying areas as directed, with a lead exceeding 1.50 Km but not exceeding 3.00 Km, complete all as specified and as directed by Engineer-in-Charge. | 780 | Cum | 144 ₹1,12,320 | 505 ₹3,93,900 | 100 ₹78,000 Lowest | 200 ₹1,56,000 | 250 ₹1,95,000 | 600 ₹4,68,000 | 1,000 ₹7,80,000 | 250 ₹1,95,000 | 1,500 ₹11,70,000 | 220 ₹1,71,600 |
| 2.00 | Supply only Fine Sand (river sand) and stacked near firing range butts, traverse walls for measurement complete all as specified and as directed by Engineer-in-Charge. | 390 | Cum | 2,250 ₹8,77,500 | 2,010 ₹7,83,900 | 1,000 ₹3,90,000 | 1,700 ₹6,63,000 | 2,000 ₹7,80,000 | 600 ₹2,34,000 Lowest | 1,200 ₹4,68,000 | 1,600 ₹6,24,000 | 600 ₹2,34,000 Lowest | 2,600 ₹10,14,000 |
| 3.00 | Supply only saw dust and stacked near firing range butts, traverse walls for measurement complete all as specified and as directed by Engineer-in-Charge. | 390 | Cum | 3,960 ₹15,44,400 | 3,010 ₹11,73,900 | 1,000 ₹3,90,000 | 2,500 ₹9,75,000 | 2,000 ₹7,80,000 | 600 ₹2,34,000 | 1,100 ₹4,29,000 | 2,200 ₹8,58,000 | 500 ₹1,95,000 Lowest | 4,000 ₹15,60,000 |
| 4.00 | Labour only for mixing approved river sand and saw dust in the ratio of 50:50 by volume, spreading, depositing, filling, levelling and compacting the mixed material in firing range stop butts in layers not exceeding 25 cm in thickness, including watering as necessary, forming the required profile, height and side slopes, dressing the finished surface, and carrying out all operations necessary for proper consolidation and completion of the work, complete all as specified and directed by the Engineer-in-Charge. | 780 | Cum | 180 ₹1,40,400 | 210 ₹1,63,800 | 900 ₹7,02,000 | 100 ₹78,000 Lowest | 210 ₹1,63,800 | 1,000 ₹7,80,000 | 500 ₹3,90,000 | 200 ₹1,56,000 | 600 ₹4,68,000 | 500 ₹3,90,000 |
| 5.00 | Material and labour for removing existing sand-filled bags from firing range stop butts, screening and recovering the serviceable river sand therefrom, and providing new brown hessian gunny bags of minimum size 66 cm × 36 cm, internally laminated with polyethylene. The item shall include filling the recovered river sand into the new bags, stitching the bags securely, and placing/stacking the filled bags in position at the top, bottom and sides of firing range stop butts to the required profile, alignment and dimensions, complete all as specified and directed by the Engineer-in-Charge.
Notes: (i) The rate shall be deemed to include supply of new hessian gunny bags, opening and removing existing bags, screening and recovering serviceable river sand, filling, stitching, handling, loading, unloading, transportation within the site, stacking and proper arrangement of sand-filled bags to the required profile and dimensions. The rate shall also include collection and disposal of unserviceable gunny bags and other waste material arising from the operation, complete as directed by the Engineer-in-Charge.
(ii) Measurement for payment shall be made on the basis of the number of new bags filled with recovered river sand, stitched and placed in position as specified and directed. | 3,000 | Each Bag | 126 ₹3,78,000 | 210 ₹6,30,000 | 500 ₹15,00,000 | 280 ₹8,40,000 | 240 ₹7,20,000 | 200 ₹6,00,000 | 300 ₹9,00,000 | 240 ₹7,20,000 | 50 ₹1,50,000 Lowest | 250 ₹7,50,000 |
| 6.00 | Material and labour for removing existing sand-filled bags from firing range stop butts and providing approved fine river sand and new brown hessian gunny bags of minimum size 66 cm × 36 cm, internally laminated with polyethylene, including filling the bags with approved river sand, stitching the bags securely and placing/stacking the filled bags in position at the top, bottom and sides of firing range stop butts to the required profile, alignment and dimensions, complete all as specified and directed by the Engineer-in-Charge.
Notes:
(i) The quoted rate shall be deemed to include supply of all materials including river sand and gunny bags, filling, stitching, handling, loading, unloading, transportation, stacking, placing in position and proper arrangement of sand-filled bags to the required profile and dimensions. The rate shall also include removal of existing unserviceable sand-filled bags from the firing range stop butt, segregation of reusable sand, loading, transportation and disposal of unserviceable bags and surplus sand remaining after reuse under BOQ Serial Item No. 5, in low-lying areas as directed by the Engineer-in-Charge with a lead exceeding 1.00 Km but not exceeding 1.50 Km.
(ii) Measurement for payment shall be made on the basis of the number of new sand-filled bags supplied, filled, stitched and placed in position, complete as specified and directed by the Engineer-in-Charge. | 3,000 | Each Bag | 144 ₹4,32,000 | 210 ₹6,30,000 | 710 ₹21,30,000 | 350 ₹10,50,000 | 295 ₹8,85,000 | 200 ₹6,00,000 | 300 ₹9,00,000 | 280 ₹8,40,000 | 60 ₹1,80,000 Lowest | 300 ₹9,00,000 |
| 7.00 | Supplying approved good earth, free from stones, vegetation, roots, rubbish and other deleterious matter, obtained from sources outside Air Force land, irrespective of all leads and lifts, and delivering/stacking the same at designated locations of blast pens, igloos, traverse walls or at any other location within the Technical Area as directed for the purpose of measurement. After measurement, the earth shall be spread, deposited and filled over blast pens, igloos and traverse walls up to a height of 9.00 metres, in layers not exceeding 300 mm in consolidated thickness, including breaking clods, levelling, watering, ramming/compacting each layer and dressing to the required lines, levels, slopes, profile and dimensions, complete all as specified and directed by the Engineer-in-Charge.
Notes: (i) Measurement for payment shall be based on the consolidated quantity of earthwork only. The quantity of earth supplied shall be measured either from stacked dimensions prior to spreading or by finished dimensions after compaction, as determined by the Engineer-in-Charge. In case measurement is taken from stacked earth, a standard deduction of 15% shall be made towards shrinkage, voids and compaction to arrive at the payable quantity.
(ii) The quoted rate shall be deemed to include the cost of procurement, royalty, loading, unloading, transportation, all leads and lifts, stacking, handling, measurement, spreading, depositing, filling, levelling, watering, ramming, compaction, dressing and all incidental operations necessary for completion of the work. No extra payment whatsoever shall be admissible on any of these accounts under any circumstances. | 3,215 | Cum | 499.5 ₹16,05,892.5 | 505 ₹16,23,575 | 100 ₹3,21,500 Lowest | 400 ₹12,86,000 | 345 ₹11,09,175 | 600 ₹19,29,000 | 450 ₹14,46,750 | 330 ₹10,60,950 | 1,000 ₹32,15,000 | 200 ₹6,43,000 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
13 Jul 2026, 6:00 pmClosed
GE (AF) BHISIANA
GE (AF) BHISIANA PIN - 151201
REPAIR AND MAINT OF BLAST PEN TRAVERSE WALLS AND SA FIRING RANGE INCLUDING EARTH WORK AT BHISIANA UNDER GE (AF) BHISIANA
2026_MES_773784_1
GE/BHI/TOKEN-06/2026-27
Open Tender
Civil Works
Item Rate
335 days
GE (AF) BHISIANA
As per NIT
7 documents required · 7 mandatory
₹500
GE (AF) BHISIANA
₹90,000
Yes
GE (AF) BHISIANA
11 Aug 2026
20 Jun 2026
15 Jul 2026
20 Jun 2026
13 Jul 2026
6 Jul 2026
20 Jun 2026 - 3 Jul 2026
26 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Rough excavation not exceeding 1.50 metres deep in soft/loose soil from embankments of firing range butts, traverse walls and similar earthwork formations, including getting out, dressing of sides and bottom, and stacking the excavated material at site as directed within a lead not exceeding 50 metres. The stacked material shall be screened on the site of work for separation and recovery of metal, chippings, brass, cartridge cases, lids and other recoverable materials, complete as directed. The screened materials and residual sand/soil obtained on either side of the screen shall be stacked separately in distinct heaps for the purpose of measurement. After measurement, all recoverable materials such as metal, brass, cartridge cases, lids and similar items shall be handed over to the user/unit as directed by the Engineer-in-Charge. The balance unserviceable material, including residual sand mixed with burnt saw dust and other waste matter, shall be removed from the site and deposited in low-lying areas as directed, with a lead exceeding 1.50 Km but not exceeding 3.00 Km, complete all as specified and as directed by Engineer-in-Charge. | 780 | Cum | - | - |
| 2 | Supply only Fine Sand (river sand) and stacked near firing range butts, traverse walls for measurement complete all as specified and as directed by Engineer-in-Charge. | 390 | Cum | - | - |
| 3 | Supply only saw dust and stacked near firing range butts, traverse walls for measurement complete all as specified and as directed by Engineer-in-Charge. | 390 | Cum | - | - |
| 4 | Labour only for mixing approved river sand and saw dust in the ratio of 50:50 by volume, spreading, depositing, filling, levelling and compacting the mixed material in firing range stop butts in layers not exceeding 25 cm in thickness, including watering as necessary, forming the required profile, height and side slopes, dressing the finished surface, and carrying out all operations necessary for proper consolidation and completion of the work, complete all as specified and directed by the Engineer-in-Charge. | 780 | Cum | - | - |
| 5 | Material and labour for removing existing sand-filled bags from firing range stop butts, screening and recovering the serviceable river sand therefrom, and providing new brown hessian gunny bags of minimum size 66 cm × 36 cm, internally laminated with polyethylene. The item shall include filling the recovered river sand into the new bags, stitching the bags securely, and placing/stacking the filled bags in position at the top, bottom and sides of firing range stop butts to the required profile, alignment and dimensions, complete all as specified and directed by the Engineer-in-Charge.
Notes: (i) The rate shall be deemed to include supply of new hessian gunny bags, opening and removing existing bags, screening and recovering serviceable river sand, filling, stitching, handling, loading, unloading, transportation within the site, stacking and proper arrangement of sand-filled bags to the required profile and dimensions. The rate shall also include collection and disposal of unserviceable gunny bags and other waste material arising from the operation, complete as directed by the Engineer-in-Charge.
(ii) Measurement for payment shall be made on the basis of the number of new bags filled with recovered river sand, stitched and placed in position as specified and directed. | 3,000 | Each Bag | - | - |
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.08 MB
BOQ_866423.xls
BOQ • 0.24 MB
TenderDocToken06of2627.pdf
Tender Documents • 0.50 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .