Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹31.5 L
EMD Value
₹31,460
Closing Date
9 Aug 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Block Development Officer VP
Gudimangalam Union Office,Pethapampatti
Pannaikinar Panchayat Works (1Nos) PKG 08
2023_RDTN_352833_8
3074/2022/A1
Open Tender
Civil Works
Item Rate
60 days
Pannaikinar
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹31,460
Yes
Gudimangalam Union Office
10 Aug 2023
1 Aug 2023
9 Aug 2023
1 Aug 2023
9 Aug 2023
1 Aug 2023
2 Aug 2023
Amount
1) Construction of New Panchayat office building at Kolikuttai H/O Pannaikiner
Earth work excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and balling out water whenever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick
Supplying and filling in foundation and basement with filling conveyed gravel in larges of not more than 15 cm thick well rammed watered and compacted including & conveyance and all labour charges etc.,
Supplying and filling in basement with filling River sand in layer of not more than 15 cm thick well rammed etc., complete.
Cement concrete 1:4:8 mix using 40mm gauge hand broken granite tone jelly for foundation including dewatering if found ecessary and laid in layers of not more than 15 cm thick and compacted,etc., complete complying standard specification.
Brick work in cm 1:5 mix (one cement and five sand) using II class bricks of size 23 x 11 x 7 cm including curing, finishing and cost & Conveyance of all materials etc., complete. 1. Basement
2. Superstructure
Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2. 1.Below Ground level
2. For Column Post
3. Rate for roof slab, lintel, beam
4. Rate for sunshade
Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete
Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications., 1.For foundation and basement
2.For superstructure in ground floor
Plastering with cm 1:5 mix( one cement and five sand ) to 12 mm thick including cost and conveyance of all materials in all floors etc.,as directed by departmental officers etc, complete complying with standard specifications.
Providing Granolythic floor finish in cement concrete 1:2:4 mix using 10-12 mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges etc.,
Plastering surfaces of RCC items such as slabs,beams,sunshades with cement mortar 1:3 -10mm thick including packing, providing cement mortar beading for sunshades staircase ,steps, lands slabs etc.,as directed by departmental officers etc,
Plastering 1:4 mix (onecement and five sand) 20mm thick including cost of labour charges etc., completeas directed by departmental officers etc, complete complying with standard specifications..
Supplying and fixing in position best EUROPEAN WATER CLOSET of approved quality With P or S trap with double flapped seat and seat cover with brass hinges and 10 litre capacity PVC low level flushing tank with all internal fittings
Supplying and fixing in position best white glazed earthenware Oriya type INDIAN WATER CLOSET of approved quality of size 584mm with 'P' or 'S' trap and embedding the closet with trap to shape in position with 40mm brick jelly concrete 1:2:5 (One lime, two sand and five brick jelly) and finishing the top to the required slope and including giving connection to the C.I. soil stacks by dismantling the masonry floor or RCC works and redoing the same to the original condition without any leakage etc., complete as directed by the departmental officers
Supplying and fixing in position best hand wash basin of size 550mm X 400mm with all accessories such as cast iron brackets ,32mm dia CP waste coupling , rubber plug and chain 32mm dia B class GI waste pipe 15mm dia GM wheel valve ,15mm Nylon connection 15mm dia brass nipples ,15mm C.P pillar tap etc.,
Supplying and fixing P.V.C. ventilating shaft of 110mm dia and 3m height of best approved quality and as per standard specifications.
a)110mm dia pvc vent cowl
Casting and Fixing RCC Pre Cast slab-50 mm tk in CC 1:2:4 using 20 mm HBGS excluding cost of Reinforcement grill inposition including moulding curing and finishing etc; complete complying with standard specifications.
Supplying and fixing P.V.C rainwater down fall pipe of 110mm dia with necessary shoes, bends,& clamps etc
Paving the floor with scratch proof ceramic tiles of any colour and any size laid in CM 1:2, 20mm thick. And pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with the standard specifications and as directed by the departmental officers.
Paving the floor with scratch proof Anti Skid tiles of any colour and any size laid in CM 1:2, 20mm thick. And pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with the standard specifications and as directed by the departmental officers.
Dadooing walls with Glazed tiles of sizes 150mm X150mm X 6mm size of approved make and quality and colour lSet in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed.
Weathering course with best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be listed) over the RCC roof slab in the proposition being brickjelly to lime 32:12:1/2 by volume and laid over into a single layer and consolidated to required finished thickness beating the mixture with wooden beaters keeping the surface constantly welted by sprinkling lime jaggery water including all other labour charges etc., complete
Finishing the top of the roof with one course of Machine PressedTiles of size 20 cm x 2 cm of approved quality laid in CEMENT MORTAR 1:3(One cement and three sand) 12 mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar,red oxide, etc., complete complying with standard specification
Supply and Fixing of Cudappah slab including cost and all labour chrges etc.
Distempering two coats with best approved cement paint including cost and conveyance of all materials to site and all labour charges etc complete
Painting two coats with ready mixed Exterior Emulsion paint of approved qualityand colour over a priming coat, including through scrapping,clean removel of dirt etc complete .
Painting two coatsover new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with best approved best quality of synthetic enamel paint of approved colour over the existing priming coat etc., complete complying with standard specifications and as directed by the departmental officers.
Fabrication and supply of mild steel Door of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete. 1.Door size 1.10m x 2.10 m
2. Door size0.75m x 2.10 m
3.Door size 1.50m x 2.10 m
4.Grill Gate 1.50 x 2.10 m
Fabricating Supply and fixing and position of Rolling Shutters 18 gauge M.S. sheet with necessary hinges, tower bolts, aldrop length 30mm and hold fast etc., complete with one coat red oxideprimer.
Fabrication and supply of mild steel Window of any size with double leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete.
Towards supply and delivery of rcc jolly specification.
Towards Labour Charges for fixing in position of steel Door including cost and conveyance of all materials to work site and labor charges etc complete.
Towards Labour Charges for fixing in position of steel Window,Weldmesh& Glassed Ventilator including cost and conveyance of all materials to work site and labor charges etc complete.
Supply and fixing of 5A or 10 Amps or 20 Amps AC single phase 230 V , 50 HZ Watt hour metre on suitable TW box Complete with earth Connections of 500 V with fuse and neutral (side handle ) on suitable T.W.box with earth connection only.[SD no.124]
Supply and fixing of TNEB meter Board sutable for 32 A Single Phase service connection with 32 A Fuse Unit (500V) 32 A neutral link and earth link (1" X 1/8" copper plateon TW plank ofSize 375 X 300 X 19 mm with suporting TW Reepers of 1" thick on either side with painting with suitable bolt and nuts for fixing th TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.[SD no.125]
Supply and fixing of 16 Amps DPIC switch of 500V grade with Fuse and Neutral on suitable T.W. board with painting of suitable color with PWD Earthling (SD No.142)
Supply and run of 2X6.0 sq.mm (22/0.3) polythene insulatedPVC sheathed heavy duty SC.Copper conductor of 1100 V grade in 25mm dia GI pipe(Class B) suitably bent on both ends with necessary Angle iron upright and end supportes for Mains[SD NO. 71]
Supply and run of 2 of 6.0 sq.mm polythene insulated PVC sheathed heavy duty SC.Copper conductorof 1100 V grade on 7/20 GI bearer wire for service connection mains [SD NO.70]
Wiring with 2 x 2.5 Sq.mm PVC unheated SC allocable of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with PVC accesories in flush with wall,with 3mm thick hylum sheet cover with TW switch box and F.T switch and 5 A FT switch and making good of the concealed portion with suitable colour for PVC concealed light point / Fan Point SD 25
Wiring with 2 x 2.5 Sq.mm PVC unheated SC allocable of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm T.W. switch box in flush with wall, covered with nylon sheet of 3mm thick 5 Amps 3 pin non - interlocking C.S. Plug top with painting of suitable color for open PVC plug point.- SD -41.
Supply and fixing of single box type 4'-40W flourescent tube fitting with copper choke and condenser with TW round block on wall or ceiling with flourescent tube with PVC unsheathed copper leads from terminals to the fitting of Tube Light [SD 88 ]
SupplyandfixingofWTbulkheadfittingwithguard(Philips/Bajaj/Crompton/K-Lite)suitablefor11WCFLlamp with CFL SD 83
Supply and Fixing of Ceiling fan including cost and conveyance of all materials and labor charges etc complete. SD 110
Supply and fixing of Zinc sheet Box for Watt Hours Meters Etc Complete.
Supply,Delivery and fixing of HDPE Tank as per IS 12701/1996 including loading , Unloading Etc 1000 litres Capacity
GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)
Guru and Co
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .