SPL REPAIR WORK FOR BLDG NO 50 (GUARD ROOM), 27A (MT PERS LINE), MH -07 (ADM BLOCK) MH-42 (PM OFFICE) OF MH ALWAR AND SPL REPAIR TO BLDG NO 20 AND 34 FOR JCO SINGLE LIVING ACCN OF 42 ARTY DIV PRO UNIT AT JP LINE ALWAR UNDER AGE B/R-I AT ITARANA ALW

Amount

S&F in repairs powder coated stainless steel drapery rod of 25 mm dia (in lengths as directed) of approved colour with & including decorative bowel at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C all as specified & as directed.

S&F in repairs door closer hydraulically regulated, designation No. 3, aluminium (Die cast) body, universal type (ISI marked) complete all as specified & as directed.

S&F in repairs brass mortice lock, vertical type, size 65mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified.

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store

Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal to store

S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor all as specified.

S&F steel tubing medium grade 20mm bore with all fittings fixed complete to wall and or laid in floor all as specified.

S&F in repair rotational moulded polyethylene water storage tanks (white colour) (cylindrical vertical with closed top) of capacity 500 Ltrs hoisted and fixed in position incl all necessary fittings (nipple, socket, union etc) complete all as specified in SSR Part I and removing to store, complete all as specified and directed.

S&F in repairs 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe, minimum weight - 210 gms ball valves any type all as directed.

S&F in repairs 20mm dia brass Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern EWC), coloured, floor mounted coupled closet, including connection to drain (or outgoing pipe), anti-sypohonage pipe etc, with & including WC seat cover coloured closed pattern with flat bottom and cover, CP jet nozzle, vitreous china symphonic action type twin flush flushing cistern of 10 litre capacity with lid, necessary fittings complete all as specified & as directed.

S&F in repairs vitreous china squatting pan, Orissa pattern, size 580mm x 440mm white with integral foot rests connection to trap and to flushing pipe, etc. complete including making good to floor complete all as specified & directed

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc. with and including plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified & as directed.

S&F in repair thin rim table top basin size 480mm x 380mm x 135mm with and including 32mm CP waste coupling & PVC flexible waste pipe of 900 mm long complete all as specified and directed.

S&F in repair vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) alongwith spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified & directed

S&F in repairs vitreous china wash basin white of size 550mmx400mm (ISI marked) flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets, CP waste coupling and PVC waste pipe and cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 ltrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of poly ethylene of low or high density of PVC 32mm dia for LLFC complete all as specified.

S&F in repairs PVC connection of 15mm bore with 2 Nos. PTMT nuts, 600mm long fixed with adapter and washers at both the ends complete all as specified and as directed

S&F in repair towel rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to all as directed

S&F in repair Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) fixed with cement complete all as specified and directed

S&F in repairs 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes complete all as specified and as directed.

S&F in repairs 15mm bore, fancy type 3-Hole Basin Mixer without popup waste system but including plain waste 32mm size with aerator complete cast copper alloy, chromium plated, screwed down high pressure, with long screwed shanks & fly nuts, screwed for iron pipes complete all as specified and as directed.

S&F in repairs 15mm bore, brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed.

S&F in repairs 15mm bore brass chromium plated shower rose 65mm size with swivel joint type including fixing to steel pipe or union complete all as specified.

S&F in repair Toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

S&F in repairs sink with drainage board made out of stainless steel 1mm thick sheet for kitchen with and including plug, washers, waste pipe, cast iron centilever bracket, connecting union over all minimum size 915mmx460mm with bowl size 410mmx330mmx160mm complete all as specified and directed

S&F in repair looking mirror 5mm thick including cutting, grinding, polishing and chamffering of edges of glass, fixed with and including 20mm dia fancy type stainless steel fixers- 04 Nos in each mirror fixed to wall complete all as specified and as directed.

S&F in repair 15mm bore long body, fancy type, chromium plated bib tap cast copper alloy with crutch or butter fly handle complete all as specified

S&F in repairs 15mm bore Stop valve/angle valves, fancy type chromium plated cast copper alloy screwed down high presure, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F as in repair 15mm bore, 2 way angle valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repair chromium plated health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube of ABS wall hook including making conncetions and fixed in position complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors / walls complete all as specified & directed

S&F in repair PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified & directed

S&F in repair PVC (SWR) bends any radius 110 mm bore complete all as specified & directed

S&F PVC (SWR) vent cowl 110mm complete all as specified & directed

S&F in repair 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified & directed

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed

S&F in repair PVC (SWR), 110mm junction single, (Single T) equal or unequal complete all as specified & directed

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key, scrubbing down with water etc all as directed.

M&L rendering 10mm thick in CM (1:6) on fair faces of brick/stone masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

M&L rendering 15mm thick in CM (1:4) on brick/stone wall surfaces or other than fair faces of brick work & surfaces, finished even and smooth without using extra cement with water proof compound. Note :- Water proofing compound shall be measured and paid separately here-in-after.

M&L rendering 10mm thick in CM (1:3) on concrete surfaces in ceiling, soffits and the likes; finished even & smooth without using extra cement complete all as specified.

M&L rough cast plaster on exterior walls applying the under coat of cement and sand mortar (1:3) not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm ) mixed with coarse sand and cement in the raio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified and directed

Preparing newly pastered surfaces of wall & applying three coats of white wash complete all as specified.

Preparing newly Plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty of approved tint complete all as specified and directed

Preparing newly plastered surfaces of walls & applying two coats of cement base paint of approved shade/tint complete all as specified and directed.

Preparing newly pastered surfaces & applying three coats of white wash on ceiling, soffits and the likes; all as specified.

Complete removal of existing treatment on walls and preparation of surfaces of walls and applying two coats of oil bound distemper (OBD) over a coat of 1 mm thick birla wall care putty complete all as directed.

Preparing old decorated plastered surfaces of walls and applying one coat of cement base paint of approved shade/tint complete all as specified & as directed.

Preparing old decorated plastered/unplastered surfaces of walls and applying one coat of white wash complete all as specified..

Preparing old decorated plastered/unplastered surfaces of ceilings and applying one coat of white wash complete all as specified..

Preparing old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified.

S&F 300mm long helical/rat tail rod pattern door spring with MS sheet wing pattern including roller plate complete all as specified and directed.

S&F in repair pressed steel shutter 1mm thick including pressed steel frame of 1.25 mm thick sheet, 12mm dia MS rod for locking, two Nos chromium plated handle and one Godrej pattern lock including two coat of spray painting over a shop coat of primer, complete, all as shown in Drg No. TD/2004/29 sheet No. 1/3 to 3/3

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L 25 thick PCC (1:2:4), Type B-0 (using 12.50mm graded crushed stone aggregate) as in floors sub base complete all as specified and as directed.

M&L Vitrified Ceramic tiles 10 mm thick in light shade(square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over with and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L Vitrified Ceramic tiles 10 mm thick in light shade(square/rectangular) polished, coloured, double charged /ultra charged glossy, premium quality, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over with and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L Non Skid Coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over with and including 15mm thick screed bed in CM (1:6) complete all as specified.

M&L machine cut kota stone slab flooring 18-20mm thick laid over with and including 20 mm thick screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed.

M&L 50mm thick Sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n.exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in CM (1:4) complete all as specified & directed.

M&L 40 mm thick PCC (1:2:4), Type B-1 (using 20 mm graded stone aggregate) as in flooring complete all as specified & directed.

S&F plastic dividing strips, 1.5 mm thick and 38mm in width inserting in position conform to position complete all as specified and as directed.

M&L 50 mm thick PCC(1:3:6), Type C1 (using 20mm graded stone aggregate ) as in plinth protection finished fair and even complete all as specified & directed.

M&L PCC(1:3:6) type C1 (using 20mm graded stone aggregates) in roof kerb, rounded and chemfered edge, benching to manhole complete all as specified

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to stores and rubbish off premises all as specified and as directed.

M&L Glazed ceramic coloured tiles in vertical surface 450mmX 300mmX 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles and laid over with and including 10 mm thick rendering in CM (1:4) complete all as specified & directed.

M&L vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in wall, dado, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over with and including 10 mm thick rendering in CM (1:4) complete all as specified & directed

M&L machine cut kota stone slab 18-20mm thick in steps for riser, dado, skirting, wall etc laid over with and including 10 mm thick rendering in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed.

M&L 20mm thick Granite slab of approved shade, as in platform etc, bedded & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) with and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

Dismantling framed timber scantling 40 Sqcm and over in section, in any position complete all as specified and as directed.

S&F MS steel work in tubular trusses and tubular posts, purline, rafter including special shaped washers etc., complete using but welded. RHS/SHS confirming to IS 4923 : 1997 complete all as specified & directed

M&L Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 W (Gde E-250) Quality B ,complete all as specified & directed

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified & directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified & directed

M&L PCC (1:4:8), Type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified & directed

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified & directed

M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets/AC boards, any thickness, including cover fillets and removing from site complete all as specified and as directed.

M&L False ceiling with ArmGyp-FB ceiling tiles of 595mm x595mm, 7mm thick (as approved by GE) fixed with and including galvanised iron powder coated inverted "T" or "L" section (concealed GI frame work) of mettalic or equivalent suspended from ceiling with provision of galvanised wire 4 mm dia and wall taping screw including butterfly clip, hold down clips for fixing the board to frame complete all as per manufacurer's instructions all as directed and specified. (a) size of main tee 39 x 24.4 x 0.8 mm (b) size of wall angle 22.2 x 22.2 x 0.65 mm (c) size of grid 0.61 x 0.61 mm complete all as directed and specified.

M&L PVC False ceiling with 12mm thick PVC prelam perforated false ceiling panel made of 2mm thick pvc prelam lamination colour sheet both side of 8mm thick glasswool or themocol tiles of size 600x600mm (as approved by GE). Prelam perforated pvc sheet manufactured by an ISO-9001-2015 crtified company is stuck with glasswool/thermocol on both side with suitable adhesive. The panel fixed with and including galvanised iron powder coated inverted "T" or "L" section (concealed GI frame work) of mettalic or equivalent suspended from ceiling with provn of galvanised wire 4 mm dia and wall taping screw including butterfly clip, hold down clips for fixing the board to frame complete all as per manufacurers instructions all as directed and specified. (a) size of main tee 39 x 24.4 x 0.8 mm (b) size of wall angle 22.2 x 22.2 x 0.65 mm (c) size of grid 0.61 x 0.61 mm complete all as directed and specified.

S&F Solid PVC Wall Lining consisting of 5mm thick decorative colour laminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

Taking down Chowkats or frames with shutters ( without taking off shutters from the frame) n.exc. 1.5 Sqm each & removing to store complete all as specified and as directed.

Taking down Chowkats or frames with shutters ( without taking off shutters from the frame exc 1.5 Sqm but n.exc 4 Sqm each & removing to store complete all as specified and as directed.

S&F 35mm thick IInd class hard wood factory made panelled door shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified & directed

S&F 35 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats complete all as specified & directed

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid PVC Moulded door shutter 28 to 30mm thick (Stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification complete all as specified & directed

M&L Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified & directed

S&F 300mm anodised aluminium sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified & directed

S&F Butt hinges 100mm long medium weight, colled rolled mild steel complete all as specified& directed

S&F 150mm anodised aluminium barrel tower bolts of extruded section and fixed complete all as specified & directed

S&F 150mm anodised aluminium handles, cast type complete all as specified & directed

Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed

M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floor in PCC (1:2:4) type B-0 to match the existing floor Fe-410 (Gde-E250 quality A).

M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains hand made sliding bolts; clamps hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed

S&F anodized aluminium frame and other sections for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.

S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with and including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed.

S&F anodized aluminium door shutters, aluminium section weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc. complete all as specified & as directed.

S&F for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified & as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

S&F 4.80 mm thick sheet glass ordinary quality in squares n.exc. 0.5 Sqm each pane complete all as specified and directed

S&F 4.80 mm thick sheet glass ordinary quality in squares exc. 0.5 Sqm each pane complete all as specified and directed

S&F 4.00 mm thick frosted/figured sheet glass, in squares n.exc. 0.5 Sqm each pane complete all as specified and directed

Demolition mud in roofs, any thickness, including plastering, existing treatment and cleaning (whether full thickness removed or only part thereof) etc in all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified & directed

M&L PCC (1:2:4), Type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to a minimum consolidated thickness of 25 mm as leveling course, laid and compacted in min slope 1:30 over roof complete all as specified & directed

M&L screed laid 15mm thick in CM (1:4) with water proofing compound over green concrete surface, finished even and smooth (without using extra lime or cement) complete all as specified & directed Note : Water proofing compound shall be measured and paid separately here-in-after.

M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per Sqm including cleaning surfaces over bituminious primer complete all as specified & directed

M&L APP based polymeric membrane minimum weighing 3.5 Kg/Sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by torch on application method complete all as specified and directed.

Supply only Integral water proofing compound

S&F in repair glass corner shelf in 3-sets for each complete all as specified and directed.

S&F in repair Liquid soap container of Chromium plated brass screws and wooden/plastic cleats fancy type as approved by GE

S&F in repair Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for 100mm dia bore pipe incl bolts and nuts and securing ends of stays to wall or roof complete all as specified

M&L writing letters or figures(Block,roman,Italic or Indian letter n.exc 30cm high) complete as directed

M&L fully glazed toughened glass door 12mm thick in single panel (the glass shall have necessary rounding finish or bevelled edge as per the requirement) including complete accessories (i.e. hydraulically operated floor spring machine, SS handle in suitable size or dia, heavy brackets, lock, SS patch fittings, frosted films etc) complete all as specified and directed.

S&F in repair factory made PVC shutter Cabinet of required size, fabricated by joining for 18mm thick PVC Celluca ply with prelaminated sheet on one side cut to desired size of shutter and fixed with frame as in cabinet boxes with shelf and shutter full size fitted under or above the kitchen cooking plateform incl all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc including dismantling boarding any description. Note (i) : Items like cupboard knobs, stainless steel channel, CP plate clip hinges are included in the unit rates of this item. (ii) For payment purpose , area of front elevation shall be considered.

S&F 50mm thick steel fibre reinforced (SFRC) manhole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard minimum load bearing capacity 3 ton /Sqm in square rectangular or Circular shape complete all as specified and directed

M&L 75 mm thick PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base of floors, pavings, pathways etc complete all as specified & directed

M&L rubber moulded coloured Chequered cement concrete tiles 300mm x 300mm x 25mm thick, set, jointed and pointed in neat cement slurry in floors, pavings etc. with gray cement and pigment with and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L 60mm thick machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 , M-35 Grade and laid over with and including 25mm thick sand cushion complete all as specified and as directed

Dismanlting of kerb stone including cement bedding & removed off rubble to a designated place complete all as specified and directed.

M&L providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), with and including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5 mm) with and including making drainage opening wherever required complete all as specified and as directed.

M&L for PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) for 150 mm dia bore drain pipe for bed concrete including packing under and hunching against the sides of pipe after they are laid and tested complete all as specified and directed

M&L 150 mm reinforced cement concrete pipes, class NP-2, laid and jointed in CM (1:1) with collars complete all as specified and directed

Excavation in trenches n.exc. 1.5 Mtr wide and n.exc. 1.5 Mtr in depth for foundation and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material, n.exc 50 Mtr and depositing where directed at a level n.exc 1.5 Mtr above the starting point complete all as specified and directed.

S&F Brass chromium plated bottle traps 32mm dia for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified & directed.

Taking down carefully copper/Aluminium point wiring for light/fan/socket/light fitting/power point and taking down of teak wood batten / PVC casing caping/PVC conduit/steel conduit and making good disturbed surfaces of walls/ceilings /floors etc with and including dismantling of fittings complete all as specified and directed.

Taking down unserviceable DB TPN/SPN any type and of any capacity and making good to disturbed surfaces to match with the existing finish complete all as specified and directed.

M&L point wiring complete with 1.5 Sqmm single core multistranded copper conductor fire resistant low smoke (FRLS) PVC insulated and unsheathed cable 1100 Volts grade confirming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20 mm external dia) but shall be increased as per actual site requirement in accordance with clause No. 19.125 of SSR Part-I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling including 1.5 mm FRLS PVC insulated unsheathed copper earth wire including sunken type pressed steel terminal boxes electro plated of suitable size with bakellite white/coloured top sheet cover 3.0 mm thick for one light / fan point controlled by one way switch all as specified & directed.

All as per serial item No. 136.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.

All as per serial item No. 136.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.

All as per serial item No. 136.00 here-in-before but for one bell/buzzer point controlled by one push button on independent board.

All as per serial item No. 136.00 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.

All as per serial item No. 136.00 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 4.00 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 4.00 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.

S&F ceiling fan regulator electronic step type 230 volts single phase.

S&F switch piano, flush type, single pole, one way, 5/6 Amp, 230 Volts.

S&F bell push, flush type, 5 Amp ISI marked, 230 Volts.

S&F switch socket combination outlet 3 pin 6/16 Amps flush type multipurpose with fuse & neon indicator ISI marked.

S&F ceiling rose surface bakelite 65mmx50mm with two or three terminal complete all as specified.

S&F inverter rechargeable LED batten tube light along with fixture, 3 feet long, 1x20 W AC, energy saving, backup upto 4 hours, powerful lithium battery -5600 mah, long battery life - 500 + recharge cycle charging time 8 to 10 hours including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make : Halonix, Havells, Phillips, Wipro.

S&F decorative ultra slim liner LED lighting fixture with extended poly carbonate environmental friendly, energy efficient suitable for 20W with LED tube of model E-LITE LED pride and connecting up, complete all as specified and directed.Make : Havells cat part No. LHEXBHP71N1W018 or equivalent of philips/Crompton Greaves/ bajaj/Wipro/GE

S&F LED type street-DRACO SERIES light luminaire 20 watt 230 V 50 Hz including all necessary fitting accessories and LED complete all as directed. Make: C&S Cat Part no. LTESS20WLED or equvalent Crompton Greaves /Wipro

S&F in repair street light bracket made to shape at required angle made out of 32mm dia (light grade) / suitable size for fitting of security light GI tubing of length not less than 1.0 mtr long suitable for fixing / holding street light fittings including mild steel flat iron 32 x 3mm clamp 02 Nos with bolts, nuts and washers complete all as specified and as directed.

S&F lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified.

S&F in repair sheet metal enclosures double door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar,8 way, 240 Volts.

S&F in repair multi music bell, 230 volts, single pole AC.

S&F in repair MCB 32/40 Amp, single pole & neutral, 240 Volt complete all as pecified & directed.

S&F in repair MCB 6-40 Amp, single pole 240 Volt complete all as pecified & directed.

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 10 sqmm 4 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified & directed. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid separately under relevant items.

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 16 sqmm 2 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified & directed. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid separately under relevant items.

S&F sub main wiring on and including passing through PVC conduit pipe 1100 Volts grade with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm and continuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm of green colour confirming to IS 694/1990 with and including taking down existing U/S sub main wiring. (Note: Two runs of cable with one run of earth wire and one run of PVC Coundit should measured as one length)

M&L earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & directed.

M&L brick work with FLY ASH BRICKS(As Per IS-13757(1993) burnt clay fly ash building bricks), (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection and complete all as specified & directed.

M&L dry sand and punning for cushioning to under ground cable all as directed. Note :- For the purpose of payment only punned thickness shall be measured.

M&L rewinding of ceiling fan 1200/1400 mm sweep with super enamelled copper wire of existing gauge including insulation material varnishing and drying complete all as specified and directed.

M/S Naglot Enterprises (BID ID -3115235)

shiva construction (BID ID -3118428)

M/s Laxmi Enterprises (BID ID -3120958)

Hitesh Construction (BID ID -3135055)

M/s S Amarjit Singh (BID ID -3135467)