Repairs to storm water drain/path in Golkonda Enclave, Vikram Enclave and Holiday Home and Repair to perimeter fencing/boundary wall at AGE Aurangabad under GE(S) Ahmednagar

Amount

Demolition cement concrete (un reinforced) in ground floor and pavings n.exc 15 cm thickness (above or below ground level) all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling of posts or struts (wood, steel or RCC) embedded in concrete, brick work, masonry etc, any section including taking out embeded portion and making good disturbed ground complete all as specified and directed.

Demolition of brick work/stone masonary built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc complete all as specified and as directed.

Dismantling old barbed wire / chain link fencing, any description complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar, internal dia of pipe 300mm all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

Excavation in trenches, n exc 1.50m wide and n exc 1.50m in depth; for foundations, etc. or for manholes etc not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil all as specified and as directed.

Excavation in post holes in any type of soil each not exceeding 0.5 Cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil to a distance not exceeding 50 m and making good surface all as specified.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick with soils all as specified and as directed.

Removing excavated material to distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed.

M&L for plain cement concrete, 1:4:8 type D2 using 40 mm graded aggregate in foundations, filling and mass concrete all as specified and as directed.

M&L for plain cement concrete 1:3:6, type C2, using 40 mm graded aggreagte as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for PCC 1:3:6 type-C1 using 20 mm graded aggegate as in coping, cills, plinth courses, string courses, bed plates including weathering, slightly rounded or chamfered angles and throating etc including necessary form work complete all as specified and as directed

M&L for PCC 1:3:6 type-C1 using 20 mm graded aggegate as in surface channel, benching in manhole complete all as specified and as directed

M&L for RCC 1:2:4, type B1 usng 20mm graded stone aggregate as in plinth beams, bands and like including necessary formwork complete all as specified and as directed.

M&L in repairs precast cement concrete jalli, 35 mm thick (measured solid), in PCC 1:2:4, type B0 using 12.5 mm graded aggregate, set in cement mortar 1:4 complete all as specified and directed.

M&L for precast reinforced cement concrete 1:2:4, type B1 using 20 mm aggrgateas in manhole covers and like including necessary form work and set in cement mortar 1:6 complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mrtar 1:6 complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunch- ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete flat all as specified and as directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally, hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

M&L for mild steel TMT bars 5mm dia and over and incl 10 mm dia in stirups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally, hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

M&L for machine made, mild steel bolts, 12 mm dia shank with hexagonal or square head one end and screwed the other or screwed both end, each screwed end to be fitted with, washers and one hexagonal or square nut, length not exceeding 15 cm long complete all as specified and as directed.

M&L for machine made, mild steel bolts, 10 mm dia shank with hexagonal or square head one end and screwed the other or screwed both end, each screwed end to be fitted with, washers and one hexagonal or square nut, length not exceeding 65mm long complete all as specified and as directed.

M&L for mild steel angle/flat iron as in supports for posts/strut for securing barbed/chain link fencing any description including drilling holes, notching for wire etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F galvanized 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc complete all as specified and as directed.

Supply only chain link fencing net, mild steel galvanised, made out of GI wire, complete all as specified and as directed. Note :- Dia and mesh size shall be as decided by GE.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards,rails, straining bolts etc including provision of bindig wire complete all as specified and as directed.

S&F mild steel round bars as in line bars, cut to length, bent to shape required for fixing of chain link fencing complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished surfaces even and fair all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on stone masonry surfaces or other than fair faces of brick work finished even and fair complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls applying two coats of cement base paint over a coat of primer all as specified and as directed

M&L for preparation of old decorated surfaces of walls including cornices and applying two coats cement base paint (any tint) complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description, not exceeding 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for 300 mm internal dia reinforced concrete pipes with collars, class NP2, laid and jointed complete all as specified and as directed.

M&L for cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate for bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 300mm bore pipes all as specified and as directed.

sonu enterprises

M/s IBEX Engineers and Contractors

B.R.ANAND

D V Engineers and Contractors Pvt Ltd

M/s.M G Kulkarni