REPAIR TO LEAKAGE, SEEPAGE TO SUNKEN PORTION IN OTM AND MD ACCN UNDER AGE B/R-II OF GE (EAST) JALANDHAR CANTT

Amount

Demolition of brick work as in walls/ parapet walls removing grass fungus weed, roots of trees completely, grown on roof/ wall surfaces complete all as specified and directed.

Material and labour for brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:6) complete all as specified and directed.

All as per Ser item No 2.00 above but except bricks

Taking down cement plaster/ terrazzo cast in situ of any description thickness including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar (1:6) on internal fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar (1:4) (external) on fair faces of brick wall or concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for 5mm thick rendering in cement mortar (1:3) as on ceiling including finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of 1mm average thick wall putty complete all as specified and directed.

Material and labour for preparation of new plastered surface of wall and applying three coats of white washing complete all as specified and directed.

Material and labour for preparation of new plastered surface of ceiling and applying three coats of white washing complete all as specified and directed.

Material and labour for preparation of newly plastered or un-plastered surface of walls including cornices, plasters etc. and applying two coats of cement base paint complete all as specified and directed.

Dismantling floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.

Material and labour for 25mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in sub floors, sub base; concrete surfaces finished fair & even to receive topping floor finish/ layer complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles of size 300 x 300x 7mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles of size 400 x 400x 7mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7mm thick as in vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 15mm thick in cement mortar (1:4) complete all as specified and directed.

Demolition of cement concrete in ground floor and paving/ sunken portion (below or above ground level) complete all as specified and directed.

Material and labour for cement concrete (1:5:10) type E-2 using 40mm graded brick aggregate as in filling in sunken portion and mass concrete complete all as specified and directed.

Material and labour for rendering 10mm thick cement plaster on brick or concrete surfaces in cement mortar (1:3) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. Note : WPC shall be measured and paid separately.

Supply only integral water proofing compound all as specified and directed.

Material and labour for priming surfaces and applying heavy treatment (for severe conditions) using glass fibre base bitumen felt, grade 2 complete all as specified and directed.

Dismantling of brick tiles single layer as in roof covering all as specified and directed.

Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

Material and labour for 12mm thick cement plaster in cement mortar (1:3) on concrete roof surfaces finished even and fair, including cleaning the roof top by water etc complete all as specified and directed.

Cleaning the surface and made free of dirt, foreign particle, laitance followed by grinding all protrusion to made surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expiation contraction. Cutting the grooves with suitable cutter machine in V groove filled with repairs mortar/ micro-concrete/ general purpose grout as recommended proportionally as per recommendation of manufacturer. Making of goll as at all the corners with polymer modified mortar (1:4) cement sand with 3.5% acrylic of cement weight all as specified and directed

Supply and applying high build elastomeric waterproofing coating based on pure hydrophobic polyurethane cold applied of spray/ brush applied, membrane with an elongation of 280% and tensile strength of 2.7N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1:1 (Resin : Harder) application with 100% water dilution and pure polyurethane application in 2 coats with a total min consumption of 1.25 Kg/Sqm all as specified and directed. Note : Application should be done with Graco sprayer by a company authorised applicator.

Material and labour cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in foundation, filling and mass concrete, roof padding etc. (average thickness 50mm) complete all as specified and directed.

Dismantling of AC sheets/ CGI/ Galvalume any thickness as in roof covering all as specified and directed.

Material and labour for 6mm thick asbestos cement fibre corrugated/ semi corrugated sheets as in roof coverings fixed with L-type or J-type hooks or cranked bolts complete all as specified and directed.

All as per Ser item No 29.00 above but except sheets

Material and labour for asbestos cement two piece adjustable ridge for corrugated or semi corrugated sheets 6mm thick fixed with L or J type hooks complete all as specified and directed

Supply and fixing Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

Supply and fixing Pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

Supply and fixing 0.63mm thick galvanized corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 275, fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and directed

All as per Ser item No 34.00 above but except sheets

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply and fixing rolled mild steel work roof trussed (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, Angle, Channel or Flat Sections) including distance pieces, cleats etc, Fe-410-W (Gde E-250) complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Supply and fixing false ceiling with Everest fibre cement designer tile ivory painted (high pressure steam cured) of 4mm thickness (as per IS : 14862) of size 595 x 595mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on interlocking meta grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main ‘T’ runner with suitably spaced joints to get required length and 15 x 32mm made from 0.3mm thick sheet and cross ‘T’ of size 15 x 32mm made of 0.30mm sheet, spaced between main ‘T’ at 600mm c/c to form a grid of 600 x 600mm and wall angle of size 15 x 20mm made of 0.30mm thick sheet and laying false ceiling tiles in the grid including, required cutting/ making, opening for services like diffusers, grills, light fitting, fixtures, smoke detectors etc. main ‘T’ runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin, etc with dash fasteners, GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main ‘T’ bottom exposed width of 15mm of all T-sections shall be center black pre-painted with polyester paint and having a load bearing capacity of 12 Kg/ Sqm complete all as specified and directed

Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking up or down 15mm bore old steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm bore old steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Material and labour for galvanised steel tubes 15mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc. complete all as specified and directed.

Material and labour for galvanised steel tubes 20mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc. complete all as specified and directed.

Material and labour for refixing old tubing 15mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and directed.

Material and labour for refixing old tubing 20mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and directed.

Supply and fixing in repair bib tap cast copper alloy chromium plated suitable for 15mm bore iron pipe with long body fancy type complete all as specified and directed.

Supply and fixing in repair pillar tap, cast copper alloy chromium plated, with capstan heads, 15mm bore dia of pipe screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

Supply and fixing in repair 15mm angle/ stop valves, fancy type chromium plated, screwed down, high pressure with crutch or butterfly handle screwed at two right angles ends for both iron pipe complete all as specified and directed.

Supply and fixing in repairs angular stop cock with wall flange suitable for fixing to 15mm bore GI pipe complete all as specified and directed

Supply and fixing in repairs overhead shower 105mm dia single flow suitable for fixing to 15mm bore GI pipe complete all as specified and directed

Supply and fixing brass chromium plated tubular towel rail 20mm dia, ‘D’ type, 600mm long between flanges fixed in repairs complete all as specified and directed.

Supply and fixing chromium plated health faucet for EWC with 1 m long CP tube with CP wall hook superior quality suitable for 15mm dia for iron pipe or for brass ferrule, fixed in repairs complete all as specified and directed.

Supply and fixing in repair CP jet spray with holder for EWC 1.5m long complete all as specified and directed

Supply and fixing in repair PVC connection 15mm bore size with 02 Nos PTMT nuts of length 450mm complete all as specified and directed.

Supply and fixing in repair new flexible PVC waste pipe of approved quality 32mm bore, 75cm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed

Supply and fixing in repairs soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified and directed.

Supply and fixing vitreous china white wash down water closet pan (Pedestal Pattern) with trap and fixing bolts (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc. and making good to floor/ disturbed surfaces including dismantling the existing unserviceable water closet complete all as specified and directed

Supply and fixing vitreous china squatting pan Orissa pattern size 580 x 440mm white with front or back inlet, integral foot rest including CI 'P' or 'S' trap with providing lime concrete bedding and connecting to flushing pipe complete including breaking up existing damaged WC seat and make good to floor complete all as specified and directed.

Supply and fixing in repairs plastic water closet seat cover (White) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging devices complete all as specified.

Supply and fixing PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bend etc. complete all as specified and directed.

Supply and fixing in repair vitreous china wash hand basin, white, flat back size 550 x 400mm including one number brass CP waste coupling, 32mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

Supply and fixing in repair rotational moulded polyethylene water storage tanks, 500 litres capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed

Supply and fixing rotational moulded polyethylene water storage tanks, 1000 litres capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed

Material and labour for disconnecting existing PVC tank of any capacity, setting aside (or lowering, if required) for repairs, cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc and finally washing the internal surfaces with bleaching powder/ soap solution etc, reconnecting and refixing in position including making connections and writing Cleaned on (Date) and 'Next date of cleaning (Date), 4" height with stencils on outer face of tank with white paint complete all as specified and directed

Supply and fixing 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) complete all as specified and directed.

All as per Ser item No 67.00 above but in repairs

Supply and fixing PVC cover of water tank matching with existing water tank complete all as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc., including cleaning for re-fixing or removal to store complete all as specified.

Supply and fixing PVC (SWR) rain water pipes single socketed in any length with rubber ring joints laid in floors 110 mm bore complete all as specified and directed.

Supply and fixing PVC (SWR) rain water pipes single socketed in any length with rubber ring joints laid in floors 75 mm bore complete all as specified and directed.

Supply and fixing PVC (SWR) bends any radius 110mm bore complete all as specified and directed.

All as per Ser item No 73.00 above but 75mm

Supply and fixing 110mm bore PVC (SWR) branches piece, double (double Y) equal or unequal with rubber rings joints fixed to walls complete all as specified and directed

All as per Ser item No 75.00 above but 75mm

Supply and fixing PVC (SWR) junction single (Single ‘T’) 110mm bore all as specified and directed.

All as per Ser item No 77.00 above but 75mm

Supply and fixing PVC (SWR) vent cowl 75mm bore all as specified and directed.

Material and labour for 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement fixed in repairs complete all as specified and directed.

Material and labour for grubbing up bushes or trees trunk of girth n. exc. 10cm including cutting of tree/bushes grown in/over walls, digging out roots and making good the disturbed portion of wall with PCC (1:3:6) type C-1 using 20mm graded stone aggregate including matching the same complete all as specified and directed.

B.P CONSTRUCTION CO

M/S Vinod Kumar

NATIONAL BUILDERS

PAUL CONSTRUCTION CO.

KABEER CONSTRUCTIONS