Construction of Pump House (60 cs) with tail regulator at RD 0 of Khidwali link drain out falling at RD 73460-R of Drain No. 8

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.50 mt in width or 10 sqm on plan) incluling getting out and disposal of excavated earth lead up to 50 mts and lift up to 1.50 mts as directed by Engineer- in- charge. HSR item No. 4.12

Dressing bed and preparation of sub grade for lining by mechanical/ mannual means HSR item No.14.1

Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. M-15 grade plain cement HSR item No.6.22.2.2

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. HSR item No.6.25.1

1st class brick masnory 1:4 in foundation & plinth HSR item No.7.21

Providing 10mm thick cement plaster 1:3 HSR item No.11.5.3

Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect HSR item No.6.33.6

Supply & fixing of rolling shutter HSR item No.13.37.1

Providing and fixing panelling or panelling and glazing in panelled or panelled sqm and glazed shutters for doors, windows HSR item No.18.10

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete HSR item No.13.27

Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568, for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, as per directions of Engineer-in-charge HSR item No.12.20.1

Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing HSR item No. 11.76

Applying pink primer or aluminium priming coat on wood work including preparation of surface, Knotting and stopping etc HSR item No.11.77

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade HSR item No.11.78

Smooth finishing of the exposed surface of R.C.C. work with 10 mm thick HSR item No.11.11.1

Centering and shuttering including strutting, propping etc and removal of form work for foundation footing bases of coulmn HSR item No.6.29.1

Centering and shuttering including strutting, propping etc and removal of form work for Lintels, beams, plinth beams, girders, bressumers HSR item No.6.30.5

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies HSR item No.6.30.3

Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, sqm buttresses, plinth and string courses etc. HSR item No.6.30.2

Providing and fixing ball bearing for rolling shutters. HSR item No.13.38

Supply & fixing Windows frames (Chowkhats) including mullions consisting frame fabricated from sheet roll formed out of 0.58mm thick galvanized sheet (Base steel as per IS 513) with zinc of 120 gm/sqm steel sheet pre coated (as per approved colour) with Polyester paint of 12-16 microns thickness under coat of EPOXY primer & back coat with ALKYD backer of 5-7 microns, total sheet thickness with coating 0.58mm of approved shade, weld less corner assembly with brackets & screws, fixed in position by means of PVC & metal hold fastener with PVC cap complete in all respects as per drawing, design, specification & entire satisfaction of Engineer-in-charge.Windows Outer frame of size 72mm x 55mm and central mullion HSR item No. 13.22.1

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) HSR item No.11.64.1

Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. Group C HSR item No.23.4.1.1

Providing & Fixing of machine moulded common burnt clay non-modular brick tiles of class designation 12.5, HSR item No. 9.12.1

Providing and Laying 80 mm thick ISi marked lntertocking Paver Blocks conforming to IS 15658:2006/IRC SP 63: 2004 of all shapes and colours in design mix cement M 40 over the bed of 30 mm thick fine sand complete in all respect HSR item No.17.69.2

Supplying and fixing in position PVC pipe HSR item No.9.57.2

PVC Bend 150mm dia HSR item No. B0240

Providing and fixing Gate and Gearing arrangements on tail Regulator approved vide Chief engineer vide letter no 2224-25/9LCU /2021 dt 11-05-2021 for Pump House (NS item)

Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :2 coats HSR item No. 11.72.2

Ceiling fan 48'(1200mm) (IS 374) HSR item No. PH013

Ishwar Singh Contractor