Provn of Tin Shed with cemented wall behind rest room of security watch towers No 1 2 3 4 Provision of Road Furniture covered seating arrangement 3 seater RCC Bench and Provision of Vehicle Garage for Unit Bus at 2W Det Goa under GE Gomantak

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/ disintegrated rock complete all as specified and directed.

All as per item No 1 above but in hard/dense soil complete all as specified and directed.

M&L for Cement concrete (1:4:8) type D2 as in foundations, filling and mass concrete complete all as specified and directed.

M&L for Cement concrete (1:2:4) type B2 as in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC Type B-1 1: 2:4 (20mm graded aggregate) as in coping incl necessary formwork complete all as specified and directed.

S&F for Rolled mild steel Roof trusses (framed), trussed purlins crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk), forming holes, without any attachment Fe 410W(Gde E-250) quality B complete all as specified and directed.

M& L for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F 0.80mm thickness plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

M&L for preparation of new steel surfaces and apply two coat of Anti corrossive paint over a coat of anti corresive primer complete all as specified and directed.

S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to MS pipes complete all as specified and directed.

S&F for 100mm stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F for 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/disintegrated rock complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth and not exceeding 10 sqm on plan and getting out in hard dense soil.

M&L for Pre-cast cement concrete type C1 (1:3;6) block masonry with solid blocks, exc. 10 cm in width and setting in mortar (1:4) complete all as specified and directed.

M & L for Precast cement concrete block masonry grade C-1(1:3:6 using 20mm graded stone aggregate) with solid blocks exc 10cm in width and setting in mortar 1:6 complete all as specified & directed.

Returning, filling in , including, spreading, levelling, watering and well ramming in layers not exc 25cm thick the excavated soil complete all as specified and directed.

Removing excavated materials ( hard/dense soil) to a distance n.exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M & L 15 mm thick rendering on fair faces of concrete in CM 1:6 finish the surface even & smooth without using extra cement complete all as specified and directed.

Material & Labour for providing two coats of oil-bound distemper over a coat of alkali-resistand primer on new plastered surfaces wall care putty 1 mm thick including necessary preparation to surfaces complete all as specified and directed.

M & L for rendering 15mm thick on block masonry surfaces in CM 1:4 to be finished even and smooth (without using extra cement) complete all as specified and directed.

M & L for applying three coats of white wash on new wall surface including preparation of surface complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls all as specified & directed by Engineer-in-Charge

M&L for hardcore broken stone or boulders of gauge exc. 63 mm but n exc 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to true surface complete all as specified and directed.

M & L for hard core, broken to gauge n exc 63 mm for plinth protection/ under floor complete all as specified and directed.

Material & Labour for 100 mm thick PCC type C-2, 1:3:6 (using 40 mm graded aggregate), as in sub base of floor complete all as specified and directed.

M&L for screed bed or bedding layer of mortar of 20mm thick laying floor finish in CM 1:4 complete all as specified and directed.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed .

M&L for Plain cement concrete 1:2:4 Type B2 (using 40 mm graded stone aggregate), 100mm thick as in sub base complete all as specified and directed

M&L for 75 mm thick cement concrete type, C2 1:3:6 using (40 mm graded aggregate) as in plinth protection finish the surface even and smooth complete all as specified and directed.

M&L for machine cut Kota stone slab of size 600mm x 600m x 18 to 20 mm thick as in flooring , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finished including over screed bed of 15mm thick in CM 1:6 complete all as specified and directed .

M&L for 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pined joints complete all as specified and directed.

M&L for 35 mm thick 2nd class hard wood plain framed pannelled shutter (any number of panels) with panels of timber flat on both sides or of veneered particle board medium density , wood particle board with commercial face veneers , supplied and fitted to chowkats complete all as specified and directed.

M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F for 100mm long Stainless steel Butt hinges fixed to door frame complete all as specified and directed.

S&F for 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 150mm long Fancy type Aluminium handles, cast type, anodised complete all as specified and directed.

S&F for 200mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S & F for powder coated (50 micron) Aluminium window or ventilator shutter and frame any type (slidding or openable) with frame or other similar work etc section fabricated by using the JINDAL/ INDAL /HINDALCO /sections including necessary roller,wheel cleat handals locking arrangements also to receive 4.8mm thick glass with aluminum chanel beading and stainless steel screw including and rubber gasket beading etc complete (the weight of rubber gasket beading will not be measured with the weight of aluminum shuter glass will be measured and paid separately) All scections as approved by GE

S&F for 4.0 mm thick Sheet glass, ordinary quality and glazing with oil putty/rubber beading in square/Rectangular n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F for Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

Supply and fixing Aluminum powder coated deco grill make DG 104 (10 mm thick section ) incl 'F'/'L' channel alround grill complete all as specified and directed .

Supply and fixing of Precast RCC Bench for 3 seater complete all as specified and directed

Supply and fixing of stainless steel sign board made of 3mm ACP board with night glow radium letters including logo & stainless steel frame 2 nos of stainless pole with 50mm dia for fixing the board of size 1.0mx1.20m all as specified and directed

Supply and fixing as in replacement for vitreoues china WHB, white, flat back, of size 550x400mm including CP brackets, CP waste coupling 32 mm bore, PVC waste pipe 32mm dia with and including 15mm bore PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed.

S&F for 20mm Unplasticised CPVC pipes of pressure rating 10 kgf/cm2 fixed complete to , ceilings or in floors etc., any type of pipe complete all as specified and directed.

S & F for 15 mm dia pillar taps fancy, chromium plated, screwed down high pressure, screwed for iron pipe complete all as specified and directed.

Material and labour for point wiring complete as specified with 1100 V grade 1.5 Sqmm two runs of single core PVC insulated unsheathed multistranded copper conductor cable FRLS grade, conforming to relevant IS, drawn through and including PVC non metallic conduit (ISI Marked) with all accessories concealed in wall , ceiling, including sunk pressed steel terminal boxes made out of 2 mm thick MS sheet concealed in walls with 3 mm thick laminated Hylem sheet top cover fixed with brass screws for housing switches, socket, regulator etc including one run of 1.5 sqmm single core PVC insulated and unsheathed copper conductor cable FRLS grade as earth continuity wire connected to common earth and earth dolly including testing complete all as specified and directed by Engr-in-Charge for the following:-

(a) One light/fan.

(b) One 5 pin switch socket outlet 5 Amps on independent board controlled by one switch.

Material and labour for point wiring complete as specified with 1100 V grade 4 Sqmm two runs of single core PVC insulated unsheathed multistranded copper conductor cable FRLS grade, conforming to relevant IS drawn through and including PVC casing and caping (ISI Marked) with all accessories fixed on surfaces of wall, ceiling, including sunk pressed steel terminal boxes made out of 2 mm thick MS sheet concealed in walls with 3 mm thick laminated Hylem sheet top cover fixed with brass screws for housing switches, socket etc including 4 Sqmm one run of single core PVC insulated and unsheathed copper conductor cable FRLS grade as earth continuity wire connected to common earth and earth dolly including testing complete all as specified and directed by Engr-in-Charge for one 6 pin switch socket outlet 15 Amps on independent board controlled by one switch.

Supply and fix switch piano flush type single pole, one way 5 Amp.

Supply and fix Switch socket combination 2 in 1, 3 pin, 5 Amp type universal

Supply and fix Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal

Supply and fix ceiling rose, surface bakelite, 65x50 mm, two to three terminals complete.

S & F LED tube light fitiing 20W.

Supply & Fixing integrated LED Bulk Head fitting surface/ceiling mounted round/square type with LED 10 watts ,IP 65 complete Make : Philips/Wipro/Bajaj/Havells

Supply and fix sheet metal enclosure (DB) for MCB's, 4 way, single pole and neutral, 240 volts, double door complete.Make : Legrand (Ekinox 3) or equivalent in C&S/Havells

Supply and fix MCB, single pole & Neutral, 6-32 Amp, 240 Volts, 'C' Curve 10KA.

Supply and fix MCB, single pole, 6-32 Amp, 240 Volts, 'C' Curve 10KA.

Material and labour for earthing complete with galvanised steel earth plate electrode 600mm x 600mm x not less than 6mm, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level, connected to galvanised earth lead wire 4.00mm dia by means of bolts , nuts, check nuts and washers of GI/steel all as shown in electric plate No 3 connected to earth test point/MCB DBs all as specified and indicated complete and including charcoal dust ,salt etc and GI protection pipe medium grade 15 mmand GI watering pipe 20mm medium grade with funnel and wire mesh,40 mm thick precast RCC M-15 (Nominal mix) cover reinforced with XPM weight not less than 4 kg/sqm with suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover, PCC M-15(Nominal mix) pit, excavation and earth work in any type of soil and connected all as specified and directed by Engineer-in-Charge.

Supply and fix stepped type electronic fan regulator flush type .

Supply & fixing brushless direct current (BLDC) ceiling fan 1400mm sweep (ISI Marked), 230 volts, 26 Watt includung connection rod all as per specified and directed by Engr-in-Charge. Make : Orient/Havells/Bajaj

Supply, Laying, joining & testing LT XLPE Insulated & sheathed armoured electric cables with multistranded aluminium conductor cable 1100 volts grade, laid in trenches/ ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes & aluminium lugs for connection for cross- sectional area 10 Sq mm 2 Core complete all as specified and directed.

Supply and fix for DWC high density polyethylene pipes having dia 50mm having outer side wall corrugated and inner surface plain confirming to IS 14930 (Part-I & II) including straight/bend couplers to join two pipes for protection of underground cable laid in trenches/floor/fixed on pole/wall including all fittings and clamps as required complete all as specified and directed.

Supply and fix GI tubing (light grade) with all fittings,laid in trenches, or fixed along with walls /poles,bore of pipe 40mm.

Leela Enterprises

CVS CONSTRUCTIONS

Tara Construction

M/S DUBAL CONSTRUCTION

M/S Kartik Enterprises

M/S jvsr constructions

STAR FABRICATION

AATREYA CONSTRUCTION

K M SUBHANAIAH