MANUAL RESCUE AND OPERATION RESCUE AND COMPREHENSIVE MAINTENANCE AND REPAIR OF LIFTS INSTALLED IN BLDG NO. 267, 268, 269, 270, 271, 276, 277 AND 278 AT NCHC POWAI GE (NW) BHANDUP

Amount

Mannual Rescue and Operation Rescue of lift from 0600 hrs to 2200 hrs in two shifts operated by one operator in each block per shift on all days including holidays and during all type of weather / climatic conditions, providing rescue to the trapped person, maintaining the lift and connected equipments and accessories including lift room in clean and tidy condition during the operation period and also Mannual Rescue and Operation Rescue of lift in case of failure of commercial supply by running of DG set installed within the vicinity meant for lift supply and also maintaining the necessary documents complete all as specified and directed .Note:- (a) Quoted Rate shall be deemed to include to provide one alternative employee (reliever) to provide the services, so that the other employee can avail the facility of weekly leave etc. Location : ( Block No 269 Type-IV, G+12 (2 Lifts) , Block No 270 Type-III , G+16 (3 Lifts) and Block No 271, G+16 (3 Lifts) Type-III ) at NCHC East Camp Powai comprising, ( 5 lifts of 8 person & 03 lifts of 13 person Total 8 lifts Otis make)

All as per ser No 1.00 here-in- before, Location :Type -III ( Block No 276, G+16 (3 Lifts) , Block No 277, G+16 (3 Lifts) and Block No 278, G+16 (3 Lifts) ) at NCHC Powai comprising, ( 5 lifts of 8 person & 03 lifts of 13 person Total 8 lifts kone elevators make)

All as per ser No 1.00 here-in- before, Location : TYPE - II, Block-1 ( P/ 267, G+16 3 Lifts) , Block- 2 (P/268, G+16, 3 Lifts) at NCHC Powai comprising, ( 4 lifts of 8 Passenger & 02 lifts of 13 Passengers = Total 06 lifts Johnson make)

SCHEDULE 'A' PART- II (PERIODICAL MAITENANCE Periodical repairs/maintenance of daily, weekly, fortnightly, monthly, quarterly, half yearly & yearly (as per routine) including attending lift in case of emergency any time for a period of one month for one No. "Kone" make automatic electric passenger lift of capacity 544 kgs ( 8 passengers) with automatic sliding door to serve ground plus sixteen upper floors (Total seventeen openings) including replacement of oil and minor spares like nuts,bolts,control wires and thimbles as required installed at. building P/276 G+16 Floors,Lift no : MVN/518/07172020/43159. Note:For major repairs items from S.No 19 to 35, no extra labour charged shall be paid and the same deemed to be included with serial item no 1,2, &3

All as per ser No 4.00 here-in- before, but Lift no:MVN/518/04122020/42905

All as per ser No 4.00 here-in- before, building P/277 G+16 Floors,Lift no : MVN/518/1022021/43291

All as per ser No 4.00 here-in- before, but Lift no:MVN/518/01022021/45290

All as per ser No 4.00 here-in- before, building P/278 G+16 Floors, Lift no:MVN/518/01022021/45290

All as per ser No 4.00 here-in- before, but Lift no:MVN/518/01022021/45290

Periodical repairs/maintenance of daily, weekly, fortnightly, monthly, quarterly, half yearly & yearly (as per routine) including attending lift in case of emergency any time for a period of one month for one No. "Kone" make automatic electric passenger lift of capacity 884 kgs ( 13 passengers) with automatic sliding door to serve ground plus sixteen upper floors (Total seventeen openings) including replacement of oil and minor spares like nuts,bolts,control wires and thimbles as required installed at. building P/276 G+16 Floors,Lift no : MVN/518/041/22020/42903.Note:For major repairs items from S.No 19 to 35, no extra labour charged shall be paid and the same deemed to be included with serial item no 1,2, &3.

All as per ser No 5.00 here-in- before, P/277 G+16 Floors,Lift no : MVN/518/041/22020/42904

All as per ser No 5.00 here-in- before, P/278 G+16 Floors,Lift no : MVN/518/041/22020/42906

Periodical repairs/maintenance of daily, weekly, fortnightly, monthly, quarterly, half yearly & yearly (as per routine) including attending lift in case of emergency any time for a period of one month for one No. "Johnson" make automatic electric passenger lift of capacity 544 kgs ( 8 passengers) with automatic sliding door to serve ground plus sixteen upper floors (Total seventeen openings) including replacement of oil and minor spares like nuts,bolts,control wires and thimbles as required installed at. building GANGA(267) G+16 Floors,Lift no:L-I9211. Note:For major repairs items from S.No 19 to 35, no extra labour charged shall be paid and the same deemed to be included with serial item no 1,2, &3.

All as per ser No 13.00 here-in- before, building P/267 G+16 Floors, Lift no:L-I9212

All as per ser No 13.00 here-in- before, building GOMATI (P/268) G+16 Floors, Lift no:L-I9213

All as per ser No 13.00 here-in- before, building GOMATI (P/268) G+16 Floors Lift no:L-I9214

Periodical repairs/maintenance of daily, weekly, fortnightly, monthly, quarterly, half yearly & yearly (as per routine) including attending lift in case of emergency any time for a period of one month for one No. "Johnson" make automatic electric passenger lift of capacity 884 kgs ( 13 passengers) with automatic sliding door to serve ground plus sixteen upper floors (Total seventeen openings) including replacement of oil and minor spares like nuts,bolts,control wires and thimbles as required installed at. building GANGA(267) G+16 Floors,Lift no:L-I9215.Note:For major repairs items from S.No 19 to 35, no extra labour charged shall be paid and the same deemed to be included with serial item no 1,2, &3.

All as per ser No 17.00 here-in- before, but building GOMATI(268)Lift no:L-I9216

Supply only in repairs existing unserviceable infra-red door protection edge / sensor (Lambada) with latest new infra-red door protection edge for full height of car door edge for 8/13 passenger to serve G+12/16 floors for 'Johnson/Kone' make lifts.

Supply only in repairs of main steel wire hoist rope, multi-stranded, 10 mm dia , heavy duty as per all as specified and directed

Material only in repairs of governor rope of dia 8 mm, multi-stranded confirming to relevant IS specifications with make and pullies of suitable size as per complete all as specified and directed

Supply only in repair replacement of door motor suitable for 8/13 passenger lift all as specified and directed by Engg in charge

Taking out existing unserviceable cabin fan and in lieu providing new cabin fan, non-oscilating type,axial flow,single speed, 300mm sweep, 240 volt, with grill,(make: EMCO/VBM/CINI), Complete all as specified and directed

Taking out existing light fittings and in lieu Supply new LED light fittings with sensor, 8/16 watt complete with and including LED, sensor, drive all accessories complete, fixtures of make Legrand/Schneider/ABB or equivalent of make as approved by the GE

Dismantling and taking out existing 8/13 passenger lift Main Traction pulley supply only new main traction pulley of suitable capacity complete all as specified

Dismantling and taking out existing 8/13 passenger lift governor pulley supply only new main governor pulley of suitable capacity complete all as specified

Dismantling existing unserviceable VVVF drive and supply of variable voltage variable frequency (VVVF) drive suitable for 7.5/12.5 HP motor, 3 phase 400V, 50Hz with multiple micro program chip based link each other in network, thermal over load protection etc of make Yashkawa -Japan, suitable for Johnson/kone make lift all as specified and directed by the Engineer-in-Charge.

Supply only in repairs rechargeable, maintenance free lead acid batteries of 12 Volts, 18 AH for ARD system

Supply only new IGBT card to ARD system including testing complete all as specified and directed.

Taking out unserviceable automatic door operator drive and in lieu providing new automatic door operator drive with controller fitted on top of car lift including testing and commissioning etc suitable for 8/13 Passenger serving ground +16 floors, johnson make lifts, complete all as specified and directed.

Material only for rewinding of double speed electric motor 3 phase, 50 Hz, 415 Volts 7.5HP comprising of undermentioned activities for motors of the following capacities complete all as specified and directed :- (i) Disconnecting and removing electric motor from installed position, loading and unloading into motor vehicle and transporting to nearest workshop; (ii) Dismantling existing burnt winding from motor,cleaning of rotor and rewinding complete with super enamelled copper winding wire of existing gauge including insulation material as required; iii) Bringing back electric motor duly rewinded including loading and unloading, transporting from workshop to site of work including making necessary electric connections, commissioning and testing in actual working condition for 8 hrs continuously to check RPM, Ampere, load and overall performance ; (iv) Replacement of worn out ball bearings - 02 Nos. for each motor as per existing size and make, RPM complete all as specified and as directed :-

Material only for rewinding of double speed electric motor 3 phase, 50 Hz, 415 Volts 12.5 HP comprising of undermentioned activities for motors of the following capacities complete all as specified and directed :- (i) Disconnecting and removing electric motor from installed position, loading and unloading into motor vehicle and transporting to nearest workshop; (ii) Dismantling existing burnt winding from motor,cleaning of rotor and rewinding complete with super enamelled copper winding wire of existing gauge including insulation material as required; iii) Bringing back electric motor duly rewinded including loading and unloading, transporting from workshop to site of work including making necessary electric connections, commissioning and testing in actual working condition for 8 hrs continuously to check RPM, Ampere, load and overall performance ; (iv) Replacement of worn out ball bearings - 02 Nos. for each motor as per existing size and make, RPM complete all as specified and as directed :-

Material only for load test as per OEM direction for 13 Passager lift complete and submit test report all as specified and directed

Material only for load test as per OEM direction for 8 Passager lift complete and submit test report all as specified and directed

Dismantling and taking out unserviceable existing door its mechanism and supply only complete landing door mechanism centre opening type with new stainless steel hair line finish door panels side guards, jamb channel etc for 800 mm clear opening suitable for 8/13 passenger lift to serve G+16 floor all as specified and directed

Monarch Enterprises

Shree Elevator Engineering Co.

Escon Elevators Pvt Ltd

Veer High Tech Solution