WBPWD/SEWEC /BED /NIQ-74 /2024-25

Amount

Supply & Delivery of 7.5 mtr. Long (Overall length-7.5 mtr, Planing depth-1.5 mtr, Height above Ground-6 mtr.) MS Swaged type Tubular pole (410 SP-9) (Make- Bansal /Jindal/ Bajaj / Transrail) incl. MS base plate with pole cap having following dimensions:- i) Bottom :- 114.3 x 5.40 mm. - 4.5 Mtr. ii) Middle :- 114.3 x 3.65 mm. - 1.5 Mtr. iii) Top :- 88.9 x 3.25 mm. - 1.5 Mtr. (Approx. pole weight 110 K.G) (Test Certificate from the Manufacturer is to be submitted)

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhamametal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly. a) upto 9.0 mtr. Size (0.6 x 0.6 x 1.7 mts.)

Extra on items 2 above, for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/ polythene pipe entry as directed for street light wiring, incl. S & F 25cmx25cmx10cm GI Loop box, 16SWG & incl. drilled hole in pole

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint

A) Upto 9.0 mtr. long pole

i) One coat of red lead/Zinc chromate priming

ii) 1st coat of synthetic enamel paint over the primer

iii) 2nd coat of synthetic enamel paint over the 1st coat

Painting the 1.5 mtr long pole armbracket with two coats of Aluminium paint over two coats of red lead primer after preparation of surface.

Supply & Fixing single/double/Four arm header fabricated with 100mm dia G.I. pipe of 10" length welded with 1.5 mtr long 40mm dia. G.I. pipe at an angle of 15 deg with plate incl. S / F nuts, bolts washer etc. As per G.S.

a) Single arm header( Annexure Attached )

b) Double arm header ( Annexure Attached )

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint

Supply and fixing of 240V, 100-120 Watt LED Lens Type Street Outdoor luminaries (>120 lm/W) having Pressure dia cast aluminum housing. Heat resistant glass. IP65 or higher grade protection, inbuilt 10kV SPD and uniform distribution with suitable fixing arrangement incl necessary interconnection as per direction & instruction of EIC. (Make:Suriya-Lexon SLEULI110IP66 /jaguar - Roadways OSLGRYLSRT015120XC/Benlo Ultima - BL18SL100WULT . [05(five) years Warranty Certificate and Test Certificate of the luminaire from the Manufacturer is to be submitted].

Supply and fixing of 240V, 70-80 Watt LED Street Outdoor luminaries (>120 lm/W) having Pressure dia cast aluminum housing. Heat resistant glass. IP65 or higher grade protection, inbuilt 10kV SPD and uniform distribution with suitable fixing arrangement incl necessary interconnection as per direction & instruction of EIC.. (Make- Surya-LEXON SLEUL72IP66 /Jaguar- OSLGRYLSRT015070XC/Benlo ultima-BL18SL70WULT)05(five) years Warranty Certificate and Test Certificate of the luminaire from the Manufacturer is to be submitted].

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Make- RR/ Polycab/ Gloster/ Havells/ KEI) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required.

i) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

ii) 2x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

Supply and laying of 650/1100 Volts, 3 core 1.5 sq. mm Stranded Copper Cable, PVC/ XLPE Insulated, Cores Laid Up, Extruded PVC (Upto 4 core) / Thermoplastic Tape Inner Sheathed, Unamoured and Extruded PVC Type ST2 Outer Sheathed As Per IS-7098 (Part 1) [Make: POLYCAB/RR KABLE /KEI]

Earthing with 25 mm dia GI pipe (ISI medium) of 2.5 Mts. long and 1 x 8 SWG GI (Hot Dip) wire (2 Mts. long), 6 mm dia x 50 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below. (for pole earthing)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below

i) By ISI-Medium GI pipe

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.

SUPPLY & LAYING CABLES

Supply & Delivery 1.1KV grade LT Aluminium PVC Armoured cable (Make- Polycab/ RR/KEI). The cable shall conform to IS 7098/ Part I with anti termite and anti rodent features. (Test Certificate from the Manufacturer is to be submitted)

i) 4 core X 25 sq. mm.

ii) 4 core X 10 sq. mm.

iii) 4 core X 6 sq. mm.

iv) 2 core X 6 sq. mm.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables.

i) 4 core X 25 sq. mm.

ii) 4 core X 10 sq. mm.

iii) 4 core X 6 sq. mm.

iv) 2 core X 6 sq. mm.

Finishing of the XLPE/PVC insulated armoured cable ends by crimping method with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc.

i) 4 core X 25 sq. mm.

ii) 4 core X 10 sq. mm.

iii) 4 core X 6 sq. mm.

iv) 2 core X 6 sq. mm.

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required.

i) 40 mm dia

ii) 50 mm dia

Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core

Supply and fixing 4 way SS enclosure with IP-20/30 protection, powder coated (Make- Legrand) concealed in wall after cutting the wall & meding good the damages to original finish incl. painting, connection and provision for Ph, Neutal & earthing arrangement including supply and fixing of 32A, 240V, 10kA, C-characteristics DP MCB (Make- Legrand) and 24Hr programmable Analogue dial timer switch running reserve day dial back up by nickle cadmium battery [ L&T GEC / ABB/ Legrand]

Supply and fixing of 240 V timer DB with suitable size sheet steel enclose double door, phosphatised powder coated, neutral bar , din rail with IP-43 protection comprised with 1 no. 32A DP MCB (‘C’ Curve, 10KA), 1 no. 24 hours programmable analog timer switch (min 15 min interval setting) and 1 no. 32A (AC-3) contactor, 1 no. 32A timer bypass switch, out going stud/ bar complete with internal wiring by 1.1kV grade 4 sq mm. FR PVC insulated copper wire incl. 1 no. auto manual by pass troggle switch and provision for earthing attachment incl. LED indicating light for running condition with locking arrangement. [Make:- L&T/Legrand /Cabtree/Siemens]

Supply of 240V, 100 Watt LED Floodlight Outdoor luminaries (>120 lm/W) having Pressure dia cast aluminum housing. Heat resistant glass. IP65 or higher grade protection, inbuilt 10kV SPD with suitable fixing arrangement. (Make- Surya-LIVIA-SLEFL100WIP66 /Jaguar- LED STAR- OFLGRYLFLS100XC /Benlo ultima-BL17FL100WULT )(five) years Warranty Certificate and Test Certificate of the luminaire from the Manufacturer is to be submitted]

Supply of 240V, 150 Watt LED Floodlight Outdoor luminaries (>120 lm/W) having Pressure dia cast aluminum housing. Heat resistant glass. IP65 or higher grade protection, inbuilt 10kV SPD with suitable fixing arrangement. (Make- Surya-LIVIA-SLEFL150WIP66 /Jaguar- LED STAR- OFLGRYLFLS150XC /Benlo ultima-BL17FL150WULT ) [05(five) years Warranty Certificate and Test Certificate of the luminaire from the Manufacturer is to be submitted]

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure.

Fixing only Floodlight fittings on top of masonary structure by 3 Nos. 10 mm dia x 87 mm long rag bolts, nuts & double washers complete either 37 mm x 10 mm MS flat support/or by other means as required.

i. Charges for cutting floor of RCC incl. mending the damage as per GS (Civil Work)

ii. Charges for Pitch road cutting incl. mending the damage as per GS ( Civil Work)

iii. Charges for Concreate mixture 1:1.5:3 ( Cement: Sand: Stone chips ) as per GS ( Civil Work)

iv. Charges for cutting morrum soil/ soft soil/ concrete incl. mending the damage as per GS ( Civil Work)

G.M.N. ENGINEERING (BID ID -5607059)

DAS TRADING CO (BID ID -5607026)