WELCOME MAINT OF OFFRS MD ACCN OF AGE B/R-II UNDER GE (WEST) LUCKNOW

Amount

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick wall or concrete surface including finishing the surface even and smooth without using extra cement including taking down cement or cement lime plaster on walls any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.

M& L for Vitrified tiles double charged 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

All as per item No 2 above but in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 including dismantling of existing tiles complete all as specified and directed.

M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors joints free, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for glazed ceramic tiles (coloured) 300x450x7mm/300x600 x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering (as screed bed) in cement & sand mortar 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L 18-20 mm thick granite stone slab, machine cut and polished as in cooking platform, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone, laid over and including 20mm thick screed bed in cement mortar 1:4, including rubbing, grinding, making hole for gas pipe line and including making sandwitch moulding to edges etc as required including dismantling of existing stone slabs of any description or thickness in floors, aprons etc complete all as specified and directed.

S&F in repair bib tap 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule including all accessories complete all as specified and directed.

S&F in repair of CP angle valve long body for 15 mm bore pipe with capstan head long screwed shank including CP cover plate fancy type complete all as specified and directed.

S&F in repair 15 mm bore CP brass Central Hole Basin/ kitchen mixture fixed to GI pipe.complete all as specified and directed

S&F in repair single lever wall mixture 3-in-1 system with provision for overhead shower with 115 mm long bend pipe, connecting legs and wall flange(without over head sower) screwed down for 15 mm bore GI pipe complete all as specified and directed.

S&F in repair toilet paper holder, superior quality, fancy type, brass chromium plated with flap complete all as specified and directed.

S&F in repair hand shower (health faucet), superior quality, round shape, single flow, brass chromium plated, with 1m long flexible pipe with wall hook bracket etc. and all fittings for EWC complete all as specified and directed.

S&F in repair 5.5mm thick sheet glass corner shelf assembly, fancy type, sheet glass shelf of size 250x250mm, with CP bracket guard and railing, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.

S&F in repair 5.5mm thick sheet glass shelf assembly, fancy type, sheet glass shelf of size 600mm long and 120mm wide with CP bracket guard and railing, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.

S & F in repair Brass spindle for mixer/wall mixer of any type or pattern complete all as specified and directed.

S&F in repair 20 mm bore gun metal gate valve with iron wheel head, screwed both ends for iron pipe including testing complete all as specified and directed.

S&F in repair CP brass tubular towel rail 20mm dia, 'D' type, 600mm long between flanges, superior quality, fancy type, fixed to wall with PVC gully and CP brass screws complete all as specified and directed.

S & F in repair looking mirror fancy type size 600 x 900 mm decorative pattern 5 to 6mm thick fixed on wall with stainless steel studs complete all as specified and directed.

S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed.

S&F in repair kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washers, waste coupling and waste pipe, including bedding in cement mortar 1:3 to dwarf wall or fixing cantilever brackets and connecting union to waste pipe, overall size 915mmx460mm with bowl size 410x330x160mm complete all as specified and directed.

Supply & Fixing in repair sink without drainage board size 560x410x200 mm made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes pipe & coupling etc incl bedding in cement mortar to draft wall or cantilever brackets and connection union to pipe complete all as specified and directed.

S & F in repair stainless steel kitchen plate rack made out of 1.00 mm thick stainless steel of size 900x750x250 mm including screws and weight not less than 5.00 Kg complete all as specified and directed.

S&F in repair ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and directed.

S&F in position rotational moulded polyethylene water storage tanks 500 Ltr capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismatling of exisitng tank complete all as specified and directed.

S&F in position rotational moulded polyethylene water storage tanks 1000 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismatling of exisitng tank complete all as specified and directed.

S&F in repair 18/19mm thick ply wood, grade BWR type BB quality, fixed with screw/nails to timber frame work complete all as specified and directed.

M&L 0.90mm thick Decorative laminates type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S & F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

S&F Continuous (piano) hinges, mild steel, bright finished or electro galvanised, with width of flap 30mm when open, and fixed with screws complete all as specified and directed.

S&F in repair magnet ball cateches with 8 mm dia steel bal and brass body and strike plate magnet ball catcher for cup board shutters complete all as specified and directed.

S&F 100mm long aluminum anodised, hasp and staple, safety type, with mild steel hinge pin including bolts to hinge plate and fixed with screws complete all as specified and directed.

S&F in repair 25mm dia stainless steel curtain rod (weight not less than 0.50 Kg/ RM) superior quality with end brackets and end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and directed.

S&F in repairs of 0.36 mm dia stainless steel wire cloth (G-304) with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading complete all as specified and directed.

S&F in repair two(double) legged floor door stopper of aluminum body & tougues with hard drawer steel spring fixed in floor of 140mm complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and fixing with wooden beads or oil putty and provsion of glazing pins in squares not exceeding 0.50 Sqm in each pane including hacking out old broken glass of any description and thickness from wooden/steel frames fixed with wooden beads/putty and complete all as specified and directed.

M&L for two coats of oil bound distemper over one coat of primer and 1mm thick layer of wall care putty on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for two coats of oil bound distemper over one coat of primer and 1mm thick layer of wall care putty on old plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old painted surface of wood and wood based material of any description area exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing old painted surface of steel/iron of any description area exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Complete removal of existing treatment of wall and M&L for two coats of oil bound distemper on previously treated plastered surfaces of wall over one coat of primer and 1mm thick layer of wall care putty including preparation of surfaces complete all as specified and directed.

S&F Powder coating Anodized aluminium frame for doors, windows, ventilators with one or more rebates using 1.50mm thick aluminium section including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coating anodized aluminium glazed window and ventilator shutters, side hung/ top hung type without sash bars, with aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 01 no. 150mm long peg stays, 02 nos. 100mm long hinges type B-21, 01 no. 150mm long tower bolts and 01 no. 125mm long handles complete all as specified and directed.

S&F of 0.36 mm dia stainless steel wire cloth (G-304) with average width of aperature 1.40 mm and fixed with stainless steel wire staples or moulded beading complete all as specified and directed.

M&L in repair mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F Providing and fixing factory made uPVC white colour Sliding window three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm ,5mm thick plain glass and required ccessories.area nexc 3 sqm complete all as specified and directed. Note: The unit rate quoted by contractor includes cost of glass, wire mesh and includes all other connected accessories. Net Opening will be measured for payment purpose.

S&F extended wall mounted closets Vitreous China wash down water closet pan, pedestal pattern, white, cascade type with built in flushing cistern and self closing plastic water closet seat cover, white, complete all as specified and directed.

S&F 'E' board everest make 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be poweder coated white. The frame work shall comprise of main runner made from 0.33 mm thick GS sheet and of size 24x32x300mm and spaced at 1200mm centers securely fixed to be structural soffts by approved hangers at 1200 mm maximum centrers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall, Flush fitting of 1200mm long cross tee (with double stiching) to be interlocked between main runners at 600mm center to from 1200x600mm modules cross tee longer than 600mm to be supported independtly. 600x600mm dodules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee, perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour as per manufacture insturction including dismantling of false ceiling and boarding any description complete all as specified and directed .

M/s Sachkhand Traders

M/s Bhadoria Associates

suniltraders

Spectrum Enterprises

M/s Chandra Mohan and Sons

QUALITY CONSTRUCTIONS CO

M/S KAUSHIK CONSTRUCTION