Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹12.9 LAccepted-AOC | L-1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates | |
| 2 | L-2₹13.8 L+₹94,476 (7.33%)Rejected-Finance R O SKERBUCHAN TEH KHALTSI LEH LADAKH 194106 | LEH LADAKH | LADAKH | 194106 | L-2 | Rejected-Finance Higher side quoted amount |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
11 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Khumbathang
CWE Khumbathang
REPAIR TO COMPOUND WALL, FENCING, GATES, HARD STANDING, CULVERTS, DRAINS AND PROTECTIVE WKS AT LAMAYURU, KHALTSI, HANUTHANG, ACHINATHANG, BATALIK AND BIAMAH IN THE AOR OF AGE B/R-II KHALTSI UNDER GE KHUMBATHANG
2022_MES_551997_1
80051/76/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Khaltsi
As per tender and NIT doc
8 documents required · 8 mandatory
₹500
GE Khumbathang
₹30,000
Yes
7 Nov 2022
14 Sept 2022
12 Oct 2022
14 Sept 2022
11 Oct 2022
28 Sept 2022
Amount
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground.(Posts embedded in concrete, brick work, masonry etc) complete all as specified and directed by Engr-in-Charge.
M&L Cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engr-in-Charge.
S&F in repair mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge.
Fixing only old serviceable dismantaled post/struts including embeding in concrete etc complete all as specified and directed by Engr-in-Charge.
Dismantling fencing wire mesh, any type complete all as specified and directed by Engr-in-Charge.
S&F chain link MS galvanisd fencing, any size or type including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed by Engr-in-Charge.
All as per srl item No. 6 here-in-before but except chain link fixing only
Supply and fixing in repairs of mild steel round bars 10 mm dia and over, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia ,or securing with clips of Fe-410W(Gde.E250) quality -A or Fe290(Gde-E-165) complete all as specified and directed by Engr-in-Charge.
S&F in repair galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
All as per srl item No. 9 here-in-before but except galvanised. 2 strand, steel barbed wire 2.24mm dia fixing only
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge.
S & F in repair of structural framed steel work, Fe-410-W (Gde-E-250) quality B as in Gates, with gusset plates,grill for window complete drilled for fixing of steel sheeting or other covering etc to be prepared for hanging or sliding with and including either hooks and hinges or steel handing door fittings (Exclusive or steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete all as specified and as directed by Engr-in-Charge.
M&L preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer over 10 cm width/girth including filling with filler where reqd complete all as specified and directed by Engr-in-Charge.
M&L preparation of old painted steel surfaces and applying one coats of synthetic enamel paint over 10 cm width/girth including filling with filler where reqd complete all as specified and directed by Engr-in-Charge.
Demolition of Brickwork or stone/block masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-Charge.
M&L for Precast cement concrete type-C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6) complete all as specified. and directed by Engr-in-Charge.
Taking down cement plaster on brick or stone walls, etc. including raking outjoints, hacking for key, scrubbing down with water, etc. complete all as specified and directed by Engr-in-Charge.
M&L for 15mm thick cement plaster in cement mortar (1:4) on brick work or concrete surface and finished surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L preparing new plastered surfaces of walls including cornices, pillasters etc. and applying two coats of cement base paint over a coat primer complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.
M&L for Machine pressed precast conctete interlocking paver block 60mm thick any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed by Engr-n-Charge.
M&L for 25 mm thick sand filling (crushed sand) under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge.
M&L for chequered cement concrte tile coloured 20x20x25mm thick with grey cement and pigment confirming jointed and pointed in neat cement slurry in floor including laid over 20mm thick screed bed of CM 1:4. complete all as specified and directed by Engr-in-Charge.
M&L for P.C.C. 1:5:10 type E-2 using 40 mm graded crushed stone aggregates as in flooring, PCC path, sub base, plinth protection and surface finished even & fair
M&L for cement concrete PCC 1:4:8 type D2 (40mm graded crushed stone aggregate) as in sub base to floor or similar works complete all as specified and directed by Engr-in-Charge.
M&L for 150mm thick cement concrete (1:2:4) type B-1, using 20mm graded crushed stone aggregaes as in hard standing/pavement and the like, laid in bays as directed, including finishing the surfaces even and smooth without using extra cement complete all as specified & directed.
Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealed with sealing compound, Grade `A' complete all as specified & directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete all as specified & directed. (Inner girth only measured)
All as per srl item No. 28 here-in-before but for each 25 mm girth or part thereof over or under 30cm ditto
M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in floor, drain hounching, benching, coping or similar works complete all as specified and directed by Engr-in-Charge.
Credit Note:- The accepted amount will arrived after deducting the sch of credit amount i.e. 33,650.00 as tender page number 25.
SONAM ANGCHOK
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .