Development plan of Swarajya Rakshak Dharmaveer Chhatrapati Sambhaji Maharaj Balidan Sthal at Village Tulapur Tal. Haveli and Samadhi Sthal at Village Vadhu (Bk.) Tal. Shirur Dist. Pune.

Amount

Excavation for foundation in earth, Soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) SSR 2022-23 Item No. 21.02 Sr.No. 721, Page No. 153, Bd.A.1 Page No. 259.

Excavation for foundation in earth, Soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m. to 3.0m.) SSR 2022-23 Item No. 21.04 Sr.No. 723, Page No. 153, Bd.A.1 Page No. 259.

Excavation for foundation in Hard murum including removing the excavated material necessary back filling, ramming, watering including shoring and strutting dewatering etc. complete. (Lift upto 1.5 m ) by Mechanical Means. SSR 2022-23 Item No. 21.06 Sr.No. 725, Page No. 153, Bd.A.3 Page No. 259.

Excavation for foundation in Hard murum including removing the excavated material necessary back filling, ramming, watering including shoring and strutting dewatering etc. complete. (Lift from1.5 m to 3.0m.) by Mechanical Means. SSR 2022-23 Item No. 21.08 Sr.No. 727, Page No. 154, Bd.A.3 Page No. 259.

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling with available earth / murum, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0m. ) SSR 2022-23 Item No. 21.16 Sr.No. 731, Page No. 154, Bd.A.4 Page No. 259.

Excavation for foundation in Hard rock by chiselling, wedging, line drilling etc including trimming and levelling the bed, removing the excavated material up to a distance of 50 m. beyond the building area and stacking as directed, dewatering, and back filling with available murum, ramming, watering etc. complete. for all leads & lifts By Mechanical means. SSR 2022-23 Item No. 21.20 Sr.No.735, Page No. 155, Bd.A.6 Page No. 260.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. SSR 2022-23 Item No. 21.22 Sr.No.737, Page No. 155, As directed by Engineer-In-Charge.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of Hephoclore per square metre of surface area covering ten years guarantee on bond paper. SSR 2022-23 Item No. 21.24 Sr.No.739 Page No.156, As directed by Engineer In Charge.

Filling in plinth and floors with approved excavated material in 15 cm. to 20 cm. layers including watering and compacting etc. complete.SSR 2022-23 Item No. 21.36 Sr.No.750, Page No. 157 Bd.A.10 Page No. 262.

Filling in plinth and floors with Contractors material / brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. SSR 2022-23 Item No. 21.37 Sr.No.751, Page No. 157 Bd.A.11 Page No. 263.

Providing dry / trap /granite / quartzite Rubble Stone Soling 15cm to 20cm thick including hand packing and compacting etc. complete. SSR 2022-23 Item No. 21.38 Sr.No. 752, Page No. 157, BdA 12 Page No.264.

Providing Soling using 80mm size trap metal in 15cm layer including filling voids with Crushed Sand / Grit, ramming, watering etc. complete. SSR 2022-23 Item No. 21.40 Sr. No. 754, Page No.157, As directed by Engineer-In-Charge.

Providing and Fabricating Structural Steel Work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed, including cutting, fabricating, hoisting, erecting, fixing in position, making riveted / bolted / welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. SSR 2022-23 Item No. 23.01 Sr. No. 816, Page No. 173, BdC 2 Page No.275.

Providing Structural steel work in Trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position, Making rivetted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting approved quality and shade etc. complete. SSR 2022-23 Item No. 23.04 Sr.No.819, Page No. 173 BdC 8 Page No. 278.

Providing and Fixing Mild Steel Grill Gate as per the detailed drawing including hinges, locking arrangements and painting in three coats od oil paint of approved colour and shade etc. complete. (weight 18kg to 20kg per Sq.M.) SSR 2022-23 Item No. 23.09 Sr.No. 824, Page No. 174, As directed by Engineer-In-Charge.

Providing Structural steel work in Hollow Sections of various thickness and sizes in Square, Rectangular and Round shape from 25mm to 450mm section as per IS-4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed design and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, Making rivetted / bolted / welded connections and painting coomplete. SSR 2022-23 Item No. 23.12 Sr. No. 826, Page No. 174 As directed by Engineer-In-Charge.

Providing and laying Cast in situ/Ready Mix cement Concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 24.01 Sr.No.827, Page No. 175 Bd. E. 1 Page No. 287

Providing and laying Cast in situ/Ready Mixcement Concrete in M20 of trap/ granite/quartzite/gneiss metal for Steps / Screed / Grade Slab, including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 24.06 Sr. No. 829, Page No. 175, Bd.E2 Page No. 288 and B7 Page No. 38.

Providing and laying Cast in situ/Ready Mix cement Concrete M-15 of trap/ granite/quartzite/gneiss metal for Coping to Plinth or Parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 24.16, Sr. No.835, Bd.E 3 Page No.288/ IS 456 (2000)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in Foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 25.15, Sr.No.838, Page No. 178 Bd.F.3 Page No. 298 and B.7, Page No.38.

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) , SSR 2022-23 Item No. 25.35, Sr.No. 843, Page No. 180 Bd.F.5 Page No. 300 and B- 7,Page No 38. GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) , SSR 2022-23 Item No. 25.35, Sr.No. 843, Page No. 180 Bd.F.5 Page No. 300 and B- 7,Page No 38. FIRST FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) , SSR 2022-23 Item No. 25.35, Sr.No. 843, Page No. 180 Bd.F.5 Page No. 300 and B- 7,Page No 38. SECOND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) , SSR 2022-23 Item No. 25.35, Sr.No. 843, Page No. 180 Bd.F.5 Page No. 300 and B- 7,Page No 38. THIRD FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) , SSR 2022-23 Item No. 25.35, Sr.No. 843, Page No. 180 Bd.F.5 Page No. 300 and B- 7,Page No 38. FOURTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) , SSR 2022-23 Item No. 25.35, Sr.No. 843, Page No. 180 Bd.F.5 Page No. 300 and B- 7,Page No 38. FIFTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) , SSR 2022-23 Item No. 25.35, Sr.No. 843, Page No. 180 Bd.F.5 Page No. 300 and B- 7,Page No 38. SIXTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 25.54, Sr.No.848, Page No. 181, Bd.F.6 Page No. 300 and B.7, Page No.38. GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 25.54, Sr.No.848, Page No. 181, Bd.F.6 Page No. 300 and B.7, Page No.38. FIRST FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 25.54, Sr.No.848, Page No. 181, Bd.F.6 Page No. 300 and B.7, Page No.38. SECOND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 25.54, Sr.No.848, Page No. 181, Bd.F.6 Page No. 300 and B.7, Page No.38. THIRD FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 25.54, Sr.No.848, Page No. 181, Bd.F.6 Page No. 300 and B.7, Page No.38. FOURTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 25.54, Sr.No.848, Page No. 181, Bd.F.6 Page No. 300 and B.7, Page No.38. FIFTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 25.54, Sr.No.848, Page No. 181, Bd.F.6 Page No. 300 and B.7, Page No.38. SIXTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M - 30 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 202-23 Item No. 25.74, Sr.No.853, Page No.183, Bd.F.8 Page No. 302 and B.7, Page No.38. GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M - 30 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 202-23 Item No. 25.74, Sr.No.853, Page No.183, Bd.F.8 Page No. 302 and B.7, Page No.38. FIRST FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M - 30 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 202-23 Item No. 25.74, Sr.No.853, Page No.183, Bd.F.8 Page No. 302 and B.7, Page No.38. SECONDFLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M - 30 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 202-23 Item No. 25.74, Sr.No.853, Page No.183, Bd.F.8 Page No. 302 and B.7, Page No.38. THIRD FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M - 30 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 202-23 Item No. 25.74, Sr.No.853, Page No.183, Bd.F.8 Page No. 302 and B.7, Page No.38. FOURTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M - 30 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 202-23 Item No. 25.74, Sr.No.853, Page No.183, Bd.F.8 Page No. 302 and B.7, Page No.38. SIXTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.19, Sr. No. 861, Page No. 185, Bd.F 11, Page No.304 and Bd 7 Page No. 38. GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.19, Sr. No. 861, Page No. 185, Bd.F 11, Page No.304 and Bd 7 Page No. 38. FIRST FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.19, Sr. No. 861, Page No. 185, Bd.F 11, Page No.304 and Bd 7 Page No. 38. SECOND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and Steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.26, Sr. No. 864, Page No. 186, Bd.F 14, Page No.305 / IS 456 (2002). GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and Steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.26, Sr. No. 864, Page No. 186, Bd.F 14, Page No.305 / IS 456 (2002). FIRST FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and Steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.26, Sr. No. 864, Page No. 186, Bd.F 14, Page No.305 / IS 456 (2002). SECOND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and Steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.26, Sr. No. 864, Page No. 186, Bd.F 14, Page No.305 / IS 456 (2002). THIRD FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and Steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.26, Sr. No. 864, Page No. 186, Bd.F 14, Page No.305 / IS 456 (2002). FOURTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and Steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.26, Sr. No. 864, Page No. 186, Bd.F 14, Page No.305 / IS 456 (2002). FIFTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and Steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.26, Sr. No. 864, Page No. 186, Bd.F 14, Page No.305 / IS 456 (2002). SIXTH FLOOR

Providing and fixing in position TMT-Fe 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete, SSR 2022-23 Item No. 26.33, Sr.No.871, Page No. 188, Bd.F.17, Page No. 306. GROUND FLOOR

Providing and fixing in position TMT-Fe 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete, SSR 2022-23 Item No. 26.33, Sr.No.871, Page No. 188, Bd.F.17, Page No. 306. FIRST FLOOR

Providing and fixing in position TMT-Fe 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete, SSR 2022-23 Item No. 26.33, Sr.No.871, Page No. 188, Bd.F.17, Page No. 306. SECOND FLOOR

Providing and fixing in position TMT-Fe 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete, SSR 2022-23 Item No. 26.33, Sr.No.871, Page No. 188, Bd.F.17, Page No. 306. THIRD FLOOR

Providing and fixing in position TMT-Fe 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete, SSR 2022-23 Item No. 26.33, Sr.No.871, Page No. 188, Bd.F.17, Page No. 306. FOURTH FLOOR

Providing and fixing in position TMT-Fe 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete, SSR 2022-23 Item No. 26.33, Sr.No.871, Page No. 188, Bd.F.17, Page No. 306. FIFTH FLOOR

Providing and fixing in position TMT-Fe 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete, SSR 2022-23 Item No. 26.33, Sr.No.871, Page No. 188, Bd.F.17, Page No. 306. SIXTH FLOOR

Providing and fixing in position to the exact profile and prestressing the high tensile strands to specified ultimate strength, standard end anchorages, cable ducts, grouting ducts after prestressing and bearing plates with wedges as per detailed drawings including necessary plant and machinery for prestressing etc. complete. SSR 2022-23 Item No. 14.06, Sr.No.462, Page No. 93, As directed by Engineer-In-Charge. FOURTH FLOOR

Providing and Fixing Mangalore Tile Roofing with class AA Tiles in cement mortar 1:4 on Sloping Slab including necessary scaffolding, curing finishing etc. complete. SSR 2022-23, Item No. 38.33, Sr. No. 1173, Page No. 236, Bd. R3A, Page No. 449.

Providing and fixing Mangalore tile ridge and hip tiles of class 'AA' including scaffolding if necessary, pointing with coloured cement mortar and curing etc. complete. SSR 2022-23, Item No. 38.03, sr. No. 1143, Page No. 233, Bd. R3, Page No. 450.

Providing and fixing in position Gypsum board False Ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. SSR 2022-23, Item No. 38.51, Sr.No. 1191, Page No. 243, As directed by Engfineer-In-Charge.

Providing Fly Ash Brick Masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in Superstructure including striking joints, racking out joints watering and scaffolding etc. complete. SSR 2022-23, Item No. 27.13, Sr.No.900, Page No.198 As director by engineer in charge and BDG-2 and 5. GROUND FLOOR

Providing Fly Ash Brick Masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in Superstructure including striking joints, racking out joints watering and scaffolding etc. complete. SSR 2022-23, Item No. 27.13, Sr.No.900, Page No.198 As director by engineer in charge and BDG-2 and 5. FIRST FLOOR

Providing Fly Ash Brick Masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in Superstructure including striking joints, racking out joints watering and scaffolding etc. complete. SSR 2022-23, Item No. 27.13, Sr.No.900, Page No.198 As director by engineer in charge and BDG-2 and 5. SECOND FLOOR

Providing Fly Ash Brick Masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in Superstructure including striking joints, racking out joints watering and scaffolding etc. complete. SSR 2022-23, Item No. 27.13, Sr.No.900, Page No.198 As director by engineer in charge and BDG-2 and 5. THIRD FLOOR

Providing Fly Ash Brick Masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in Superstructure including striking joints, racking out joints watering and scaffolding etc. complete. SSR 2022-23, Item No. 27.13, Sr.No.900, Page No.198 As director by engineer in charge and BDG-2 and 5. FOURTH FLOOR

Providing Coursed Rubble Masonry First Sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in exterrnal work of Plinth including bailing out water manually, striking joints inside and watering etc. complete. SSR 2022-23, Item No. 28.11, Sr. No. 914,Page No. 200, BdH 13 Page No.333.

Providing Coursed Rubble Masonry First Sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in Superstructure including racking out joints inside when plastering is to be done, watering and scaffolding etc. complete. SSR 2022-23 Item No. 28.12, Sr. No. 915, Page No. 200, BdH 14 Page No.333. GROUND FLOOR

Providing Coarsed Rubble Stone masonry for facing stone wall. 1st sort of trap stone with all four edges fine and well dressed (approx size 0.30 m x 0.15 m x 0.23 m) and trap header having size (0.20 m x 0.15 m x 0.35 m) in Lime mortar 1:3 in superstructure including double cuplock scaffolding and curing and finishing the joints etc complete. Specification : - As directed by Engineer in charge Consider area : - 1.30m x 0.60 m x 1.30 m = 1.014 Cum

Providing Coursed Rubble Stone Masonry for Double side facing Dome shaped Stone Arch Pillar, having (Approximate size 0.75m x 0.30m x 0.90m) having 100mm x 100mm square shaped hole with fine edges in center of the pilar and 300mm above the bottom with dome shaped well finished surface at the top in cement mortar 1:6 in superstructure, including double cuplock scaffolding, curring and finishing the joints etc. comlete. As directed by Engineer-in-Charge.

Providing Ashlar Masonry with Soft Compacted Basalt stone. First Sort like walls, columns, cap stones etc. with dressing as per drawing and as directed by Engineer-In-Charge, in Lime mortar 1:3 with fitting joints (paper), setting with stainless steel dowels, copper pins and fixing with Araldite and hardner etc. including transportation and conveyance to specific required location, scaffolding, tools and tackels, racking the joints with neat lime slurry, curing cleaning etc complete. The stones shall be dressed full or to template, or as shown in working drawings. The exposed faces of the stone shall be fine - chissel dressed, and all joints shall be in line and close not more than 3mm thick. All visible angles and edges to be free from unsightly chippings, etc. complete. As directed by Engineer-In-Charge. (The sample of the moulded stone shall be approved prior to execution by Consultant/Engineer-In-Charge.)

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. SSR 2022-23, Item No. 31.04, Sr.No.940, Page No. 205,BDJ- As directed by Engineer in charge. GROUND FLOOR

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. SSR 2022-23, Item No. 31.04, Sr.No.940, Page No. 205,,BDJ- As directed by Engineer in charge. FIRST FLOOR

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. SSR 2022-23, Item No. 31.04, Sr.No.940, Page No. 205,,BDJ- As directed by Engineer in charge. SECOND FLOOR

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. SSR 2022-23, Item No. 31.04, Sr.No.940, Page No. 205,,BDJ- As directed by Engineer in charge. SIXTH FLOOR

Providing Water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete. SSR 2022-23, Item No. 31.05, Sr. No.941, Page No. 205, As directed by Engineer-In-Charge. GROUND FLOOR

Providing Waterproof Plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete. SSR 2022-23, Item No. 31.07, Sr.No.943, Page No.206, BDJ As directed by Engineer in Charge. GROUND FLOOR

Providing and laying jointless Polydee-LM, a highly flexible elastometric coating for RCC / cementitious surface for Terrace Waterproofing on B.B. Coba / R.C.C, after application of TP- 42 Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of Polydee-LM @ 700 gms/Square Metre and applying 2nd coat of Polydee-LM @ 700 gms/Square Metre and finishing the same with sprinkling the AG-10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms/Square Metre to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete. SSR 2022-23, Item no. 31.10, Sr.No.946, Page No. 206, BDJ- As directed by Engineer in charge. FOURTH FLOOR

Providing and Fixing 20 to 25mm thick Rough Shahabad Box Type Waterproofing for basement or underground floor on a base of cemenrt concrete 1:3:6, including sub base of 2.50 centemeter thick cement mortar 1:3 with conceal secrete (RMW), Algae proof or other alike waterproofing liquids, racking of joints upto 35mm depth, filling the joints with 6mm size crushed metal, hand grouting with cement slurry, curing and cleaning with 7 years guarantee on Court fee stamp paper of Rs.100/- with ponding test etc. complete. (excluding cement concrete 1:3:6 base concrete). SSR 2022-23, Item No. 31.12, Sr. No.948, Page No. 206, BdJ 2 Page No.355.

Providing and Fixing 20 to 25mm thick Rough Shahabad Box Type Waterproofing treatment to Vertical outside faces of reinforced cement concrete walls of basement or underground floor including filling the gap of 25mm between rough shahabad and R.C.C. walls with cement grout mixed with waterproofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with waterproofing liquid for width 30 to 35mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with cement concrete 1:2:4 mixed with waterproofing liquid, curing with 7 years guarantee on Court fee stamp paper of Rs.100/- with ponding test etc. complete. (excluding cement concrete 1:3:6 base concrete). SSR 2022-23, Item No. 31.13, Sr. No.949, Page No.207, BdJ 2 Page No. 355.

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. SSR 2022-23, Item No. 31.26, Sr.No.954, Page No. 208, BDJ- As directed by Engineer in charge. GROUND FLOOR

Providing internal cement plaster 20mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR 2022-23, Item No. 32.07, Sr.No. 961, Page No. 209, Bd. L.4 Page No. 368. GROUND FLOOR

Providing internal cement plaster 20mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR 2022-23, Item No. 32.07, Sr.No. 961, Page No. 209, Bd. L.4 Page No. 368. FIRST FLOOR

Providing internal cement plaster 20mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR 2022-23, Item No. 32.07, Sr.No. 961, Page No. 209, Bd. L.4 Page No. 368. SECOND FLOOR

Providing internal cement plaster 20mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR 2022-23, Item No. 32.07, Sr.No. 961, Page No. 209, Bd. L.4 Page No. 368. THIRD FLOOR

Providing internal cement plaster 20mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR 2022-23, Item No. 32.07, Sr.No. 961, Page No. 209, Bd. L.4 Page No. 368. FOURTH FLOOR

Providing Sand faced plaster Externally in cement mortar using approved screned sand in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound of 1 kg per cement bag curing the same for not less than two days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for forteen days scaffolding etc. complete. SSR 2022-23, Item No. 32.11, Sr.No. 963, Page No. 209, BDL-7, Page No.369. GROUND FLOOR

Providing Sand faced plaster Externally in cement mortar using approved screned sand in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound of 1 kg per cement bag curing the same for not less than two days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for forteen days scaffolding etc. complete. SSR 2022-23, Item No. 32.11, Sr.No. 963, Page No. 209, BDL-7, Page No.369. FIRST FLOOR

Providing Sand faced plaster Externally in cement mortar using approved screned sand in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound of 1 kg per cement bag curing the same for not less than two days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for forteen days scaffolding etc. complete. SSR 2022-23, Item No. 32.11, Sr.No. 963, Page No. 209, BDL-7, Page No.369. SECOND FLOOR

Providing and fixing chicken mesh of 22 gauge, with about 30cm width at the junction of RCC members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete / brick masonry and or tieing by binding wire etc. complete. SSR 2022-23, Item No. 32.26, Sr. No. 977, Page No. 210, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and fixing chicken mesh of 22 gauge, with about 30cm width at the junction of RCC members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete / brick masonry and or tieing by binding wire etc. complete. SSR 2022-23, Item No. 32.26, Sr. No. 977, Page No. 210, As directed by Engineer-In-Charge. FIRST FLOOR

Providing and applying Gypsum Plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. SSR 2022-23, Item No. 32.31, Sr. No. 982, Page No. 211, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and applying Gypsum Plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. SSR 2022-23, Item No. 32.31, Sr. No. 982, Page No. 211, As directed by Engineer-In-Charge. FIRST FLOOR

Providing and applying Gypsum Plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. SSR 2022-23, Item No. 32.31, Sr. No. 982, Page No. 211, As directed by Engineer-In-Charge. SECOND FLOOR

Providing and applying Gypsum Plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. SSR 2022-23, Item No. 32.31, Sr. No. 982, Page No. 211, As directed by Engineer-In-Charge. THIRD FLOOR

Providing and applying Gypsum Plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. SSR 2022-23, Item No. 32.31, Sr. No. 982, Page No. 211, As directed by Engineer-In-Charge. FOURTH FLOOR

Providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make.etc Complete, SSR 2022-23, Item No. 32.34, Sr.No. 985, Page No. 212, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make.etc Complete, SSR 2022-23, Item No. 32.34, Sr.No. 985, Page No. 212, As directed by Engineer-In-Charge. FIRST FLOOR

Providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make.etc Complete, SSR 2022-23, Item No. 32.34, Sr.No. 985, Page No. 212, Asdirected by Engineer-In-Charge. SECOND FLOOR

Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete. SSR 2022-23, Item No. 32.32, Sr.No. 983, Page No. 211, As directed by Engineer-In-Charge.

Providing and laying in position Flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown Granite Stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. SSR 2022-23, Item No. 33.34, Sr. No. 1021, Page No.216, Bd.M 3B Page No. 380. GROUND FLOOR

Providing and laying in position Flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown Granite Stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. SSR 2022-23, Item No. 33.34, Sr. No. 1021, Page No.216, Sr. No. 1021, Page No.216, Bd.M 3B Page No. 380. FIRST FLOOR

Providing and laying in position Flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown Granite Stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. SSR 2022-23, Item No. 33.34, Sr. No. 1021, Page No.216, Bd.M 3B Page No. 380. SECOND FLOOR

Providing and laying in position Flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown Granite Stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. SSR 2022-23, Item No. 33.34, Sr. No. 1021, Page No.216, Bd.M 3B Page No. 380. THIRD FLOOR

Providing and laying in position Flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown Granite Stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. SSR 2022-23, Item No. 33.34, Sr. No. 1021, Page No.216, Bd.M 3B Page No. 380. FOURTH FLOOR

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown Granite Stone for Treads and Risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. SSR 2022-23, Item No. 33.35, Sr. No. 1022, Page No. 216, Bd.M 22B Page No. 390. GROUND FLOOR

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown Granite Stone for Treads and Risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. SSR 2022-23, Item No. 33.35, Sr. No. 1022, Page No. 216, Bd.M 22B Page No. 390. FIRST FLOOR

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown Granite Stone for Treads and Risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. SSR 2022-23, Item No. 33.35, Sr. No. 1022, Page No. 216, Bd.M 22B Page No. 390. SECOND FLOOR

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown Granite Stone for Treads and Risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. SSR 2022-23, Item No. 33.35, Sr. No. 1022, Page No. 216, Bd.M 22B Page No. 390. THIRD FLOOR

Providing and fixing machine cut mirror polished 18mm to 20mm thick Telephone black granite / Amba white / Cat bary brown / RBI red / Ocean brown Granite Stone Partitions with full moulding the edges etc. complete. Both side polish. SSR 2022-23 Item No.33.36, Sr. No. 1023, Page No. 216, Bd M35 B, Page No. 393. GROUND FLOOR

Providing and laying Vitrified mirror / Glossy finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Dado and Skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.41, Sr.No. 1028, Page No.217, Bd. M-12 page Number 385. GROUND FLOOR

Providing and laying Vitrified Matt finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.42, Sr.No. 1029, Page No.217, Bd. M-12 page Number 385. GROUND FLOOR

Providing and laying Vitrified Rustic Matt Stone finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.44, Sr.No. 1031, Page No.217, Bd. M-12 page Number 385. GROUND FLOOR

Providing and laying Vitrified Stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete SSR 2022-23, Item No. 33.46, Sr.No. 1033, Page No.218, Bd. M-12 page Number 385. GROUND FLOOR

Providing and laying Vitrified Stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete SSR 2022-23, Item No. 33.46, Sr.No. 1033, Page No.218, Bd. M-12 page Number 385. FIRST FLOOR

Providing and laying Vitrified Stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for Skirting in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete SSR 2022-23, Item No. 33.47, Sr.No. 1033, Page No.218, Bd. M-12 page Number 385. GROUND FLOOR

Providing and laying Vitrified Stone effect finish tiles having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for Skirting in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete SSR 2022-23, Item No. 33.47, Sr.No. 1033, Page No.218, Bd. M-12 page Number 385. FIRST FLOOR

Providing Leather Finished Polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete. SSR 2022-23, Item No. 33.56, Sr. No. 1043, Page No. 219, As directed by Engineer-In-Charge. GROUND FLOOR

Providing Leather Finished Polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete. SSR 2022-23, Item No. 33.56, Sr. No. 1043, Page No. 219, As directed by Engineer-In-Charge. FIRST FLOOR

Providing Leather Finished Polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete. SSR 2022-23, Item No. 33.56, Sr. No. 1043, Page No. 219, As directed by Engineer-In-Charge. SECOND FLOOR

Providing Leather Finished Polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete. SSR 2022-23, Item No. 33.56, Sr. No. 1043, Page No. 219, As directed by Engineer-In-Charge. THIRD FLOOR

Providing and laying Telephone black / Amba white / Cadbury brown / Ruby red / Ocean brown Granite Stone of 18mm to 20mm thickness for Door Frame / Dado / Window boxing etc. on CM 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing etc. complete. SSR 202-23, Item No. 33.68, Sr. No. 1052, Page No. 220, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and fixing soft compacted basalt stone of size 300mm x 450mm x 150mm thick for Paving/Flooring with dressing as per drawing and as directed by Engineer-In-charge. The stones to be finely flat, chisel dressed on the surface, without windings, and the joints running true and parallel from side to side. The stones to be laid with joints not exceeding 3mm thick and and to be evenly and firmly bedded flush in mortar on the existing concrete, and no hollows left. Courses to be parallel and at reight angles to the wall, and the stone shall be laid with break joint at least 150mm or as directed by Engineer-In-Charge, including lime mortar bed of 20mm thickess in lime mortar 1:3 with filling joints, curing, cleaning, etc. complete. etc. complete. As directed by Engineer-In-Charge. (The sample of the moulded Paving stone shall be approved prior to execution by Consultant/Engineer-In-Charge.)

Providing and fixing Rolling Shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear) SSR 2022-23, Item No. 39.25, Sr. No. 1218, Page No. 249, Bd.T-55, Page No. 510.

Providing and fixing in position powder coated Aluminium Louvered Windows / Ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. SSR 2022-23, Item No. 39.68, Sr. No. 1263, Page No.259, As directed by Engineer-In-Charge. GROUND FLOOR

Sliding Window- 3 Track (2 Glass shutter + 1 flymesh) of approved make with DGU, providing and fixing of Sliding Window- 3 Track (2 Glass shutter + 1 flymesh ). For details refer to Specifications. As directed by Engineer in charge. SSR - 2022-23, Item No. 48.23, Sr.No. 1641, Page No.314, As directed by Engineer-In-Charge.

Providing and fixing of Metal Door, door frame shall be single rebate profile of size 125mm x 57mm made out of 1.6mm (16gauge) mimimum thick galvanised steel sheet, Frames shall be mitre joints and Double leaf door shall be 46.6mm thick fully flush with infill of resin bonded honeycomb kraft, door leaf shall be of 1.2mm (18 gauge) minimum thick galvanized steel sheet with provision for louvers inbuilt as per drawing / with vision panel to be provided with 6mm glass, beeding and screws from inside. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening.All doors shall be factory prepared for receiving appropriate hardwares and provided with necessary reinforcement for hinges, locks, handle and door closure, colour of door frame and shutter shall be of approved colour, etc complete. As directed by Engineer-In-Charge.

Providing and fixing of metal door,door frame shall be single rebate profile of size 125mm X 57mm made out of 1.6mm(16gauge) mimimum thick galvanised steel sheet,frames shall be mitre joints and Single leaf door shall be 46.6mm thick fully flush with infill of resin bonded honeycomb kraft,door leaf shall be of 1.2mm (18 gauge)minimum thick galvanized steel sheet with provision for louvers inbuilt as per drawing / with vision panel to be provided with 6mm glass, beeding and screws from inside. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening .All doors shall be factory prepared for receiving appropriate hardwares and provided with necessary reinforcement for hinges,locks,handle and door closure,colour of door frame and shutter shall be of approved colour, etc complete. As directed by Engineer-In-Charge.

Providing & Fixing in position Acoustical Door along with Frame of 150mm X 100mm, Shutters shall be made from Teak wood frame for door leaf of 125 mm X 100 mm section, at 600 x 600 C/C, filled with 50 mm thick and 48 kg/sqm density of Glasswool, 18 mm waterproof ply from both side, finished with approved Veneer of 3mm, from inside and outside, including 150 mm heavy duty SS hinges 4 no each shutter, including cost of required Cut-Outs, melamine polish from both side of the door with necessary Scaffolding, etc. Doors shall have handles of approved design of size 450mm length, Tower bolts & Locking arrangements as directed. as per Architectural and Acoustical Design and Instructions and Complete. As directed by Engineer-In-Charge.

Providing and Fixing Burma Teak Wood Frame with / without ventilator of size as specified for Doors and Windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm including one coat of primer and two coats of oil paint for wood, As directed by Engineer-In-Charge etc. complete.

Providing and Fixing new 40mm thick Burma Teak Wood Glazed Window Shutters with 1/2" beading trellies design on the 5mm glass panes with panels 40mm thick with / without ventilator, including, fixtures, fastenings and finishing the wood work with 2 coats of primer and melamine polish, all necesary fittings to be fixed at the location, all inclusive as directed by Engineer-In-Charge etc. complete.

Providing and Fixing Burma Teak Wood Solid 40mm thick Fully Panelled Door Shutter without frames in Single or Double leaf 40mm thick panel as per detailed drawings with wrought iron hold fast, brass fixtures and fastenings and handles on both sides and finishing with two coats of primer and melamine polish, all the necessary fitings to be fixed at the specified location, all inclusive as directed by Engineer-In-Charge etc. complete.

Providing and fixing steel frame for door of size 5.0m wide x 6.83m ht two leaf openable Door fabricated and made out of MS steel box section of rectangular hollow section (RHS) of size 200mm x 100mm x 4.00mm thk. For main door shutter frame work as per drawing with MS Box section of square of hollow section (SHS) of size 100mm x 100mm x 4mm thk for cross Member of shutter frame with top and bottom heavy duty pivot hinges welded to main door shutter frame as per Drawing and door shutter cladded with Burma Teakwood planks of size 200mm x 25mm thick placing in vertical direction from top to bottom and placing side by side from both side of shutter and with 25mm teakwood plank on all remaining edges of the bot shutters and separate Burma Teakwood Members of size 250mm x 75mm fixing on front side of each shutter as per detail elevation Drawing including same size cureved member as per elevation matching with stone arch of civil construction and fixing decorative iron door nobs as per design on the elevation frame ae well as the door shutter central top portion of smaller size door nobs and spikes fixed on MS steel plate fixed to main door shutter of size 150mm wide x 5mm thick horizontally only on front side of both door shutters. Fabrication of main shutter frame is to be fabricated with RHS profile cutting and right angle joint to be fabricated with 45° angle cutting and welding all members without any opening exposing inner surface of box Member. Including melamine polishing all wooden surfaces. Item including all materials, labour, transportation, scaffolding, Erection, with all necessary tools on with all leads and lifts etc. Complete. Item Code-DFD1-

Providing and fixing Mild Steel Grill Railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish. SSR 2022-23, Item No. 40.03, Sr. No. 1293, Page No. 264, Bd.U 1, Page No. 537. GROUND FLOOR

Providing and fixing Mild Steel Grill Railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish. SSR 2022-23, Item No. 40.03, Sr. No. 1293, Page No. 264, Bd.U 1, Page No. 537. FIRST FLOOR

Providing and fixing Mild Steel Grill Railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish. SSR 2022-23, Item No. 40.03, Sr. No. 1293, Page No. 264, Bd.U 1, Page No. 537. SECOND FLOOR

Providing and fixing Mild Steel Grill Railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish. SSR 2022-23, Item No. 40.03, Sr. No. 1293, Page No. 264, Bd.U 1, Page No. 537. THIRD FLOOR

Providing and fixing Mild Steel Grill Railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish. SSR 2022-23, Item No. 40.03, Sr. No. 1293, Page No. 264, Bd.U 1, Page No. 537. FOURTH FLOOR

Providing and fixing Mild Steel Grill Railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish. SSR 2022-23, Item No. 40.03, Sr. No. 1293, Page No. 264, Bd.U 1, Page No. 537. FIFTH FLOOR

Providing and fixing Mild Steel Grill Railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish. SSR 2022-23, Item No. 40.03, Sr. No. 1293, Page No. 264, Bd.U 1, Page No. 537. SIXTH FLOOR

Providing and Fixing Railing of Cast Iron Balustrade (0.30m wide x 0.80m in height) using wooden handrails as per drawing and design suitable to the Historic Structure, using atleast 10kg per Balustrade with First Sort Burma Teak Wood Hand Rails to be carved in minimum 80mm x 80mm section to be fixed at the location using necessary joinery, inclusive of French Polish application to wooden hand rails, etc. all complete. As directed by Engineer-In-Charge.

Providing and applying two coats of Exterior Weather Shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat,scaffolding if necessary, and watering the surface for two days etc complete.(With prior approval of S.E.) SSR - 2022-23, Item No. 35.26, Sr.No.1095,Page No.225,BDO As directed by Engineer Incharge. GROUND FLOOR

Providing and applying two coats of Exterior Weather Shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat,scaffolding if necessary, and watering the surface for two days etc complete.(With prior approval of S.E.) SSR - 2022-23, Item No. 35.26, Sr.No.1095,Page No.225,BDO As directed by Engineer Incharge. FIRST FLOOR

Providing and applying 2 coats of 100% Pure Acrylic low VOC and APEO & HCHO free water based Paint of approved colour that belongs to class 1 flame spread resistance of approved make Paint should provide durable and long lasting silk finish with a high crack tolerance of upto 1mm. Paint should have an oustanding washability with high resistance to wide range of bacteria and fungus. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC Primer. The work activity should cover all aspects of applying paints from surface preparation as directed by Engineer in charge. SSR-2022-23, Item No. 48.11, Sr. No. 1630, Page No. 311, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and applying two coats of High Albedo Paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively, VOC less than 10 cc/gm. The coating thickness and the methodology of application shall strctly as per manufacturer's specifitions and as approved by engineer in charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc, washing with water all complete.The contractor shall give guarantee for the performance of SRI and also the durabitity of coating, all complete as per direction of Engineer - in- incharge. SSR - 2022-23, Item No. 48.19, Sr. No. 1637, Page No. 313, As directed by Engineer-In-Charge.

Providing and applying 2 coats of 100% Pure Acrylic low VOC and APEO & HCHO free water based Paint of approved colour that belongs to class 1 flame spread resistance of approved make Paint should provide durable and long lasting silk finish with a high crack tolerance of upto 1mm. Paint should have an oustanding washability with high resistance to wide range of bacteria and fungus. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC Primer. The work activity should cover all aspects of applying paints from surface preparation as directed by Engineer in charge. SSR-2022-23, Item No. 48.11, Sr. No. 1630, Page No. 311, As directed by Engineer-In-Charge. FIRST FLOOR

Providing and applying 2 coats of 100% Pure Acrylic low VOC and APEO & HCHO free water based Paint of approved colour that belongs to class 1 flame spread resistance of approved make Paint should provide durable and long lasting silk finish with a high crack tolerance of upto 1mm. Paint should have an oustanding washability with high resistance to wide range of bacteria and fungus. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC Primer. The work activity should cover all aspects of applying paints from surface preparation as directed by Engineer in charge. SSR-2022-23, Item No. 48.11, Sr. No. 1630, Page No. 311, As directed by Engineer-In-Charge. SECOND FLOOR

Providing and applying 2 coats of 100% Pure Acrylic low VOC and APEO & HCHO free water based Paint of approved colour that belongs to class 1 flame spread resistance of approved make Paint should provide durable and long lasting silk finish with a high crack tolerance of upto 1mm. Paint should have an oustanding washability with high resistance to wide range of bacteria and fungus. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC Primer. The work activity should cover all aspects of applying paints from surface preparation as directed by Engineer in charge. SSR-2022-23, Item No. 48.11, Sr. No. 1630, Page No. 311, As directed by Engineer-In-Charge. THIRD FLOOR

Providing and applying 2 coats of 100% Pure Acrylic low VOC and APEO & HCHO free water based Paint of approved colour that belongs to class 1 flame spread resistance of approved make Paint should provide durable and long lasting silk finish with a high crack tolerance of upto 1mm. Paint should have an oustanding washability with high resistance to wide range of bacteria and fungus. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC Primer. The work activity should cover all aspects of applying paints from surface preparation as directed by Engineer in charge. SSR-2022-23, Item No. 48.11, Sr. No. 1630, Page No. 311, As directed by Engineer-In-Charge. FOURTH FLOOR

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. SSR 2022-23, Item No. 35.24, Sr. No. 1093, Page No.225, As directyed by Engineer-In-Charge.

Providing Ashlar Masonry for Chatri upto 3.5m Dia or dimensions as per design and drawing As directed by Engineer-In-Charge with Soft Compacted Basalt stone. with dressing as per drawing , and as directed by Engineer-In-Charge, all fixing in Lime mortar 1:2 with fitting joints (paper) including transportation and conveyance to specific required location, scaffolding, tools and tackels, racking the joints with neat Lime slurry, and or grout, curing, cleaning etc complete. The stones shall be dressed full or to template, or as shown in working drawings. The exposed faces of the stone shall be fine - chissel dressed, and all joints shall be in line and close not more than 3mm thick. All visible angles and edges to be free from unsightly chippings, etc. complete. As directed by Engineer-In-Charge. (The sample of the moulding stone shall be approved prior to execution by Consultant/Engineer-In-Charge.)

Providing Ashlar Masonry for Mahirap Arch Moulding with Soft Compacted Basalt stone of size 300mm x 300mm x 300mm from approved source, with dressing as per drawing and as directed by Engineer-In-Charge in Lime Mortar 1:3 with paper fitting joints, including transportation and conveyance to specific required location, scaffolding, tools and tackles, racking the joints with neat Lime slurry, curing, cleaning, etc. complete. The stones shall be dressed full or to template, or as shown in working drawings. The exposed faces of the stone shall be fine - chissel dressed, and all joints shall be in line and close not more than 3mm thick. All visible angles and edges to be free from unsightly chippings, etc. complete. As directed by Engineer-In-Charge. (The sample of the moulding stone shall be approved prior to execution by Consultant/Engineer-In-Charge.)

Providing and fixing soft compacted basalt stone of size 600L x470 D x 300 H mm size from approved source, for Carved Flower design (750mm x 750mm) at 6.85 m level embeded in Ashlar masonry, with dressing as per drawing and as directed by Engineer-In-Charge in Lime mortar 1:3 with fitting joints ( paper) including transportation and conveyance to specific required location, scaffolding, tools tackels racking the joints with neat cement slurry, curing cleaning varnishing etc complete. (The sample of the Mural stone shall be approved prior to execution by Consultant/Engineer-In-Charge.) As directed by Engineer-In-Charge.

Providing and fixing soft compacted basalt stone of size 600L x470 D x 300 Hmm size from approved source, for Carved Horse and Elephant Mural design (770mm x 880mm) at 8.35 m level embeded in Ashlar masonry, with dressing as per drawing and as directed by Engineer-In-Charge in Lime mortar 1:3 with fitting joints ( paper) including transportation and conveyance to specific required location, scaffolding, tools tackels racking the joints with neat cement slurry, curing cleaning varnishing etc complete. (The sample of the Mural stone shall be approved prior to execution by Consultant/Engineer-In-Charge.) As directed by Engineer-In-Charge.

Providing Ashlar Masonry for 2.50m Level Moulding with Soft Compacted Basalt stone of size 300mm x 250mm x 300mm from approved source, with dressing as per drawing and as directed by Engineer-In-Charge in Lime Mortar 1:3 with paper fitting joints, including transportation and conveyance to specific required location, scaffolding, tools and tackles, racking the joints with neat Lime slurry, curing, cleaning, etc. complete. The stones shall be dressed full or to template, or as shown in working drawings. The exposed faces of the stone shall be fine - chissel dressed, and all joints shall be in line and close not more than 3mm thick. All visible angles and edges to be free from unsightly chippings, etc. complete. As directed by Engineer-In-Charge. (The sample of the moulding stone shall be approved prior to execution by Consultant/Engineer-In-Charge.)

Providing Ashlar Masonry for 2.50m Level Moulding with Soft Compacted Basalt stone of size 300mm x 250mm x 150mm from approved source, with dressing as per drawing and as directed by Engineer-In-Charge in Lime Mortar 1:3 with paper fitting joints, including transportation and conveyance to specific required location, scaffolding, tools and tackles, racking the joints with neat lime slurry, curing, cleaning, etc. complete. The stones shall be dressed full or to template, or as shown in working drawings. The exposed faces of the stone shall be fine - chissel dressed, and all joints shall be in line and close not more than 3mm thick. All visible angles and edges to be free from unsightly chippings, etc. complete. As directed by Engineer-In-Charge. (The sample of the moulding stone shall be approved prior to execution by Consultant/Engineer-In-Charge.)

Providing Ashlar Masonry for Stone Moulding at 17.70meter. Ht. with Soft Compacted Basalt stone. Size-200mm (W) x 150mm (Ht.) x 450mm (L) with dressing as per drawing, and as directed by Engineer-In-Charge, in lime mortar 1:3 with fitting joints ( paper) including transportation and conveyance to specific required location, scaffolding, tools and tackels, racking the joints with neat lime slurry, curing, cleaning etc complete. The stones shall be dressed full or to template, or as shown in working drawings. The exposed faces of the stone shall be fine - chissel dressed, and all joints shall be in line and close not more than 3mm thick. All visible angles and edges to be free from unsightly chippings, etc. complete. As directed by Engineer-In-Charge. (The sample of the moulding stone shall be approved prior to execution by Consultant/Engineer-In-Charge.)For Building No. 41-SSB. Item Code-SM25

Specialized stone cleaning work Removing Loose, Porus, cemente / lime pointing, Clean all loose dust particles with help of compressed air , care is to be taken that the air pressure is monitored, stone cleaning work to remove oil, cementacious material, paint, stains, dark patches due to weathering from stone surface with using paper pulp, chemical, thinners, solvents, or soft teepol soap, type solution, with help of pressure jetting machine, etc complete and as directed by Engineer Incharge. (Exernal Face )

Designing, Manufacturing as per drawing, Supplying and Installing in position, GFRC column (wada) Top Bracket TYPE A (front) Specifications : GFRC- Compressive strength - 80 MPA, Flexural strength (MOR) - 18 MPA, Flexural LOP - 8 MPA , Wherever required GFRC with stud frame and flex anchors to be adopted for cornices or similar components. Mild steel if used should be passivated and with epoxy primer and PU coating. Exposed steel brackets/cleats/hardware should be hot dip galvanized (HDG). Fasteners- plated from HILTI/KLIMAS/FISCHER or equivalent. The price shall include preparation of shop drawings, manufacturing, transport, unloading and installation completed in all respects including scaffolding upto 3 storeys or 12 m height if required. As directed by Engineer-In-Charge. Dimension - 300mm x 300mm

PRECAST CONCRETE / GFRC Designing, Manufacturing as per drawing, Supplying and Installing in position, Architectural Precast Concrete Meghdambri for Compound Wall (MD1) with smooth finish. Specifications : Precast concrete with compressive strength 80 MPA and HDG exposed fixing cleats and fasteners- plated from HILTI/KLIMAS/FISCHER or equivalent, Inserts if embedded in GFRC / Precast concrete would be SS 316 plated. Dimension - 0.90m x 0.90m x 1.725m

Cutting down trees including trunks and branches with girths above 60cm to 90cm and stacking the materials neatly with all lifts and lead of 1000m. as directed and earth filling in the depression/pit if any. SSR 2022-23 Item No. 2.02, Sr.No.79, Page No.23, MORTH 201.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. SSR 2022-23 Item No. 2.09, Sr.No.85, Page No.23, MORTH 201.

Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ) SSR 2022-23 Item No. 11.02, Sr.No.377, Page No.81, CD-3, Page No. 160..

Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 5.0 to 9.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary) SSR 2022-23 Item No. 12.23, Sr.No.417, Page No.86, BR-4, Page No. 104,105..

Providing and laying in situ / ready mix M-25 plain cement concrete of trap/granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of "V" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/steel form work centering ( excluding dewatering by means of pump) and including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by engineer in charge basic rate shall be increased for height above 5..00 m in followinh manners ) Height upto 5 M. (With Batch Mix Plant)With fully automatic micro processor based PLC with SCADA enable with fine agreegates of required specifications ( VSI sand finely washed etc )i) Height up to 5 m, normal rate.ii) Height 5 to 7.50 m, add 5 percent extra over basic rate.iii) Height 7.50 to 10 m, 7.50 percent extra.iv) Over 10 m Height, add 10 percent extra for every 2.50m rise. SSR 2022-23 Item No. 17.44, Sr.No.652, Page No.135, MORTH (5th Rev), 1700,2204.

Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.11, Sr.No.836, Page No.178, Bd.F 3 Page No. 298, and B-7, Page No.38.

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.17, Sr.No.860, Page No.185, Bd.F 11 Page No. 304, and B-7, Page No.38.

Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (225 Kilogram) SSR 2022-23 Item No. 42.68, Sr.No.1439, Page No.281, As directed by Engineer-In-Charge..

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.13, Sr.No.837, Page No.178, Bd.F 11 Page No. 304, and B-7, Page No.38. Bd.F.3 Page One Number 298 and B.7, Page One Number38

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks compacting and finishing roughning if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) , SSR 2022-23 Item No. 25.33, Sr.No. 843, Page No. 180 Bd.F.5 Page No. 300 and B- 7,Page No 38.

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.52, Sr.No. 847, Page No. 181 Bd.F.5 Page No. 300 and B- 7,Page No 38.

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.72, Sr.No. 852, Page No. 182 Bd.F.5 Page No. 300 and B- 7,Page No 38.

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.19, Sr.No. 861, Page No. 185 Bd.F.5 Page No. 300 and B- 7,Page No 38.

Providing and fixing in position Guard Railing as per Drg. No. 15 Type C dt. 20-4-79, with 3 rows of 50mm dia. G.I. pipe 30cm a part and fixed in M.S. channels of section 125 x 65 x 6 mm spaced 2.5 C/c 1:2:4 c.c. bedding of size 45 x 30cm. as per detailed drawing, with 3 coats of approved yellow and black paint including necessary excavation in any strata. SSR 2022-23 Item No. 7.07, Sr.No. 313, Page No. 70

Providing and Constructing gabion structure 0.50 Meter high or required section made up of soft mechanically woven hexagonal shaped G.I. wire confirming to IS 16014:2012 having zinc plus PVC coating of overall diameter of 3.7 mm and tying lacing wire of 3.2 mm with edge wire confirming to overall diameter 4.4 mm edges being mechanically selvedge including placing in position, fitting neatly with trap stone rubble (15 to 23 cm) all loose ends to be securely tied (Excluding transportation) etc. complete.( In Dry condition and for under water installation extra cost to be considered) 2022-23 Item No. 7.22, Sr.No. 328, Page No. 72morth 2503

Providing and laying in situ / ready mix M-30 plain cement concrete of trap /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of "V" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/steel form work centering ( excluding dewatering by means of pump) and including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by engineer in charge basic rate shall be increased for height above 5..00 m in followinh manners b) Height upto 5 M. (With Batch Mix Plant)With fully automatic micro processor based PLC with SCADA enable with fineagreegates of required specifications ( VSI sand finely washed etc )i) Height up to 5 m, normal rate.ii) Height 5 to 7.50 m, add 5 percent extra over basic rate.iii) Height 7.50 to 10 m, 7.50 percent extra. SSR 2022-23 Item No. 17.45, Sr.No. 633, Page No. 136

Providing and laying in situ / ready mix M-30 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer and fine agreegates of required specifications ( VSI sand finely washed etc ) i) Height up to 5 m, normal rate. 14.17

Providing and laying weep holes of 100 mm dia. AC /PVC Pipes as per drawing for abutment returns, return wallls etc complete. SSR Item No-17.37

Excavation for Roadway in Earth, Soil of all sorts, sand, gravel or soft murum including dressing section to the required grade camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 m and spreading for embankment or stacking as directed. SSR 2022-23 Item No. 2.11, Sr.No.87, Page No.23, MORTH 301.

Excavation for Roadway in Hard Murum and boulder including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 m and spreading for embankment or stacking as directed. SSR 2022-23 Item No. 2.13, Sr.No. 88, Page No. 24, MORTH 301.

Excavation for Roadway in Soft Rock including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 m and spreading or stacking as directed. SSR 2022-23 Item No. 2.14, Sr. No. 89, Page No. 24, MORTH 301.

Excavation for Roadway in Hard Rock by wedging and chiselling or line drilling including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 m and spreading for embankment or stacking as directed. SSR 2022-23 Item No. 2.16, Sr. No. 91, Page No. 24, MORTH 301.

Conveying materials obtained from road cutting including all lifts, laying in layers of 20 cm. to 30 cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of over 50 m to 300 m. inclusive from the site of excavation to the site of deposition as directed. SSR 2022-23 Item No. 2.25, Sr. No. 99, page No. 24, MORTH 305.

Conveying materials obtained from road cutting including all lifts, laying in layers of 20 cm. to 30 cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of over 300 m to 500 m. inclusive from the site of excavation to the site of deposition as directed. SSR 2022-23 Item No. 2.26, Sr. No. 99, Page No. 25, MORTH 305.

Providing earth work in Embankment with approved materials obtained from other sources, including all lead and lifts, laying in layers of 20 centimetre to 30 centimetre thickness breaking clods, dressing to the required lines, curves, grades and section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97% of standard proctor density etc. complete (Material obtained from Other sources). SSR 2022-23 Item No. 2.28, Sr. No. 101, Page No. 25, MORTH 305.

Transportion 5Km of excavated material from Site. SSR 2022-23, Statement C1 (with machine loading) Page No. 559.

Construction of granular sub-base by Plant Mix Method by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with Motor Grader/ Paver on prepared surface and compacting with vibratory power roller to achieve the desired density complete as per clause 401. Plant Mix Method and Grading II Material. SSR 2022-23 Item No. 3.02, Sr.No. 114, Page No. 27, MORTH-401.

Wet Mix Macadam - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base /base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver. SSR 2022-23, Item No. 3.23, Sr.No.133, Page No.30, MORTH-406.

Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395:1997 below concrete pavement including all materials and labour complete. SSR 2022-23, Item No. 5.19, Sr. No. 187, Page No.44, MORTH-602.5

Providing and laying Concrete Pipe of I.S.NP. class of 300 mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. SSR 2022-23, Item No. 42.09, Sr.No. 1380, Page No.274, Bd.V, Page No. 573.

Providing and laying cement Concrete Pipe of I.S. 458:2003 Non Pressure-2 class of 450 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete. SSR 2022-23, Item No. 11.08, Sr. No. 384, Page No.81, CD 7, Page No. 162.

Providing and laying in situ/ ready mix M-20 RCC of trap metal for RCC work of ballast walls and Kerbs and box returns including scaffolding, compaction, formwork finishing and curing etc. complete, excluding reinforcement, with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant/ pan mixer and fine agreegates of required specifications (VSI sand finely washed etc.) SSR 2022-23, Item No. 14.44 a, Sr. No. 476, Page No.96, BR 50, Page No. 143 and B7, Page No.38.

Providing and laying Cement Concrete Pipe of I.S. 458:2003 Non Pressure-3 class of 600 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete. SSR 2022-23, Item No. 11.14, Sr. No.390, Page No. 82, CD 7, Page no.162.

Providing and laying Cement Concrete Pipe of I.S. 458:2003 Non Pressure-3 class of 900 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete. SSR 2022-23, Item No. 11.16, Sr. No.392, Page No. 82, CD 7, Page No. 162.

Providing and laying cement concrete pipe of I.S. 458:2003 Non Pressure-3 class of 1200 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete. SSR-2022-23, Item No. 11.18, Sr. No.394, Page No.82, CD-7 Page No.162.

Providing and laying in situ/ ready mix M-20 controlled reinforced cement concrete of trap metal for Raft slab including "V" haunches, formwork, scaffolding, compaction by vibrating, finishing curing etc. complete, RCC Grade with concrete Batch mix plant (Pan mixer) etc. complete. with fine agreegates of required specifications (VSI sand finely washed etc.) SSR 2022-23, Item No. 17.32, Sr. No. 620, Page No. 131, MORT&H (5th Rev.) 1700,2304.

Providing and laying Cast in situ/ Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. Pardi of required thickness including centering, formwork, cover blocks, laying/ pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). SSR 2022-23, Item No. 26.17, Sr. No. 860, Page No. 185, Bd F-11, Page No. 304 and B7, Page No. 38.

Providing and laying of hot applied thermoplastic compound 2.50 milimetre thick including reflectorizing glass beads at 250 grams per square metre area, thickness of 2.50 milimetre is exclusive of surface applied glass beads as per Indian Road Congress:35. The finished surface to be level, uniform and free from streaks and holes complete. SSR-2022-23, Item No. 6.12 a, Sr.No.215, PageNo. 48, MORTH-803.4.

Providing and Constructing gabion structure 1 Meter high or required section made up of soft mechanically woven hexagonal shaped G.I. wire confirming to IS 16014:2012 having zinc plus PVC coating of overall diameter of 3.7 mm and tying lacing wire of 3.2 mm with edge wire confirming to overall diameter 4.4 mm edges being mechanically selvedge including placing in position, fitting neatly with trap stone rubble (15 to 23 cm) all loose ends to be securely tied (Excluding transportation) etc. complete. ( In Dry condition and for under water installation extra cost to be considered) SSR 2022-23, Item No. 7.21, Sr. No. 327, Page No. 72, MORTH 2503.

Providing and laying in situ Cement Concrete M-30 with Tremix Treatment for 200 milimetre thickness for Concrete Road including laying plastic sheet of 125 micron with groove cutting of 4 milimetre wide and 20 milimetre deep, with necessary refilling with Refilling with Polysulfide Sealent (pouring Grade) conforming to BS:5212-1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing polyethylene foam backer road of required diameter (excluding reinforcement) with course and fine agreegates using VSI quality artificial sand etc. complete. SSR 2022-23, Item No. 5.22b, Sr. No. 191, Page No. 45, MORTH 602.

Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts, complete.SSR 2022-23, Item No. 46.09,BDW-8

Dismantling the R.C.C. work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed.SSR 2022-23, Item No. 46.29,BDW-8

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts, completeSSR 2022-23, Item No. 46.29,BDW-8

Removing ventilators and small windows with frame and stacking the materials with all leads lifts, complete.SSR 2022-23, Item No. 46.16, BDW-8

Dismantling stone masonry in lime or cement mortar including stacking the materials as directed with all leads, lifts complete.SSR 2022-23, Item No. 46.11 ,BDW-8

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts, complete. SSR 2022-23, Item No. 46.19 ,BDW-8

Removal of plants/ ficus grown by pulling out root system embedded in masnory, cutting stem and application of high/ gur/ lime formulation as specified by the Architect or other patented chemical biocide treatment such as biocide 'Glycel' (iso proplamine salt of glyphosate) or other chemical as specified by the Engineer in charge etc. complete.SSR 2022-23, Item No. 46.58 ,BDW

Providing and fixing Oval Type Under Counter Wash Ivory Wash Basin of 420 x 590 x 195 mm size with pillar cock, C.P. Angulars top cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the out side face of the wall, having Telephonic Black/Colour Granite of 180 mm thick fixed on Black Kadappa Frame work, etc. Complete as directed by Engineer in charge.

Providing and fixing Table top Ivory wash basin of size 120 x 635 x 405 mm rubber plugs and brass chain, with pillar cock, C.P. Angular stop cock long thread, continental including S.S. bottle trap of approved make having necessary pipe connection up to the out side face of the wall. etc. complete as directed by Engineerin charge.

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.75 m x 1.20 m and height is 0.75 m)

Providing and fixing Orissa Pan Ivory Colour of size 580 x 445 x 260 mm with approved make flush valve including trap, C.I. soil and vent pipe upto outside face of wall including 100mm dia. C.I. plug, bend and necessary pipe connection, etc complete. As directed by Engineer in charge.

WC- Providing and fixing Ivory Colour Opal series European type wall -hung, of size 400 mm x 370 mm x 575 mm with approved make flush valve including soil pipe, vent pipe up to outside face of wall, 100 mm dia C.I. plug bend inlet pipe all fittings, cutting & making good walls, floors etc as directed by Engineer in charge.

Providing and fixing Ivory Colour glazed urinal of size 710 x 460 x 300 mm with sensotronic concealed type flushing valve for urinal with complete kit having fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm dia meter P.V.C. flush pipe with fitting and flushing arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc complete.

Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets / union nut etc. complete as directed by Engineer in charge.

Providing and fixing divertor with overhead shower,shower arm,spout,hand shower with wall bracket having flow rate up to 12 liters/minutes of Jaquar/Cera/Hindware /Perryware or equivalent make including all necessary pipes,fittings etc.complete as directed by Engineer In Charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.)

Providing and fixing Hands shower (health faucet) with 8 mm dia. 1m long flexible tube having wall hook with approved make including necessary sockets/unionnut etc. complete as directed by Engineer incharge

Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets / union nut etc. complete as directed by Engineer in charge.

Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.

Providing and fixing 20 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. (At drinking water tap)

Providing and fixing sink cock with regular swinging spout (Wall Mounted Model) with wall flange with approved make incluidng other necessary fitting, etc. complete as directed by Engineer in charge.for kitchen sink

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.

Stainless steel hooks and eyes 200 mm

SITC of Electric Hand Drier exposed type AC 240 V (High Speed air) with including necessary accessories for fixing the same with cut-outs, chipping , screws, for recessing & grouting complete to be erected as required at site & as per guideline,satisfaction of Engineer-in-charge and site condition. Optima Hand Dryers Sensor Operated Optimum Hand Dryers. Material : AISI 304 Stainless Steel Finish : Satin Make- Jaguar

SITC of Paper Towel Dispenser including necessary fixing the same with cut-outs, chipping , screws, for recessing & grouting complete to be erected as required at site & as per guideline,satisfaction of Engineer-in-charge and site condition. Wall Mounted Paper towel dispensers towels with C/Z folds.capacity: 400-600 C/Z towels,material: AISI 304 stainless steel,finish: satin MAKE - JAGUAR

SITC of soap dispenser with sensor type including making the necessary complete as directed .Push Button Soap Dispensers, with C.P.fixed to wooden plugs with CP screws,brackets,including necessary fixing the same with cut-outs, chipping for recessing & grouting complete to be erected as required at site & as per guideline, satisfaction of Engineer-in-charge and site condition. Capacity : .8L, Material : ABS, Finish : white/smoked Model No. SDR-WHT-DJ0010F Make : Jaguar

Providing and fixing best quality Indian Mirror wall mounted with chipping and asbestos sheets backing , cromium plated outer edge with proper screws. complete to be erected as required at site & as per guideline, satisfaction of Engineer-in-charge and site condition. (size : 1600 x 500 mm)

SITC of Ivory color Wall Hung European water closet with Wash Basin for Physically Challenged Persons with concealed cistern with necessary Grab Rails, hinged rails, hand rails pan connecter bend,checknut, stopcock etc., colour solid seat and cover with polythene buffer and flap, CP flanges, CP bolts and nuts, bracket with nuts and bolts wall flanges etc. with including necessary accessories for fixing the same with cut-outs, chipping , screws, for recessing & grouting Complete to be erected as required. Wash Basin shall include 15mm dia CP liver operated pillar Cock with pop-up waste coupling, 32mm dia CP bottle trap with extension pipe, supporting bracket with necessary steel to support basin 1 No.15mm CP angle valve with 450mm long CP connection pipe and CP wall flanges all of approved make etc. complete to be erected as required at site & as per guideline,satisfaction of Engineer-in-charge and site condition. Make: Kohler; EWC: 8752IN-S-0; Slip In Connector : TX215C; Seat & Cover: 9525900; Wall Mounting Bracket: LOCAL; Grab Bar- Make - Bobrick , Model - B -4998,b5806; Wash Basin: 2210IN-0; Waste Coupling: 45432IN-CP; Bottle Trap: 7314IN-CP; Angle Cock - 11568IN-7A-CP; Brackets & Screws: BP1804; Sensor Faucet: 18057IN-ND-CP + 1068613IN-CP

Providing and fixing on walls/ ceiling/ floor 15 mm dia. uPVC pipe with necessary, fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete

Providing and fixing on walls/ceiling/floor 20 mm dia. uPVC pipe with necessary, fittings, remaking good the demolished portion etc. complete. Including removing existing, pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 25 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 32 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete

Providing and fixing on walls /ceiling/ floor 40 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete. Air Valve Single Ball Flanged / Screwed - Type - PN -1.6 25 NB

Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and quality of following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete. Air Valve Single Ball Flanged / Screwed - Type - PN -1.6 32 NB

Providing and fixing 8 cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete

Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete.

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-1/259)Lift up to 1.5 m deep

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-1/259) Lift above 1.5 m up to 3.0 m deep

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-1/259) Lift above 3.0 m up to 5.0 m deep

Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd- A-2/259)Lift up to 1.5 m deep

Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd- A-2/259) Lift above 1.5 m up to 3.0 m deep

Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd- A-2/259) Lift above 3.0 m up to 5.0 m deep

Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-3/259)Lift up to 1.5 m deep

Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in- charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) Lift up to 1.5 m deep

Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in- charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259)Lift above 1.5 m up to 3.0 m deep

Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. (Bd-A-5/259) Lift up to 1.5 m deep

Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. (Bd-A-5/259) Lift above 1.5 m up to 3.0 m deep

Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.

Valve chamber with cast iron manhole frame and covers Providing and constructing B.B. masonry valve chambe with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion, 12 mm thick cement plaster in CM 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion x 15 cm thick slab, etc. complete as directed by Engineer-in-charge. As above of 0.6 M x 0.45 M internal size and depth upto 0.9 M with 60 x 45 cm size CI manhole frame and cover of 40 kg. Note : Wall thickness : 0.23 M for depth of 1.2 M and 0.35 M for balance depth exceeding 1.2 M.

Valve chamber with cast iron manhole frame and covers Providing and constructing B.B. masonry valve chambe with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion, 12 mm thick cement plaster in CM 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion x 15 cm thick slab, etc. complete as directed by Engineer-in-charge.As above of 0.90 M x 0.60 M internal size and depth upto 1.5 M with 90 x 60 cm size CI manhole frame and cover of 50 kg.

Valve chamber with cast iron manhole frame and covers Providing and constructing B.B. masonry valve chambe with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion, 12 mm thick cement plaster in CM 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion x 15 cm thick slab, etc. complete as directed by Engineer-in-charge. As above of 1.2 x 1.2 M internal size and depth upto 2.5 M with 53 cm dia CI manhole frame and cover of 90 kg. fixed in RCC slab.

Valve chamber with cast iron manhole frame and covers Providing and constructing B.B. masonry valve chambe with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion, 12 mm thick cement plaster in CM 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion x 15 cm thick slab, etc. complete as directed by Engineer-in-charge.As above of 1.5 x 1.5 M internal size and depth upto 3.0 M with 53 cm dia CI manholeframe and cover of 90 kg. fixed in RCC slab.

Valve chamber with cast iron manhole frame and covers Providing and constructing B.B. masonry valve chambe with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion, 12 mm thick cement plaster in CM 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion x 15 cm thick slab, etc. complete as directed by Engineer-in-charge. As above of 1.5 x 1.5 M internal size and depth upto 5.0 M with 53 cm dia CI manhole frame and cover of 90 kg. fixed in RCC slab.

Providing supplying in standard length (PE material) HDPE Double wall corrugated pipe for non pressure underground drainage and sewerage with smooth internal & corrugated external surface confirming to IS 16098:Part-2 2013 with spigot or plain end with necessary jointing material coupler including transportation and freight charges, inspection charges, loading and unloading charges, conveyance to departmental store and stacking the same in closed shade duly protecting from direct sun ray and rains excluding GST levied by Gol and GoM in all respect, etc. complete. Rate for SN 4 and SN 8i) ID 135 mm dia

Providing supplying in standard length (PE material) HDPE Double wall corrugated pipe for non pressure underground drainage and sewerage with smooth internal & corrugated external surface confirming to IS 16098:Part-2 2013 with spigot or plain end with necessary jointing material coupler including transportation and freight charges, inspection charges, loading and unloading charges, conveyance to departmental store and stacking the same in closed shade duly protecting from direct sun ray and rains excluding GST levied by Gol and GoM in all respect, etc. complete. Rate for SN 4 and SN 8ii) ID 150 mm dia

Providing supplying in standard length (PE material) HDPE Double wall corrugated pipe for non pressure underground drainage and sewerage with smooth internal & corrugated external surface confirming to IS 16098:Part-2 2013 with spigot or plain end with necessary jointing material coupler including transportation and freight charges, inspection charges, loading and unloading charges, conveyance to departmental store and stacking the same in closed shade duly protecting from direct sun ray and rains excluding GST levied by Gol and GoM in all respect, etc. complete. Rate for SN 4 and SN 8iii) ID 200 mm dia

Providing supplying in standard length (PE material) HDPE Double wall corrugated pipe for non pressure underground drainage and sewerage with smooth internal & corrugated external surface confirming to IS 16098:Part-2 2013 with spigot or plain end with necessary jointing material coupler including transportation and freight charges, inspection charges, loading and unloading charges, conveyance to departmental store and stacking the same in closed shade duly protecting from direct sun ray and rains excluding GST levied by Gol and GoM in all respect, etc. complete. Rate for SN 4 and SN 8iv) ID 250 mm dia

Lowering, Laying and Jointing (PE material) HDPE double wall corrugated pipe for non pressure underground by heating to the ends of pipes with the help of tefflon coated electric heater to the required temparature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. The pressing may be required to be done with Jacks/ Hydraulic Jacks/Butt fusion machine etc. complete with all materials labours as directed by Engineer - in - charge. including i) ID 135 mm dia

Lowering, Laying and Jointing (PE material) HDPE double wall corrugated pipe for non pressure underground by heating to the ends of pipes with the help of tefflon coated electric heater to the required temparature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. The pressing may be required to be done with Jacks/ Hydraulic Jacks/Butt fusion machine etc. complete with all materials labours as directed by Engineer - in - charge. includingii) ID 150 mm dia

Lowering, Laying and Jointing (PE material) HDPE double wall corrugated pipe for non pressure underground by heating to the ends of pipes with the help of tefflon coated electric heater to the required temparature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. The pressing may be required to be done with Jacks/ Hydraulic Jacks/Butt fusion machine etc. complete with all materials labours as directed by Engineer - in - charge. including iv) ID 200 mm dia

Lowering, Laying and Jointing (PE material) HDPE double wall corrugated pipe for non pressure underground by heating to the ends of pipes with the help of tefflon coated electric heater to the required temparature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. The pressing may be required to be done with Jacks/ Hydraulic Jacks/Butt fusion machine etc. complete with all materials labours as directed by Engineer - in - charge. includingv) ID 250 mm dia

Providing Sewage treatment Plant (STP) capacity of 30 KLD based on MBBR technology with sludge dewatering, includes Design & Engineering, Manufacture, transport ,installing, testing and Commissioning complete including all local and central taxes ,transportation ,freight charges, transit insurance, inspection charges, loading, unloading , conveyence to store/site and Stacking the same.Vender to provide details of all design item includes civil works as per apporved specification,drawing and Instruction of engineering incharge. Rate to exclude cost of construction of FRP tanks and related work. vendor shall maintan the plant at least 6months from the date of commissioning.Fine Screens 2mm MS aeration Tank,Fine bubble diffuserAir BlowerActivated carbon filterPressure filterDosing systemRAS PumpsLift Station Pumps (including pipes.fittings & valves)including Interconnection piping & valves complete to commission the systemSTP control Panel With interfac including power & control cabling between STP panel and all STP equipments.Including cable tray/conduit as instructed by engineer in charge.

Providing Sewage treatment Plant (STP) capacity of 16 KLD based on MBBR technology with sludge dewatering, includes Design & Engineering, Manufacture, transport ,installing, testing and Commissioning complete including all local and central taxes ,transportation ,freight charges, transit insurance, inspection charges, loading, unloading , conveyence to store/site and Stacking the same.Vender to provide details of all design item includes civil works as per apporved specification,drawing and Instruction of engineering incharge. Rate to exclude cost of construction of FRP tanks and related work. vendor shall maintan the plant at least 6months from the date of commissioning.Fine Screens 2mm MS aeration Tank,Fine bubble diffuserAir BlowerActivated carbon filterPressure filterDosing systemRAS PumpsLift Station Pumps (including pipes.fittings & valves)including Interconnection piping & valves complete to commission the systemSTP control Panel With interfac including power & control cabling between STP panel and all STP equipments.Including cable tray/conduit as instructed by engineer in charge.

Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.Note:- H.D.P.E. Pipes shall be as per latest IS Specifications Also HDPE pipes upto 110 mm Dia shall be in coil form 16 Kg/Sq. cm : 40 mm dia HDPE Pipe in Buried Undergound

Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II 40 mm dia HDPE Pipe in Buried Undergound

Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should beable to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position.40 mm dia HDPE Pipe in Buried Undergound

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete

Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Supplying and erecting 40 mm dia. ball type foot valve having CI body lined with FRP from inside and synthetic rubber coated reinforced, nitrile rubber ball, leaded fin bronze, FRP sheet, carbon steel fasteners, CI./MS strainer complete.

Supplying and erecting 40 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV

Supplying and erecting 32 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV

Supplying and erecting 25 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV

Supplying and erecting 20 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV

Providing and making ISI Mark ferrule connection of 40 mm dia. to water main including ferrule coupling cast iron bell mouth cover, built in non return valve and fixing including excavation and reinstatement complete.

Supplying and erecting 75/80 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Providing and fixing 40 mm diameter water meter with non-return valve including strainer,sockets/ union nut and including water meter box making locking arrangements and lock. [Withoutchamber]

Providing and fixing 32 mm diameter water meter with non-return valve including strainer,sockets/ union nut and including water meter box making locking arrangements and lock. [Withoutchamber]

Providing and fixing 25mm diameter water meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock. [Without chamber].

Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete.

Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG

Supplying and erecting 12/15 mm dia pressure switch with provided isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

Supplying & erecting Water level controller 230/415 V, A.C., Four way under ground & Over head tank operation only.

Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, excluding GST lev-ied by GOI & GOM in all respect including inspec- tion charges, transport to departmental stores, unloading and stacking etc. complete as per IS - 458/1988 Note : One collar should be supplied with each full length plain ended RCC pipe, cost including in rates below. One rubber ring should be supplied with each full length of socketed pipe, cost included in rates below. 200 mm

Lowering, laying and jointing in proper grade and alignment Pre-Stressed Cement Concrete Pipes with rubber ring joints including cost of conveyance from stores to site of works, all labour involved, etc. complete but excluding cost of rubber rings (for all class of pipes)200 mm

Providing and constructing Brick Masonry inspection Chamber 90cm x 45cm including 1:4:8 C.C foundation, 1:2:4 C.C.channels/half round glazed stoneware pipe channel, salt glazed stone-ware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and Outside, with C.I. lead cover of 75 Kilogram with frame fixed in cement concrete.

Excavating hard murum / stone metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete.

Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.

Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50Hz nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification no. APWCR/WC

Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)

Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

Providing and fixing high-density polyethylene (HDPE) container one piece moulded triple layer water tank made out of high density polyethylene and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity up to 20000 litres. (Filter Water Tank (T4))

Providing and fixing high-density polyethylene (HDPE) container one piece moulded triple layer water tank made out of high density polyethylene and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity up to 20000 litres. (Recycle Water Tank (T5))

Supply, Installation, testing and commissioning of Filtration plant # 01 capacity - 6 m3/hr along with the Raw Transfer Water Pump, Pressure Sand Filter, Auto Single Multiport, Activated Carbon Filter, Interconnecting piping, Pressure Gauges, Floats, Control Panel, cabling, Earthing work from DB/Panel to generator Miscellaneous etc.Working Hours : 4Hrs (daily Service) Backwash time : 10-15 minutes or till effluent is clearQuantity of pumps : 2 NosTAG OF PUMP : 1 W + 1 SDesired Flow rate max : 6 cum/h each pumpHead : 20 Mtr.type of pump : centrifugalroundwater samplesTemp of incoming water (Max) : 40 CTotal suspended Solids : -----pH : -----Sulphate as SO3 : ---- PPMChlorides as Cl : ---- PPM

Supply, Installation, testing and commissioning of Water Fountain Filtration plant # 02 capacity - 2 m3/hr along with the Raw Transfer Water Pump, Pressure Sand Filter, Auto Single Multiport, Activated Carbon Filter, Interconnecting piping, Pressure Gauges, Floats, Control Panel, cabling, Earthing work from DB/Panel to generator Miscellaneous etc.Working Hours : 3 Hrs (daily Service) Backwash time : 10-15 minutes or till effluent is clearQuantity of pumps : 2 NosTAG OF PUMP : 1 W + 1 SDesired Flow rate max : 2 cum/h each pumpHead : 30 Mtr.type of pump : centrifugalGroundwater samplesTemp of incoming water (Max) : 40 CTotal suspended Solids : -----pH : -----Sulphate as SO3 : ---- PPMChlorides as Cl : ---- PPDTH Drilling Charges 001 to 100 Ft

DTH Drilling Charges 001 to 100 Ft

DTH Drilling Charges 101 to 200 Ft

DTH Drilling Charges 201 to 300 Ft

DTH Drilling Charges 301 to 400 Ft

DTH Drilling Charges 401 to 500 Ft

7" PVC Casing pipe with Screen 6Kg cm2

10" PVC Outer Casomg lowering & removing charges

Mobilization of Drilling Rig,Pipe,Pebbles etc

Pebbles packing charges

V' NotchTesting Charges by 90 0

Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete. Note:- H.D.P.E. Pipes shall be as per latest IS Specifications Also HDPE pipes upto 110 mm Dia shall be in coil form 16 Kg/Sq. cm : 63 mm Dia HDPE Pipe in Buried Undergound

Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II 63 mm Dia HDPE Pipe in Buried Undergound

Supplying and erecting minimum Three & above star rated submersible pump set of 5.625 KW/7.5 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 60 to 300 LPM discharge at 257 to 15 m head & discharge & delivery pipe of Size-50 mm diameter with a necessary H type clamps as per specification No. WP-SMP

Supplying and erecting 75/80 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying & erecting Fully Automatic Star/delta starter suitable for above 15 H.P. up to 25 H.P. for 3 phase squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame.

Supply and erection of 3Cx 4 sq mm Cu. Flat water proof cable from Bore well Panel to Submersible Pump with all required terminations in the existing panel ,accessories and complete the Work without any extra cost. ( make : Polycab )

Geo Physical Survey & Report Charges

Test report submission for sample water

Supply and installtion of Nylon rope for submersible pump maintenance purpose

Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd- A-2/259)- Lift up to 1.5 m deep

Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd- A-2/259)- Lift above 1.5 m up to 3.0 m deep

Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.

Valve chamber with cast iron manhole frame and covers Providing and constructing B.B. masonry valve chambe with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion, 12 mm thick cement plaster in CM 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion x 15 cm thick slab, etc. complete as directed by Engineer-in-charge. As above of 0.90 M x 0.60 M internal size and depth upto 1.5 M with 90 x 60 cm size CI manhole frame and cover of 50 kg.

Providing supplying in standard length (PE material) HDPE Double wall corrugated pipe for non pressure underground drainage and sewerage with smooth internal & corrugated external surface confirming to IS 16098:Part-2 2013 with spigot or plain end with necessary jointing material coupler including transportation and freight charges, inspection charges, loading and unloading charges, conveyance to departmental store and stacking the same in closed shade duly protecting from direct sun ray and rains excluding GST levied by Gol and GoM in all respect, etc. complete. Rate for SN 4 and SN 8iii) ID 200 mm dia

Lowering, Laying and Jointing (PE material) HDPE double wall corrugated pipe for non pressure underground by heating to the ends of pipes with the help of tefflon coated electric heater to the required temparature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. The pressing may be required to be done with Jacks/ Hydraulic Jacks/Butt fusion machine etc. complete with all materials labours as directed by Engineer - in - charge. including Rate for SN 4 and SN 8iv) ID 200 mm dia

Estimate No. : 121024 / 01 of 2022-23 Providing Internal electrification to Sambhaji Maharaj Samadhi Sthal,Vadhu (BK) Dist. Pune Pune Supplying erecting testing and commissioning cubicle pattern Main LT Panel as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 2 Each of 1000A 4P ACB + 1 Each of 200 Amp TPN MCCB as Incommer & 400 TPN MCCB 1 Each + 300 TPN MCCB 1 Each + 200 TPN MCCB 2 Each + 125 TPN MCCB 1 Each + 100 TPN MCCB 1 Each + 63 TPN MCB 4 Each as outgoing refer SLD (Refer : Annexure Sheet A) Panel complying to design as per IS/IEC 61439

Supplying erecting testing and commissioning cubicle pattern Museum PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 Each of 300 Amp TPN MCCB as Incommer & 200 TPN MCCB 1 Each + 63 TPN MCB 3 Each + 40 TPN MCB 2 Each + 32 TPN MCB 1 Each as outgoing refer SLD (Refer : Annexure Sheet B) Panel complying to design as per IS/IEC 61439

Supplying erecting testing and commissioning cubicle pattern Restaurant PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 Each of 200 Amp TPN MCCB as Incommer & 200 TPN MCCB 1 Each + 63 TPN MCB 4 Each + 40 TPN MCB 3 Each + 32 TPN MCB 1 Each as outgoing refer SLD (Refer : Annexure Sheet C) Panel complying to design as per IS/IEC 61439

Supplying erecting testing and commissioning cubicle pattern BOH PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 Each of 63 Amp TPN MCB as Incommer & 32 DP MCB 11 Each + 32 TPN MCB 4 Each as outgoing refer SLD (Refer : Annexure Sheet D) Panel complying to design as per IS/IEC 61439

Supplying erecting testing and commissioning cubicle pattern APFCR as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 Each of 400 Amp TPN MCCB as Incommer & 30 KVAr Capacitor Bank with MCB 2 Each + 20 KVAr Capacitor Bank with MCB 2 Each + 10 KVAr Capacitor Bank with MCB 2 Each as outgoing refer SLD (Refer : Annexure Sheet E) Panel complying to design as per IS/IEC 61439

Supplying erecting testing and commissioning cubicle pattern ODU PANEL # 01 as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 Each of 200 Amp TPN MCB as Incommer & 40 Amp. FP RCBO 4 Each + 32 TPN RCBO 4 Each as outgoing refer SLD (Refer : Annexure Sheet F) Panel complying to design as per IS/IEC 61439

Supplying erecting testing and commissioning cubicle pattern ODU PANEL # 02 as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 Each of 200 Amp TPN MCB as Incommer & 40 Amp. FP RCBO 3 Each + 32 TPN RCBO 5 Each as outgoing refer SLD (Refer : Annexure Sheet G) Panel complying to design as per IS/IEC 61439

Supplying erecting testing and commissioning cubicle pattern ODU PANEL # 03 as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 Each of 200 Amp TPN MCB as Incommer & 40 Amp. FP RCBO 4 Each + 32 TPN RCBO 4 Each as outgoing refer SLD (Refer : Annexure Sheet H) Panel complying to design as per IS/IEC 61439

Supplying erecting testing and commissioning cubicle pattern Library PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 Each of 200 Amp TPN MCCB as Incommer & 200 TPN MCCB 1 Each + 63 TPN MCB 4 Each + 40 TPN MCB 3 Each + 32 TPN MCB 1 Each as outgoing refer SLD (Refer : Annexure Sheet J) Panel complying to design as per IS/IEC 61439

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (36 poles) or TP MCB of 12 ways (36 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW SWR/MCBDB1

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW SWR/MCBDB1

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification no. SW SWR/MCBDB (CSR No 5-4-1)

Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR No 5-3-11)

Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR No 5-3-10)

Supplying, erecting & marking DPMCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10 kA in provided distribution board as per specification no. SW-SWR/MCB (CSR No 5-3-7)

Supplying, fixing and commissioning 2 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO (CSR No 5-6-10)

Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR No 5-3-10)

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR No 5-3-2)

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR No 5-3-3)

Supplying and erecting LED square / circular Max. 18 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. (CSR NO- 2-1-5 New )

Making suitable size recess in any type of false ceiling for erection of flush type down lighter and finishing the background to match the original surface upto 20W. (CSR NO- 2-1-13) (for boq Each 16)

Supplying and erecting LED Panel Light(600mm X 600mm) Max. 30 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min. 3600 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. (CSR NO- 2-1-7 New)

Making suitable size of recess in any type of false ceiling for erection of flush type LED panel light 600mm x 600mm/1200x300mm and finishing the background to match the original ceiling surface. (CSR NO- 2-1-14) (for boq Each 18)

Supplying and erecting double suspension heavy duty lacquered iron chain with hooks for erecting fluo. tube light fitting (for erecting various fixtures like FTL, LED, etc) with necessary shielded copper flexible wire three core of 1 sq mm for connecting leads. (for measurements half of the actual length used) (CSR NO- 2-3-6) (recess mount Light fitting)

Supplying and erecting IP65 and IK08 rated UV shielded polycarbonate waterproof and dustproof industrial grade LED fitting (4 feet) max. 36W with high transitivity diffuser with system lumens output of min. 4300 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50 , IP20 rated, including driver with auto cutoff & auto restart feature at 325V with end caps on PVC Block/wooden board with 3 years warranty. (CSR NO- 2-2-1)

Supplying and erecting 4 x 9 W spot light having having pressure die-cast aluminium housing lumens output of Min. 830 Lumens Input Voltage is AC 90-300 V,50 Hz, Color Temperature 2700 K-6500 K,Cri - More than 80, Beam Angle 30-90 deg , operating Temperature-20deg to 60 deg centigrade < 10%, 4KV Surge Protection, High Voltage cut off@325V, good color uniformity (CRI≥80), Reliable and robust : Polycarbonate Housing , Suitable for both wall and suspended mounting with relevant mounting accessories, With 2 years warranty Tag - CSL - Ceiling Spot Light (Non CSR)

Supplying and erecting 3 x 9 W spot light having having pressure die-cast aluminium housinglumens output of Min. 830 Lumens Input Voltage is AC 90-300 V,50 Hz, Color Temperature 2700 K-6500 K,Cri - perating Temperature-20deg to 60 deg centigrade < 10%, 4KV Surge Protection, High Voltage cut off@325V, (CRI≥80), Reliable and robust : Polycarbonate Housing , Suitable for both wall and suspended mounting with relevant mounting accessories With 2 years warranty Tag - SCL - Ceiling Spot Light (Non CSR)

Supplying and erecting 9 W wear it well light having Pressuredia cast aluminium in Glossy Gold finish with Acrylic Diffuser. output of Min. 900 Lumens,colour Temperature 2500-2800K,Cri - (CRI≥80), Reliable and robust : Polycarbonate Housing , maximize the endurance over the life time, Versatile Applications : Suitable for both wall and suspended mounting with relevant mounting accessories With 2 years warranty Tag - WSL - Wear it well (Non CSR )

Supplying and erecting 3 x 9 W Ceiling Triplet light having Metal in Glossy Gold finish with Acrylic Diffuser. output of Min. 900 Lumens,colour Temperature 2800-3200K,Cri - More than 240 : Suitable for both wall and suspended mounting with relevant mounting accessories, Equpvalent to article no 304.076.87 With 2 years warranty Tag - STL - Ceiling Triple Light (Non CSR)

Supplying and erecting 3 x 8.5 W wall Twin light with aiming adjust having Metal housing in Glossy Gold finish with Acrylic Diffuser. output of Min. 800 Lumens,colour Temperature 3000-3200K,Cri - More than 240 Product Weight (in Kg) 1 < 10%, (CRI≥80), Reliable and robust : Polycarbonate Housing , Suitable for both wall and suspended mounting with relevant mounting accessories equivalent to article no 604.286.50 With 2 years warranty Tag - TWL - Twin wall Light (Non CSR)

Supplying and erecting 2 x 10 W Surface COB twin downlights with having pressure die cast aluminium with Acrylic Diffuser. output of Min. 1000 Lumens,colour Warm White, body colou Black, Reflector Color White, ownlight Total Harmonic Distortio <20%, Downlight Beam Angle 24°, Downlight CCT 3000k,Downlight Efficiency 85%, Downlight IP Rating IP20, Downlight CRI <10, CRI≥80), equivalent to SKU: DL01-10144 With 2 years warranty Tag - MYL - Milkiway 20W LED (Non CSR)

Supplying and erecting 10 W WHITE (4000K) LED RECESS with having pressure die cast aluminium with Acrylic Cut-Out Dimensions 60 mm, Color Temperature 4000K, Colors White, Beam Angle 36°, CCT 3000K-6500K, Efficiency 85%, IP Rating IP20 , CRI <10, PF 0.98, With 2 years warranty Applications equivalent to SKU: DL01-10073 Tag - ISL (Non CSR)

Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF (CSR NO- 2-10-22 (NEW))

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab. (CSR NO- 2-11-5)

Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire. (CSR NO- 2-11-6)

Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided switch board. (CSR NO- 2-11-9) (for boq no 27)

Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. (CSR NO- 1-6-23)

Point wiring for ceiling fan in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW (Avg. Length 15 Mtr.) (CSR NO- 1-7-13 New)

Point wiring for light/bell/exhaust fan in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG?PW/SW. (Avg. Length 15 Mtr.) (CSR NO- 1-7-12) ( Primary light point)

Point wiring for light/bell/exhaust fan in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG?PW/SW. (stair case with 2 way control point) (CSR NO- 1-7-12)

Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No: WG PW/CW (CSR NO- 1-7-22)

Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG?PW/CW (CSR NO- 1-7-26)

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (CSR NO- 1-1-9)

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. (CSR NO- 1-1-10)

Supplying and erecting 25 mm dia. corrugated flexible polypropylene conduit (CSR NO- 1-2-2 New)

Supplying and erecting mains with 3 x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (CSR NO- 1-3-6)

Supplying and erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (CSR NO- 1-3-7)

Supplying, erecting, testing and commissioning of 20kVA capacity online pure sine wave, with backup time of 1 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, 3 phase input and 3 phase output complete with all protections as per specification no. AP-UPS (CSR NO- 3-7-8 New)

Supplying and erecting 12V/100Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete. (CSR NO- 3-8-12)

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. (CSR NO- 1-6-10)

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. (CSR NO- 1-6-1)

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. (CSR NO- 1-6-11)

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete. (CSR NO- 1-6-2)

Supplying and erecting modular type blanking plate one module, duly erected on provided plate & box. (CSR NO- 1-6-24)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. (CSR NO- 1-6-36)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. (CSR NO- 1-6-37)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. (CSR NO- 1-6-38)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. (CSR NO- 1-6-39)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. (CSR NO- 1-6-40)

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (CSR NO- 1-6-9)

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. (CSR NO- 1-6-10)

Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (CSR NO- 1-3-6)

Supplying and erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (CSR NO- 1-3-7)

SITC of Exit Signages with 1 x 3 W LED. with Single / double sided & hanging arrangement. With Battery Backup. Exit Signages: A range of large exit signs for 32m, 48m or 60m viewing distances with Lithium-Ion (LIION) battery technology. Designed for ceiling installations. Electronics designed to lengthen the life of the battery, minimizing maintenance costs, as well as an environmentally friendly battery Complete as required. (NON CSR)

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 100 mm height comprising all required standard accessories. (CSR NO- 7-11-1)

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 200 mm width & 100 mm height comprising all required standard accessories. (CSR NO- 7-11-2)

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 400 mm width & 100 mm height comprising all required standard accessories. (CSR NO- 7-11-4)

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 500 mm width & 100 mm height comprising all required standard accessories. (CSR NO- 7-11-5)

Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware. (CSR NO- 7-11-11)

Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 200 mm width & 20 mm height complete with necessary hardware. (CSR NO- 7-11-12)

Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 400 mm width & 20 mm height complete with necessary hardware. (CSR NO- 7-11-14)

Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. (CSR NO- 6-1-1)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR NO- 7-2-31)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR NO- 7-2-15)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR NO- 7-2-32)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR NO- 7-2-16)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR NO- 7-2-33)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR NO- 7-2-34)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR NO- 7-1-15)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR NO- 7-1-19)

Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI (CSR NO- 9-1-5)

Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA (CSR NO- 9-1-6)

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP. (CSR NO- 9-2-7)

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP. (CSR NO- 9-2-8)

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Each. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete. (CSR NO - 9-3-1)

Supplying erecting testing and commissioning cubicle pattern Vehicle charging DB for Cars & Bus as per SLD made of 14 SWG MS Sheet IP 65 rated duly painted with 2 coats of enamel paint comprising of the following Incommer 125A TPNE MCCB of as Incommer & 8 Each of 63 A TPN MCB + 2Each of 32A DP MCB as outgoing Vehicle Charging DB (Refer : Annexure Sheet H) Panel complying to design as per IS/IEC 61439

Supplying and erecting Clear post top and Top Mounting LED Lantern - to be installaed in suspended manner on ornamental pole bracketv, 70 W fitting Top mount lantern, Aluminium Di cast Housing, Acrylic Diffuser, with a historical appearance that offers high performance , Luminous flux - 5050 lm, Luminaire efficacy - 70 lm/W, Input Voltage - 150V to 270V AC, Input Frequency - 50 Hz, Ingress Protection - IP65 With 2 years warranty Tag : TF - Clear post top and Top Mounting LED Lantern - 1 x 70 W fitting (NON CSR)

Supplying and erecting of decorative single bracket Street light pole 7 mtr Also, the lighting pole shall be cast iron, All forms of Pole true to the pattern/mould with decorative embellishments. The pole is provided with 3 Each. of hot dip galvanized type Anchor bolts. A door is provided with anchorage and wiring accessories. The colour of lamp is Antique copper. Material used in poles as cast iron parts. The poles are painted with Polyurethane paint for a longer service life. Cast iron, an alloy of iron that contains 2 to 4 percent carbon, along with varying amounts of silicon and manganese and traces of impurities such as sulphur and phosphorus. Bottom of pole is rectangle shape and top or other is circular shape of pole. The product is an all-weather proof & Maintenance free. It’s self coloured textured surface finish with scratch resistant aliphatic grade UV. Stabilized PU. Paint with UV stale Polyurethane. The thermal conductivities properties of cast irons range widely from 20 to 70 w/m/c. Include 2 mtr bottom side decorative pole, 4 mtr plane pole & 1 mtr Invert U decorative gradually decreasing diameter. Surface finish colour coated, Shap is rounded. With 2 years warranty Tag : TF - Clear post top LED Lantern Fixture Mounted Pole (Non CSR)

Earthing for Street light poles - Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP (CSR 9-1-4)

Supplying and erecting Clear post top and Top Mounting LED Lantern - 45 W fitting Relaxed white well-lit, with reduced glare having opal PC diffuser, Symmetrical light distribution, Bottom flange mounted, PDC Heat sink on Top Extruded aluminum body in grey powder coated, in‐built driver, Constant current electronic driver provided protection, Luminous flux - 4500 lm, Luminaire efficacy - 100 lm/W, Input Voltage - 140V to 270V AC, Input Frequency - 50 Hz, Ingress Protection - IP65, 2 year Warranty Tag : GGFL-Gate Light - Opal post top and Top Mounting LED Lantern - 45 W fitting (NON CSR)

Supplying and erecting Concealed type foot/step light Max. 5W having IP67. IK10 rated Pressure die cast housing having system lumens output of Min. 500 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, SDCM<5, p.f. >0.95, operating range of 230-270V, surge protection of 2.5 kV, Life class of 25,000 Hrs. at L70B50, including driver by making necessary arrangement/recess in wall to make it flush with surface with 2 Year warranty. PL-Path Light (2-4-23)

Supplying and erecting integrated LED Bollard Cylindrical/Cubical shaped 800mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with 2 Year warranty as per specification No FG-ODF/FLS2. (2-4-20)

Supplying and erecting IP65 and IK08 rated UV shielded polycarbonate waterproof and dustproof industrial grade LED fitting (4 feet) max. 36W with high transitivity diffuser with system lumens output of min. 4300 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50 , IP20 rated, including driver with auto cutoff & auto restart feature at 325V with end caps on PVC Block/wooden board with 3 years warranty. Tag : TL - Tube Light - 36 W fitting (CSR : 2-2-1)

Supplying and erecting integrated LED flood light fitting Max. 195W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 23400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2. Tag : HM - Flood Light (CSR no -2-4-18)

Supply and erecting 9 m (clear height) Fixed type high-mast (Top-100mm, Bottom - 200mm) with hexagonal /round bracket and foundation bolts suitable for max. 4 Each. flood light fixtures on provided foundation as per specification no. OH-PL/OPL (excluding luminaires). Pole For above Light (CSR no - 8-2-8)

Supplying and erecting integrated focus lights 150W LED power,with different beam angles & multiple lumens output. , 6 LEDs/fixture, CC or DMX512 control. ingress protection of IP66 with powder coated grey color housing.Frequency 50/60 Hz,Control Mode: CC/DMX512,Installation Pipe Diameter: Ø8.5 x 60mm, Temperature of Working Condition: -30⁰~50⁰C with2 year Warranty Tag : SFL - Special Focused Light - 150 W fitting (NON CSR )

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole). (CSR No - 16-3-8) (LED Bollard)

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). (CSR No - 16-3-9) (Street Light Pole)

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 9m & 10m high octagonal/conical GI pole). (CSR No - 16-3-10) (High-Mast Pole)

Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (CSR No - 16-3-5) (for DB)

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. (CSR no - 1-1-10)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-15)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 35 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-16)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 70 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-18)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no- 7-1-19)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 150 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-21)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 240 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-23)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-24)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-27)

Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV (CSR no - 1-3-14)

Supplying, erecting & commissioning 20 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TW (CSR No - 1-9-12)

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 200 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. (CSR No : 7-6-16) For LT power cables

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. (CSR No : 7-6-10) For Street Light cable

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. (CSR No : 7-6-9 ) For CCTV cables

As above of 0.90 M x 0.60 M internal size and depth upto 1.5 M with 90 x 60 cm size CI manhole frame and cover of 50 kg. (CSR No-SECTION L 2(Ca))

R.C.C.pipe Np2 class 225mm dia. 2m long (CSR No - 854 - Civil)

Supplying, erecting, testing and commissioning of 10kW, 3 x 3.3 KW AC Electric Vehicle charger (suitable for 2/3/4 wheeler) having minimum IK08/IP 54 Protection suitable for three phase, 415V AC, 50Hz incoming and 3 Each. output as per IEC 60309 industrial sockets having capacity of output current of 16A 240V AC at each socket with 3.5"TFT touch screen for human interface & LED Light for status indication and metering for measurement of consumed energy having metering accuracy +/-1%, one hour battery backup for communication, emergency push stop button and having short circuit, over & under voltage, overload, over temperature, earth leakage protection and enclosure made of minimum 1.5mm duly RAL7035 Coated M.S, Erected on iron/GI frame on provided cement concrete foundation complete with one year on site warranty, confirming to IS 17017 Series as per specification (CSR No - 4-7-1)

Supply, Installation, Testing and Commissioning 7.2 kW AC Electric Vehicle charger (suitable for 4 wheeler) having minimum IK08 & IP54 protection suitable for single phase, 230V AC, 50Hz, incoming and 1 Each. output having capacity of output current of 32A at 230V with Type two connector as per IEC 62196-2 , Interlocking arrangement & minimum 5 meter charging cable length, 3.5" TFT screen for human interface & LED light for status indication and metering for measurement of consumed energy having metering accuracy +/- 1%, one hour battery backup for server communication, emergency push stop button, with user interface by mobile application/QR Code/RIFD Card/Password Login and having short circuit, over & under voltage, overload, earth leakage ,Over temperature, surge protection and enclosure made of minimum 1.5mm duly RAL7035 coated M.S, erected on iron/GI frame on provided cement concrete foundation complete with one year on site warranty, confirming to IS 17017 Series as per specification (CSR No - 4-7-2)

Supply, Installation, testing and commissioning of Filtration plant # 01 capacity - 6 m3/hr along with the Raw Transfer Water Pump, Pressure Sand Filter, Auto Single Multiport, Activated Carbon Filter, Interconnecting piping, Pressure Gauges, Floats, Control Panel, cabling, Earthing work from DB/Panel to generator Miscellaneous etc. Working Hours : 4Hrs (daily Service) Backwash time : 10-15 minutes or till effluent is clear Quantity of pumps : 2 Each TAG OF PUMP : 1 W + 1 S Desired Flow rate max : 6 cum/h each pump. Head : 20 Mtr. type of pump : centrifugal (NON CSR) (WATER FILTER PLANT)

Estimate No.:121024 / 03 of 2022-23 Providing Lan CCTV to Swarajya Rakshak Dharmveer Chhatrapati Sambhaji Maharaj Samadhi Sthal,Vadhu (BK) Dist. Pune Supplying and installing cat-6 STP cable suitable for networking complete as per specification. (1-10-5)

Supplying and installing cat-6 armoured cable with ECCS tape suitable for networking as per specification No. WG-COC/NC (1-10-7)

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP (CSR.NO 1-12-4)

Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO (CSR.NO 1-12-2)

Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 module duly erected. (CSR.NO 1-6-27)

Supplying & erecting rosette box RJ type Bakelite box on wall with LED indication duly connected as per specification no. WG-TW (CSR.NO 1-9-20)

Supplying and fixing 2 m UTP patch cord of cat 6 type in position as per specification No. WG-COC/PC (CSR.NO 1-10-18)

Supplying and fixing 3 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC (CSR.NO 1-10-19)

Supplying, installing, testing & commissioning digital (hybrid) type EPABX of 6 x 16 extension complete. (CSR.NO 1-9-25)

Supplying, installing, testing & commissioning push button telephone instrument desk top/wall mount with caller ID & Speaker unit as per specification complete. (CSR.NO 1-9-29)

Supplying & erecting 20 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW (CSR.NO 1-8-14)

Supplying & erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid inprovided PVC casing capping/conduit as per specification No. WG-TW (CSR.NO 1-8-1)

Supplying and erecting LSZH armoured multimode optical fibre cable with 6 fibres, core dia 50/125 µm (OM3), suitable upto 10 GBPS, ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification no. WG-COC/OFC LSZH (CSR.NO 1-10-8)

Supplying and erecting 15m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete. (CSR.NO 1-8-23)

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP (CSR No - 1-12-4)

Supplying and fixing 12 ports light guide unloaded interconnect unit, rack mounted type, with adapter panel for termination of optical fibre cables in provided U rack complete as per specification no. WG-NAS/ LIU (CSR No - 1-12-5)

Supplying and fixing IP66 enclosure for fibre splicing complete. (CSR no - 1-10-29)

Supplying and installing 3 m fibre patch cord duplex single mode for OS1/OS2 complete. (CSR.NO 1-10-21)

Supplying and fixing 42 U floor mount server rack (Dimension-DxWxH – 800x1000x2070 mm) as per specification No. WG-NAS/RAK (CSR NO:1-12-29)

Supplying and fixing 15U wall mount rack (Dimension-DxWxH – 500x600x767mm) as per specification No. WG-NAS/RAK (CSR NO:1-12-20)

SITC of IP Dome/ Bullet Camera Supply Installation commissioning of 4 MP Full HD IP Dome /Bullet Camera Image SenCSR 1/3" 4 megapixel progressivescan CMOS Effective Pixels 2304 (H) X 1296 (V) Electronic Shutter Speed 1-1/100000 s Min. Illumination 0.5 lux F2.1 (Color); 0 lux (IR LEDs on IR Distance - nUp to 100 ft (30 m) Day/Night -auto (ICR)/Color/BW Backlight Compensation -BLC/HLC/DWDR White Balance - Auto/Manual Gain Control - Auto/Manual Noise Reduction - 3D Privacy Masking - Up to 4 areas Lens Focal Length - 2.8 mm Horizontal Angle of View 92° 86° -28 Compression H.265 (Main/High/Baseline Profile) /JPEG Resolution 3 MP (2304x1296) 1080p Main Stream 4 MP ,30 fps 16x Digital zoom 60 fps, Resolution- Verifocal lens, 320 db Corridor ModeSupport Network Protocol IPv4/IPV6 HTTP HTTPS CP/IP UDP UPnP ICMP IGMP RTSP RTP SMTP NTP DHCP DNS PPPOE DDNS FTP IP Filter QoS Compatibility -nONVIF Profile SCGI Max. User Access 20 users Mobile App for iPhone iPad Android Phone and Tablet Power Supply PoE (802.3af)12 V DC Working Environment -22°F to 140°F (-30°C to 60°C); 10% to 100% RH condensing ngress Protection IP66Vandal Resistance - IK10 Regulatory FCC Part 15B Class B (3 years warranty) (NON-CSR)

SITC of IP65 2MP IR 1080p Full HD outdoor PTZ Camera 2MP IR Outdoor PTZ Camera with 25X: 1/2.8" Progressive Scan CMOS, 1920 × 1080 at 60fps, 4.8 mm to 120 mm, 25× Optical, 16x digital zoom, Color: 0.005 Lux at F1.6, B/W: 0.001Lux at F1.6, ICR, ONVIF, support H.265,MJPEG, 120 dB WDR, 3D Digital Noise Reduction, HLC, BLC, Defog, EIS, Tripple individually configurable stream, 24 VAC & Hi PoE, IR range: 150m, Pan: 360° endless, Tilt: From -15° to 90° (auto-flip), Pan Speed - from 0.1°/s to 160°/s, Preset Speed: 240°/s, Tilt Speed- from 0.1°/s to 120°/s, Preset Speed: 200°/s, Presets- 300, Alarm Input-2-ch alarm input, Alarm Output-1-ch alarm output, Audio-1 channel input & output, Support on-board storage up to 256 GB (SD card not included), IP66, IK10, Face Detection, Intrusion Detection, Line Crossing Detection, Region Entrance Detection, Region Exiting Detection, UL, CE, FCC certified. Rate shall be Inculding Camera with required all other accesCSRies with Mounting kit Complete as per guideline & site condition. ( (NON-CSR) )

SITC of Operator Workstation Workstation with latest i7 processor, 8 GB RAM, 2 TB HDD, keyboard, mouse, windows 10 Operating system, Graaphics Card: ATI 2GB. Software & Licenced Anti-Virus Software LED Colour Monitor of 15.6 inch. Rate shall be Inculding with required all other accesCSRies Complete as per guideline & site condition (NON-CSR)

Supplying, Erecting, Testing & Commissioning of Full HD commercial display DISPLAY-Screen Size 55-inch Aspect Ratio 16:9 Backlight Scanning 100Hz Resolution 1920x 1080 pixels Viewing Angle178° /178° TERMINAL- VIDEO IN RCA X 1 AUDIO IN (L/R) RCA Pin Type X 2 HDMI IN HDMI 1.4 X 3 USB Input USB 2.0 X 2 RS232C Yes HDMI CEC Yes VGA IN Yes PC AUDIO IN Yes (1) (Share with AC) (NON-CSR)

SITC of 8 TB Surveillance Hard Disk ciard disc product dimensions 10.2 x 2.5 x 15.2 cm item mode nuymber ST4000VX007 memory Storage capacitry 4 TB Flash Memory installed Size 4 TB Digital Storage Capacity 4 TB Hard Drive Rotation Sppeed 5900 RPM Survillance DVRs Hardware Interface SATA 6.0 gB/s Graphics Card Interface PCI-E Compatible Devices Desktop Buffer Size 64 MB (NON-CSR)

Supplying, fixing, and configuring 24 ports + (4 SFP+) ports Managed Layer 2 switch of and web View/CLI, 6KV surge protection on ethernet port and console port for management as per specification complete. (CSR NO : 1-11-11)

Supplying, fixing, and configuring 48 ports managed gigabit switch Layer 2 with 48 10/100/1000 Base-T ports management switch with 4 10GE SFP+ ports erected in provided rack complete. (CSR NO : 1-11-13)

Supplying, fixing, and configuring 8-ports managed gigabit, Layer-2 switch, 10/100/1000 base-T, POE smart switch plus 2 SFP erected in provided rack complete. (CSR NO : 1-11-2)

SITC of Fibre connectivity for Camera Network Switches 1G SFP Module. (NON-CSR)

Supplying, fixing, and configuring media convertor 1000 Base-T to 1000 base?SX SC multi-mode media converter (550m) complete (CSR NO : 1-12-38)

SITC of PoE-based devices, input voltage:- 100 to 240 V AC & output voltage 55 v DC (max 30 W) ( (NON-CSR)

Supplying and fixing 9U IP66 outdoor mount server rack with pole mount bracket (Dimension- DxWxH - 500x600x450 mm) as per specification No. WG?NAS/RAK (CSR NO : 1-12-31)

Estimate No. : 121024 / 04 of 2022-23 Providing Fire Fighting , fire detection alram and PA system to Swarajya Rakshak Dharmveer Chhatrapati Sambhaji Maharaj Samadhi Sthal,Vadhu (BK) Dist. Pune Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 450 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 5.5 kW or of suitable kW capacity for manual / automatic operation and consisting of following : (a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade),mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation boltsetc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP (CSR NO 13-3-1 ) Musem, Library & Canteen Bldg

Providing and fixing high-density polyethylene (HDPE) container one piece moulded triple layer water tank made out of high density polyethylene and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity up to 20000 litres. (CSR NO 4-8-7) (for Museum Building + Libarary Building+Canteen Building)

Supplying and erecting G.I. pipe ‘C’ class ERW 20 mm dia with necessary fittings complete as per specification no. FF-PP (CSR NO 13-6-1 )

Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification no. FF-PP (CSR NO 13-6-6)

Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings complete as per specification no. FF-PP (CSR NO 13-6-7)

Supplying and erecting 150 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV (CSR NO 13-7-15)

Supplying and erecting 100 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV (CSR NO 13-7-14)

Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV (CSR NO 13-7-20)

Supplying and erecting 100 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV (CSR NO 13-7-24)

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV (CSR NO 13-8-13)

Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG (CSR NO 13-8-14)

Supplying and erecting 20 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV (CSR NO 13-7-21)

Supplying and erecting gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV (CSR No 13-7-34)

Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification no. FF-FFA/HV (CSR No 13-8-2)

Supplying and erecting M.S./CRCA cabinet for housing single hydrant valve of size ( 400 x 400 x 400)mm or hose pipe box of size ( 600 x 600 x 200)mm made from min. 1.5 mm thick CRCA sheet with angle iron work of min. of size (25 x 25 x 4) mm having front doors with viewing glass of size (200x150) mm and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5) (CSR No 13-8-18)

Supplying and erecting gun metal branch pipe of 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specification no. FF?FFA/NZ (CSR No 13-8-7)

Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL (CSR No 13-8-4)

Supplying & erecting Float sensor switch for water level controller working on 250V & rated current 8A, with 2 mtr. wire & High quality of wire & plastic body. (CSR No 12-4-28)

Supplying & erecting automatic control panel for 3 Ph, 415 volt, /centrifugal pump set up to 10 HP consisting of Star Delta starter having relay range 9-14 Amp, S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc. (BOOSTER PUMP DB # 01 & 02) (CSR No 12-4-26)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR No 7-2-16 )

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. (CSR NO - 9-2-3)

Supplying, installing, testing and commissioning FR, XLPE armoured cable 4 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB LT/CU ( CSR No 13-9-11 )

Supply & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wallcomplete. (CSR No 13-15-1 )

Providing Round bottom fire bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook complete. (NON CSR)

Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. (CSR NO- 6-1-1)

Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps). (CSR NO -16-3-5)

Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 2 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF-AFAS/CP. (CSR No 13-10-2 New)

Supplying, installing, testing and commissioning of repeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel size shall not more than 175 x 275 x 65 mm conforming to EN 54 or UL approved with 3 years equipment replacement warranty FF-AFAS/RP (CSR No 13-10-5 )

Supplying, installing, testing and commissioning of intelligent addressable thermal/ heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from - 20°C to 38 °C for fixed-heat and rate-of-rise type detectors whereas 0°C to 90°C for highheat type detectors, in built isolation mode, suitable for industrial/ kitchen/ boiler room etc. with 3 years equipment replacement warranty, IS : 2175-1988 reaffirmed 2000, IS 15908:2021 standards FF-AFAS/SD. (CSR No 13-10-8 (New))

Supplying, erecting testing and commissioning optical type smoke detector on suitable back box with necessary connections complete as per specification no. FF-FAS/SD (CSR NO - 13-9-3)

Supplying, erecting testing and commissioning manual call point (Pill box) with break glass, push button (resettable type) in metal enclosure complete as per specification no. FF-FAAS/MCP (CSR No 13-9-6 )

Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty FF-AFAS/SSH. (CSR NO 13-10-13 )

Supplying, installing, testing and commissioning remote response indicators suitable to operate on 5 - 28 V dc supply having FR Polymer ABS Housing complete as per specification no. FF-FAAS/RRI ( CSR NO 13-9-9 )

Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 reed relays, EN 54 or UL Listed FF-AFAS/CRM ( CSR NO 13-10-10(New) )

Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/MM ( CSR NO 13-10-11 (New) )

Supplying, installing, testing and commissioning of addressable fire isolator module complete as required. EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/ISM ( CSR NO 13-10-12 (New) )

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR No 7-2-8)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 4 sq mm copper conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR No 7-2-9)

Supplying, erecting, testing and commissioning 15 to 30 Watts sound column or ceiling mounted complete as per specification no. FF-PA/SOCpplying, erecting, testing and commissioning 15 to 30 Watts sound ( CSR No 13-11-2 )

30W Horn separate with excellent speech reproduction; Rate shall be including with Speakers with mounting base suitable junction boxes, cable-glands, lugs, and Termination with required all other accessories, The speakers shall be of same make as that of the Control Panel & Amplifiers. Rate shall be including all other required accessories and complete as per guideline & site condition. The loudspeaker shall have built-in protection to ensure that, in the event of a fire, damage to the loudspeaker does not result in failure of the circuit to which it is connected. In this way, system integrity shall be maintained; ensuring loudspeakers in other areas can still be used to inform people of the situation. The loudspeaker shall have ceramic terminal blocks, thermal fuse, and heat-resistant, high temperature wiring. 30W Horn speaker with excellent speech reproduction Max Power: 45 W, Rated Power: 30 Watts Effective frequency range (-10 dB) :490 Hz to 4500 Hz SPL at rated power (1Khz at 1 m) 115 dB Opening Angle 1 KHz /4 KHz (-6 dB):112 (H) /85 (V) IP rating: - IP 65 (Non CSR)

Supplying, erecting, testing and commissioning stand mounted/handheld type wired microphone having 2 mV/Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with min. 7 metre shielded cable and 3 Pin Professional XLR Connector, stereo jack complete as per specification no. FF-PA/MIC (CSR No 13-11-3)

Supplying, erecting, testing and commissioning rust free microphone table stand of chrome plating/powder coating or S.S. material, up to 500 mm height and suitable basefor sturdy mechanism ensuring trouble free movement complete.plying, erecting, testing and commissioning rust free microphone table (CSR No 13-11-5)

Supplying, erecting, testing and commissioning 120 W amplifier suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply complete as per specification no. FF-PA/AFR (CSR No 13-11-1)

SITC of EN-54 Certified EVAC PA controller with minimum 4 zones in the system and expandable up to 6 zones with 14x 4 Audio matrix with full DSP functionality. 8 audio inputs, 4 audio outputs, 4 channel output matrix. Shall support the following: single line switching or redundant group A/B switching, amplifier redundancy, 4 x 100V audio inputs and 12 speaker line outputs. 8000 fault, warning, and event conditions log. Built in message manager for 100 emergency/business calls up to 85 minutes. 10 control inputs and 13 control outputs. Impedance measurement and Pilot Tone supervision for speaker line monitoring. Frequency response (ref. 1 kHz) 20 Hz to 20 kHz (-0.5 dB), Signal-to-noise ratio (A-weighted): Line in to line out: 106 dB typical, THD+N < 0.05%, Crosstalk (line level) Line in to line out (0 dB gain): < 100 dB at 1 kHz, Sample rate 48 kHz, DSP processing resolution 24-bit linear A/D and D/A conversion, 48-bit processing. Should be provided with a Configuration and Graphics User Interface Software. Audio inputs (100 V): AMP IN: 2 ✕ 6-pin port; Max. voltage - 120 V; • Max. power - 500 W; PVA-4CR12; Component :1) PVA-4CR12 2) CAN terminating resistor (120 ohm) 3) Foot stand (self-adhesive) 3) Operation manual 4) Important safety instructions. Rate shall be including all other required accessories and complete as per guideline & site condition. (NON CSR )

Supplying, erecting, testing and commissioning of 2 core shielded cable complete as per specification no. FF-PA/MCC (CSR No 13-11-6)

Supplying, erecting, testing and commissioning of 1.5 sq. mm speaker wire complete. (CSR No 13-11-10)

Supplying & erecting FRP box of size 150mm x 125mm x 100 mm, 2.7 mm thick complete on pole/wall as per specification No. CB-SB (CSR No 7-8-8)

Estimate No. : 121024 / 05 of 2022-23 Providing HT Electrification to Swarajya Rakshak Dharmveer Chhatrapati Sambhaji Maharaj Samadhi Sthal,Vadhu (BK) Dist. Pune Supplying, erecting, testing and commissioning 22 KV HT metering cubical (compact / vertical type) approved by MSEDCL / licensee fabricated with 2mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating /epoxy paint of required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos. CT having required ratio between 50/5A to 200/5A, VA 10 or 15, Class 0.2S, epoxy casted 3 nos. PT having ratio 11000/V3/110/V3 VA 50, Class 0.2suitable for provided trivector meter, and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation. (CSR No : 6-4-2)

Supplying and erecting rolled steel joist (girder) pole 150 x 80 mm / 150 x 75 mm (14.9 kg /m) with base plate in provided foundation as per specification no. OH-PL/RSJ (CSR No 8-1-11 )

Supplying & erecting pole bracket fabricated from ISM channel of size 75x40x6mm, 1100mm long for necessary nos. of provided insulators and welded with extension channel pieces of same size 300 mm in length and erectingon pole with 50x6mm clamp complete as per specification no. OH-PL/BKT (CSR No 8-3-10 )

Supplying and erecting porcelain disc type insulator 70KN with necessary hardware suitable for 22kV line, complete as per specification no. OH-INS/DI (CSR No 8-5-7 )

Supplying and erecting porcelain post type insulator with nut bolts suitable for 22kV line, complete as per specification no. OH-INS/PST (CSR No 8-5-13)

Supplying and erecting 22 kV outdoor type gang operated air break, triple pole switch 200 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp (CSR No 10-6-3)

Supplying and erecting, 22 kV outdoor type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15A capacity complete erected on provided cross arm (CSR No 10-6-6)

Supplying and erecting G.I. stay set for poles, including loop insulators at inaccessible height with anchor plate 300x300x6mm., straining screws, G.l. stay wire 7/10 SWG, G.l. stay rod 20mmx1.8m length and pole clamps duly erected in provided cement concrete foundation complete. (CSR No 8-6-1)

Supplying and erecting ACSR conductor of size 6/1-2.11 mm complete.(squirrel) (85kg/km) as per specification No. OH-CON/ACSR . (CSR No 8-4-6)

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. (CSR No 9-2-3) (50 x 6 - 2.5 Kg/Mtr)

Supplying and erecting pole clamp made from 50x10mm MS flat for pole or pipe, post erected with 15mm bolts and nuts duly painted with one coat of red oxide and two coats of aluminium paint complete. (CSR No 8-6-11)

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no.EA-EP (CSR No 9-1-4)

Supplying, installing, testing and commissioning SF 6 Insulated 22kV, 630A, 16kA/3sec, 1 way outdoor, extensible motorised SCADA compatible RMU, internal arc tested as per electric supply company specification consisting of 1 no. feeder with 1 VCB compliant to IEC 62271 -100, 200 and 102, as per specification no. SW-HTS/RMU SCADA (CSR No 5-9-22)

Supplying, installing, testing & commissioning 3 phase, 22/0.433 kV, 50 Hz., 400 kVA, Mineral oil immersed and naturally cooled outdoor type, Copper wound Non-sealed transformer delta/star connected with additional neutral brought out on load side, temperature rise should not exceed 45℃ by thermometer in oil and 50℃ by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) with HV tapping (with off load tap changer) off Load +5 to -10 in steps of 2.5%, having 7 number of tap positions with standard accessories complete with test certificate with losses below 1286 Watts at 50% load, 3623 Watts at 100% load as per IS:1180 (part 1) : 2014 with necessary permissions of Electrical Inspector, as per specification no SS- TR-NSL (CSR No 10-1-19 (NEW))

Supplying, erecting, testing and commissioning of diesel generating set with alternator of 380/400 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 65.5 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 450 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG (CSR No 11-1-20)

DG Exhaust pipe sitc of 150 mm class B black pipe with bends and other accessories as required with Thermal insulation with 100 mm thick rock wool and cladded with 0.6 mm AL foil for 150mmm dia (Non CSR )

Supplying , erecting & terminating XLPE insulated galvanised steel formed wire armoured (strip) cable 22 kV(E), 3 x 150 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT (CSR No 7-3-18)

Providing and erecting Heat shrinkable indoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT (CSR No 7-5-13)

Providing and erecting Heat shrinkable outdoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT (CSR No 7-5-16)

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP (CSR NO 9-1-3)

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP (CSR NO 9-1-2)

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA EP. (CSR NO 9-2-7)

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP. (CSR NO 9-2-8)

Supplying & erecting cast iron cable indicator plate buried along with route of cable for PVC / XLPE armoured cable as per specification No. CB-CIP (CSR NO 7-8-1)

Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution, etc. (All above contents shall be of standard makes) (CSR NO 10-6-24)

Estimate No. : 121024 / 06 of 2022-23 Providing Solar PV Generation to Swarajya Rakshak Dharmveer Chhatrapati Sambhaji Maharaj Samadhi Sthal,Vadhu (BK) Dist. Pune Supplying, installing, testing and commissioning of 25 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 75 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB , MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card / chip for 5 years including net charges for RMS System, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG. (CSR Item - 4-5-6 (New))

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authorStructural Steel for Panel size (1.6 x 1.2) Mtr and 300 Nos. (CSR Item 6-1-19)

Supplying and installation of Solar PV Module cleaning unit consisting of nozzles spray, necessary pipes, valves, post, electronic panel board concealed with weather proof cabinet, spreading water periodically for removal of dust, related motor pump, controller, timer and nozzles set suitable for covering 5 KW Solar PV Module. (Approx. 35 Sq. Mtr. PV Module area). (CSR No 4-8-8)

Providing and fixing high-density polyethylene (HDPE) container one piece moulded triple layer water tank made out of high density polyethylene and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity up to 20000 litres. (CSR - 4-8-7)

Supplying erecting testing and commissioning cubicle pattern electrical control panel (Solar Power evacuation Panel (50 Kwp System) as per SLD) made of 14 /16 / 18 / 20SWG MS Sheet IP 54 rated duly painted with 2 coats of enamel paint comprising of the following 63 A FP MCB 3 nos as and 100 Amp FP MCCB 1 no as outgoing (Refer : - Annexure Sheet - 100 - ECP)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no- 7-1-19)

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 400 mm width & 75 mm height complete with necessary coupler plates & hardware. (CSR - 7-11-9)

Supplying and erecting LT CT multifunction DLMS compliance energymeter of accuracy of class 0.5 , 3x240V,50 Hz with optical & RS 232 port,backlit LCD, measure & display trivector energy, load survey, TOD, tamper detection & logging, power ON /OFF events, instantaneous parameters of rating 1/5 A with display in absence of power complete with zero adjustment & test certificate from manufacturer erected on provided M.S. box and connected to CTs. (CSR No 6-3-5)

Estimate No. : 121024 / 7 of 2022-23 Providing Lift/Elevator to Swarajya Rakshak Dharmveer Chhatrapati Sambhaji Maharaj Samadhi Sthal,Vadhu (BK) Dist. Pune SITC of Electric Traction Passenger Lift with Rated capacity :- 13 Passenger/884Kg · Floors :- G+1 floor (2 Stops/2 Landings) · Travel :- 3 to 4.2 mtrs. · Location of Lift Machine:- MR/MRL · Rated speed :- 1.0mps VS· Car/Landing door clear opening of 900/1000 mm wide x 2000 mmhigh· Clear Car size of 2000 mm wide x 1100mm deep x 2250mm high · Lift shaft available having clear size of 2250 mm wide x 3120 mm deep,1200 mm Pit depth, ………mm Overhead. Doors type :- COPO/TOPO Doors with frame made from SS 304 gradesolid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landingdoors with SS door architraves/frames The lift doors shall have minimum 1hour fire rating (with submission of necessary valid test certificate issuedby NABL accredited or Independent test laboratory).· Lift car nclosure made from SS 304 grade solid (non-cladded) sheet of1.5mm, thick with hairline finish with frame made from MS girders, bracing ofadequate size with minimum safety factor of 5, with Toe Guard Apron, withnecessary false ceiling with adequate LED lights, blower/fan for ventilation & SSchequered plate flooring, handrails, mirror, emergency light etc. The lift carinterior design shall be done as per the directions of engineer in charge.· COP with SS face plate having metallic push buttons with Braille code &luminous indicator around button with FPI, scrolling UP/DN LED indicator &with / without attendant key switch, OWD with audio-visual alarm, VAS inMarathi, Hindi & English with intercom system with telephone instrument in Liftcar, LMR & FCC/ground floor.· LOP with SS face plate having recess/surface push button box for alllandings with scrolling UP/DN LED indicator having metallic push buttons withBraille code & luminous indicator around button with CPI, Lift car arrival & nexttravel direction audio-visual indication at all landings.· Lift controller based on microprocessor/ PLC with VVVF Drive havingclosed loop control system, with IBMS compatible having necessary port. Thecontroller shall have necessary protections such as overcurrent, overvoltage, overspeed, overheat for all devices including lift motor and travel directionprotection, protection for phase loss at input or output etc. various operationmodes such as maintenance, change direction by attendant, full load bypass, VIPcall operation, self levelling operation, call cancel facility, auto return to homelanding, fireman evacuation operation, earthquake operation, door open/closeoperation from COP etc. The system can record information for minimum 30latest faults, with real-time clock management and handheld keypad with LCDscreen for view and setting of parameters, The control panel duly wired withproper size & strength, copper wire for power & control circuit, with provisionfor addition of floor/control card & allied accessories control panel havingenclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class. · ARD complete with necessary SMF VRLA batteries.· Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2 nos minimum 2.0MP FHD IPbased vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimedon Lift machinery & controller with NVR kept in LMR/FCC with HDR databackup for min. 90 days with min. 18” FHD TV monitor, to be kept inFCC/LMR as directed by Engineer In Charge.· Lift Machine of Gearless PMSM of suitable kW with duty cycle ofminimum 120 starts/hr (with submission of necessary valid test certificate issuedby NABL accredited or Independent test laboratory), with Traction pulley, OSG,electromagnetic brakes, entire assembly mounted on adequate size girders dulyfixed on LMR floor/ shaft walls complete with main/diverter traction sheaves,suspension wire ropes/belts of adequate size & strength.· Other mechanical parts such as 'T' section adequate size guide rails for car &counter weight with brackets fasteners, counter weight frame with necessaryblocks, buffers with necessary support arrangement, MS pit ladder etc. erectedwith necessary steel work. Minor civil work such as alteration work if any necessary for erection oflanding door frames and it's accessories e.g. sill, header, hole pass etc completewith plaster finish, civil work for erection buffers, erection of lift machinery,adequate size core cuts if required & scaffolding for erecting guide rails, providingand fixing steel girders/RCC work having adequate strength for mounting andhoisting lift machine etc. complete as per specification no. LFT.· General: - Job includes entire procedure of obtaining all necessary erectionpermissions & "License to Work the Lift" from Electrical Inspector(Lifts) withsubmission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the dateof commissioning. (CSR NO - 17-1-5)

Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR NO - 5-3-13)

Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f.>0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver,IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.Supplying and erecting electronic type driver for indoor LED 25W-40W fixture (CSR NO 2-1-15)

Point wiring in for light/fan/bell in 20 mm metal conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SWsuitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%. (CSR NO -1-7-1)

Point wiring for independent plug in 20 mm metal conduit with 1.5 sq.m (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SWFor Shaft (CSR NO -1-7-2)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR NO -7-2-31)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR NO -7-2-8)

Supplying, erecting & marking DPMCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR NO -5-3-7)

Supplying, fixing and commissioning 2 pole, RCBO 6 / 10 / 16 / 20 / 25A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO (CSR NO -5-6-9)

Supplying, fixing and commissioning 4 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO (CSR NO -5-6-13)

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/ FP MCB / RCCB / RCBO complete erected on angle iron/GI frame. (CSR NO -5-4-13)

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. (CSR NO -1-6-1)

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete (CSR NO -1-6-10)

Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected.Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected. (CSR NO -1-6-29)

Supplying and erecting Ceiling rose / Batten holder / Slanting holder /hanging cord switch / hanging bell push / pendant holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box. (CSR NO -1-5-7)

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP (CSR NO -9-1-2)

Supplying and erecting annealed bare copper wire of high purity of required sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws complete. (CSR NO -9-2-4)

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly (CSR NO -6-1-19) painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. (CSR NO -6-1-19)

Sub Estimate No. 123024/08 of 2022-23 Providing HVAC System to Swarajyarakshak Dharmaveer Chhatrapatee Sambhaji Maharaj Samadhi Sthal, Vadhu (BK), Tal. Shirur Dist. Pune. Supplying, erecting, testing and commissioning 10 HP, VRF / VRF air conditioning system, out door unit (ODU) type-IV OEM standards working on HFCfree refrigerant R410A or other required/ suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celcius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 meter operation in cooling mode with inverter based VRF/VRF technology microprocessor based control compressor starter / control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil seperator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V + 10%, 50 Hz, 3 phase power supply, internal wiring and discharge of refrigerant, etc. all housed in powder coated weather proof cabinate on provided angle iron frame or suitable foundation connected to the system in approved manner complete. (CSR No. 3-11-3)

Supplying, erecting, testing and commissioning 12 HP, VRF / VRF air conditioning system, out door unit (ODU) type-IV OEM standards working on HFCfree refrigerant R410A or other required/ suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celcius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 meter operation in cooling mode with inverter based VRF/VRF technology microprocessor based control compressor starter / control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil seperator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V + 10%, 50 Hz, 3 phase power supply, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinate on provided angle iron frame or suitable foundation connected to the system in approved manner complete. (CSR No. 3-11-4)

Supplying, erecting, testing and commissioning 14 HP, VRF / VRF air conditioning system, out door unit (ODU) type-IV OEM standards working on HFCfree refrigerant R410A or other required/ suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celcius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 meter operation in cooling mode with inverter based VRF/VRF technology microprocessor based control compressor starter / control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil seperator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V + 10%, 50 Hz, 3 phase power supply, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinate on provided angle iron frame or suitable foundation connected to the system in approved manner complete. (CSR No. 3-11-5)

Supplying, erecting, testing and commissioning 16 HP, VRF / VRF air conditioning system, out door unit (ODU) type-IV OEM standards working on HFCfree refrigerant R410A or other required/ suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celcius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 meter operation in cooling mode with inverter based VRF/VRF technology microprocessor based control compressor starter / control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil seperator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V + 10%, 50 Hz, 3 phase power supply, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinate on provided angle iron frame or suitable foundation connected to the system in approved manner complete. (CSR No. 3-11-6)

Supplying, erecting, testing and commissioning 18 HP, VRF / VRF air conditioning system, out door unit (ODU) type-IV OEM standards working on HFCfree refrigerant R410A or other required/ suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celcius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 meter operation in cooling mode with inverter based VRF/VRF technology microprocessor based control compressor starter / control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil seperator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V + 10%, 50 Hz, 3 phase power supply, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinate on provided angle iron frame or suitable foundation connected to the system in approved manner complete. (CSR No. 3-11-7)

Supply, Installation, Testing and Commissioning of VRF/VRV based ceiling suspended 4 way cassette indoor unit (IDU) compact/ standard size of nominal cooling capacity 3.3TR (1165 cfm) to 4.0 TR (1218) having EER as per BEE standard and specification, suitable as per site requirement with swing louvers and adjustable blades feome sides, indoor unit complete with in-built drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for coastal area complete in all respects, to operate on 1- phase, 230V, 50Hz, AC input supply, consisting with any additional refrigerant and oil charged as per requirement during installation and connected to the system complete. (CSR No. 3-11-23)

supplying and installation of high pressure grade required size copper connection Y or T -joints / refinet for liquid and suction line complete erected on wall / ceiling with supports/ raceways, nitrile rubber insulation, painting etc. with brazing and testing for leakage confirming the normal operation of the VRV/VRF air conditioning system. (CSR No. 3-11-86)

Supplying, erecting, testing and commissioning centralised programmable remote control panel (HMI) touch manager controls minimum 16 system of minimum 64 ODU's can be controlled and up to 992 IDU's can be individually mounted and controlled indoor units having minimum 200 mm size colour LCD touch panel, yearly scheduled, power proportional distribution function, temperature limitation, history function complete erected on wall with an arrangements to integrate with provided fire alarm system. (CSR No.3-11-79)

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3TR to 1.6TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC. (CSR No. 3-2-11 (New))

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 2.1TR to 2.3TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC. (CSR No.3-2-14 (New))

Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 12mm complete. (CSR No. 3-2-26 (New))

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 12 mm for solar water heater/AC system. (CSR No. 4-2-9)

supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 6.4 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. (CSR No. 3-11-97)

supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. (CSR No. 3-11-96)

supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. (CSR No. 3-11-95)

supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. (CSR No. 3-11-94)

supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. (CSR No. 3-11-93)

supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 22.2 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. (CSR No. 3-11-92)

supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 28.6 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. (CSR No. 3-11-91)

supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 34.9 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. (CSR No. 3-11-90)

supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. (CSR No. 3-11-89)

Supplying and erecting circular flexible / rigid PVC pipe duct of size 100 mm dia, 4 mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc. with sealing complete with provided control/ air flow regulating valves / dampers, filters at position. (CSR No. 3-11-65)

Supplying and erecting an air flow regulating valves / dampers in provided flexible or rigid duct / pipe of 100 mm size with an alteration for existing flexible PVC pipe duct and necessary joints, sealing, coupling, complete at position. (CSR No. 3-11-71)

Supply, installation, testing and commissioning of manually operated, opposed blade, duct mounted, flanged volume control dampers of required sizes in GI construction with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete. (CSR No. 3-11-80)

Supplying and installing of collar damper of galvanised iron material of upto 120 microns for anti corrosive resistance for supply air grill of suitable size. (CSR No. 3-11-87)

Supplying and erecting aluminium powder coated linear grill of suitable size for width length without collar dampers having matching colour with the existing false ceiling and suitable for deflection of 15/30/45°. (CSR No. 3-11-88)

carrying out core cutting of size 3'' to 5'' dia x 15'' length in the c.c./rock/stone wall with help of specialized core cutting machine in proper manner and finishing the site as original. (CSR No. 3-11-77)

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware. (CSR No. 7-11-8)

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware. (CSR No. 7-11-6)

Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware in approved manner. (CSR No. 7-11-11)

Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 300 mm width & 20 mm height complete with necessary hardware in approved manner. (CSR No. 7-11-13)

Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV. (CSR No. 1-3-15)

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON. (CSR No. 1-2-4)

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. (CSR No. 6-1-19)

Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation. (CSR No. 2-10-15)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 400 CFM (Fresh Air Fan) (Non CSR)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 300 CFM (Fresh Air Fan) (Non CSR)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 700 CFM (Exhaust Air Fan) (Non CSR)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 600 CFM (Exhaust Air Fan) (Non CSR)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 500 CFM (Exhaust Air Fan) (Non CSR)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 300 CFM (Exhaust Air Fan) (Non CSR)

Supply, Installation, Testing & Commissioning of Hard PVC condensate drain water piping with necessary clamps, supports, hangers and fitting such as bend, tees, reducers etc. duly insulated with 9 mm thick chemically cross-linked closed cell polyethylene foam. 50 mm Dia. (Non CSR)

Supply, Installation, Testing & Commissioning of Hard PVC condensate drain water piping with necessary clamps, supports, hangers and fitting such as bend, tees, reducers etc. duly insulated with 9 mm thick chemically cross-linked closed cell polyethylene foam. 40 mm Dia. (Non CSR)

Supply, Installation, Testing & Commissioning of Hard PVC condensate drain water piping with necessary clamps, supports, hangers and fitting such as bend, tees, reducers etc. duly insulated with 9 mm thick chemically cross-linked closed cell polyethylene foam. 32 mm Dia. (Non CSR)

Supply, Installation, Testing & Commissioning of Hard PVC condensate drain water piping with necessary clamps, supports, hangers and fitting such as bend, tees, reducers etc. duly insulated with 9 mm thick chemically cross-linked closed cell polyethylene foam. 25 mm Dia. (Non CSR)

Supply, Installation, Testing & Commissioning of Hard UPVC supply water piping using plumbing grade UPVC pipes. The piping shall be properly clamped using saddle & pressure clamps. (50 mm Dia) (Non CSR)

Supply, Installation, Testing & Commissioning of Hard UPVC supply water piping using plumbing grade UPVC pipes. The piping shall be properly clamped using saddle & pressure clamps. (32 mm Dia) (Non CSR)

Supply, Installation, Testing & Commissioning of cast brass ball valves chrome plated ball inside and hard chrome plated ball PTFE (Teflon) seal and ring and chrome plated steel centre handle with female BSP threads as directed by the Engineer-in-Charge .including all taxes, for all leads and lifts, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)25 mm dia. (Non CSR)

Supply, Installation, Testing & Commissioning of Pressure Balancing valve suitable for 50mm Dia pipe so as to maintain 1kG pressure in the line. (Non CSR)

Supply, Fabrication, Installation & Testing of GI Ducting Factory Fabricated with T.D.Flange as per SMACNA Class-2 with conventional supports of full Threaded GI rods of required size. All Plenums to be made out of 18 G Only. Use of 26G sheets for duct fabrication not permitted). Ducts to be properly sealed along the Joints & Flanges with approved sealant. Ducts to be tested for leakage with Smoke leakage test. Plenums to be fabricated in 18G only. No slip joints allowed.120 GSM zinc coating to consider. The quoted price shall include the cost of minor works like wall opening & closing to run the supply & return ducts. The Pressure testing of sheet metal ducts shall be carried out for complete air distribution system, The testing shall be performed before insulating the ducts as per SMACNA standards. The entire air distribution system shall be balanced to supply the air quantities as required in various zones and rooms to maintain the specified room conditions. Air Balancing of each individual supply air outlet to within +10% or -5% of the design air quantity and tabulating the same in a form of report and also the final air balancing figures shall be indicated against each measured outlets in the as built drawings. Balancing shall also include balancing of return air, supply air and outdoor fresh air quantity. Cost for air balancing before and after the client occupancy shall be considered by vendor, after client occupancy vendor shall monitor and record the air quantity at peak ambient in each terminals for a period of 15 days based on the observations vendor shall redo the air balancing as required. Calibrated air flow hoods shall be used for measuring the air flow across the square diffusers, Grill etc. and Calibrated velocity matric shall be used for measuring return air and calibrated pitot tubes with electronic controller to measure main duct airflow and static pressure. 24 G (Non CSR)

Supply, Fabrication, Installation & Testing of GI Ducting Factory Fabricated with T.D.Flange as per SMACNA Class-2 with conventional supports of full Threaded GI rods of required size. All Plenums to be made out of 18 G Only. Use of 26G sheets for duct fabrication not permitted). Ducts to be properly sealed along the Joints & Flanges with approved sealant. Ducts to be tested for leakage with Smoke leakage test. Plenums to be fabricated in 18G only. No slip joints allowed.120 GSM zinc coating to consider. The quoted price shall include the cost of minor works like wall opening & closing to run the supply & return ducts. The Pressure testing of sheet metal ducts shall be carried out for complete air distribution system, The testing shall be performed before insulating the ducts as per SMACNA standards. The entire air distribution system shall be balanced to supply the air quantities as required in various zones and rooms to maintain the specified room conditions. Air Balancing of each individual supply air outlet to within +10% or -5% of the design air quantity and tabulating the same in a form of report and also the final air balancing figures shall be indicated against each measured outlets in the as built drawings. Balancing shall also include balancing of return air, supply air and outdoor fresh air quantity. Cost for air balancing before and after the client occupancy shall be considered by vendor, after client occupancy vendor shall monitor and record the air quantity at peak ambient in each terminals for a period of 15 days based on the observations vendor shall redo the air balancing as required. Calibrated air flow hoods shall be used for measuring the air flow across the square diffusers, Grill etc. and Calibrated velocity matric shall be used for measuring return air and calibrated pitot tubes with electronic controller to measure main duct airflow and static pressure. 22 G (Non CSR)

Supply,Installation,Testing & Commissioning of 150 mm Disc Valve. PVC / HDPE Material Only. (Ordering by HVAC vendor only after Approval of Technical Specifications & Colour shade of Physical sample by Consultant & Architect). (Non CSR)

Supply, Installation, Testing & Commissioning of Aluminium powder coated Non Vision Type Louvers. (Non CSR)

Supply, Installation, Testing & Commissioning of Underdeck Roof insulation with 19 mm thick Nitrile rubber insulation with Aluminium foil on one side. (Non CSR)

Supply, installation, testing and commissioning of UV Coating For Exposed Pipes to Atmosphere . Piping insulation to be covered with Woven Glass Cloth 100 gsm and finished in U/V Treatment. (Non CSR)

Supply & Top of Additional Refrigerant R410A for VRV / VRF System as per Manufacturer requirement. (Non CSR)

Estimate No. : 121023 / 01 of 2022-23 Providing Internal electrification to Swarajya Rakshak Dharmveer Chhatarpati Sambhaji Maharaj Balidan Sthal,Tulapur Dist. Pune Supplying erecting testing and commissioning cubicle pattern Main LT Panel as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 2 Each of 1000A 4P ACB + 1 Each of 200 Amp TPN MCCB as Incommer & 630 TPN MCCB 1 Each + 400 TPN MCCB 1 Each + 200 TPN MCCB 1 Each + 125 TPN MCCB 1 Each + 100 TPN MCCB 1 Each + 63 TPN MCB 3 Each as outgoing refer SLD (Refer : Annexure Sheet A) Panel complying to design as per IS/IEC 61439

Supplying erecting testing and commissioning cubicle pattern Auditorium + Museum PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 Each of 300 Amp TPN MCCB as Incommer & 200 TPN MCCB 1 Each + 63 TPN MCB 5 Each + 40 TPN MCB 3 Each + 32 TPN MCB 1 Each as outgoing refer SLD (Refer : Annexure Sheet B) Panel complying to design as per IS/IEC 61439

Supplying erecting testing and commissioning cubicle pattern Restaurant PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 Each of 200 Amp TPN MCCB as Incommer & 200 TPN MCCB 1 Each + 40 TPN MCB 5 Each as outgoing refer SLD (Refer : Annexure Sheet C) Panel complying to design as per IS/IEC 61439

Supplying erecting testing and commissioning cubicle pattern BOH PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 Each of 63 Amp TPN MCB as Incommer & 32 DP MCB 12 Each + 32 TPN MCB 3 Each as outgoing refer SLD (Refer : Annexure Sheet D) Panel complying to design as per IS/IEC 61439

Supplying erecting testing and commissioning cubicle pattern APFCR as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 Each of 400 Amp TPN MCCB as Incommer & 30 KVAr Capacitor Bank with MCB 2 Each + 20 KVAr Capacitor Bank with MCB 2 Each + 10 KVAr Capacitor Bank with MCB 2 Each as outgoing refer SLD (Refer : Annexure Sheet E) Panel complying to design as per IS/IEC 61439

Supplying erecting testing and commissioning cubicle pattern ODU PANEL # 01 as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 Each of 200 Amp TPN MCB as Incommer & 40 Amp. FP RCBO 10 Each + 32 TPN RCBO 4 Each as outgoing refer SLD (Refer : Annexure Sheet F) Panel complying to design as per IS/IEC 61439

Supplying erecting testing and commissioning cubicle pattern ODU PANEL # 02 as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 Each of 200 Amp TPN MCB as Incommer & 40 Amp. FP RCBO 3 Each + 32 TPN RCBO 5 Each as outgoing refer SLD (Refer : Annexure Sheet G) Panel complying to design as per IS/IEC 61439

Supplying & erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc . (CSR No 12-4-17) For Water filteration RC Pump

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (36 poles) or TP MCB of 12 ways (36 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW SWR/MCBDB1 (CSR No 5-4-17)

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW SWR/MCBDB1 (CSR No 5-4-16)

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB (CSR No 5-4-1)

Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR No 5-3-11)

Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR No 5-3-10)

Supplying, erecting & marking DPMCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10 kA in provided distribution board as per specification no. SW-SWR/MCB (CSR No 5-3-7)

Supplying, fixing and commissioning 2 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO (CSR No 5-6-10)

Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR No 5-3-10)

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR No 5-3-2)

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR No 5-3-3)

Supplying and erecting LED square / circular Max. 18 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. (CSR NO- 2-1-5 New ) (for museum/ Liabrary building)

Making suitable size recess in any type of false ceiling for erection of flush type down lighter and finishing the background to match the original surface upto 20W. (CSR NO- 2-1-13)

Supplying and erecting LED Panel Light(600mm X 600mm) Max. 30 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min. 3600 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. (CSR NO- 2-1-7 New) (for Library building)

Making suitable size of recess in any type of false ceiling for erection of flush type LED panel light 600mm x 600 mm / 1200x300mm and finishing the background to match the original ceiling surface. (CSR NO- 2-1-14) (for boq Each 18)

Supplying and erecting double suspension heavy duty lacquered iron chain with hooks for erecting fluo. tube light fitting (for erecting various fixtures like FTL, LED, etc) with necessary shielded copper flexible wire three core of 1 sq mm for connecting leads. (for measurements half of the actual length used) (CSR NO- 2-3-6) (recess mount Light fitting)

Supplying and erecting IP65 and IK08 rated UV shielded polycarbonate waterproof and dustproof industrial grade LED fitting (4 feet) max. 36W with high transitivity diffuser with system lumens output of min. 4300 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50 , IP20 rated, including driver with auto cutoff & auto restart feature at 325V with end caps on PVC Block/wooden board with 3 years warranty. (CSR NO- 2-2-1)

Supplying and erecting 9 W spot light having having pressure die-cast aluminium housinglumens output of Min. 830 Lumens Input Voltage is AC 90-300 V,50 Hz, Color Temperature 2700 K-6500 K,Cri - More than 80, Beam Angle 30-90 deg , perating Temperature-20deg to 60 deg centigrade < 10%, 4KV Surge Protection, High Voltage cut off@325V, color rendering (CRI≥80), Reliable and robust : Polycarbonate Housing , Suitable for both wall and suspended mounting with relevant mounting accessories with 3 years warranty. Tag - CSL - Ceiling Spot Light (Non CSR)

Supplying and erecting 9 W wear it well light having Pressuredia cast aluminium in Glossy Gold finish with Acrylic Diffuser. output of Min. 900 Lumens,colour Temperature 2500-2800K,Cri - More than 120 Product Weight (in Kg) 3 < 10%, 4KV Surge Protection, High Voltage cut off@325V, makes it a perfect fit, (CRI≥80), Reliable and robust : Polycarbonate Housing , Suitable for both wall and suspended mounting with relevant mounting accessories Tag - WSL - Wear it well (Non CSR )

Supplying and erecting 9 W Ceiling Triplet light having Metal in Glossy Gold finish with Acrylic Diffuser. output of Min. 900 Lumens,colour Temperature 2800-3200K,Cri - More than 240 Product Weight (in Kg) 1 < 10%, 4KV Surge Protection, High Voltage cut off@325V, Suitable for both wall and suspended mounting with relevant mounting accessories, Equivalent to article no 304.076.87 with 3 years warranty. Tag - STL - Ceiling Triple Light (Non CSR)

Supplying and erecting 3 x 8.5 W wall Twin light with aiming adjust having Metal in Glossy Gold finish with Acrylic Diffuser. output of Min. 800 Lumens,colour Temperature 3000-3200K,Cri - More than 240 Product Weight (in Kg) 1 < 10%, 4KV Surge Protection, High Voltage cut off@325V, Applications : Suitable for both wall and suspended mounting with relevant mounting accessories equivalent to article no 604.286.50 Tag - TWL - Twin wall Light (Non CSR)

Supplying and erecting 2 x 10 W Surface COB twin downlights with having pressure die cast aluminium with Acrylic Diffuser. output of Min. 1000 Lumens,colour Warm White, body colou Black, Reflector Color White, ownlight Total Harmonic Distortio <20%, Downlight Beam Angle 24°, Downlight CCT 3000k, Efficiency 85%, Downlight IP Rating IP20, PF 0.98, (CRI≥80), Reliable and robust : Polycarbonate Housing , equivalent to SKU: DL01-10144 Tag - MYL - Milkiway 20W LED (Non CSR)

Supplying and erecting 10 W WHITE (4000K) DIMMABLE LED RECESS with having pressure die cast aluminium with Acrylic Cut-Out Dimensions 60mm, Color Temperature 4000K, Colors White, Dimmer Option Triac Dimmable, Lumens 100-110Lm/W, Total Harmonic Distortion<20%, Beam Angle 36°, CCT 3000K-6500K, Efficiency 85%, IP Rating IP20 , CRI <10, PF 0.98, Mounting Type Recess, with 3 years warranty. Applications equivalent to SKU: DL01-10073 Tag - ISL (Non CSR)

Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF (CSR NO- 2-10-22 (NEW))

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab. (CSR NO- 2-11-5)

Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire. (CSR NO- 2-11-6)

Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided switch board. (CSR NO- 2-11-9) (for boq no 27)

Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. (CSR NO- 1-6-23)

Point wiring for ceiling fan in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW (Avg. Length 15 Mtr.) (CSR NO- 1-7-13 New)

Point wiring for light/bell/exhaust fan in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG?PW/SW. (Avg. Length 15 Mtr.) (CSR NO- 1-7-12) ( PRimary light point)

Point wiring for light/bell/exhaust fan in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG?PW/SW. (stair case with 2 way control point) (Chapter 1.7 Point Wiring (WG-PW ) Note: 3)

Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No: WG PW/CW (CSR NO- 1-7-22)

Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG?PW/CW (CSR NO- 1-7-26)

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (CSR NO- 1-1-9)

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. (CSR NO- 1-1-10)

Supplying and erecting 25 mm dia. corrugated flexible polypropylene conduit (CSR NO- 1-2-2 New)

Supplying and erecting mains with 3 x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (CSR NO- 1-3-6)

Supplying and erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (CSR NO- 1-3-7)

Supplying, erecting, testing and commissioning of 20kVA capacity online pure sine wave, with backup time of 1 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, 3 phase input and 3 phase output complete with all protections as per specification no. AP-UPS (CSR NO- 3-7-8 New)

Supplying and erecting 12V/100Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete. (CSR NO- 3-8-12)

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. (CSR NO- 1-6-10)

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. (CSR NO- 1-6-1)

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. (CSR NO- 1-6-11)

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete. (CSR NO- 1-6-2)

Supplying and erecting modular type blanking plate one module, duly erected on provided plate & box. (CSR NO- 1-6-24)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. (CSR NO- 1-6-36)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. (CSR NO- 1-6-37)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. (CSR NO- 1-6-38)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. (CSR NO- 1-6-39)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. (CSR NO- 1-6-40)

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (CSR NO- 1-6-9)

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. (CSR NO- 1-6-10)

Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (CSR NO- 1-3-6)

Supplying and erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (CSR NO- 1-3-7)

SITC of Exit Signages with 1 x 3 W LED. with Single / double sided & hanging arrangement. With Battery Backup. Exit Signages: A range of large exit signs for 32m, 48m or 60m viewing distances with Lithium-Ion (LIION) battery technology. Designed for ceiling installations. Electronics designed to lengthen the life of the battery, minimizing maintenance costs, as well as an environmentally friendly battery Complete as required. (NON CSR)

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 100 mm height comprising all required standard accessories. (CSR NO- 7-11-1)

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 200 mm width & 100 mm height comprising all required standard accessories. (CSR NO- 7-11-2)

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 400 mm width & 100 mm height comprising all required standard accessories. (CSR NO- 7-11-4)

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 500 mm width & 100 mm height comprising all required standard accessories. (CSR NO- 7-11-5)

Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware. (CSR NO- 7-11-11)

Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 200 mm width & 20 mm height complete with necessary hardware. (CSR NO- 7-11-12)

Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 400 mm width & 20 mm height complete with necessary hardware. (CSR NO- 7-11-14)

Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. (CSR NO- 6-1-1)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 150 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR NO- 7-1-21)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR NO- 7-1-19)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR NO- 7-1-15)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR NO- 7-2-31)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR NO- 7-2-15)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR NO- 7-2-32)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR NO- 7-2-33)

Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI (CSR NO- 9-1-5)

Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA (CSR NO- 9-1-6)

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP. (CSR NO- 9-2-7)

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP. (CSR NO- 9-2-8)

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Each. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete. (CSR NO - 9-3-1)

Supplying erecting testing and commissioning cubicle pattern Vehicle charging DB for Cars & Bus as per SLD made of 14 SWG MS Sheet IP 65 rated duly painted with 2 coats of enamel paint comprising of the following Incommer 125A TPNE MCCB of as Incommer & 8 Each of 63 A TPN MCB + 2Each of 32A DP MCB as outgoing Vehicle Charging DB (Refer : Annexure Sheet H) Panel complying to design as per IS/IEC 61439

Supplying and erecting Clear post top and Top Mounting LED Lantern - 70 W fitting , ALuminium Di cast Housing with Acrylic Diffusers Top mount lantern , Luminous flux - 5050 lm, Luminaire efficacy - 70 lm/W, Input Voltage - 150V to 270V AC, Input Frequency - 50 Hz, Ingress Protection - IP65 Tag : TF - Clear post top and Top Mounting LED Lantern - 1 x 70 W fitting (NON CSR)

Supplying and erecting of decorative single bracket Street light pole 7 mtr Also, the lighting pole shall be cast iron, All forms of Pole true to the pattern/mould with decorative embellishments. The pole is provided with 3 Each. of hot dip galvanized type Anchor bolts. A door is provided with anchorage and wiring accessories. The colour of lamp is Antique copper. Material used in poles as cast iron parts. The poles are painted with Polyurethane paint for a longer service life. Cast iron, an alloy of iron that contains 2 to 4 percent carbon, along with varying amounts of silicon and manganese and traces of impurities such as sulphur and phosphorus. Bottom of pole is rectangle shape and top or other is circular shape of pole. The product is an all-weather proof & Maintenance free. It’s self coloured textured surface finish with scratch resistant aliphatic grade UV. Stabilized PU. Paint with UV stale Polyurethane. The thermal conductivities properties of cast irons range widely from 20 to 70 w/m/c. Include 2 mtr bottom side decorative pole, 4 mtr plane pole & 1 mtr Invert U decorative gradually decreasing diameter. Surface finish colour coated, Shap is rounded. Tag : TF - Clear post top LED Lantern Fixture Mounted Pole (Non CSR)

Earthing for Street light poles - Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP (CSR 9-1-4)

Supplying and erecting Clear post top and Top Mounting LED Lantern - 45 W fitting (BLS BOR 45W WW CL TM) Relaxed white well-lit, with reduced glare having opal PC diffuser,, PDC Heat sink on Top Extruded aluminum body in grey powder coated, Luminaire is wired with in‐built driver, Constant current electronic driver provided with high voltage, open & short circuit protection, Luminous flux - 4500 lm, Luminaire efficacy - 100 lm/W, Input Voltage - 140V to 270V AC, Input Frequency - 50 Hz, Ingress Protection - IP65 with 3 years warranty. Tag : GGFL-Gate Light - Opal post top and Top Mounting LED Lantern - 45 W fitting (NON CSR)

Supplying and erecting Concealed type foot/step light Max. 5W having IP67. IK10 rated Pressure die cast housing having system lumens output of Min. 500 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, SDCM<5, p.f. >0.95, operating range of 230-270V, surge protection of 2.5 kV, Life class of 25,000 Hrs. at L70B50, including driver by making necessary arrangement/recess in wall to make it flush with surface with 2 Year warranty. (2-4-23)

Supplying and erecting integrated LED Bollard Cylindrical/Cubical shaped 800mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with 2 Year warranty as per specification No FG-ODF/FLS2. (2-4-20)

Supplying and erecting integrated LED flood light fitting Max. 195W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 23400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2. Tag : HM - Flood Light (CSR no -2-4-18)

Supplying and erecting 16 m (clear height) motorized high-mast (Top-150mm,Bottom- 360mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN -10025 S 355/E350 & 3 mm thickness, with base plate 25 mm thick x OD 520 mm grade as per IS-2062, pole made in single section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel 316 grade 2 Each., 7x19 construction 5mm, SG-DG U clamps, double drum winch assembly 350 kg, 5x2.5 sq.mm flexible copper cable with lantern carriage assembly suitable for max. 12 Each.luminaires and its control gear box, lightning arrestor, arrangement for fixingaviation light, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with necessary accessories complete. specification no. OHPL/ HM (excluding luminaries) Pole For above Light (CSR no - 8-2-2)

SITC Building focus lights with different beam angles & multiple lumens output. 150W power, 6 LEDs/fixture, CC or DMX512 control. These lights come with an ingress protection of IP66 with powder coated grey color housing.Frequency 50/60 Hz,Control Mode: CC/DMX512,Installation Pipe Diameter: Ø 8.5 x 60 mm,Temperature of Working Condition: -30⁰~50⁰C, with 3 years warranty. Tag : SFL - Special Focused Light - 150 W fitting (NON CSR )

SITC Underwater Lights 50 W (IP68) with any colour Pressure Die cast, These are made of Stainless Steel grade SS 316,7’’ diameter round type wall mount LED Bulb,9 W,12 V DC. Protection class IP67 suitable for fountain of different colours. 12 V DC converter to be supplied separately for the said fitting. Tag : WIL - Underwater Lights - 50 W fitting ( NON CSR )

Supplying and erecting IP65 and IK08 rated UV shielded polycarbonate waterproof and dustproof industrial grade LED fitting (4 feet) max. 36W with high transitivity diffuser with system lumens output of min. 4300 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50 , IP20 rated, including driver with auto cutoff & auto restart feature at 325V with end caps on PVC Block/wooden board with 3 years warranty. Tag : TL - Tube Light - 36 W fitting (CSR : 2-2-1)

SITC of Integrated flood light outdoor type (RGBW) , Main material used is high strength aluminium die casting material, surface anti-ageing electrostatic spray processing,super resistance to corrosiont,Toughened glass cover, High strength impact resistance.Configurable white or monochromatic RGB, Lighting effects with gorgeous color purity and powerful change.Voltage of AC100-277V with beam angle is 25°x60°Of 3980 Lumen , RGB colour , 6 Kg net weight, 3 years warranty, Equivalent to LHEPBNUSP47J113 with 3 years warranty. Tag : RM - Ranger maxi- 110 W fitting For Statue Illumination (NON CSR )

SITC of 31 W Color changing & monochromatic Buried Uplighter ideal for uplighting facades, columns & features with multiple Optics & extensive pallet of colors.The Luminaire body uses high pressure die-casting aluminium. The cover uses stainless steel while the buried barrel uses high-quality corrosionresistantnylon. The diffuser use thickened toughened glass, having an advantages inimpact resistance and abrasion. the diffuser and light cover is at the same level, no fall. The source light adopts high quality LEDs, monochrome or RGB color It’s carried out by the DMX512 system Humanized design, fit for a wide range of demand in various pplications temperature ofthe cover is low, High strength toughened glass, can withstand a weight of 2500KG.equivalent to LHEOGCP5P48V031 with 3 years warranty. Tag : GPH - Gate Pillar highlight - 31 W (Non CSR)

SITC of Engross Mini (Mono) 13 W Monochromatic Buried Uplighter ideal for uplighting landscape,facades, columns & features with multiple Optics & saturated tones of white.Luminaire body uses high pressure die-casting aluminium. The coveruses stainless steel while the buried barrel uses high-quality corrosionresistant nylon. diffuser use thickened toughened glass, having an advantages in impact resistance and abrasion. the diffuser and light cover is at the same level, no fall High strength toughened glass, can withstand a weight of 2500KG Equivalent to LHEOGCP5P48J012 with 3 years warranty. Tag : EMN - Engross Mini (Mono)- 13 W (Non CSR)

SITC of adron Mini 6 W Monochromatic Buried Uplighter ideal for uplighting landscape,facades, columns & features with multiple Optics & saturated tones of white..Housing mode up of Die Casting grey powder Coated aluminium.Hard chrome plated stainless steel SUS 316L grade front ring.IP68 PG-9 PA66 cable gland.Operating temperature -20° C~40° C.ABS 015 mounting sleeve. Equivalent to LHEOAEPBU48J002 with 3 years warranty. Tag : AD- Adorn (Mono))- 6 W (Non CSR)

SITC of 27 W Color changing & monochromatic Buried Uplighter ideal for uplighting facades, columns & features with multiple Optics & extensive pallet of colors.The Luminaire body uses high pressure die-casting aluminium. The coveruses stainless steel while the buried barrel uses high-quality corrosionresistantnylon. The diffuser use thickened toughened glass, having an advantages inimpact resistance and abrasion. the diffuser and light cover is at the samelevel, no fall. The source light adopts high quality LEDs, monochrome or RGB color It’s carried out by the DMX512 system Humanized design, fit for a wide range of demand in variouspplications temperature ofthe cover is low, High strength toughened glass, can withstand a weight of 3400 KG.Equivalent to LHEOGCPSU48V027with 3 years warranty. Tag : EMX - Engross MaxiRGB/Mono- 27 W (Non CSR)

SITC of 12 W Stylish & Modern Linear color changing & monochromatic wall grazer with multi angle lens design to meet the demands of various Lighting design outlook.Simple, stylish, and modern design, with aluminium alloy shell and overall molding process. Special structure design ensures good heat radiation, and reduces LED’s light wane effectively.Lumen 600 w , Color code is RGB, net weight is 0.7 Kg , Suspended light Equivalent to LHEUADP5UN7J012 with 3 years warranty. Tag : LV - LINEATE VILE FOR SAMADHI- 12 W (Non CSR)

SITC of 2 W, LED Monochromatic Buried Uplighter ideal for uplighting landscape,facades, columns & features with multiple Optics & saturated tones of white.Housing mode up of Die Casting grey powder Coated aluminium.Hard chrome plated stainless steel SUS 316L grade front ring.Operating temperature-20 C~40° C. ABS 015 mounting sleeve., 143 Lumens, ≥ 80, net weight 0.3Kg equivalent to LHEOAEPBU48J002 Tag : ADM - Adorn mini- 2 W (Non CSR)

SITC of 9 W, Stylish & Modern color changing & monochromatic Linear wall grazer with multi angle lens design to meet the demands of various Lighting design outlook.It adopts standard DMX512 control interface.497 Lumen, ≥ 70 CRI, 0.7kg weight equivalent to LHEUADPSUN7J009 with 3 years warranty. Tag : LM - LINEATE MINI- 9 W (Non CSR)

Supplying and erecting LED Strip light 5m Length Max. 45 W IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50, including driver with 1 year warranty Tag : STRL - LED Strip (CSR NO - 2-1-10)

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole). (CSR No - 16-3-8)

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). (CSR No - 16-3-9) (Street Light Pole)

Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 16 m raising lowering high mast). (CSR No - 16-3-13)

Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for DB) (CSR No - 16-3-5)

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. (CSR no - 1-1-10)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-15)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 35 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-16)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-17)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no- 7-1-19)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 150 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-21)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-24)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-27)

Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV (CSR no - 1-3-14)

Supplying, erecting & commissioning 20 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TW (CSR No - 1-9-12)

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 200 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. (CSR No : 7-6-16) For LT power cables

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. (CSR No : 7-6-10) For Street Light cable

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. (CSR No : 7-6-9 )For CCTV cables

As above of 0.90 M x 0.60 M internal size and depth upto 1.5 M with 90 x 60 cm size CI manhole frame and cover of 50 kg. (CSR No-SECTION L 2(Ca))

R.C.C.pipe Np2 class 225mm dia. 2m long (CSR No - 854 - Civil)

Supplying, erecting, testing and commissioning of 10kW, 3 x 3.3 KW AC Electric Vehicle charger (suitable for 2/3/4 wheeler) having minimum IK08/IP 54 Protection suitable for three phase, 415V AC, 50Hz incoming and 3 Each. output as per IEC 60309 industrial sockets having capacity of output current of 16A 240V AC at each socket with 3.5"TFT touch screen for human interface & LED Light for status indication and metering for measurement of consumed energy having metering accuracy +/-1%, one hour battery backup for communication, emergency push stop button and having short circuit, over & under voltage, overload, over temperature, earth leakage protection and enclosure made of minimum 1.5mm duly RAL7035 Coated M.S, Erected on iron/GI frame on provided cement concrete foundation complete with one year on site warranty, confirming to IS 17017 Series as per specification (CSR No - 4-7-1)

Supply, Installation, Testing and Commissioning 7.2 kW AC Electric Vehicle charger (suitable for 4 wheeler) having minimum IK08 & IP54 protection suitable for single phase, 230V AC, 50Hz, incoming and 1 Each. output having capacity of output current of 32A at 230V with Type two connector as per IEC 62196-2, Interlocking arrangement & minimum 5 meter charging cable length, 3.5" TFT screen for human interface & LED light for status indication and metering for measurement of consumed energy having metering accuracy +/- 1%, one hour battery backup for server communication, emergency push stop button, with user interface by mobile application/QR Code/RIFD Card/Password Login and having short circuit, over & under voltage, overload, earth leakage ,Over temperature, surge protection and enclosure made of minimum 1.5mm duly RAL7035 coated M.S, erected on iron/GI frame on provided cement concrete foundation complete with one year on site warranty, confirming to IS 17017 Series as per specification (CSR No - 4-7-2)

Filtration plant and Above Ground Water Tank Supply, Installation, testing and commissioning of Filtration plant # 01 capacity - 6 m3/hr along with the Raw Transfer Water Pump, Pressure Sand Filter, Auto Single Multiport, Activated Carbon Filter, Interconnecting piping, Pressure Gauges, Floats, Control Panel, cabling, Earthing work from DB/Panel to generator Miscellaneous etc. Working Hours : 4Hrs (daily Service) Backwash time : 10-15 minutes or till effluent is clear Quantity of pumps : 2 Each TAG OF PUMP : 1 W + 1 S Desired Flow rate max : 6 cum/h each pump Head : 20 Mtr. type of pump : centrifugal (NON CSR)

Supply, Installation, testing and commissioning of Water Fountain Filtration plant # 02 capacity - 2 m3/hr along with the Raw Transfer Water Pump, Pressure Sand Filter, Auto Single Multiport, Activated Carbon Filter, Interconnecting piping, Pressure Gauges, Floats, Control Panel, cabling, Earthing work from DB/Panel to generator Miscellaneous etc. Working Hours : 3 Hrs (daily Service) Backwash time : 10-15 minutes or till effluent is clear Quantity of pumps : 2 Each TAG OF PUMP : 1 W + 1 S Desired Flow rate max : 2 cum/h each pump Head : 30 Mtr. type of pump : centrifugal (NON CSR)

Estimate No.:121023 / 03 of 2022-23 Providing Lan CCTV to Swarajya Rakshak Dharmveer Chhatrapati Sambhaji Maharaj Balidan Sthal,Tulapur Dist. Pune Supplying and installing cat-6 STP cable suitable for networking complete as per specification. (1-10-5)

Supplying and installing cat-6 armoured cable with ECCS tape suitable for networking as per specification No. WG-COC/NC (1-10-7)

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP (CSR.NO 1-12-4)

Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO (CSR.NO 1-12-2)

Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 module duly erected. (CSR.NO 1-6-27)

Supplying & erecting rosette box RJ type Bakelite box on wall with LED indication duly connected as per specification no. WG-TW (CSR.NO 1-9-20)

Supplying and fixing 2 m UTP patch cord of cat 6 type in position as per specification No. WG-COC/PC (CSR.NO 1-10-18)

Supplying and fixing 3 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC (CSR.NO 1-10-19)

Supplying, installing, testing & commissioning digital (hybrid) type EPABX of 6 x 16 extension complete. (CSR.NO 1-9-25)

Supplying, installing, testing & commissioning push button telephone instrument desk top/wall mount with caller ID & Speaker unit as per specification complete. (CSR.NO 1-9-29)

Supplying & erecting 20 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW (CSR.NO 1-8-14)

Supplying & erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid inprovided PVC casing capping/conduit as per specification No. WG-TW (CSR.NO 1-8-1)

Supplying and erecting LSZH armoured multimode optical fibre cable with 6 fibres, core dia 50/125 µm (OM3), suitable upto 10 GBPS, ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification no. WG-COC/OFC LSZH (CSR.NO 1-10-8)

Supplying and erecting 15m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete. (CSR.NO 1-8-23)

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP (CSR No - 1-12-4)

Supplying and fixing 12 ports light guide unloaded interconnect unit, rack mounted type, with adapter panel for termination of optical fibre cables in provided U rack complete as per specification no. WG-NAS/ LIU (CSR No - 1-12-5)

Supplying and fixing IP66 enclosure for fibre splicing complete. (CSR no - 1-10-29)

Supplying and installing 3 m fibre patch cord duplex single mode for OS1/OS2 complete. (CSR.NO 1-10-21)

Supplying and fixing 42 U floor mount server rack (Dimension-DxWxH – 800x1000x2070 mm) as per specification No. WG-NAS/RAK (CSR NO:1-12-29)

Supplying and fixing 15U wall mount rack (Dimension-DxWxH – 500x600x767mm) as per specification No. WG-NAS/RAK (CSR NO:1-12-20)

SITC of IP Dome/ Bullet Camera Supply Installation commissioning of 4 MP Full HD IP Dome /Bullet Camera Image SenCSR 1/3" 4 megapixel progressivescan CMOS Effective Pixels 2304 (H) X 1296 (V) Electronic Shutter Speed 1-1/100000 s Min. Illumination 0.5 lux F2.1 (Color); 0 lux (IR LEDs on IR Distance - nUp to 100 ft (30 m) Day/Night -auto (ICR)/Color/BW Backlight Compensation BLC/HLC/DWDR White Balance - Auto/Manual Gain Control - Auto/Manual Noise Reduction - 3D Privacy Masking - Up to 4 areas Lens Focal Length - 2.8 mm Horizontal Angle of View 92° 86°-28 Compression H.265 (Main/High/Baseline Profile) /JPEG Resolution 3 MP (2304x1296) 1080p Main Stream 4 MP ,30 fps 16x Digital zoom 60 fps, Resolution- Verifocal lens, 320 db Corridor Mode Support Network Protocol IPv4/IPV6 HTTP HTTPS CP/IP UDP UPnP ICMP IGMP RTSP RTP SMTP NTP DHCP DNS PPPOE DDNS FTP IP Filter QoS Compatibility -nONVIF Profile SCGI Max. User Access 20 users Mobile App for iPhone iPad Android Phone and Tablet Power Supply PoE (802.3af)12 V DC Working Environment -22°F to 140°F (-30°C to 60°C); 10% to 100% RH condensing ngress Protection IP66Vandal Resistance - IK10 Regulatory FCC Part 15B Class B (3 years warranty) (NON-CSR)

SITC of IP65 2MP IR 1080p Full HD outdoor PTZ Camera 2MP IR Outdoor PTZ Camera with 25X: 1/2.8" Progressive Scan CMOS, 1920 × 1080 at 60fps, 4.8 mm to 120 mm, 25× Optical, 16x digital zoom, Color: 0.005 Lux at F1.6, B/W: 0.001Lux at F1.6, ICR, ONVIF, support H.265,MJPEG, 120 dB WDR, 3D Digital Noise Reduction, HLC, BLC, Defog, EIS, Tripple individually configurable stream, 24 VAC & Hi PoE, IR range: 150m, Pan: 360° endless, Tilt: From -15° to 90° (auto-flip), Pan Speed - from 0.1°/s to 160°/s, Preset Speed: 240°/s, Tilt Speed- from 0.1°/s to 120°/s, Preset Speed: 200°/s, Presets- 300, Alarm Input-2-ch alarm input, Alarm Output-1-ch alarm output, Audio-1 channel input & output, Support on-board storage up to 256 GB (SD card not included), IP66, IK10, Face Detection, Intrusion Detection, Line Crossing Detection, Region Entrance Detection, Region Exiting Detection, UL, CE, FCC certified. Rate shall be Inculding Camera with required all other accesCSRies with Mounting kit Complete as per guideline & site condition. ( (NON-CSR) )

SITC of Operator Workstation Workstation with latest i7 processor, 8 GB RAM, 2 TB HDD, keyboard, mouse, windows 10 Operating system, Graaphics Card: ATI 2GB. Software & Licenced Anti-Virus Software LED Colour Monitor of 15.6 inch. Rate shall be Inculding with required all other accesCSRies Complete as per guideline & site condition (NON-CSR)

Supplying, Erecting, Testing & Commissioning of Full HD commercial display DISPLAY-Screen Size 55-inch Aspect Ratio 16:9 Backlight Scanning 100Hz Resolution 1920x 1080 pixels Viewing Angle178° /178° TERMINAL- VIDEO IN RCA X 1 AUDIO IN (L/R) RCA Pin Type X 2 HDMI IN HDMI 1.4 X 3 USB Input USB 2.0 X 2 RS232C Yes HDMI CEC Yes VGA IN Yes PC AUDIO IN Yes (1) (Share with AC) (NON-CSR)

SITC of 8 TB Surveillance Hard Disk ciard disc product dimensions 10.2 x 2.5 x 15.2 cm item mode nuymber ST4000VX007 memory Storage capacitry 4 TB Flash Memory installed Size 4 TB Digital Storage Capacity 4 TB Hard Drive Rotation Sppeed 5900 RPM Survillance DVRs Hardware Interface SATA 6.0 gB/s Graphics Card Interface PCI-E Compatible Devices Desktop Buffer Size 64 MB (NON-CSR)

Supplying, fixing, and configuring 24 ports + (4 SFP+) ports Managed Layer 2 switch of and web View/CLI, 6KV surge protection on ethernet port and console port for management as per specification complete. (CSR NO : 1-11-11)

Supplying, fixing, and configuring 48 ports managed gigabit switch Layer 2 with 48 10/100/1000 Base-T ports management switch with 4 10GE SFP+ ports erected in provided rack complete. (CSR NO : 1-11-13)

Supplying, fixing, and configuring 8-ports managed gigabit, Layer-2 switch, 10/100/1000 base-T, POE smart switch plus 2 SFP erected in provided rack complete. (CSR NO : 1-11-2)

SITC of Fibre connectivity for Camera Network Switches 1G SFP Module. (NON-CSR)

Supplying, fixing, and configuring media convertor 1000 Base-T to 1000 base- (CSR NO:1-12-38)

SITC of PoE-based devices, input voltage:- 100 to 240 V AC & output voltage 55 v DC (max 30 W) ( (NON-CSR)

Supplying and fixing 9U IP66 outdoor mount server rack with pole mount bracket (Dimension- D x W x H - 500 x 600 x 450 mm) as per specification No. WG?NAS/RAK (CSR NO : 1-12-31)

Estimate No. : 121023 / 04 of 2022-23 Providing Fire Fighting , fire detection alram and PA system to Swarajya Rakshak Dharmveer Chhatrapati Sambhaji Maharaj Balidan Sthal,Tulapur Dist. Pune Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 450 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 5.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade),mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP (CSR NO 13-3-1 )

Providing and fixing high-density polyethylene (HDPE) container one piece moulded triple layer water tank made out of high density polyethylene and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity up to 20000 litres. (CSR NO 4-8-7)

Supplying and erecting G.I. pipe ‘C’ class ERW 20 mm dia with necessary fittings complete as per specification no. FF-PP (CSR NO 13-6-1 )

Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification no. FF-PP (CSR NO 13-6-6)

Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings complete as per specification no. FF-PP (CSR NO 13-6-7)

Supplying and erecting 150 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV (CSR NO 13-7-15)

Supplying and erecting 100 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV (CSR NO 13-7-14)

Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV (CSR NO 13-7-20)

Supplying and erecting 100 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV (CSR NO 13-7-24)

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV (CSR NO 13-8-13)

Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG (CSR NO 13-8-14)

Supplying and erecting 20 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV (CSR NO 13-7-21)

Supplying and erecting gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV (CSR No 13-7-34)

Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification no. FF-FFA/HV (CSR No 13-8-2)

Supplying and erecting M.S./CRCA cabinet for housing single hydrant valve of size ( 400 x 400 x 400)mm or hose pipe box of size ( 600 x 600 x 200)mm made from min. 1.5 mm thick CRCA sheet with angle iron work of min. of size (25 x 25 x 4) mm having front doors with viewing glass of size (200x150) mm and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5) (CSR No 13-8-18)

Supplying and erecting gun metal branch pipe of 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specification no. FF?FFA/NZ (CSR No 13-8-7)

Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL (CSR No 13-8-4)

Supplying & erecting Float sensor switch for water level controller working on 250V & rated current 8A, with 2 mtr. wire & High quality of wire & plastic body. (CSR No 12-4-28)

Supplying & erecting automatic control panel for 3 Ph, 415 volt, /centrifugal pump set up to 10 - 15 HP consisting of Star Delta starter having relay range 13- 22 Amp, S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc. (BOOSTER PUMP DB # 01 & 02) (CSR No 12-4-27)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR No 7-2-17)

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. (CSR NO - 9-2-3)

Supplying, installing, testing and commissioning FR, XLPE armoured cable 4 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB LT/CU ( CSR No 13-9-11 )

Supply & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wallcomplete. (CSR No 13-15-1 )

Providing Round bottom fire bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook complete. (NON CSR)

Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. (CSR NO- 6-1-1)

Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps). (CSR NO -16-3-5)

Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 2 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF-AFAS/CP. (CSR No 13-10-2 New)

Supplying, installing, testing and commissioning of repeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel size shall not more than 175 x 275 x 65 mm conforming to EN 54 or UL approved with 3 years equipment replacement warranty FF-AFAS/RP (CSR No 13-10-5 )

Supplying, installing, testing and commissioning of intelligent addressable thermal/ heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from - 20°C to 38 °C for fixed-heat and rate-of-rise type detectors whereas 0°C to 90°C for highheat type detectors, in built isolation mode, suitable for industrial/ kitchen/ boiler room etc. with 3 years equipment replacement warranty, IS : 2175-1988 reaffirmed 2000, IS 15908:2021 standards FF-AFAS/SD. (CSR No 13-10-8 (New))

Supplying, erecting testing and commissioning optical type smoke detector on suitable back box with necessary connections complete as per specification no. FF-FAS/SD (CSR NO - 13-9-3)

Supplying, erecting testing and commissioning manual call point (Pill box) with break glass, push button (resettable type) in metal enclosure complete as per specification no. FF-FAAS/MCP (CSR No 13-9-6 )

Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty FF-AFAS/SSH. (CSR NO 13-10-13 )

Supplying, installing, testing and commissioning remote response indicators suitable to operate on 5 - 28 V dc supply having FR Polymer ABS Housing complete as per specification no. FF-FAAS/RRI ( CSR NO 13-9-9 )

Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 reed relays, EN 54 or UL Listed FF-AFAS/CRM ( CSR NO 13-10-10(New) )

Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/MM ( CSR NO 13-10-11 (New) )

Supplying, installing, testing and commissioning of addressable fire isolator module complete as required. EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/ISM ( CSR NO 13-10-12 (New) )

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR No 7-2-8)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 4 sq mm copper conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR No 7-2-9)

Supplying, erecting, testing and commissioning 15 to 30 Watts sound column or ceiling mounted complete as per specification no. FF-PA/SOCpplying, erecting, testing and commissioning 15 to 30 Watts sound ( CSR No 13-11-2 )

30W Horn separate with excellent speech reproduction; Rate shall be including with Speakers with mounting base suitable junction boxes, cable-glands, lugs, and Termination with required all other accessories, The speakers shall be of same make as that of the Control Panel & Amplifiers. Rate shall be including all other required accessories and complete as per guideline & site condition. The loudspeaker shall have built-in protection to ensure that, in the event of a fire, damage to the loudspeaker does not result in failure of the circuit to which it is connected. In this way, system integrity shall be maintained; ensuring loudspeakers in other areas can still be used to inform people of the situation. The loudspeaker shall have ceramic terminal blocks, thermal fuse, and heat-resistant, high temperature wiring. 30W Horn speaker with excellent speech reproduction Max Power: 45 W, Rated Power: 30 Watts Effective frequency range (-10 dB) :490 Hz to 4500 Hz SPL at rated power (1Khz at 1 m) 115 dB Opening Angle 1 KHz /4 KHz (-6 dB):112 (H) /85 (V) IP rating: - IP 65 (Non CSR)

Supplying, erecting, testing and commissioning stand mounted/handheld type wired microphone having 2 mV/Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with min. 7 metre shielded cable and 3 Pin Professional XLR Connector, stereo jack complete as per specification no. FF-PA/MIC (CSR No 13-11-3)

Supplying, erecting, testing and commissioning rust free microphone table stand of chrome plating/powder coating or S.S. material, up to 500 mm height and suitable basefor sturdy mechanism ensuring trouble free movement complete.plying, erecting, testing and commissioning rust free microphone table (CSR No 13-11-5)

Supplying, erecting, testing and commissioning 120 W amplifier suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply complete as per specification no. FF-PA/AFR (CSR No 13-11-1)

SITC of EN-54 Certified EVAC PA controller with minimum 4 zones in the system and expandable up to 6 zones with 14x 4 Audio matrix with full DSP functionality. 8 audio inputs, 4 audio outputs, 4 channel output matrix. Shall support the following: single line switching or redundant group A/B switching, amplifier redundancy, 4 x 100V audio inputs and 12 speaker line outputs. 8000 fault, warning, and event conditions log. Built in message manager for 100 emergency/business calls up to 85 minutes. 10 control inputs and 13 control outputs. Impedance measurement and Pilot Tone supervision for speaker line monitoring. Frequency response (ref. 1 kHz) 20 Hz to 20 kHz (-0.5 dB), Signal-to-noise ratio (A-weighted): Line in to line out: 106 dB typical, THD+N < 0.05%, Crosstalk (line level) Line in to line out (0 dB gain): < 100 dB at 1 kHz, Sample rate 48 kHz, DSP processing resolution 24-bit linear A/D and D/A conversion, 48-bit processing. Should be provided with a Configuration and Graphics User Interface Software. Audio inputs (100 V): AMP IN: 2 ✕ 6-pin port; Max. voltage - 120 V; • Max. power - 500 W; PVA-4CR12; Component :1) PVA-4CR12 2) CAN terminating resistor (120 ohm) 3) Foot stand (self-adhesive) 3) Operation manual 4) Important safety instructions. Rate shall be including all other required accessories and complete as per guideline & site condition. (NON CSR )

Supplying, erecting, testing and commissioning of 2 core shielded cable complete as per specification no. FF-PA/MCC (CSR No 13-11-6)

Supplying, erecting, testing and commissioning of 1.5 sq. mm speaker wire complete. (CSR No 13-11-10)

Supplying & erecting FRP box of size 150mm x 125mm x 100 mm, 2.7 mm thick complete on pole/wall as per specification No. CB-SB (CSR No 7-8-8)

Estimate No. : 121023 / 05 of 2022-23 Providing HT Electrification to Swarajya Rakshak Dharmveer Chattrapati Sambhaji Balidan Sthal - Tulapur Dist. Pune Supplying, erecting, testing and commissioning 22 KV HT metering cubical (compact / vertical type) approved by MSEDCL / licensee fabricated with 2mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating /epoxy paint of required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 Each. CT having required ratio between 50/5A to 200/5A, VA 10 or 15, Class 0.2S, epoxy casted 3 Each. PT having ratio 11000/V3/110/V3 VA 50, Class 0.2suitable for provided trivector meter, and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation. (CSR No : 6-4-2)

Supplying and erecting rolled steel joist (girder) pole 150 x 80 mm/150 x75 mm (14.9 kg /m) with base plate in provided foundation as per specification no. OH-PL/RSJ (CSR No 8-1-11)

Supplying & erecting pole bracket fabricated from ISM channel of size 75x40x6mm, 1100mm long for necessary Each. of provided insulators and welded with extension channel pieces of same size 300 mm in length and erectingon pole with 50x6mm clamp complete as per specification no. OH-PL/BKT (CSR No 8-3-10 )

Supplying and erecting porcelain disc type insulator 70KN with necessary hardware suitable for 22kV line, complete as per specification no. OH-INS/DI (CSR No 8-5-7 )

Supplying and erecting porcelain post type insulator with nut bolts suitable for 22kV line, complete as per specification no. OH-INS/PST (CSR No 8-5-13)

Supplying and erecting 22 kV outdoor type gang operated air break, triple pole switch 200 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp (CSR No 10-6-3)

Supplying and erecting, 22 kV outdoor type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15A capacity complete erected on provided cross arm (CSR No 10-6-6)

Supplying and erecting G.I. stay set for poles, including loop insulators at inaccessible height with anchor plate 300x300x6mm., straining screws, G.l. stay wire 7/10 SWG, G.l. stay rod 20mmx1.8m length and pole clamps duly erected in provided cement concrete foundation complete. (CSR No 8-6-1)

Supplying and erecting ACSR conductor of size 6/1-2.11 mm complete. (squirrel) (85kg/km) as per specification No. OH - CON/ACSR . (CSR No 8-4-6)

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. (CSR No 9-2-3)

Supplying and erecting pole clamp made from 50x10mm MS flat for pole or pipe, post erected with 15mm bolts and nuts duly painted with one coat of red oxide and two coats of aluminium paint complete. (CSR No 8-6-11)

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no.EA-EP (CSR No 9-1-4)

Supplying, installing, testing and commissioning SF 6 Insulated 22kV, 630A, 16kA/3sec, 1 way outdoor, extensible motorised SCADA compatible RMU, internal arc tested as per electric supply company specification consisting of 1 no. feeder with 1 VCB compliant to IEC 62271 -100, 200 and 102, as per specification no. SW-HTS/RMU SCADA (CSR No 5-9-22)

Supplying, installing, testing & commissioning 3 phase, 22/0.433 kV, 50 Hz., 400 kVA, Mineral oil immersed and naturally cooled outdoor type, Copper wound Non-sealed transformer delta/star connected with additional neutral brought out on load side, temperature rise should not exceed 45℃ by thermometer in oil and 50℃ by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) with HV tapping (with off load tap changer) off Load +5 to -10 in steps of 2.5%, having 7 number of tap positions with standard accessories complete with test certificate with losses below 1286 Watts at 50% load, 3623 Watts at 100% load as per IS:1180 (part 1) : 2014 with necessary permissions of Electrical Inspector, as per specification no SS- TR-NSL (CSR No 10-1-19 (NEW))

Supplying, erecting, testing and commissioning of diesel generating set with alternator of 380/400 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 65.5 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 450 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG (CSR No 11-1-20)

DG Exhaust pipe sitc of 150 mm class B black pipe with bends and other accessories as required with Thermal insulation with 100 mm thick rock wool and cladded with 0.6 mm AL foil for 150mmm dia (Non CSR )

Supplying , erecting & terminating XLPE insulated galvanised steel formed wire armoured (strip) cable 22 kV(E), 3 x 150 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT (CSR No 7-3-18)

Providing and erecting Heat shrinkable indoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT (CSR No 7-5-13)

Providing and erecting Heat shrinkable outdoor termination kit for 11 kV (UE)/ 22 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT (CSR No 7-5-16)

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP (CSR NO 9-1-3)

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP (CSR NO 9-1-2)

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA EP. (CSR NO 9-2-7)

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP. (CSR NO 9-2-8)

Supplying & erecting cast iron cable indicator plate buried along with route of cable for PVC / XLPE armoured cable as per specification No. CB-CIP (CSR NO 7-8-1)

Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution, etc. (All above contents shall be of standard makes) (CSR NO 10-6-24)

Estimate No. : 121023 / 06 of 2022-23 Providing Solar PV Generation to Swarajya Rakshak Dharmveer Chhatrapti Sambhaji Maharaj Balidan Sthal - TULAPUR Dist. Pune Supplying, installing, testing and commissioning of 100 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X300 Each.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate,canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB ,MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card / chip for 5 years including net charges for RMS System, complete up to net meter Installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG. (CSR Item - 4-5-7)

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authorStructural Steel for Panel size (2.1 x 1.2)Mtr and 300 Each CSR Item 6-1-19

Supplying and installation of Solar PV Module cleaning unit consisting of nozzles spray, necessary pipes, valves, post, electronic panel board concealed with weather proof cabinet, spreading water periodically for removal of dust, related motor pump, controller, timer and nozzles set suitable for covering 5 KW Solar PV Module. (Approx. 35 Sq. Mtr. PV Module area). (CSR No 4-8-8)

Providing and fixing high-density polyethylene (HDPE) container one piece moulded triple layer water tank made out of high density polyethylene and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity up to 20000 litres. (CSR - 4-8-7)

Supplying erecting testing and commissioning cubicle pattern electrical control panel (Solar Power evacuation Panel (100 Kwp System) as per SLD) made of 14 /16 / 18 / 20SWG MS Sheet IP 54 rated duly painted with 2 coats of enamel paint comprising of the following 63 A FP MCB 5 Each as and 200 Amp FP MCCB 1 no as outgoing (Refer : - Annexure Sheet - 100 - ECP)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 120 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (Cable from Invertor to Solar Power evacuation Panel) (CSR - 7-1-16 )

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 400 mm width & 75 mm height complete with necessary coupler plates & hardware. (CSR - 7-11-9)

Supplying and erecting LT CT multifunction DLMS compliance energymeter of accuracy of class 0.5 , 3x240V,50 Hz with optical & RS 232 port,backlit LCD, measure & display trivector energy, load survey, TOD, tamper detection & logging, power ON /OFF events, instantaneous parameters of rating 1/5 A with display in absence of power complete with zero adjustment & test certificate from manufacturer erected on provided M.S. box and connected to CTs. (CSR No 6-3-5)

Estimate Each. : 121023 / 7 of 2022-23 Providing Lift to Swarajya rakshak Dharmveer Chhatarpati Sambhaji Maharaj Smruti Sthal,Tulapur Dist. PuneSITC of Electric Traction Passenger Lift with Rated capacity :- 13 Passenger/884Kg · Floors :- G+1 floor (2 Stops/2 Landings) · Travel :- 3 to 4.2 mtrs. · Location of Lift Machine:- MR/MRL ·Rated speed :- 1.0mps VS· Car/Landing door clear opening of 900/1000 mm wide x 2000 mm High· Clear Car size of 2000 mm wide x 1100mm deep x 2250mm high · Lift shaft available having clear size of 2250 mm wide x 3120 mm deep,1200 mm Pit depth, ………mm Overhead. Doors type :- COPO/TOPO Doors with frame made from SS 304 gradesolid(Eachn-cladded) sheet of 1.5mm thick in hairline finish for car and all landingdoors with SS door architraves/frames The lift doors shall have minimum 1hour fire rating (with submission of necessary valid test certificate issuedby NABL accredited or Independent test laboratory).· Lift car enclosure made from SS 304 grade solid (Eachn-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing ofadequate size with minimum safety factor of 5, with Toe Guard Apron, withnecessary false ceiling with adequate LED lights, blower/fan for ventilation & SSchequered plate flooring, handrails, mirror, emergency light etc. The lift carinterior design shall be done as per the directions of engineer in charge.·COP with SS face plate having metallic push buttons with Braille code &lumiEachus indicator around button with FPI, scrolling UP/DN LED indicator &with / without attendant key switch, OWD with audio-visual alarm, VAS inMarathi, Hindi & English with intercom system with telephone instrument in Liftcar, LMR & FCC/ground floor.· LOP with SS face plate having recess/surface push button box for alllandings with scrolling UP/DN LED indicator having metallic push buttons withBraille code & lumiEachus indicator around button with CPI, Lift car arrival & nexttravel direction audio-visual indication at all landings.· Lift controller based on microprocessor/ PLC with VVVF Drive havingclosed loop control system, with IBMS compatible having necessary port. Thecontroller shall have necessary protections such as overcurrent, overvoltage, overspeed, overheat for all devices including lift motor and travel directionprotection, protection for phase loss at input or output etc. various operationmodes such as maintenance, change direction by attendant, full load bypass, VIPcall operation, self levelling operation, call cancel facility, auto return to homelanding, fireman evacuation operation, earthquake operation, door open/closeoperation from COP etc. The system can record information for minimum 30latest faults, with real-time clock management and handheld keypad with LCDscreen for view and setting of parameters, The control panel duly wired withproper size & strength, copper wire for power & control circuit, with provisionfor addition of floor/control card & allied accessories control panel havingenclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class. · ARD complete with necessary SMF VRLA batteries.· Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2 Eachs minimum 2.0MP FHD IPbased vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimedon Lift machinery & controller with NVR kept in LMR/FCC with HDR databackup for min. 90 days with min. 18” FHD TV monitor, to be kept inFCC/LMR as directed by Engineer In Charge.· Lift Machine of Gearless PMSM of suitable kW with duty cycle ofminimum 120 starts/hr (with submission of necessary valid test certificate issuedby NABL accredited or Independent test laboratory), with Traction pulley, SG,electromagnetic brakes, entire assembly mounted on adequate size girders dulyfixed on LMR floor/ shaft walls complete with main/diverter traction sheaves,suspension wire ropes/belts of adequate size & strength.· Other mechanical parts such as 'T' section adequate size guide rails for car &counter weight with brackets fasteners, counter weight frame with necessaryblocks, buffers with necessary support arrangement, MS pit ladder etc. erectedwith necessary steel work. MiEachr civil work such as alteration work if any necessary for erection oflanding door frames and it's accessories e.g. sill, header, hole pass etc completewith plaster finish, civil work for erection buffers, erection of lift machinery,adequate size core cuts if required & scaffolding for erecting guide rails, providingand fixing steel girders/RCC work having adequate strength for mounting andhoisting lift machine etc. complete as per specification Each. LFT.· General: - Job includes entire procedure of obtaining all necessary erectionpermissions & "License to Work the Lift" from Electrical Inspector(Lifts) withsubmission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the dateof commissioning.(CSR Each - 17-1-5)

Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification Each. SW-SWR/MCB (CSR Each - 5-3-13)

Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f.>0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver,IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.Supplying and erecting electronic type driver for indoor LED 25W-40W fixture (CSR Each 2-1-15)

Point wiring in for light/fan/bell in 20 mm metal conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification Each: WG-PW/SWsuitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%. (CSR Each -1-7-1)

Point wiring for independent plug in 20 mm metal conduit with 1.5 sq.m (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification Each: WG-PW/SWFor Shaft (CSR Each -1-7-2)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification Each. CB-LT/CU (CSR Each -7-2-31)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification Each. CB-LT/CU (CSR Each -7-2-8)

Supplying, erecting & marking DPMCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification Each. SW-SWR/MCB (CSR Each -5-3-7)

Supplying, fixing and commissioning 2 pole, RCBO 6/10/16/20/25A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification Each SW-RCCB/RCBO (CSR Each -5-6-9)

Supplying, fixing and commissioning 4 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification Each SW-RCCB/RCBO (CSR Each -5-6-13)

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron /GI frame. (CSR Each -5-4-13)

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. (CSR Each -1-6-1)

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete (CSR Each -1-6-10)

Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected.Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected. (CSR Each -1-6-29)

Supplying and erecting Ceiling rose / Batten holder / Slanting holder /hanging cord switch / hanging bell push / pendant holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box. (CSR Each -1-5-7)

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification Each. EA-EP (CSR Each -9-1-2)

Supplying and erecting annealed bare copper wire of high purity of required sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws complete. (CSR Each -9-2-4)

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly (CSR Each -6-1-19) painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. (CSR Each -6-1-19)

Sub Estimate No. 123023/08 of 2022-23 Providing HVAC System to Swarajyarakshak Dharmaveer Chhatrapatee Sambhaji Maharaj Balidan Sthal, Tulapur, Tal. Haveli Dist. Pune. Supplying, erecting, testing and commissioning 12 HP, VRF / VRF air conditioning system, out door unit (ODU) type-IV OEM standards working on HFCfree refrigerant R410A or other required/ suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celcius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 meter operation in cooling mode with inverter based VRF/VRF technology microprocessor based control compressor starter / control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil seperator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V + 10%, 50 Hz, 3 phase power supply, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinate on provided angle iron frame or suitable foundation connected to the system in approved manner complete. (CSR No. 3-11-4)

Supplying, erecting, testing and commissioning 14 HP, VRF / VRF air conditioning system, out door unit (ODU) type-IV OEM standards working on HFCfree refrigerant R410A or other required/ suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celcius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 meter operation in cooling mode with inverter based VRF/VRF technology microprocessor based control compressor starter / control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil seperator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V + 10%, 50 Hz, 3 phase power supply, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinate on provided angle iron frame or suitable foundation connected to the system in approved manner complete. (CSR No. 3-11-5)

Supplying, erecting, testing and commissioning 18 HP, VRF / VRF air conditioning system, out door unit (ODU) type-IV OEM standards working on HFCfree refrigerant R410A or other required/ suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celcius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 meter operation in cooling mode with inverter based VRF/VRF technology microprocessor based control compressor starter / control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil seperator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V + 10%, 50 Hz, 3 phase power supply, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinate on provided angle iron frame or suitable foundation connected to the system in approved manner complete. (CSR No. 3-11-7)

Supplying, erecting, testing and commissioning 20 HP, VRF / VRF air conditioning system, out door unit (ODU) type-IV OEM standards working on HFCfree refrigerant R410A or other required/ suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. celcius and non stop cooling even at 56 deg. celcius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 meter operation in cooling mode with inverter based VRF/VRF technology microprocessor based control compressor starter / control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil seperator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V + 10%, 50 Hz, 3 phase power supply, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinate on provided angle iron frame or suitable foundation connected to the system in approved manner complete. (CSR No. 3-11-8)

Supply, Installation, Testing and Commissioning of VRF/VRV based ceiling suspended 4 way cassette indoor unit (IDU) compact/ standard size of nominal cooling capacity 3.0TR (1100 cfm) to 3.2 TR (1165 cfm) having EER as per BEE standard and specification, suitable as per site requirement with swing louvers and adjustable blades feome sides, indoor unit complete with in-built drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for coastal area complete in all respects, to operate on 1- phase, 230V, 50Hz, AC input supply, consisting with any additional refrigerant and oil charged as per requirement during installation and connected to the system complete. (CSR No. 3-11-22)

Supply, Installation, Testing and Commissioning of VRF/VRV based ceiling suspended 4 way cassette indoor unit (IDU) compact/ standard size of nominal cooling capacity 3.3TR (1165 cfm) to 4.0 TR (1218 cfm) having EER as per BEE standard and specification, suitable as per site requirement with swing louvers and adjustable blades feome sides, indoor unit complete with in-built drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for coastal area complete in all respects, to operate on 1- phase, 230V, 50Hz, AC input supply, consisting with any additional refrigerant and oil charged as per requirement during installation and connected to the system complete. (CSR No. 3-11-23)

supplying and installation of high pressure grade required size copper connection Y or T -joints / refinet for liquid and suction line complete erected on wall / ceiling with supports/ raceways, nitrile rubber insulation, painting etc. with brazing and testing for leakage confirming the normal operation of the VRV/VRF air conditioning system. (CSR No. 3-11-86)

Supplying, erecting, testing and commissioning centralised programmable remote control panel (HMI) touch manager controls minimum 16 system of minimum 64 ODU's can be controlled and up to 992 IDU's can be individually mounted and controlled indoor units having minimum 200 mm size colour LCD touch panel, yearly scheduled, power proportional distribution function, temperature limitation, history function complete erected on wall with an arrangements to integrate with provided fire alarm system. (CSR No. 3-11-79)

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.0TR to 1.2TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC. (CSR No. 3-2-9 (New))

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3TR to 1.6TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC. (CSR No. 3-2-11 (New))

Supplying, installing, testing & commissioning cassette type room Air conditioning unit 4TR to 4.4TR capacity with refrigerant R32/410A 415V, 50 Hz, A.C. supply having 1 no of air handling unit (Mega split) mounting type complete with temperature display on indoor unit, minimum dust filter, noise level maximum 50dBA at position as per specification no. APAC/ WAC. (CSR No. 3-2-22 (New))

Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 12mm complete. (CSR No. 3-2-26 (New))

Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 16mm complete. (CSR No. 3-2-27 (New))

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 12 mm for solar water heater/AC system. (CSR No. 4-2-9)

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 16 mm for solar water heater/AC system. (CSR No 4-2-10)

supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 6.4 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. (CSR No. 3-11-97)

supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. (CSR No. 3-11-96)

supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. (CSR No. 3-11-95)

supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. (CSR No. 3-11-94)

supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. (CSR No. 3-11-93)

supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 22.2 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. (CSR No. 3-11-92)

supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 28.6 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. (CSR No. 3-11-91)

supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 34.9 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. (CSR No. 3-11-90)

supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. (CSR No. 3-11-89)

Supplying and erecting circular flexible / rigid PVC pipe duct of size 100 mm dia, 4 mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc. with sealing complete with provided control/ air flow regulating valves / dampers, filters at position. (CSR No. 3-11-65)

Supplying and erecting an air flow regulating valves / dampers in provided flexible or rigid duct / pipe of 100 mm size with an alteration for existing flexible PVC pipe duct and necessary joints, sealing, coupling, complete at position. (CSR No. 3-11-71)

Supply, installation, testing and commissioning of manually operated, opposed blade, duct mounted, flanged volume control dampers of required sizes in GI construction with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete. (CSR No. 3-11-80)

Supply, installation, testing and commissioning of volume control box with collar for control damper of required sizes in GI construction with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete. (CSR No. 3-11-81)

Supply, fabrication, installation and testing of flexible canvas connections constructed between ductable unit/dampers/ducting of suitable size with fire resist flexible double canvas sleeve complete. (CSR No. 3-11-82)

Providing adhesive thermal insulation for supply return air duct with 19mm nitrile rubber insulation having R-value as per the prevailing provisions in ECBC-2017. (CSR No. 3-11-83)

Supplying & erecting tile type modular diffuser made from aluminium sheet with powder coated matching to the ceiling shade for provided supply and return air complete. (CSR No. 3-11-85)

Supplying and installing of collar damper of galvanised iron material of upto 120 microns for anti corrosive resistance for supply air grill of suitable size. (CSR No. 3-11-87)

Supplying and erecting aluminium powder coated linear grill of suitable size for width length without collar dampers having matching colour with the existing false ceiling and suitable for deflection of 15/30/45°. (CSR No. 3-11-88)

carrying out core cutting of size 3'' to 5'' dia x 15'' length in the c.c./rock/stone wall with help of specialized core cutting machine in proper manner and finishing the site as original. (CSR No. 3-11-77)

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware. (CSR No. 7-11-8)

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware. (CSR No. 7-11-6)

Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware in approved manner. (CSR No. 7-11-11)

Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 300 mm width & 20 mm height complete with necessary hardware in approved manner. (CSR No. 7-11-13)

Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV. (CSR No. 1-3-15)

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON. (CSR No. 1-2-4)

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. (CSR No. 6-1-19)

Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation. (CSR No. 2-10-15)

Supply, Installation, Testing & Commissioning of Floor mounted Double Skin Air Handling Units made out of Alu. Extruded Profile with Thermal Break Profile. The AHU panels fabricated out of 0.6 mm thick Pre-Coated G.I. Sheet with 43 mm / 47 mm PUF Insulated Panel. Blower Section shall consists of statically & dynamically balanced Backward Curved Blower capable of delivering 18,000 CFM of air quantity at 60 mm total static pressure. The cooling coil shall be made out of not less than 27G thick 5/8" dia. copper pipe of 4 row / 6 row deep with 12 fins per inch. with SS 304 Drain Tray. Filter section consists of 10 & 20 micron filters with efficiency down to 90%. Air Handling Unit should provided with LEV kit. (Connection kit between VRF ODU and AHU cooling coil). The outlet of the Air Handling Unit shall be installed with Opposed Blade Aerofoil shape Damper & Motorised Fire damper of 120 Min Rating with actuator suitable to operate on 230 V power supply. The Air Handling Unit Shall have necessary drive set. All the Motors shall be of three phase & IE3 Class. The Air Handling Unit shall be provided with Electrical Starter Panel with VFD & Bypass Arrangement. The VRF & AHU manufacturer should ensure that the coil will not freeze at reduced air quantity upto 30% of the designed flow. The AHUs to be provided with thermal Break profile. AHU to be provided with weather protection canopy on the top of the AHU. The AHU make should have Eurovent certification for construction features & AHRI certification for part load performance. AHU quoted cost shall be inclusive of UVGI system. All hinges & view ports shall have Aller Screws. The AHU noise shall not be more than 60 dB(A) at 1 m distance. AHU shall have Roxtec Cable gland for cable entry. Vendor to refer detailed AHU Data Sheet attached separately. (Non CSR)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 1100 CFM (Fresh Air Fan) (Non CSR)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 400 CFM (Fresh Air Fan) (Non CSR)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 300 CFM (Fresh Air Fan) (Non CSR)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 800 CFM (Exhaust Air Fan) (Non CSR)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 600 CFM (Exhaust Air Fan) (Non CSR)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 500 CFM (Exhaust Air Fan) (Non CSR)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 300 CFM (Exhaust Air Fan) (Non CSR)

Supply, Installation, Testing & Commissioning of Hard PVC condensate drain water piping with necessary clamps, supports, hangers and fitting such as bend, tees, reducers etc. duly insulated with 9 mm thick chemically cross-linked closed cell polyethylene foam. 50 mm Dia. (Non CSR)

Supply, Installation, Testing & Commissioning of Hard PVC condensate drain water piping with necessary clamps, supports, hangers and fitting such as bend, tees, reducers etc. duly insulated with 9 mm thick chemically cross-linked closed cell polyethylene foam. 40 mm Dia. (Non CSR)

Supply, Installation, Testing & Commissioning of Hard PVC condensate drain water piping with necessary clamps, supports, hangers and fitting such as bend, tees, reducers etc. duly insulated with 9 mm thick chemically cross-linked closed cell polyethylene foam. 32 mm Dia. (Non CSR)

Supply, Installation, Testing & Commissioning of Hard PVC condensate drain water piping with necessary clamps, supports, hangers and fitting such as bend, tees, reducers etc. duly insulated with 9 mm thick chemically cross-linked closed cell polyethylene foam. 25 mm Dia. (Non CSR)

Supply, Installation, Testing & Commissioning of Hard UPVC supply water piping using plumbing grade UPVC pipes. The piping shall be properly clamped using saddle & pressure clamps. (50 mm Dia) (Non CSR)

Supply, Installation, Testing & Commissioning of Hard UPVC supply water piping using plumbing grade UPVC pipes. The piping shall be properly clamped using saddle & pressure clamps. (32 mm Dia) (Non CSR)

Supply, Installation, Testing & Commissioning of cast brass ball valves chrome plated ball inside and hard chrome plated ball PTFE (Teflon) seal and ring and chrome plated steel centre handle with female BSP threads as directed by the Engineer-in-Charge .including all taxes, for all leads and lifts, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.)25 mm dia. (Non CSR)

Supply, Installation, Testing & Commissioning of Pressure Balancing valve suitable for 50mm Dia pipe so as to maintain 1kG pressure in the line. (Non CSR)

Supply, Fabrication, Installation & Testing of GI Ducting Factory Fabricated with T.D.Flange as per SMACNA Class-2 with conventional supports of full Threaded GI rods of required size. All Plenums to be made out of 18 G Only. Use of 26G sheets for duct fabrication not permitted). Ducts to be properly sealed along the Joints & Flanges with approved sealant. Ducts to be tested for leakage with Smoke leakage test. Plenums to be fabricated in 18G only. No slip joints allowed.120 GSM zinc coating to consider. The quoted price shall include the cost of minor works like wall opening & closing to run the supply & return ducts. The Pressure testing of sheet metal ducts shall be carried out for complete air distribution system, The testing shall be performed before insulating the ducts as per SMACNA standards. The entire air distribution system shall be balanced to supply the air quantities as required in various zones and rooms to maintain the specified room conditions. Air Balancing of each individual supply air outlet to within +10% or -5% of the design air quantity and tabulating the same in a form of report and also the final air balancing figures shall be indicated against each measured outlets in the as built drawings. Balancing shall also include balancing of return air, supply air and outdoor fresh air quantity. Cost for air balancing before and after the client occupancy shall be considered by vendor, after client occupancy vendor shall monitor and record the air quantity at peak ambient in each terminals for a period of 15 days based on the observations vendor shall redo the air balancing as required. Calibrated air flow hoods shall be used for measuring the air flow across the square diffusers, Grill etc. and Calibrated velocity matric shall be used for measuring return air and calibrated pitot tubes with electronic controller to measure main duct airflow and static pressure. 24 G (Non CSR)

Supply, Fabrication, Installation & Testing of GI Ducting Factory Fabricated with T.D.Flange as per SMACNA Class-2 with conventional supports of full Threaded GI rods of required size. All Plenums to be made out of 18 G Only. Use of 26G sheets for duct fabrication not permitted). Ducts to be properly sealed along the Joints & Flanges with approved sealant. Ducts to be tested for leakage with Smoke leakage test. Plenums to be fabricated in 18G only. No slip joints allowed.120 GSM zinc coating to consider. The quoted price shall include the cost of minor works like wall opening & closing to run the supply & return ducts. The Pressure testing of sheet metal ducts shall be carried out for complete air distribution system, The testing shall be performed before insulating the ducts as per SMACNA standards. The entire air distribution system shall be balanced to supply the air quantities as required in various zones and rooms to maintain the specified room conditions. Air Balancing of each individual supply air outlet to within +10% or -5% of the design air quantity and tabulating the same in a form of report and also the final air balancing figures shall be indicated against each measured outlets in the as built drawings. Balancing shall also include balancing of return air, supply air and outdoor fresh air quantity. Cost for air balancing before and after the client occupancy shall be considered by vendor, after client occupancy vendor shall monitor and record the air quantity at peak ambient in each terminals for a period of 15 days based on the observations vendor shall redo the air balancing as required. Calibrated air flow hoods shall be used for measuring the air flow across the square diffusers, Grill etc. and Calibrated velocity matric shall be used for measuring return air and calibrated pitot tubes with electronic controller to measure main duct airflow and static pressure. 22 G (Non CSR)

Supply,Installation,Testing & Commissioning of 150 mm Disc Valve. PVC / HDPE Material Only. (Ordering by HVAC vendor only after Approval of Technical Specifications & Colour shade of Physical sample by Consultant & Architect). (Non CSR)

Supply, Installation, Testing & Commissioning of Aluminium powder coated Non Vision Type Louvers. (Non CSR)

Supply, Installation, Testing & Commissioning of Acoustic Insulation of duct with 15 mm thick Open Cell Nitrile Rubber with Anti Microbial Treatment & of Class '1' stuck inside the duct using rubber adhesives.(F.M. Approved). Density of 140 - 180 Kg/m3. (Non CSR)

Supply, Installation, Testing & Commissioning of Underdeck Roof insulation with 19 mm thick Nitrile rubber insulation with Aluminium foil on one side. (Non CSR)

Supply, installation, testing and commissioning of UV Coating For Exposed Pipes to Atmosphere . Piping insulation to be covered with Woven Glass Cloth 100 gsm and finished in U/V Treatment. (Non CSR)

Supply & Top of Additional Refrigerant R410A for VRV / VRF System as per Manufacturer requirement. (Non CSR)

Ramacivil India Construction Pvt. Ltd.