SPECIAL REPAIR TO BLDG NO P 536 OF 102 ENGR REGT AT BAIRAGARH 09 SRW UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings including ridge complete all as specified and directed.

Dismantling structural steel work including purlins, tursses, rafters, etc. complete all as specified and directed.

M&L for mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) of Fe-410 Gde E-250 quality B including distance pieces, cleats etc complete all as specified and directed.

M&L for mild steel work of angle iron, flat iron, plates as in brackets, cleats, fastners, wind ties, supports, base for posts etc with riveted, bolted or welded attachment of Fe-410-W (Gde-E-250) quality-A complete all as specified and directed.

M&L for preparation of new or untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of zinc oxide primer complete all as specified and directed.

S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheeting 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, etc; and fixed with self tapping screws complete all as specified and directed.

S&F of pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall and other similar works and fixed with self tapping screws complete all as specified and directed.

Dismantling of wall and celing hard boards, sheets and plywood of any thickness & any position including cover fillets complete all as specified and directed.

M&L for galvanised cold rolled steel section frame work of grid size 600x600mm using 24 x 38 x 0.50mm (composite thickness) & tee (bottom pre-coated) and 24 x 24 x 0.50mm (composite thickness) wall angle of galvanised cold rolled steel sections including suspenders as per manufacturer instructions as in false ceiling complete all as specified and directed. Make: GAPSON (Gabsec) or equivalent as approved by the GE.

M&L for mineral fibre grid ceiling of size 600 x 600 x 4mm thick decorative type, fire & moisture resistant and tested as per IS 14862-2000, fixed to steel frame work as in ceiling with and including applying two coats of oil bound distemper complete all as specified and directed.

M&L for brick work with fly ash modular size bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on brick/concrete surfaces, finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of cement based putty complete all as specified and as directed. Note: Putty shall be measured and paid for seperately under respective item.

M&L for applying a coat of 2mm thick white wall care putty on walls, finished even and smooth complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and then applying a coat of exterior weather proof water base emulsion paint complete all as specified and directed.

Demolition of cement concrete in ground floor (unreinforced) n exc 15 cm thick (below or above GL) complete all as specified and directed.

M&L for hardcore of broken stone or boulders of guage exc 63mm but n exc 100mm, deposited, spread and levelled in layers n exc 15cm thick, watered and well rammed /rolled to a true surface complete all as specified and directed.

M&L for cement concrete 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundations, fillings and mass concrete complete all as specified and directed.

M&L for mild steel TMT bars 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hookings ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for cement concrete work in pavement/hard-standing of flexural strength 40 Kg per square centimetre in field using 400 Kgs of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and directed.

M&L for forming 12mm thick, 100mm depth expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade 'A' complete all as specified and directed.

M&L for forming contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all as specified and directed.

Supply only metallic floor hardener mixed in cement concrete as per manufacturers instruction complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for concealed point wiring with 1.50 sqmm (nominal area), FRLS PVC insulated, unsheathed, single core multi-stranded copper conductor cable, 1100 volts grade, drawn through and including concealed medium grade PVC conduit not less than 20 mm dia, ISI marked, with all accessories (PVC casing and caping of size 25 mm, ISI marked with complete accessories to be used wherever wiring to be run on ceilings and concrete surfaces) including one run of 1.5 sqmm FRLS multi stranded copper conductor (Green colour cable) as earth continuity wire connected to common earth dolly including modular galvanized sunk sheet steel terminal box concealed in wall for fixing of switches, sockets and fan regulators etc, complete all as specified and directed for the followings:-

(a) One light /Fan/Exhaust/bell point controlled by one switch.

(b) One 3 pin socket outlet 5 Amps on independent board.

(c) One 3 pin socket outlet on same board.

All as per item No. 2 here-in-before but wiring with 2.5 Sq mm FRLS multi-stranded copper conductor cable for 5/15 amp switch socket on independent board and with 2 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete.

All as per item No.2 here-in-before but wiring with 4.0 Sq mm FRLS mutistranded copper conductor cable for 5/15 amp switch socket combination on independent board and with 4.0 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete.

S&F of modular switch 1 way, 5 A, 1 module, 240 Volts and fixed complete all as specified and directed.

S&F of modular socket, 6 A, 2/3 pin, combined 2 module, 240 Volts and fixed complete all as specified and directed.

S&F of modular socket 6A/16A, 2/3 pin combined, 2 module, 240 Volts and fixed complete all as specified and directed.

S&F of modular switch, 1 way, 16 A, 1 module, 240 Volts and fixed complete all as specified and directed.

S&F of ceiling rose surface bakelite 65mm dia three terminal complete all as specified and directed .

S&F of LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

S&F of 600mm sweep heavy duty wall fan metal body and fixed to wall with screws and making connection with 1 sqmm, 3 core copper conductor cable complete all as specified and directed.

S&F in replacement LED tube light fitting 1 x 20 Watt, 220 V, AC decorative box type with driver, holder including making connection with 1 Sqmm flexible copper conductor cable 3 core of suitable size from ceiling rose complete all as specified and directed.

S&F in replacement sheet metal enclosure for MCB, DB, VTPN 415 Volts, 200 Amps rated busbar 4 way double door, factory made conforming to IS:13032 fabricated out of CRCA sheet not less than 1.2mm thick fitted with DIN channel, neutral link complete all as specified and directed.

S&F of MCB, TPN, 63 Amps, 415 Volts, 'C' Curve, breaking capacity 10 KA including making connection complete all as specified and directed.

S&F of MCB single pole, 6 to 32 Amps, 240 Volts, 10 KA breaking capacity, 'B' Curve and making connections complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground vertically at a depth not less than 2.25 m and top edge of plate at a depth not less than 1.50 m below GL, connected to earthing lead of galvanized steel wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised steel from earth plate to test oint upto 7.5m including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 15 mm dia GI pipe medium grade for watering, 15 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing compelete all as specified and directed.

S&F of integral LED street light luminaire, 60 W, comprising of pressure die cast housing with epoxy powder coated dark graphite grey colour finish, prismatic polycarbonate cover with individual LED lenses with IP 65 protection and all fixing arangement, nuts, bolts and washer and making connection with 2.5 sqmm, 2 core PVC copper conductor cable of required length from light fitting to street light control box on pole complete all as specified and directed.

Excavation in trenches in hard/dense soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out for foundation, laying under ground cables, hard standing etc complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed.

Removing of surplus excavated materials to a distance not exc. 50 Mtr away and depositing where directed at a level not exc. 1.50 mtr above the starting point complete all as specified and directed.

M&L for dry sand cushioning in trenches for protection of UG cables (below, above and around the cable) and consolidated (punned) complete all as specified and directed. Note: Punned thickeness of sand will be measured for payment purpose.

M&L for brick Sub Class 'B' locally available best quality laid in trenches above sand cushioning for cable protection complete all as specified.

S&F in replacement of XLPE cable 1100 Volts grade, heavy duty of cross-sectional area 25 Sqmm, 3.5 core with aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel strip and overall PVC sheathed, laid in trenches/floor or fixed on wall/pole and connecting complete all as specified and directed.

S&F of GI tubes, 'light grade' galvanised with all fittings, laid in floors, under road, pavement or hard standing of 25 mm bore complete all as specified and directed.

S&F of white cover plate with frame, 2 module and fixed complete all as specified and directed.

S&F of white cover plate with frame, 4 module and fixed complete all as specified and directed.

S&F of white cover plate with frame, 6 module and fixed complete all as specified and directed.

S&F of white cover plate with frame, 8 module and fixed complete all as specified and directed.

Deduct Schedule of credit (calculation will be done off line) Rs. 33961.00

M/S Shanti Traders

PADAMSHRI CONSTRUCTION CO

sachinder singh

AJIT ENTERPRISES

RAJPATI CONSTRUCTION

M/s VIKAS TRADERS

M/s KGN Builders

M/S Shanti Enterprises

CREATIVE CONSTRUCTION

Makewell Enterprises