EEWS/KMC/GRWW/DEV30/25-26

Supplying of 1.1 KV. Grade PVC insulated Conductor of following cables (make: Polycab/ Gloster/Havells/):Size in Sq. mm, No & dia. of wire in mm , No of Core - 35 7/2.50 4

Supplying of 1.1 KV. Grade PVC insulated Conductor of following cables (make: Polycab/ Gloster/Havells/):Size in Sq. mm, No & dia. of wire in mm , No of Core - 16 7/1.70 4

Laying through Underground Trech.(a)Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Laying through Floor/ Pavement/Wall.Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish.(i)From 2.5 sqmm to 35

Supply of G. I. pipes of TATA make including necessary sockets (f) 50 mm dia. (ii) Medium quality

abour for fitting and fixing G.I. pipes for under ground work including cost of jointing materials, cutting pipes,making threads etc. complete in all respect including cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed with two coats of painting to G.I. pipes and specials with bituminous paint. (Payment will be made on the centre line measurement of the total pipeline including specials. Payment of painting to be paid seperately.) (vi) 50 mm dia.

upplying & Erection of medium size feeder pillar box of Size (1200 x 750 x 450 mm) made up of 2 mm thick MS Plate along with suitable M.S. Angle. The P.B. have double hinge door at the front & back with suitable locking arrangement. The box will be painted by 2 cores of aluminiam paint over 1 coat of red oxide paint. Suitable arrangement should be provided for fixing of Timer unit, fuse unit & other accessories. Leg of the pillar box will be 900 mm in length by made up of (35 x 35 x 3 mm MS Angle with suitable base Plate. Legs of the Pillar box will be erected at 300 mm below the ground level with cement concrete (6:3:1). Rest portion coverd by 5" Brick Wall with plastering & net cement & bottom portion filled with silver sand as drawing & direction of E.I.C

Compression Glands.Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring FOR dust & moisture(proof entry of XLPE/PVC armoured cables as below : FOR 4 core.(vi)upto 35 sqmm

Compression Glands.Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring FOR dust & moisture(proof entry of XLPE/PVC armoured cables as below : FOR 4 core.(iv)upto 16 sqmm

Finishing cable ends.(b)Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.3... core 35 sqmm cable

Finishing cable ends.(b)Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.(4 core 16 sqmm cable

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection Legrand FP 63 A

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection STANDARD 6-32A DP

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection STANDARD 6-32A TP

Bus-Bar Chambers : Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required ... ( As per Drawing no. 470 of PWD Specification Book ... May 1991) ) Rate / Mt.of completechamber 4 bars 415 V, 63 A 4 x 20x5mm-Dimension ofAl. bars[85mm long 500x150mm-Dimension ofSheet MetalBox

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection Legrand 6-32 A FP

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes FOR Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall FOR housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works 12 Module

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes FOR Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall FOR housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works 4 Module

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes FOR Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall FOR housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works 8 Module

Supply & Fixing 240 V 6 A Modular type switch brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required

Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket brand(approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket brand(approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25A Modular type socket, 25 A, Modular type starter brand(approved by EIC) with 25A Modular switch type DP MCB(c-curve) and 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V, 25A Modular switch type SP MCB(c-curve) brand(approved by EIC) on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Fittings :Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board

Supply & Fixing 240V, Modular Socket (2) Module) type fan regulator (Step type) brand(approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection FOR exhaust of following diameter:30 cm (12") dia

Supply & Fixing RJ45 sitable FOR CAT6 cable brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections & testing as required

Fittings :Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.

S/F of special head type M S loop box (3 mm thick) with connecting bar and other accessories fixed on the top the pole as required and as per direction of Engineer-In-Charge. For 3 phase connection.

S/F single arm projected lamp bracket (Single pipe bending) of 50cm(2") diaG.I. pipe(ISI medium) 3.65 mm thick of 2.1 mtr (6' approx) long having 105 degree curvature with reducing socket to be fitted at the top of the pole with bolts, nuts, clamps etc. as required.

Wiring With PVC Insulated & Unsheathed Single Core Stranded Copper Wire `'FR' ... in PVC Casing-Capping (Precision Make) on wall/ceiling.Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand(approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire brand approved by EIC) in 25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required4 x 56/0.3 (4 sqmm) + 2 x 36/0.3 (2.5 sqmm) ECC

SUPPLYING OF APPROVED MAKE HIGH SPEED CEILING FAN (ISI MARKED) OF FOLLOWING SIZES HAVING DOUBLE BELL BEARING COMPLETE WITH STANDARD DOWN ROD, CANOPY HANGING SHACKLE, ALUMINUM BLADES, WITHOUTREGULATOR, A.C 230-250 VOLT. 900MM/1050MM/1200MM

SUPPLYING OF APPROVED MAKE EXHAUST FAN HEAVY DUTYWITH MOUNTING FRAME, BLADES AC230-250,300MM SWEEP RPM 900/1400(12??)

SUPPLY AND FIXING OF PHILIPS SMARTBRITE XTRA 4 FT RUN LENGTH LED BATTEN TUBE LIGHT ,INCL FIXING ONLY FLUORESCENT LIGHT FITTING SUSPENDED 25 CM BELLOW THE CEILING WITH 2 NO . 20MM DIA EI CONDUIT (14 SWG )SUPPORTS INCL.S&F EI CONDUIT , BALL SOKET/ SOKET TYPE CELLING PLATE AND CONNECTING THE LENGTH OF PVC INSULATED WIRE AND PAINTING ETC. AS REQUIRED BY 2*24/0.20 MM (1.5 SQMM) FLEXIBLE COPPER WIRE OF 1.10MT.LENGTH. MAKE CROMPTON, 18W ITEM NO-5.3F.4.0.2

SUPPLY OF DIFFERENT TYPES OF LED LAMPS (9W) MAKE:PHILIPS 9.0 WATT , BASE B22/E27,825 LM.ITEM

SUPPLY AND FIXING OF SMART BRIGHT ESSENTIAL STREET LIGHT (70 WATT) COMPLETE WITH ALL ACCESSORIES TO BE FIXED/PROJECTED FROM THE WALL OF THE BUILDING OR ON POLE INCL .MAKING HOLES/PROVIDING CLAMPING ARRANGEMENT& NECY. GI REDUCER AS REQUIRED. S&F 40 MM GI PIPE (ISI- MEDIUM) QUALITY 1.5 MTS .AVERAGE LENGTHHAVING SUITABLE BEND S&F NECY. LENGTH OF 1.5 SQMM PVC INSULATED SINGLE CORE STRANDED ANNEALED COPPER WIRE AND MAKING CONNECTIONS AS REQUIRED AND MENDING GOOD DAMAGES TO WALL INCL. PAINTING ETCMAKE: BAJAJ 70 WATT

SUPPLY AND FIXING OF GREENLINE V2 STREET LIGHT (115WATT) COMPLETE WITH ALL ACCESSORIES TO BE FIXED/PROJECTED FROM THE WALL OF THE BUILDING OR ON POLE INCL. MAKING HOLES/PROVIDING CLAMPING ARRANGEMENT & NECY. GL REDUCER AS REQUIRED. S&F 40 MM GI PIPE (ISI-MEDIUM) QUALITY 1.5 MTS. AVERAGE LENGTH HAVING SUITABLE HEND S&F NECY. LENGTH OF 1.5 SQMM PVC INSULATED SINGLE CORE STRANDED ANNEALED COPPER WIRE AND MAKING CONNECTIONS AS REQUIRED AND MENDING GOOD DAMAGES TO WALL INCL. PAINTING ETC. MAKE: CROMPTON 120WATT

Soil Excavation.Excavation of soil FOR installation of Earth Electrode and filling & ramming.FOR Soft Soil.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (HOT Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:(b)By TATA(Medium GI pipe

Sub Total