Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.7 LAccepted-AOC B 3 3 DHANALAXMI PARK OPP PMT BUS DEPOT BHUSARI COLONY PAUD ROAD KOTHRUD PUNE 411 038 | PUNE | PUNE | MAHARASHTRA | 411038 | L1 | Accepted-AOC Awarded as first lowest bidder (L1) | |
| 2 | L2₹42.3 L+₹1.2 L (3.02%)Rejected-AOC 24 25 MANGAL ARCADE TELCO ROAD OPP HOTEL DOUBLE TREE MOHAN NAGAR CHINCHWAD PUNE 411019 | PUNE | MAHARASHTRA | 411019 | L2 | Rejected-AOC Being second lowest bidder (L2) | |
| 3 | L3₹42.9 L+₹1.8 L (4.50%)Rejected-AOC SHOP NO 259 LOHOGAON ROAD KALWAD KHANDVE NAGAR PUNE 411032 | PUNE | MAHARASHTRA | 411032 | L3 | Rejected-AOC Being third lowest bidder (L3) | |
| 4 | L4₹44.1 L+₹3.1 L (7.48%)Rejected-AOC | L4 | Rejected-AOC Being forth lowest bidder (L4) | |
| 5 | L5₹47.0 L+₹6.0 L (14.6%)Rejected-AOC | L5 | Rejected-AOC Being fifth lowest bidder (L5) |
Tender Value
Refer Docs
EMD Value
₹90,400
Closing Date
23 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GERD PASHAN PUNE
GERD PASHAN PUNE
PROVISION OF CERTAIN E M SANCTIONED WORK AT HEMRL UNDER AOR OF GERD PASHAN
2022_MES_521006_1
GERD/PSN/TOKEN/04 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
GERD PASHAN PUNE
As per tender documents
9 documents required · 9 mandatory
₹500
GERD PASHAN PUNE
₹90,400
Yes
15 Jul 2022
29 Apr 2022
28 May 2022
30 Apr 2022
23 May 2022
15 May 2022
30 Apr 2022 - 14 May 2022
60 days
Amount
Supply and fix air termination single pointed aluminium rod of 12mm dia 300mm long complete all as specified and directed by Engineer-in-Charge.
Supply and fix air termination single pointed aluminium rod of 12mm dia 1200mm long complete all as specified and directed by Engineer-in-Charge.
Supply and fix Test point terminal block made of gun metal or phosphorus bronze size 75mm x 75 mm x 7 mm, drilled and screwed including, 3 NOS, 8mm dia 25mm long hex, head screw with all neccesary fixing arrangements complete all as specified and directed by Engineer-in-Charge.
Supply and fix aluminium strip 25mm x 3mm with saddle and fixing screws etc for roof conductors and down conductors above ground level fixed on walls / roof with all neccesary fixing arrangements complete all as specified and directed by Engineer-in-Charge. Note : Epoxy base insulator only will be measured and paid seperately
Supply and fix galvanised iron strip of size 32mm x 6 mm burried in ground or "fixed on wall'' with all neccesary fixing arrangements complete all as specified and directed by Engineer-in-Charge. Note : 1. Epoxy base insulator only will be measured and paid separely. 2. All GI strip joints should be butt welded atleast 50 mm long.
Supply and fix epoxy base insulator of suitable size, 35mm height fixed on PCC blocks/ wall or MS angle/ Pipe or on traverse etc. complete all as specified and directed by Engineer-in-Charge.
Material and labour for PCC block of size 150mm x 150mm x 150mm in PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate including necessary form / mould for fair and even surfaces, complete all as specified and directed by Engineer-in-Charge.
Material and labour for GI tubing light grade of size 40 mm bore for connecting to air termination rod / protection to GI strip, bracket, road crossing/ on wall/ on pole for cable protecting complete all as specified and directed. Make : TATA, Jindal, Swastikl
Material and labour for Earthing complete with galvanised steel earth plate electrode 60cm × 60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron strip 32mm × 6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point complete all as specified and directed or indicated including testing on completion.
Supply and fix earth pit indicator made out of MS sheet of 16SWG of size 30cm x 20cm welded to " angle of size 25mm x 25mm x 3mm at a height 1 metre above ground complete all as specified and directed by Engineer-in-Charge.
Taking down existing unserviceable panel boad by disconnecting out going/incoming cable complete all as specified and directed.
Supply and fix street light bracket made out of 40mm dia medium grade GI pipe of 1.5 Metre long bend to shape including single coat of aluminium paint over and including a coat of red primer complete all as specified and directed. Note : Rate are including MS Clamp -02 Nos, nuts, bolts & Washers complete
Supply and fix energy saving and environmental friendly long life LED street light 40 watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and Impact resistance of IK07 with 10 kV Built-in Surge Protection Device including fittings & connection on existing street light pole bracket complete all as specified and as directed. Make:-ENDCITYLITEPLAT+SL40WLED757PASYBOPCWOSPD of Havells / Crompton Greaves / Wipro
Material and labour for power point wiring with 4.0 Sqmm single core PVC insulated unsheathed cable with stranded copper conductor for one switch socket outlet, 5 Amp/15 Amps multi purpose on independent board including suitable size of PVC conduit with conduit accessories ISI Marked and including PVC unsheathed copper conductor of 4.0 sqmm as earth wire complete all as specified and directed.
Supply and fix Switch socket combination 2 in 1, 3 pin, 6 Amps and 16 Amp flush type universal complete all as specified and directed.
Supply and fix in repairs suspended architectural LED luminaire 36 W including PVC three core flexible copper conductor cable from ceiling rose to connector of fittings complete all as specified and directed. Make:- Havells Cat No.DESTG250LP/S36WLED 857 SWH 1130/ Crompton/ Phillips.
Supply and fix SPN distribution board factory made double door flush type all as per IS 8623 made from sheet metal duly powder coated to be fixed flush with wall complete with all accessories complete all as specified and directed by Engineer-in-Charge for the following ways:- Make:- Havells / C&S / Legrand a) 8 way SPN
Supply and fix, connecting and testing MCB 10 kA C curve on existing distribution board out going/incoming any type and connecting to existing circuits complete all as specified and as directed for the following:- Make:- Havells / C&S / Legrand a) MCB SP 6 Amps to 32 Amps
b) MCB SPN 16 Amps to32 Amps
Supply and fix in repairs LED tube light 20W 4feet, long wall mounted anodized aluminum extruded head provided for efficient heat dissipation and intergrated and inter changeable integrated electronic driver lummeries LED as light sources housing complete with all assessories including suitable lamp, including pre wire and including up with tiwn core twisted flexible copper cable of suitable size complete all as specified and directed by Engr-in-charge. Make:- Havells / Crompton / Phillips
Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete all as specified and directed with one single pole MCB 240 volts 20 amps.
Material and labour for Sub main wiring with 2 runs of 4 sqmm single core, multistranded PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn in and including concealed rigid PVC conduit of 25mm dia, conduit fittings and accessories on wall/roof/floor with one run of 4 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.
Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables, pipes, foundation for poles etc., and getting out in soft/ loose soil complete all as specified and directed.
Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre depth and getting out in Hard / dense soil complete all as specified and directed.
Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre depth and getting out in soft disintegrated rocks complete all as specified and directed.
Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm in soils complete all as specified and directed.
Removing surplus excavated soil to a distance not exceeding 50 metre depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.
Material and labour for stone crushed sand filling in trenches to required width at bottom and top of cable cushioning including spreading leveling and consolidation complete all as specified and directed. Note : Punned thickness shall only be measured and paid.
Supply and lay in trenches un-reinforced precast concrete cable cover Class LV, Type I, flat, size 250 mm x 150mm x 40mm for cable protection all as specified and directed by the Engr-in-Charge.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core complete all as specified and directed. Make : Gloster/ Havells/ KEI
Supply and fix 4 pole MCCB 100 A ,50 HZ, 415 V with rupturing capacity 25 KA in existing LT panel including fabrication work for fixing arrangement and connecting the cable complete all as specified and directed. Make : Havells/ Legrand/ L&T
Supply and fix building security roadway light fittingEnergy saving and environmental friendly long life LED street light 35 watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 protection and Impact resistance of IK07 with 10 kV Built-in Surge Protection Device including PVC three core flexible copper conductor cable from ceiling rose to connector of fittings complete all as specified and as directed. Make:- Havells Cat No.ENDCITYLITPLAT+SL35WLED757PASBOPCWOSPD/ Crompton / Philips
Material and labour for point wiring complete with FR PVC insulated unsheathed cable 1100V grade conforming to IS-694, 1.5 sqmm (nominal area) multistranded with copper conductor drawn through and including PVC conduit of size 20 mm accessories on walls/ roof/ ceiling etc including provision of PVC insulated unsheathed 1.5 sqmm multistranded with copper conductor as earth dolly complete all as specified and directed for the followig :- a) one light point controlled by one; single pole switch.
Supply and fix Switch piano, flush type single pole, one way, 5 Amps, 240 volts complete all as specified and directed.
Supply and fix Ceiling rose surface Bakelite, 65mm x 50mm three terminals 230 Volts, AC Single phase complete all as specified and directed
Supply and fix SPN distribution board factory made double door flush type all as per IS 8623 made from sheet metal duly powder coated 6 way to be fixed flush with wall complete all as specified and directed
Material and labour for unarmoured copper cable 95 Sqmm 4 core including cable connecting lugs, glands, jointing materials etc complete all as specified and directed.
Supply and fix MCCB 250 Amps 3 pole 415 Volt with breaking capacity 36 KA Over load and short circuit thermal magnetic protection in enclosure complete all as specified and directed.
Supply and fix sheet metal enclouser suitable for 250 Amp MCCB 4 pole 36 KA on wall complete all as specified and directed.
Material and labour for Earthing complete with galvanised steel earth plate electrode 60cm × 60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on complete all as specified and directed . Note:- Strip/wire beyond 7.5 metre in length shall be measured & paid seperately.
Material and labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed.
Supply and fix copper busbar box 200 Amp rated capacity complete all as specified and directed.
Material and labour for GI tubing 80mm bore (light grade) with all fitting laid in wall/floor/ including providing fixing clamps, bolts and nuts of suitable size for cable protection complete all as specified and as directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4.0 core including saddling on wall / surface complete all as specified and directed. Make:-KEI/ Gloster/ Havells
Supply and fix pole junction box sheet moulded compound (SMC) type with hinged door and locking arrangement of size 300mm X 200mm X 105 mm (internal ) comprising water proof bus bars with aluminium patti having 63 A rating, 63 A power block connector 4 ways. one no SP MCB single pole of capacity 6 Amps 240 volts and one No terminal for loop in & loop out suitable for three phase street light system including nuts and bolts and connecting up complete, MS clamp fabricated from 25mm x 3mm MS flat iron complete mounted on wall complete all as specified and directed. Make : Sintex or Techno commercial equivalent make.
Supply and fix pole junction box sheet moulded compound (SMC) type with hinged door and locking arrangement of size 230mm X 170mm X 105 mm (internal ) comprising one , one No SP MCB single pole of capacity 6 Amps 240 volts and one No terminal for loop in & loop out suitable for three phase street light system including nuts and bolts and connecting up complete, MS clamp fabricated from 25mm x 3mm MS flat iron complete all as specified and directed. Make : Sintex or Techno commercial equivalent make
Supply and fix new generation energy saving and environmental friendly long life LED street light 90 watt made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP66 protection and impact resistance of IK08 including GI pole bracket 1.2metre length suitable angel with 02 nos lamp and die 54 metre suitable for light fittings and connection on complete all as specified and as directed. Make:- ENDURAPEARLPLUSSL90WLED757PASYTOPCASTCC of Havells / Crompton / Bajaj
Material and labour for 3 single core PVC insulated unsheathed copper conductor cable multistranded 2x 2.5 sq mm +1x2.5 sq mm passing through in steel pole DB to street light luminaires complete all as specified and directed. NOTE :- 3 run of wire shall be measured as one length
Supply, errecting in truly vertical position steel tubular swaged pole 9 metre long with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP 31, including painting with anti corrosive paint internally complete and externally up to planting depth, alternative white & black strips of 30 cm width upto 1.5 metre above ground level complete all as specified and directed all as required at site or directed by Engr-in-charge.
Material and labour for PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundations of stays and poles, copping of poles etc complete including necessary form work weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
All as per item No 51 but PCC 1:2:4 type B-1 with 20 mm graded crushed stone aggregate for coping of pole complete all as specified and directed.
Material and labour for GI pipe light grade, for road crossing / on wall / on pole for cable protection of following size of pipe of Make Jindal / TATA/ Swastik complete all as specified and directed. NOTE :-(Excavation and earth work where required shall be measured separately. MS Clamps for fixing on wall / pole , etc are included in the unit rate). (a) 100 mm dia bore
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 300 sq mm 3.5 core complete all as specified and directed. Make:- Gloster / KEI / Havells
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2.0 core complete all as specified and directed. Make:- Gloster / KEI / Havells
Supply and fix new generation energy saving and environmental friendly long life LED street light 60 watt made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 including fittings & connection on existing street light pole bracket complete all as specified and as directed. ( 05 years warranty from company to be taken.) Make:-ENDURAPEARLNEOSL60WLED757PASYTOPCAST of Havells / Crompton Greaves / Wipro
Material and labour for cutting of roads/ plinth for removal/ lalying of pipe and making good the disturbed surfaces as per existing adjoining surfaces complete all as specified and directed by Engr-in charge .
Supply and fix new generation, post top , energy saving environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source 35 W complete all as specified and as directed. Make: CORALPT35WLED830PSYMTOPC of Havells / Crompton Greaves / Wipro
Supply , laying, testing and commissioning cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty), LT 1100 Volts grade with stranded aluminium conductor of size 185 Sq mm 3.5 core laid in trenches/passing through pipe/duct/ road crossing or fixed on poles, walls with suitable size clamps made out of mild steel flat iron including jointing material such as crimping type lugs, brass cable glands, heavy duty double compression type etc., complete all as specified and directed. Note: Earthwork Excavation, sand cushioning and cable covers will be measured and paid separately. Make : KEI/ Gloster/ Havells
Material and labour for GI tubing 25 mm bore (light grade) with all fitting laid in trench for cable protection complete all as specified and as directed.
Supply and fix MCCB 250 Amps 4 pole 415 Volt with breaking capacity 25 KA adjustable thermal type release in existing LT panel / in sheet metal enclosure complete all as specified and directed. Make:- C&S Cat No:-CSE2M250ATM4P/ Havells/ Legrand/ L&T
Supply and fix change over switch of 250 Amps in sheet metal enclouser complete all as specified and directed. Make:- C&S Cat No:- E-CSCF250B4CO/ Havells/ Legrand/ L&T
Material and labour for Earth contunity conductor or main earthing lead fixed to wall on recessed or burried in ground or drawn in conduit/pipe fixed to poles or any other indicated situation for loop earthing as required 32mm x 6 mm size galvanised strip complete all as specified and directed.
Supply and fix iron cable root indicator for HT / LT cable on round plate of size 10 cm dia & 3mm thick with angle leg 35mm x 35mm x 5mm letter insrcibed on both side as "HT CABLE" / ''LT CABLE'' of specified font size not less 60mm as directed & mounted on PCC complete using PCC 1: 2:4 type B1 using 20mm graded crushed stone aggregate complete all as specified and directed. Note - Cable Root indicator can be fixed at the distance of 50 metre along with cable excavation.
metro electrical services
Rama Electricals
CHAITANYA WINDWELL
PAMS ENTERPRISES
MAYUR ELECTRIC SERVICES
tulsani associates
ASHA ASSOCIATES
shakti engineering and electrical works
SKS Electricals
Borole Electricals
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .