GE/C-39/2020-21

Amount

LOCKER BED SIDE STEEL(FD-222/257/1029)

Repair of unsv hasp and staple, denting and painting internally and externally including bottom with two coats of synthetic enamel paint including prepration of surfaces complete all as specified and directed .make Asian/Berger /nerolac ist quality

REPAIR TO CHARPOY GI PIPE (FD-220)

Removing of old existing unserviceable newar from charpoy,tightening of all loose components of charpoy and re-weaving of charpoy with new newar 50-55 mm wide 1st quality white/coloured newar (sample as approved by GE) weaved not less than 1.5 Kg per charpoy,closely inter-knitted from both sides and all joints must be stitched with nylon thread complete all as specified and directed.

M&L dismantling of existing unserviceable broken long rail and S&F new long rail of GI pipe medium grade 32mm size bore duly ISI marked including threading at both ends complete all as specified and directed. Make : Jindal/Tata/BST.

M&L dismantling of existing short rail and cutting of old long rail obtain from srl No 2.02 to be required size for short rail including re-threading at both end complete all as specified and directed.

M&L dismantling of existing unserviceable broken leg and cutting of old short rail obtain from srl No 2.03 to the required size of leg including re-threading at one end and fixing complete all as specified and directed.

M&L dismantling of existing unserviceable elbow GI three way and S&F new elbow GI three way suitable for GI pipe medium grade 32mm bore pipe complete all as specified and directed.

S&F in replacement check nut 6mm thick suitable for 32mm bore to GI pipe charpoy of approved make complete all as specified and directed.

M & L 12mm thick plywood commercial type BWR grade size 1980mmx900mmx12mm thick (in one piece only) as top of GI charpoy with mild steel screw bolt (machine made) of size 75mm long, 6mm thick with hexagonal or square head at one end and screw the other with washer and hexagonal square with two central stiffener of 30x5mm flat iron, including removal of old unserviceable nylon newar, complete all as per specified and directed by Engr-in-Charge. Make of plywood Duro/Archidply/Jayna(Deconply)/National confirming to IS 303:1989.

CHAIR VERANDAH (FD-259)

Removing of existing unserviceable old cane and recaning of chair Verandah with new plastic cane of 4 - 4.5 mm wide cane of Make: Aryan/Shah/BR Super including welding of broken/damaged chair Verandah including prepration of surfaces and applying two coats of white synthetic enamel paint complete all as per specified and directed by Engr-in-Charge.

Removing of old unserviceable existing shoes and S&F new approved appropriate hard rubber shoes at the bottom of legs complete all as shown on drawing and as directed.

CHAIR EASY(FD-229 & FD-17(M)

Removing of existing unserviceable old cane and recaning of chair easy with new plastic cane, white 2.00 mm wide ( for seat and back) half round of 0.4 mm thick and border caning 3.5mm wide plastic cane of brand SHAH/Aryan/BR Super including french polishing and Normal repair of existing Chair Dining like grinding of outer surface, hamering of nail, fill of micro crack with favicol and wooden putty etc. complete all as directed by the Engr-in-Charge.

M&L dismantling of existing unserviceable broken stiffener(side/central) and S&F new stiffenerl of 2nd class well seasoned hardwood to be fixed with fevicol and nails complete all as specified and directed.

CHAIR DINNING (FD-279)

All as per srl item No 4.01 here in before but to chair dining

All as per srl item No 4.02 here in before but to chair dining

CHAIR WRITING (FD-280/250)

All as per srl item No 4.01 here in before but to chair writing

All as per srl item No 4.02 here in before but to chair writing

TABLE SIZE 900X600X760 MM WITH/WITHOUT DRAWER

Removing of unserviceable top and S&F top 18mm thick int gde Prelaminated particle board with 4 mm thick teakwood beading allround the edges of top before fixing the top. shape and size all as specified on drg and as directed by Engineer-in-Charge.

Repair including welding of all joints of frame of table 900x600x760mm, denting including prepration of surfaces and applying two coats of white synthetic enamel paint complete all as per specified and directed by Engr-in-Charge. make Asian/Berger .

French polishing to be done including preparation of old surfaces all as specified and filling of cracks with putty. Wood based surface direct to vision with glossy shining when placed in position.Color of polish will be as per user requirement or as approved by Engr-in-Charge

TABLE SIZE 900x900x760MM /1200x900x760MM

All as per srl item No 7.01 here in before but to table 900x900x760mm/1200x900x760mm

All as per srl item No 7.02 here in before but to table 900x900x760mm

BED HARD WITH PLYWOOD TOP (FD-246/247)

S&F in replacement top of bed hard to byf 12mm thick commercial plywood BWR grade conforming to IS 303-1989 of ISI marked and to be fixed with 25mm long steel screw without having any joints, shape and size, all as specified on drg or as directed by Engineer-in-Charge. Make :- Duro/Archidply/Jayna Deco/National confirming to IS 303:1989

S&F in replacement long rail using 2nd class hardwood well seasoned “SAL” free from crack and dead knots, shape & size, all as per existing /specified in the drg or as directed by Engineer-in-Charge

S&F in replacement short rail shall be 2nd class hardwood well seasoned “SAL” free from crack and dead knots, shape & size, all as per existing /specified in the drg or as directed by Engineer-in-Charge

Head rest : outer ply to be replaced by 3mm thick plywood one side teak face and inner side commercial plywood BWR grade ISI marked IS 303-1989 including teak wood beading all round and ½ cut 12mm dia beading made to shape as shown on drg or directed by Engineer-in-Charge

Foot rest :- All as per srl item No 9.04 above

All as per srl item No 7.03 here in before but to Bed Hard

JCO'S BED HARD STEEL WITH PLYWOOD TOP (MAP Drg)

S&F in replacement top of bed hard to be made of 12mm thick commercial plywood BWR grade conforming to IS 303-1989 of ISI marked and to be fixed with as per existing drg without having any joints, shape and size, all as specified on drg or as directed by Engineer-in-Charge. Make :- Duro/National/Kitply/Archidply/Jayna(Deconply)

Repair, denting and repainting of frame of bed hard steel of conduit pipe with one coats of synthetic enamel paint with spray machine painting make Asian/Berger after cleaning surface for smooth painting.

Removing of old unserviceable existing shoes and S&F new approved appropriate hard rubber shoes at the bottom of legs complete all as shown on drawing and as directed.

TABLE DINING FOR 6/8 PERSONS(FD-273/MAP)

All as per srl item No 7.01 here in before but to Table dining

All as per srl item No 8.02 here in before but to Table dining

Short side rail : all as per Srl item No 8.02 above but shape and size as shown in drg.

All as per srl item No 7.03 here in before but to table dining for 6/8 persons

Table Bed Side(FD Series)

S&F,in repair, unserviceable complete set of Table Bed Side including sides,shelf and back of 18 mm thick int grade prelaminated particle board duly polished with 4 mm thick teakwood beading on edges exposed to view complete all as specified,shown on drg and as directed.

SOFA SET REMOVEABLE CUSHION COVER (Set of ten)

S&F of removable sofa cover easy to remove and wash of Tapestry cloth of best quality of range Rs 250-300/RM complete all as directed for cushion of size 21"x22"x4" of 32mm desnsity for Sofa set 03 pieces to seat five. Note : Colour and sample of Tapestry cloth will be approved by Engr-in-Charge.

CHAIR TUBULAR STEEL WITH ARM(FD-75M)

M & L for fixing of cushion 75mm 32 density with superior quality fabric/rexine ( not less than 200/mtr) on base of 12mm commercial BWR plywood with screw and high quality upholstery workmanship in replacement of existing u/s Seat of Chair Tubular Steel with Arms.

All as per serial No 12.01 above but back.

S&F of 2 Nos flat Iron stiffener of size 20 x 3mm to support seat of chair tubular steel with arm to be welded as per drawing and all as specified by the Engr-in-Charge.

Supply of Bath mat PVC as per Drg No.FD/E6/MAP/07

Supply of Chair easy as per Drg No.FD-229

Supply of Charpoy IP Hard Top as per Drg No.FD/MAP-II/01

Supply of Peg Table as per Drg No.FD-277

Supply of Receptacle PVC as per Drg No.FD/E6/MAP/13

Supply of Teapoy as per Drg No.FD-382

Note :- Total amount of Sch of credit is Rs. 21990.00 as per Sch of credit. Net contract sum shall be total quoted amount of bidder (-) amount of Sch of credit.

SMS Enterprises

Rana Construction Co

M/s Krishna Construction Co.

M/S Sunil Steel Works

M/S ANIL KUMAR

F.M. KHAN SONS

M/S NEHAL ENTERPRISES