GENERAL FUND 2026-27

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections.

Supplying and fixing in position of Alu. Anodised Partition with 62x38x2mm extruded box section at bottom vertical and horizontal members. The vertical member are spaced at 90 cm c/c and to horizontal members are spaced at 1.2M, 2.1M and 2.4M height the bottom panels should be covered with 12 mm thick PLB exterior grade and the top and middle panels should be fixed at 4mm thick glass thick glass with necessary glassing clips.rubber beading, etc., including necessary dismantling holes in RCC columns, beams masonry wherever necessary with power power drill ti the extent required and made good to the original conditions after fixing as directed by the departmental officers. All the Aluminium sections should be anodised to 1.5microns as per ISI specification 1868/1962.

Supply and delivery of Metal Mild Steel Office Tables, With Storage, table size 3.5 ft width x 2 ft depth x 2.5 ft height (perfect for workspaces of all sizes), Materials - Top: Particle board with a natural wood finish (offers durability and affordability), Frame: Sturdy metal for lasting stability and industrial style, Rubber for floor protection and added stability, No. of Drawers 3 Drawers All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer.

Manufacturing, Supply and delivery of Wooden table size 1200mm X 525mm X 750mm, using 18mm thick Antitermite water proof ply and top of table should be covered with laminated partice board. The keyboard tray shall be of size 710mm (front width) X 300mm (depth) approximately is to be provided with end fittings made from minimum 2mm thick MS steel mounted on either side and the keyboard tray shall be easily slideable, provided with two telescopic channels with balls. The size of the open area for CPU should be 200 mm (W) x 400 mm (D) x 500 mm (H).The Cost shall incluidng drawers and cabinets with necessary accessories and two coats best varnish on the inside of the table and the sides of plywood should be lipping with teak wood beading and with two coats of varnish etc., complete. All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer.

Manufacture and supply of Rolling Nylon Wire Chair Adjustable Hydralic stainless steel base with Rotating wheel. All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer.

Manufacture and supply of plastic chairs with using PP (Polypropylene) Dimensions Width 57cm, Height 90cm depth 60.7m All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer.

Manufacture, supply and delivery of 3 Mild Steel Three Seater Metal Chair, For Office, metal : mild steel, seating capacity three All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer.