Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.0 LAccepted-AOC WARD NO 4 NEAR MASZID BHATTAGAON DISTT JHANSI 284001 UTTAR PRADESH | JHANSI | UTTAR PRADESH | 284001 | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹33.9 L+₹3.2 L (10.4%)Rejected-Finance 0 SALEHPUR KOTLA BSR ROAD PO DAHANA HAPUR HAPUR UTTAR PRADESH 245101 | HAPUR | UTTAR PRADESH | 245101 | L2 | Rejected-Finance NOT BEING LOWEST BIDDER |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
22 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BKT
GE (AF) BKT LUCKNOW
REPAIR TO UPVC SIGN BOARDS, PCC PAVING HARDSTANDING, JOINT FILLING, CRACK AND SMART PERIODICALS TO HANGER SUN SHELTER FOR OPERATIONAL REQUIREMENT AT TECH AREA AND ESSENTIAL/ MAINT REPAIR RISING MAIN, DISTRIBUTION LINE AT AF STN BKT
2024_MES_647468_1
8751/BKT/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) BKT
7 documents required · 7 mandatory
₹500
GE (AF) BKT
₹70,000
14 Sept 2024
22 Mar 2024
24 Apr 2024
22 Mar 2024
22 Apr 2024
4 Apr 2024
Amount
Supply & fixing in repair visible UPVC sign board of area/size exceeding 1.80 sqm and not exc 3.15sqm each made from 4.00 mm thick engineering grade plastic (acralic Sheet) having monolithic structure to with stand,temperature variations from cold environment to sweltering hot condition sand to with stand high velocity winds,framed and braced with 40mm dia PVC pipe best quality to with standhigh velocity wind pressure,with height of bottom of board should be 45-60 cm above the ground level with best quaility structure including excavating in post holes of size30cmX30cmX45cm and embedded in PCC (1:2:4) type B1using 20mm graded stone aggregate and making plinth around frame of width 600mm and length as required,including providing and applying weather resistance coating,providing and painting of new numerals/alphabets with retro reflective tape cutting as computer plotter etc complete all as specified and directed
Ditto all as per item No 01 above but area not exc 0.80 sqm each complete all as specified and directed .
M & L for cutting the edges of existing joints with suitable machine by racking out old sealing compound from existing joints of tarmac of size 8mm wide and 25mm deep and as directed by special tools like cutting blades / grinder machines (use of hammers is prohibited as it damages the edges) and removing old filled sealing compound from the joints by means of compressed air using hand blower including disposal of the same to a distance of 500m from the edge of runway as directed and repair of joints by epoxy wherever required and fill up the joints by mechanical means as per following process: - (i) Provision of Backup rod of 10mm dia suitable to be inserted in the joint tightly as specified. (ii) Provision of adequate masking tape on either sides of joint to avoid spillage on concrete surface before applying joint sealant and removing the same after sealing of joints. (iii) Supplying and filling of sealing compound properly for a depth of 15mm as specified after application of suitable primer as directed by Engineer-in-Charge. (The finished level of sealed joints shall be on an average 3 mm below the top surface of slabs.) NOTE: - Sealing compound shall be Bostik "Seal N Flex -2K', 02 component (Base and Hardner) Bostik Polyurethane sealent of grey colour conforming to BS-5212 with minimum movement accommodation factor of + 30% when tested as per ASTM C-719 or equivalent product of M/S Choksey Chemicals Pvt. Ltd. or M/S STP Ltd. or as listed in the Particular Specifications and as approved by the GE in writing. The sealent shall have shore A @ 25 degree centigrade =15 + 5 and as per manufacturer's instructions.
Ditto all as per item No 03 here-in-before but joints having width 10mm and 28 mm deep (alongwith 12 mm dia backup polyethylne rod)
Ditto all as per item No 03 here-in-before but joints having width 25mm and 45 mm deep (alongwith 30 mm dia backup polyethylne rod)
Ditto all as per item No 03 here-in-before but joints having width 08mm and 25 mm deep (alongwith 10 mm dia backup polyethylne rod) NOTE: - Sealing compound shall be Bostik "Seal N Flex -1', single component Class 'A' Bostik Polyurethane sealent conforming to BS-5212 with minimum movement accommodation factor of +(-) 50% when tested as per ASTM C-920-87 & 98 or equivalent product of M/S Choksey Chemicals Pvt. Ltd. or M/S STP Ltd. or as listed in the Particular Specifications and as approved by the GE in writing. The sealent shall have shore A hardness >/= 50 and as per manufacturer's instructions.
Ditto all as per item No 06 here-in-before but joints having width 10mm and 28 mm deep (alongwith 12 mm dia backup polyethylne rod)
Ditto all as per item No 06 here-in-before but joints having width 25mm and 45 mm deep (alongwith 30 mm dia backup polyethylne rod)
M & L for filling of pot holes of size 20mm dia and 20mm deep in concrete surface and filling as per following process:- (i) Cleaning of surface by means of wire brush and removing the dust by means of compressed air. (ii) (Bostik ERM or equivalent product of M/S Choksey Chemicals Pvt. Ltd. or M/S STP Ltd as approved epoxy resin mortar as per manufacturer's instructions) after application of epoxy resin primer with and including necessary form work complete all as specified and directed
M & L for repair to concrete slab or pavement of existing damaged edges / spoiled edges to triangular / rectangular cross section,of width 15mm to 20mm and depth 30mm to 40mm , by machine cutting and removing all broken and loose material to a distance exc. 50 metres but not exc. 100 metres and cleaning the surface with compressed air to remove dust, dirt, loose sand / foreign material, washing the surface with acid solution and repairing surface / edge (with Bostik ERM or equivalent product of M/S Choksey Chemicals Pvt. Ltd. or M/S STP Ltd as approved epoxy resin mortar as per manufacturer's instructions) after application of epoxy resin primer with and including necessary form work complete all as specified and directed.
M & L for cutting the edges of any type of joints having width 8mm to 10mm and 30 mm deep by racking out old sealing compound from existing joints by means of compressed air and filled the joints with sealing compound grade 'B' after application of primer for the following size joints complete all as specified and directed.
M&L for preparation of old painted surface of any description over 10cm width or girth of concrete/plastered surface and applying one coat of synthetic enamel paint on signal square, wind sock at any height etc complete all as specified and directed.
Demolition of cement Concrete surfaces of any description and in any position not other wise specifically provided for pavement of taxi track / runway / Disperasl area complete all as specified and directed.
M&L for 100mm thick PCC (1:2:4) type B-2 using 40mm graded stone aggregatea as in foundation filling or mass concrete with spike rolling to surfaces or making impressions of expanded metal, while the concrete is green complete all as specified and directed.
Taking down cement plaster from brick walls/stone walls etc of any description including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed
M&L for rendering 10mm thick in CM (1:4) on concrete surfaces,/brick of drain channel finished even and smooth without using extra cement on concrete/brick surface , complete all as specified and directed
Demolition of brick work/stone boulder masonry,built in cement mortor including all quions,arches, pillars etc complete all as specfied and directed .
Removing demolited concrete/brick work material exc 250 m but not exceeding 500m and depositing where directed complete all as specfied and directed .
M&L for brick work with sub class`B'bricks straight or curved on plan exc 6mm eanradius built in CM (1:4) etc complete all as specfied and directed.
Ditto all as per item No 19 here-in-before but Except Brick complete all as specfied and directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished fair and even without using extra cement etc complete all as specified and directed.
M & L for single component 'Aspha Flo' coal tar free signature grade Gilsonite modified Asphalt emulsion, special polymers and Adhesive streaming crack, joint stuffer to prevent cracks from forming into pot holes and filling of cracks and joints on asphaltic surface of the runway, shall be @ complete to be applied directly on damp pavement also and coverage shall be 24.20 mtr/Ltr for 6mm (width) x 6mm (depth) crack manufactures instructions complete all as specified and directed.
Ditto all as per item No 22 above but size of crack 13mm x 13mm and coverage @ 6.05m/Ltr complete all as specified and directed. (Make: M/S Srijan Systems Pvt Ltd or equavalent as approved by GE).
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for sand filling in floor,50mm thick,spread levelled and rammed including watering and consolidating complete all as specified and directed.
M&L for 80mm thick, M-40 grade machine pressed precast concrete interlocking paver block coloured relective type rubber moulded fixed with grey cement and no pigment of any shape and size confirming to IS15658-2006 over and including 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate complete all as specified and directed.
M&L for preparation of old painted surface of steel and applying two coat of synthetic enamel paint and including priming coat (camouflage pattern) combination of three coloure over 10cm in width or girth complete all as specified and directed.
M&L for preparing new plastered surfaces of wall by affixing wall care putty rubbing to smooth finishing and and applying two coat of 100% premium acrylic emulsion Comouflaging pettern having VOC less than 50gm/Ltr and UV resitance as per IS 15489-2004 alkali and fungal resistance, dirt resitance exterior paint of required shade (company depot tinted) with silicon additives @1.43 ltr/10 sqm over and including priming coat of exterior primer applied @09.ltr /10sqm over new prepare surface and height upto 9 meter complete all as specified and directed. Note : Primer and emulsion to be carried out through airless sprey machine (Mechanical means). Make Asian paint apex ultima/Berger weather coat long life 10/Nerolac excel everlast 12.
M&L for two coats of cement base paint over a coat of alkali resistance priming paint including preparation of surfaces complete all as specified and directed.
Providing and laying at or near ground level factory made pre cast kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified.
M&L for 15mm thick rendering in patches on fair faces of brick work in cement mortar (1:4) and finished even and fair without using extra cement area exceeding 1.00 Sqm but not exceeding 2.00 Sqm each complete all as specified and directed.
M&L for uprooting of wild tress such as grasses/ bushes etc. from the roof/wall surfaces/AC sheet/soil pipes surroundings including its penetrated roots with suitable cleaning chemical and making good to the damaged plaster by providing cement mortar (1:3) and finished the surfaces to match with existing surfaces complete all as specified & directed. (Cost of materials is deemed to be included within the quoted rate).
M& L for servicing including repair/ maintenance of split and window air conditioning of 1.5 to 3 ton capacity at site by skilled mechanic with process cleaning evaporator / cooling coil ,condensor coil by using pressure pump ,clear water with copper friendly chemical solution for removing complete dust, checking function of all components, rectifying defect with replacement of defective parts (if found),charging of gas ,welding brazing etc except compressor all as specified and directed NOTE;- (i) Defective parts shall be measured and paid seperately as 'Supply Only' under respective item of Sch "A" given here-in-after. (ii) Payment for each job shall be made once only during currency of contract irrespective of attending / replacing defective parts at any time that will be paid supply only under respective item if not paid earlier. (iii) If required and repair is beyond at site taking out & refixing of AC / any repair shall be deemed to include in quoted rate.
Supply only Starting capacitor 80-100 mfd for window/Split type room air conditioner complete all as specified and directed.
Ditto all as per Item No 35 here-in-before but for 4 mfd
Ditto all as per Item No 35 here-in-before but for 6 mfd
Supply only Running capacitor 45+5/6 mfd complete all as specified and directed.
Ditto all as per Item No 38 here-in-before but for 50/55+5/6 mfd
Supply only Refrigerant gas R-22
Supply only Refrigerant gas R-132a/ R-32
Supply only Indoor blower motor for Split type AC 1.5 Ton capacity as existing make & model at site
Ditto all as per Item No 42 here-in-before but for split AC 2.0 Ton Capacity
Supply only blower motor out door unit split type AC capacity 1.5 TR as existing make & model at site
Ditto all as per Item No 44 here-in-before but for split type AC capacity 2.0 TR
Supply only insulation for cooper tube of size 1/4" or 1/2" or 3/8" or 5/8" dia
Supply only condenser Fan Suitable for Split Type AC any capacity
Supply only blower suitable for split AC 1.5 /2 Ton capacity for indoor unit
Supply & fix kit fan motor single phase 230 V AC ,Copper wound ,900 rpm for Desert cooler
Supply & fix exhaust motor single phase 230 V AC ,Copper wound ,18 inch,1400 rpm for Desert cooler
Ditto all as per Item No 50 above here-in-before but suitable for plastic body Desert cooler of Make- symphany/ Bajaj or as existing at site of superior quality 3 speed motor
S & F in repair Circuit board PCB of Split Type AC complete for 1.5/2.0 TR Split type A/C complete all as specified and directed
S & F in repair Circuit board PCB complete set for indoor & outdoor of inverter type Split AC as existing at site of capacity 1.5/2.0 TR Split type A/C complete all as specified and directedd
S&F Wood wool pad set suitable for desert cooler heavyy duty including dismantling the old unserviceable wood wool pad set complete all as specified and directed
Supply & fix Submersible pump for desert cooler (in replacement) for lifting water upto 1.2 meter head.
Disconnecting, cutting and taking out unserviceable sealed unit compressor of split type Air conditioner 1.5 Ton capacity any make & model and supply and fixing company new compressor of same make as existing at site for split type air condition 1.5 Ton capacity soldering, welding, brazing as required including charging of refrigerant gas in the exchanged compressor, making electric & mechanical connections of air conditioner at site and testing on load complete all as specified and directed.
Ditto all as per Item No 56 here in before but for split AC 2.0 Ton Capacity
S&F Indoor unit of split type AC capacity 2.0 TR including copper evaporator coil ,blower ,blower motor,controling circuit of AC complete all as specified and directed
Cutting, disconnecting & taking out the condensing unit of split type room air conditioner 1.5/2 Ton capacity and providing the new copper condensing unit of exsting size model in place including welding, brazing etc and tdesting on load complete all as specified and directed
Ditto all as per item No 59 here-in-before but evaporator coil
Dismentelling of old broken plaster insulation and M &L for External thermal insulation to supply and return airduct laid outside the conditioned space/ room with Closed Cell Class O Nitrile Rubber Elastomeric Insulation of 19 mm thick Density 40 - 55 Kg/m3, Thermal Conductivity of 0.037 W/mk at 200 Celcius Mean Temp. and μ≥7000 (without any additional vapour barrier) and with Factory Laminated aluminium foil of minimum 60 microns thickness to be applied on Ducts using manufacturer's recommended Rubber based Adhesive in a blend of solvents and finally finished with 26 gauge almunium sheet complete to make it wheather proof complete all as specified and directed
Excavation in trenches not exceeding 1.5mtr wide & not exceeding 1.5 mtr deep for laying pipe lines etc & getting out in soft /loose soil including forming bottom surface to required level or slope complete all as specified and directed
Returning , filling in trenches (Soft/Loose soil) in layers not exceeding 25 cm thick after laying of pipe including spreading, levelling & well ramming and watering as required complete all as specified and directed
Removing surplus excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above from the starting point complete all as specified and directed
S&F in repair GI tubing 15 mm bore medium grade complete with all fitting laid in trench or fix on wall/floor including complete all as specified and directed.
Ditto all as per item No 65 but for 20 mm bore
Ditto all as per item No 65 but for 25 mm bore
Ditto all as per item No 65 but for 40 mm bore
Ditto all as per item No 65 but for but 50 mm bore
Ditto all as per item No 65 but with 80 mm dia bore
S&F (in repair) pressure booster pump set Electric driven of capacity 1 HP single phase 230Volts,50Hz AC complete with pressure tank, pressure gauge, pressure switch, NRV and other connecting accessories etc complete all as specified & directed.
Supply, installation, fixing, jointing and testing, ISI Marked, cast iron sluice valve of class PN-1.6 conforming to IS-14846 of 2000 both ends flanged with iron wheel head and stainless steel spindle, long body type, jointed on both ends with and including rubber gasket joints, nut, bolts & washers and taking down old us and tested of size of 150 mm bore.
Ditto all as per item No 72 but size for 100 mm bore
Ditto all as per item No 72 but size for 80 mm bore
M & L for painting of valve pit / chamber cover made of MS sheet cover complete all as specified & directed
Supply & Fixing &testing DI/CI Fittings any size, such as bends(any type, radius & angle) tappers any type (Straight, bend, increasing, decreasing or double socket or both end flanged etc) Tee pieces, single branch 'Y' junction double branch, cross (all socket or spigot & socket or both end flanged), collars, caps, connecting piece and plugs complete all as specified & directed.
M&L for lead wool joint in 100/150 mm dia CI pipe including excavation ,returning filling etc with tool and plant complete all as specified & directed.
Taking up or down existing GI steel water tubing of size 80mm bore of any grade including all fittings and accessories from trenches/open surfaces, including cleaning ,re-threading the old threads, cutting, welding work, etc as required and re-fixing the same after necessary repair works, etc as required , including new GI fittings and accessories as required in new or old position complete all as specified and directed. Note: Necessary earth work shall be measured and paid seperately under relevant item of Sch 'A' given here-in-before.
Ditto all as per item No 78 but for 50/40mm bore (Nominal bore)
Ditto all as per item No 78 but for 25mm bore (Nominal bore)
Ditto all as per item No 78 but for 20mm bore (Nominal bore)
S&F in repair supply and fixing gun metal globe or gate valve with iron wheel head screwed both end for GI pipe and fixed in size of 15 mm dia bore.
Ditto all as per item No 82 but for 20 mm dia bore
Ditto all as per item No 82 but for 25 mm dia bore
Ditto all as per item No 82 but for 50 mm dia bore
Taking down GI/CI/DI mains from treanches/ fixed to wall/floor/ any type including cleaning , cutting, welding work, jointing with new material (if required) etc as required and re-fixing the same after necessary repair works, etc as required in new or old position including necessary earth work for the size of 100mm bore complete all as specified & directed.
Ditto all as per item No 86 but for size of 150mm bore
Cutting in position cast iron/DI pipe for replacement for insuction of new fitting etc for the size 100/80mm bore.
Ditto all as per item No 88 but for size of 150mm bore
Supply & Laying 100mm bore ductile iron pipes single socket including special class "K-7 with spigot and socket ends centrifugally in any length laid in trenches for 100 mm dia bore sizes including taking down old us CI/DI pipe complete all as specified and directed.
Ditto all as per item No 90 but for 150mm
M&L for rubber glasket for100mm bore.
M&L for rubber glasket for150mm bore.
M&L for flange joints with rubber or fibre board gasket with ms nuts & bolts & washar etc for 100mm bore pipe complete all as specified & directed.
Ditoo all as per item No 94 but for 150mm bore
M&L for new lead joint with for 100mm bore
M&L for new lead joint with for 150mm bore
M&L for fixing / lowering in replacement of submersible pumping set, having discharge capacity 460 LPM at 65mtr head driven with 3 phase,440 volt elelctric motor of suitable capacity but not less then 15HP, complete all as specified & directed.
Supplying & fixing MS pipe class 'C' of 100mm dia threaded on both ends including nuts, bolts, washers and rubber glasket complete all as specified and directed.
M&L for brick work with sub class`B'bricks straight or curved on plan exc 6mm eanradius built in CM (1:6) etc complete all as specfied and directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished fair and even without using extra cement etc complete all as specified and directed.
M&L for writing letter any size on wall/iron sheet with paint with two coats of painting on base including preparing surface and making good etc all as specified and directed.
M&L for digital letter writing on acrylic sheet 6mm thick in any size and font including frame all around and laid for fixing on wall complete all as specified and directed.
M/s A S Associates
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .