Regarding Conversion of 01 Nos office in Suite room at UT Bhawan, Chanakyapuri, New Delhi. (E-30449)

Items

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : (12.5 mm thick tapered edge gypsum moisture resistant board)

FALSE CEILING, PAINT WORK AND POLISHING WORK : Providing and applying plaster of paris punning of 12 mm thickness over plastered surface to prepare he surface even and smooth complete.

brick wall and 9 inch thik with plaster

tiles work with meterial 2x2 tiles

water profing

plumbing work piper room

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 sqm

ELECTRICAL WORKS providing and supplying and commissioning of electrical point with 10 ft lenth wire with switch board with plug light fiting extra.

Conversion of Office to Bedroom Works Double Bed with fabric finish: Providing and fixing size - 2020mm L x 1780mm W x 200mm H of bed base as per below mention sizes constructed using 20mm thick BWR ply using required hardwood batons / aluminium / wooden framework. Front & sides of the bed base to be finished with app veneer with polishing work as per approved sample. Cost to including making cutouts for ventilation, necessary support system, polishing on wooden sections, all consumables, nails, adhesive, making provision for fixing of ledge, wooden beadings, lipping, margin, wooden battens, making provision for fixing of ledge/shelf, wastage and all necessary arrangements etc. all complete as per the design, detail drawing, specifications and instruction of Engineer In Charge.

Head Board panneling with wallpaper: Providing and fixing head Board back panelling made out with 12mm thk BWP plywood and to include installation and cut out for Electrical switches if any as per detailed drawing and of all kinds of profiles and cut outs required for light fixtures. L- 2800 X 2100mm H

Bed Side Table: Providing & fixing 450mm W x 450mm D x 350mm H side table made with 19mm thk BWP plywood and finished with App shade veneer compitable adheshive.

Providing & fixing Wardrobe size-1800mm W x 600mm D x 2400mm H Carcess shall be made with using 19mm thik BWP plywood for shutter, sides, top & nottom, 12 mm thick BWP Plywood for Back. All the External surface shall be finished in 04 mm thick app veneer with polishing work & internal with white laminate nails, adhesive, making provision for fixing of ledge, wooden beading, lipping, margin, wooden battens, making provision for fixing of ledge/shelf, wastage and all necessary arrangements etc. all complete as per the design, detailed drawing, Specification or as instruction of Engineer In Charge.

Tv Unit: Providing and supplying Tv unit made with 19mm BWP plywood finish with approved shade 04mm thick veneer with all surafce finish in polishing work as per details DWG instruction of Engineer In Charge. Size: L- 1220 X H- 2450mm

Vanity Counter: Providing and fixing vanity counter size 1050 L x 600 D x 850 mm high top finished in stone , Facia finish in app Veneer(match to room furniture) pasted over base frame made of 19mm thick BWP ply and Alumnium /wooden frame.Cost to including necessary support system, necessary aluminium framework to achieve required design, hardwares, making of cutouts, edge molding / chamfering, finishing of edges & making provision for MEP fixtures, cutting, wastage, metal sections, making & finishing of light cove underside of shelf unit, cleaning etc. complete as per detail drawing, specification and instruction of Engineer In Charge.

Luggage rack: Providing and fixing Luaggage rack made out of 19mm thick plywood with 04 thick veneer installed Cost to include the profile of the running resk as shown in detailed drawing with all edges to be smooth finish. size of luaggage rack-size: 900mm W x 450mm D x 500mm H

Study Table: Providing and fixing study table with 2 nos drawer & top Bavlleding Glass finish made out of 19mm thick plywood with 04 thick veneer installed Cost to include the Glass polishing all as per details DWG or site engineer instruction. size of luaggage rack-size: 1070mm W x 600mm D x 770mm H

Study Chair: Providing and Supplying study Chair with wooden Base and Fabric as per details DWG.

Vanity Mirror: Providing and fixing in position of removable 6mm thick mirror for vanity counter, fixed on 12mm thich BWP ply fixed on aluminium framework of required section and thickness. Mirror to have frosted slit at vertical light coves. Vinity mirror to have Cost to include necessary frame work to achieve required profile including protective coating to mirror back, anti mist defogger, edge polishing, fixing mirror with clip system, silicon sealant, making provision for light fixtures, all consumables, necessary fixing arrangement etc. complete as per detail drawing, specification and instruction of Engineer In Charge..

Dressing Mirror: Providing and fixing Dressing mirror with back side Plywood 12mm base Cost to include necessary frame work to achieve required profile including protective coating to mirror back, anti mist defogger, edge polishing, fixing mirror with clip system, silicon sealant, making provision for light fixtures, all consumables, necessary fixing arrangement etc. complete as per detail drawing, specification and as directed by Engineer In Charge. size: 500mm X 1050mm

CURTAINSWITH Cier: Providing & fixing French/3-pleated/pinch curtains of pleat depth 4 cm, @ 200 c/c, from ceiling to floor level, with PVC/ aluminium track, with PVC curtain hooks at the line of each pleat, as per design and/or instruction of Engineer In Charge.

Shawer Cubical Partition With Door: Providing and fixing of Glass partition partition made of 10 mm thick clear Tempered glass finish of approved sample fixed with "U" channel on wall at one side, floor & Ceiling of approved size: 2250mm X 2400mm sample. All complete in line, level and plumb, including support system,"U" channel, , silicone sealants, anchoring system etc. all complete as per design, drawing & instruction of Engineer In Charge.

Providing and fixing Lamp on Bed side Table as per details dwg or instruction of Engineer In Charge.

Providing and installing SMART LED TV size: 50" as per instruction of Engineer In Charge.

Providing and Fixing Teliphone as per details dwg or instruction of Engineer In Charge.

Providing and fixing Veneer Finish Jamb made with 19mm BWP plywood finish with 04mm thick approved shade veneer & melamine polish finish as per details DWG or instruction of Engineer In Charge.

Providing and Fixing Plywood Pelmet finish with 06mm thick MDF finish with paint as per details DWG or instruction of Engineer In Charge.

BEDROOM AREA ACCESORY Providing and supplying of fixing acrylic kettle tray set: 3 pc set white/black, big tray with sachet holder +service tray as per instruction of Engineer In Charge.

Providing and supplying and fixing of iron board: hotel standerd fr silver color fabric, foldable and adjustable height, industrial grade ms powder coated frame,powder coated black color as per instruction of Engineer In Charge.1200mmx 375mm x 750mm

Providing,supplying and fixing of iron: with steam or with steam and water spray or dry iron, as per instruction of Engineer In Charge.

Providing, supplying and fixing of weighting scale:transparent and black base 150 kgs max, digital icd display instruction of Engineer In Charge.

Providing, supplying and fixing of wooden reguler hanger, as per instruction of Engineer In Charge. (As per Standard size available in market) *

Providing, supplying and fixing of shaving mirror : wall mounted 200mm X75mmx 25mmx aa brass except ss base , instruction of Engineer In Charge.

Providing, supplying and fixing of classic model double container 350ml SOAP DISPANSER capacity , as per instruction of Engineer In Charge.

Providing, supplying and fixing of hair dryer foldable stand alone on call , as per instruction of Engineer In Charge. (As per Standard size available in market) *

Providing, supplying and fixing of toilet tissue roll holder Make ss304 grade non rustable as per instruction of Engineer In Charge.

Providing, supplying and fixing of towel rack Make ss304 grade , non rustable available 24", as per instruction of Engineer In Charge.

Providing, supplying and fixing of clothes hook Make ss304 grade , non rustable , as per instruction of Engineer In Charge.

Providing, supplying and fixing of pillow protector -17" x27" quited with zip , as per instruction of Engineer In Charge.

Providing, supplying and fixing of Mattress protector 71" x 79" L terry with tpu 100% watewr proof , as per instruction of Engineer In Charge.

Providing, supplying and fixing of Napkin 18" x 21" white stin band , as per instruction of Engineer In Charge.

Providing, supplying and fixing of floor matt 20" x 30" 300gms box border 100% cotton , as per instruction of Engineer In Charge.

Providing, supplying and fixing of Cushion 30" x 18" Hsd , as per instruction of Engineer In Charge.

Providing, supplying and fixing of bed runner 17" x 95" color jacquard , as per instruction of Engineer In Charge.

Providing, supplying and fixing of bath robe xl waffle or as per instruction of Engineer In Charge.

Providing, supplying and fixing of Napkin rod of 15 inch on vanity black finish or as per instruction of Engineer In Charge.

Provide, supply & Fixing of safe locker ( Godrej) -12" x12" x 12" or as per instruction of Engineer In Charge.

Providing and supplying of 304 Stainless Steel Kettle Black 1.2 Ltr

New ABS Soap Dispenser 800ml

New Paper Dispenser White (As per Standard size available in market) *

Room Round Waste Bin Black (220*255*0.4)

Providing and supplying of bed Rajayi as per instruction of Engineer In Charge. (For Rooms bed)

Providing and supplying of 10" thick Metteres king size as per instruction of Engineer In Charge.

Loose Furniture In G.F bedroom Area 3 seater Sofa : Providing and fixing 2 seater sofa made with wooden stucture with High density foam and approved shade fabric/leather all wooden surface finish with polish work as per instruction of Engineer In Charge.

Center Table: Providing and supplying Center Table/Cofee Table as per Details DWG.

Puffy: Providing and supplying Puffy as per desgin.

Providing and supplying fixing Data Switch point.

Proviidng and supllying installing Data Wire.

Providing and fixing Teliphone switch point.

Providing and supplying fixing Teliphone wire installing.

Providing and supplying installing KEY TAG switch point.

Providing and supplying installing Channel Black Wire.

DOOR BEEL PROVIDING AND SUPLLY.

WALL MOUNTED AC INDOOR UNIT 1.5 TR (DAIKIN/BLUESTAR/MITSUBISHI/etc.)

WALL MOUNTED AC Remote Controller

PLUMBING WORK WORK Providing and fixing WC as per details. (Jaquar/Kohler/Hindware/etc.)

Providing and fiing ciston plate. (Jaquar/Kohler/Hindware/etc.)

Providing and fixing HALTH FOSHITE. (Jaquar/Kohler/Hindware/etc.)

Providing and HED SHAWER as per details DWG. (Jaquar/Kohler/Hindware/etc.)

Providing and fixing BOTTEL TRAP. (Jaquar/Kohler/Hindware/etc.)

Providing and fixing alluminium skirting as per details dwg.

Providing and fixing photo frame as per approved by Engineer-in-charge