Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | H7₹39.6 L−₹14.0 L (26.0%)Accepted-AOC ANURAGPUR PO PANAGARH BAZAR DIST BURDWAN WEST BENGAL 713 148 | PANAGARH BAZAR | BURDWAN | WEST BENGAL | 713148 | ₹39.6 L−₹14.0 L (26.0%) Quoted ₹39.8 L | H7 | Accepted-AOC Contract awarded to M/s Unique Enterprises |
| 2 | H1₹53.8 LRejected-Finance | ₹53.8 L | H1 | Rejected-Finance Higher rate quoted than H7 |
| 3 | H2₹50.3 L−₹3.6 L (6.63%)Rejected-Finance VILL PO KOTA VIA PANAGARH BAZAR DIST BURDWAN WB PIN 713148 | BURDWAN | BURDWAN | WEST BENGAL | 713148 | ₹50.3 L−₹3.6 L (6.63%) | H2 | Rejected-Finance Higher rate quoted than H7 |
| 4 | H3₹47.6 L−₹6.2 L (11.6%)Rejected-Finance | ₹47.6 L−₹6.2 L (11.6%) | H3 | Rejected-Finance Higher rate quoted than H7 |
| 5 | H4₹47.6 L−₹6.3 L (11.6%)Rejected-Finance | ₹47.6 L−₹6.3 L (11.6%) | H4 | Rejected-Finance Higher rate quoted than H7 |
| Sl No | Description | Qty | Unit | M/s Baba kshatrapal Labour Contract And Construction Co-Operative Society Ltd H6 | BISWAS ENTERPRISE H4 | Jaibalaji Enterprise H3 | S S ENTERPRISE H5 | NATIONAL CONSTRUCTION CO H2 | INDIAN CONSTRUCTION H1 | UNIQUE ENTERPRISE H7 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00WOODEN/STEEL/TP FURNITURE Removing/taking out carefully old unserviceable worn out/components/ parts as mentioned here-in-after of the following wooden/steel/TP furniture without disturbing the other parts and supply and fixing new parts with material and labour as specified and as appended below, made to shape & size all as per drawing and as directed and made to finishing to receive paint /polish and necessary welding if required, to bringout the new serviceable condition all as specified, directed and shown on drawing:- | ||||||||||
| 1.10FD/E6/MAP/08(R) Bed Hard MAP | ||||||||||
| 1.11 | Pre laminated particle board from the head board frame (Size of Board : 610mm x 330mm) | 100 | Each | 80 ₹8,000 | 88 ₹8,800 | 100 ₹10,000 | 75 ₹7,500 | 125 ₹12,500 | 150 ₹15,000 | 50 ₹5,000 Lowest |
| 1.12 | Pre laminated particle board from the foot board frame (Size of Board : 610mm x 220mm ) | 100 | Each | 80 ₹8,000 | 88 ₹8,800 | 100 ₹10,000 | 75 ₹7,500 | 125 ₹12,500 | 150 ₹15,000 | 50 ₹5,000 Lowest |
| 1.13 | Ply wood bed top 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge. | 140 | Each | 4,200 ₹5,88,000 | 4,225 ₹5,91,500 | 4,250 ₹5,95,000 | 5,000 ₹7,00,000 | 4,325 ₹6,05,500 | 4,400 ₹6,16,000 | 4,000 ₹5,60,000 Lowest |
| 1.14 | PVC Shoes | 1,340 | Each | 22 ₹29,480 | 25 ₹33,500 | 28 ₹37,520 | 35 ₹46,900 | 33 ₹44,220 | 35 ₹46,900 | 20 ₹26,800 Lowest |
| 1.20FD-1032 Almirah Steel medium W/Sh | ||||||||||
| 1.21 | Re-fixing the existing door shutters in original position with new pin type steel hinges of existing size duly welded as required including denting and necessary welding | 25 | Each Leaf | 80 ₹2,000 | 90 ₹2,250 | 100 ₹2,500 | 35 ₹875 | 122 ₹3,050 | 150 ₹3,750 | 20 ₹500 Lowest |
| 1.22 | Handle chromium plated heavy duty | 35 | Each | 120 ₹4,200 | 122 ₹4,270 | 100 ₹3,500 Lowest | 130 ₹4,550 | 122 ₹4,270 | 150 ₹5,250 | 100 ₹3,500 Lowest |
| 1.23 | Lock 6 lever with deuplicate key ISI marked with round shape of MS key plate as approved | 57 | Each | 120 ₹6,840 | 122 ₹6,954 | 110 ₹6,270 | 130 ₹7,410 | 122 ₹6,954 | 150 ₹8,550 | 100 ₹5,700 Lowest |
Tender Value
₹45.0 L
EMD Value
₹90,000
Closing Date
6 Nov 2025, 6:00 pmClosed
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DISTT- BURDWAN, STATE-WEST BENGAL PIN-713420
As per BOQ Documents
2025_MES_735427_1
8500-429/E8
Open Tender
Civil Works
Works
180 days
PANAGARH
As per Tender Documents
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹90,000
8 Dec 2025
16 Oct 2025
7 Nov 2025
16 Oct 2025
6 Nov 2025
30 Oct 2025
Amount
WOODEN/STEEL/TP FURNITURE Removing/taking out carefully old unserviceable worn out/components/ parts as mentioned here-in-after of the following wooden/steel/TP furniture without disturbing the other parts and supply and fixing new parts with material and labour as specified and as appended below, made to shape & size all as per drawing and as directed and made to finishing to receive paint /polish and necessary welding if required, to bringout the new serviceable condition all as specified, directed and shown on drawing:-
FD/E6/MAP/08(R) Bed Hard MAP
Pre laminated particle board from the head board frame (Size of Board : 610mm x 330mm)
Pre laminated particle board from the foot board frame (Size of Board : 610mm x 220mm )
Ply wood bed top 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge.
PVC Shoes
FD-1032 Almirah Steel medium W/Sh
Re-fixing the existing door shutters in original position with new pin type steel hinges of existing size duly welded as required including denting and necessary welding
Handle chromium plated heavy duty
Lock 6 lever with deuplicate key ISI marked with round shape of MS key plate as approved
3 way locking device as per drg.
Leg made out of MS sheet 1.00mm thick in its original position duly welded as per drg.
Shelf of existing size and shape made out of MS sheet 1.00mm thick
TP Chair Executive
Back frame with Dimensions as shown on drngs. Back shall be of 18/19mm thick hot presed ply wood upholstered with fabric and moulded polyurethane foam. The back frame shall be designed with contour lumber supports for extra conform with PVC lapping all arounds complete all as specified and directed.
Seat frame of size 510x470x60. seat shall be of 18/19mm thick hot presed ply wood upholstered with fabric and moulded polyurethane foam complete all as specified and directed.
Hand Rest with Black intergral skin polyurethane reinforced with MS insert. It shall be scratch and weather resistant complete all as specified and directed
Seat machine with Black intergral skin polyurethane reinforced with MS insert. It shall be scratch and weather resistant complete all as specified and directed
Hydraulic of Chair Computer and providing/fixing of new Hydraulic as per drawing.
Pedestal assy injection moulded in black 30% glass filled nylon. A 10.5mm dia forged bright sinc plated MS castor pin is of press fitted into each prong for holding the castor. It is 600mm pitch centre dia complete all as specified and directed.
FD-1029 Locker Steel/ Locker Bed Side
Taking out of broken door shutter from Almirah Large Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting . All as directed by Engineer-in-Charge and shown on drawing
Hasp & stappples of size 150 mm long chromium plated
Handle of size 100 mm long 'D' Type chromium plated
Hanging rod made out of 20mm dia chromium plated pipe 500mm long
FD-277 Peg Table
Leg made out of 1st class teak Wood seasoned of size 30x50x362mm high
Top rail made out of 1st class hardwood teak of size 20mm x 40mm x380mm
Top made out of 18mm pre laminated particle board one side laminated exterior grade with 4mm teak wood beading all around
PVC shoes
FD/MAP-II/03 Table dining 6 Pers (MAP )
Table top made out of 18/19mm thick prelaminated particle board one side teak veenered with teak wood beading all around
Leg of size 750x45x90mm made out of 1st class well seasoned teakwood duly fixing PVC rubber shoe at the bottom of legs with mild steel screws
Long rail of size 1500 x 45 x 90 mm made out of 1st class well seasoned teakwood
Short top rail of size 900 X 45 X 90 MM . made out of 1st class well seasoned teakwood
MS Right angle of size 150 x 30 x 5 mm
PVC Shoes
FD-229 chair Easy
Front Legs made out of 1st class HW well seasoned (Teak)
Front rail of seat frame (Hole should be 12.5mm apart of each other), made out of 1st class HW well seasoned (Teak)
Side Rail, made out of 1st class HW well seasoned (Teak)
Back Rail, made out of 1st class HW well seasoned (Teak)
Arm Rest, made out of 1st class HW well seasoned (Teak)
Supply and weaving with 2 mm thick new white plastic cane oval shape Godrej pattern and beading with 4mm thick new white plastic cane make Ajay /premier as approved by GE
FD-275 Table writing
Top made out of 18mm particle board one side laminated exterior grade with 4mm teak wood beading all around
sides made out of 19mm prelaminated particle board one side teak veneered
Shutter made out of 19mm thick prelaminated particle board one side teak veneered bonded with phenol formaldehyde exterior gde
Drawers made out of prelaminated particle board & 1st class well seasoned teakwood for sides and front & 6mm thick commercial plywood for bottom of drawers
MS butt hinges 50mm medium wt cold rolled mild steel.
stainless steel handle 50mm
plywood back of table writing & supply & fix new 6mm thick 5 ply plywood commercial BWR gde type BB fixed with 20mm mild steel screws
legs made out of 1st classs well teak wood
long rail made out of 1st class well seasoned teak wood
short rail made out of 1st class well seasoned teak wood
long stiffiner made out of 1st class well seasoned teak wood
Short stiffiner made out of 1st class well seasoned teak wood
PVC shoes
FD-281 Sofa single seater
Front legs made out of Teak wood well seasoned in existing shape and size
Rear legs made out of Teak wood well seasoned in existing shape and size
Front rail made out of Teak wood well seasoned in existing shape and size
Back rail made out of Teak wood well seasoned in existing shape and size
Arm rest made out of Teak wood well seasoned in existing shape and size
Back wooden bearers made out of Teak wood well seasoned in existing shape and size
Bottom wooden bearers made out of Teak wood well seasoned in existing shape and size
Cushion 100 mm thick x 40 density of size 530x560mm covered with new tapestry cloth duly stitched.
FD-1004 Table office clerk steel
Top made out of 18/19mm thick prelaminated particle board one side teak veneered and other side balancing white with 19x4mm teak wood beading duly french polished all around the top.
Internal locks 40mm 4 lever with duplicate keys of approved quality.
Drawer of existing size and shape made out of MS sheet 1.00mm thick. All as shown on drg.
Necessary welding in drawer to make functional as per existing size and shape. All as shown on drg.
PVC shoe
FD-1003 Table office officer steel
Top made out of 18/19mm thick prelaminated particle board one side teak veneered and other side balancing white with 19x4mm teak wood beading duly french polished all around the top.
Internal locks 40mm 4 lever with duplicate keys of approved quality.
Drawer of existing size and shape made out of MS sheet 1.00mm thick. All as shown on drg.
Necessary welding in drawer to make functional as per existing size and shape. All as shown on drg.
PVC shoe
FD/MAP/II/05 Chair Dinning
PVC seat 4mm thick existing size in its original position all as shown on drg
Front legs made out of Teak wood well seasoned in existing shape and size
Rear legs made out of Teak wood well seasoned in existing shape and size
Front rail of seat frame made out of Teak wood well seasoned in existing shape and size
Side rail of seat frame made out of Teak wood well seasoned in existing shape and size
Back rail made out of Teak wood well seasoned in existing shape and size
Short stiffener made out of Teak wood well seasoned in existing shape and size
Back rest batten made out of Teak wood well seasoned in existing shape and size
PVC Shoe
FD/MAP/II/04 Repair of Chair Dinning
12mm ply seat of existing size in its original position all as shown on drg
Front legs made out of Teak wood well seasoned in existing shape and size
Rear legs made out of Teak wood well seasoned in existing shape and size
Front rail of seat frame made out of Teak wood well seasoned in existing shape and size
Side rail of seat frame made out of Teak wood well seasoned in existing shape and size
Back rail made out of Teak wood well seasoned in existing shape and size
Short stiffener made out of Teak wood well seasoned in existing shape and size
75mm thick 32 density cushion and covered with new tapestry cloth duly stitched.
Back rest batten
PVC Shoe
FD-1031 Almirah Steel large W/Sh
Re-fixing the existing door shutters in original position with new pin type steel hinges of existing size duly welded as required including denting and necessary welding
Handle chromium plated heavy duty
Lock 6 lever with deuplicate key ISI marked with round shape of MS key plate as approved
3 way locking device as per drg.
Leg made out of MS sheet 1.00mm thick in its original position duly welded as per drg.
Shelf of existing size and shape made out of MS sheet 1.00mm thick
FD-99(M) Board Notice 1200x900
Door glass of 4 mm thick of existing shape and size and making functional
Door shutter 2 way of existing shape and size and making functional
Baize green cloth of existing shape and size and making functional
Soft wood board 19 mm thick of existing shape and size and making functional
Wooden frame made of hard seasoned teak wood of existing shape and size and making functional
FD-374 Stool Dressing
Cushion 75 mm thick x 40 density of size 450x380mm covered with new tapestry cloth duly stitched.Make: Kurlon/sleep well
Bottom frame of existing shape & size made out well seasoned teak wood.
FD/E6/MAP/03 Table Computer
Top made of 18 mm thick Pre-laminated Particle board exterior grade of size 561 x 900 mm
Tray made of 18 mm thick Pre-laminated Particle board exterior grade of existing shape & size
Drawer of existing shape & size, made of 18 mm thick Pre-laminated particle board exterior grade
Key board tray of existing shape & size, made of 18 mm thick Pre-laminated particle board exterior grade
Nylon buffers
FD-1043 Trestle Store Room Steel
Necessary welding wherever required, restoe the frame in its original position and making the same in functional complete all as per drg
FD-1038 Rack Steel 6 Tier (closed type)
Back to rack steel (closed type) made of MS Sheet of 1 mm thick of eixsting shape and size and making functional
Side made of 1 mm thick MS Sheet as per drg & making functional
Shelve made of 1 mm thick MS Sheet as per drg & making functional
MS angle iron to rack steel closed type as per drg & making functional
FD-281 Sofa set 4 Seater
Front Leg made out of Teak wood well seasoned
Rear Leg made out of Teak wood well seasoned
Front Rail made out of Teak wood well seasoned
Back Rail made out of Teak wood well seasoned
Arm Rest made out of Teak wood well seasoned
back wdn bearers made out of Teak wood well seasoned
bottom wdn bearers made out of Teak wood well seasoned
100 mm thick x 40 density of size 530x560mm covered with new tapestry cloth duly stitched
Material & labour for preparing old painted steel surfaces by removing dents and bends, clipping, welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying two coat of synthetic enamel paint 1st Quality OG/SMOKE GRAY/BLACK OR AS APPROVED by GE paint both inside and outside (outside only in case of round/square pipe/tube) by spray painting all as specified in particular specification and as shown on drawing and as directed by Engineer-in-Charge for the following articles of Steel furniture/TP furniture :- (Note : Second coat will be done after complete dried up of 1st coat as and when ordered and approval of 1st coat from GE
FD/E6/MAP/08(R) Bed Hard MAP
FD-1032 Almirah Steel medium W/Sh
FD-1029 Locker Steel/ Locker Bed Side
TP Chair Executive
FD-1004 Table office clerk steel
FD-1003 Table office officer steel
FD-1031 Almirah Steel large W/Sh
FD/E6/MAP/03 Table Computer
FD-1043 Trestle Store Room Steel
FD-1038 Rack Steel 6 Tier (closed type)
Material and Labour for Complete removal of total existing painting/polish and applying two coats of high gloss polyurethane enamel paint (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss)by spray painting method over and including a coat of pink primer and prepration of surfaces Complete all as specified and as directed for the following furnitures :-
FD-277 Peg Table
FD/MAP-II/03 Table dining 6 Pers (MAP )
FD-229 chair Easy
FD-275 Table writing
FD-281 Sofa set Single Seater
FD/MAP/II/05 Chair Dinning
FD/MAP/II/04 Repair of Chair Dinning
FD-99(M) Board Notice 1200x900
FD-374 Stool Dressing
FD-281 Sofa set 4 Seater
NATIONAL CONSTRUCTION CO (BID ID -3468777)
Jaibalaji Enterprise (BID ID -3468624)
BISWAS ENTERPRISE (BID ID -3468582)
S S ENTERPRISE (BID ID -3468714)
M/s Baba kshatrapal Labour Contract And Construction Co-Operative Society Ltd (BID ID -3468551)
UNIQUE ENTERPRISE (BID ID -3468911)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
PS429.pdf
Tender Documents • 0.80 MB
BOQ_823520.xls
BOQ • 0.41 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .