Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.3 LAccepted-AOC FLAT NO B 401 4TH FLOOR NAVADURGA CO OP HSG SOCIETY LTD PLOT NO 7 SECTOR 19A NERUR EAST NAVI MUMBAI THANE MAHARASHTRA 400 706 | NAVI MUMBAI | THANE | MAHARASHTRA | 400706 | L1 | Accepted-AOC Being lowest tenderer | |
| 2 | L2₹29.2 L+₹2.8 L (10.8%)Rejected-Finance | L2 | Rejected-Finance Being other than Lowest Tenderer | |
| 3 | L3₹30.4 L+₹4.1 L (15.4%)Rejected-Finance | L3 | Rejected-Finance Being other than Lowest Tenderer | |
| 4 | L4₹30.8 L+₹4.4 L (16.7%)Rejected-Finance | L4 | Rejected-Finance Being other than Lowest Tenderer | |
| 5 | L5₹31.0 L+₹4.6 L (17.6%)Rejected-Finance ATLANTIS A2 1501 PLOT NO 05 SECTOR 11 NEAR CLOUD 36 GHANSOLI NAVI MUMBAI 400 701 E 97 CWE SUBS BHANDUP | THANE | MAHARASHTRA | 400701 | L5 | Rejected-Finance Being other than Lowest Tenderer |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
21 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NW) KUNJALI
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8472 REPAIR MAINT TO CERTAIN BR MARINES ASSETS INCLUDING CONNECTED ITEMS IN INNER BREAK WATER JETTY AND ASSOCIATED AREAS AT ND MBI
2022_MES_547319_1
8472/E8
Open Tender
Civil Works
Item Rate
183 days
GE (NW) KUNJALI
Please refer tender documents
7 documents required · 7 mandatory
₹500
Yes
GE (NW) KUNJALI
₹96,000
Yes
25 Jan 2023
24 Aug 2022
23 Sept 2022
1 Sept 2022
21 Sept 2022
7 Sept 2022
24 Aug 2022 - 1 Sept 2022
Amount
Demolition of plain cement concrete of any description and in any position not other wise speifically provided for.
Demolition of reinforced cement concrete of any description and in any position not other wise spcifically provided for.
Taking down cement plaster on brick/surfaces built in cement mortar including raking out joints, hacking for key scrubbing down with water etc complete.
Supply and applying microconcrete of Fosroc, Dr Fixit, or equivalent aroung edges of Dock walls, jetties, corners, grooves, alters, steps, piers and other marine structure after complete cleaning of concrete surface and applying epoxy coat as bonding agent Fosroc's Nitobond or equavalent for bonding between old and new surface, including all lifts, shuttering all as required as per site condition and directed by Engineer-in-Charge.
Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing ready mix polymer plaster and finally finishing the surface all as specified and directed.Make :- Dr.Fixit/Sunanda/Chemestik/Fosrok as aprooved. Note :- (New reinforcement and MS Sections will be measured and paid separately).
Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally covering with Microconcrete and finally finishing the surface all as specified and directed. Make :- Dr. Fixit/Sunanda/Chemestik/Fosrok as aprooved. Note :- (New reinforcement and MS Sections, microconcrete and form work if required will be measured and paid separately)
Supply only ready mix microconcrete mixture. Make : Dr.Fixit/Sunanda/chemestik/Fosrok
Material and labour for Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less all as specified and directed.
M&L for 150mm thick PCC 1:2:4 type B-I using 20mm graded crushed stone aggregates as in floor finished cement concrete surface even and smooth using extra cement complete all as specified and directed by Engineer-in-Charge.
Precast RCC (1:2:4) type BI using 20mm graded crushed stone aggregate as in cover slabs and set incement mortar 1:4, complete all as specified and directed by Engineer-in-Charge. (Reinforcement shall be measured and paid seperately.
Formwork to sides and soffits of floor or roof beams, haunchings, girders, bressummers, lintels cantilevers, shelves including supt-ports, overhangs, etc. Also splays between floors and beams, etc. rough finished surface of concrete.
Formwork to sides of pillars posts, struts, piers, columns and stanchions square, rectanguar or polygonal.
M&L for complete removal of existing treatment on wall surfaces and applying a coat of wall care putty 3mm thick on plastered surfaces, preparatory to distempering and applying two coats of oil bond distemper over a coat of wall primer all as specifed and directed.
M&L for rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete surfaces in ceiling finishing the surface even smooth all as specified and directed.
M&L for preparation of newly plastered surfaces in ceiling, applying three coats of white wash all as specified and directed.
M&L for plastering inCM 1:4, 20mm thick in two coats (15mm under coat plus 5mm finishing coat) using Pidiproof LW+water proofing chemical of Dr. Fixit or euvalent as per manufacturer''s instruction and finishing the surface even and fair. (Water proofing Chemical shall be measured and paid seperately)
M&L for preparation of newly plastered or un plastered wall surfaces, over 10cm girth applying two coats of 100% acrylic, weather resistant emulson over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction
M&L for complete removal of existing plastered wall surface, over 10cm girth preparation of surfaces, applying two coats of 100% acrylic, weather resistant emulson over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction.
M&L for applying thermoplastic paint in letter writing, Nos, Dashes, Arrow etc all as per manufacturer's instruction and all as specified and as directed.
M&L for preparation of new decorated wooden surfaces of any description over 10 cm width or girth, applying a coat of synthetic enamel paint of approved colour all as specified and directed.
M&L for preparation of old surfaces of any description over 10 cm width or girth, applying a coat of synthetic enamel paint of approved colour all as specified and directed.
M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of old steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and directed.
M&L PCC (1:2:4) type B-1 (Using 20mm graded stone aggregate) as in roof/chajja padding for maintaining roof/chajja slope complete all as specified and as directed.
M&L for applying oil bound primer @ 0.40 Litre/Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg/Litre at 25 degree cesius on the prepared dry roof surface and provide and lay 4mm thick APP modifed water proofing membrane reinforced with non-wooven polyster matt with physical properties as given in particular specification. The laying shall got be done through authorized applicator of manufacturer as specified in paticular specifications. Provide over the membrane finishing with two coats of solar reflective bituminous aluminium paint @ 0.10 Kg/sqmas prescribed by manufacturer of membrane including Ten years guarantee on prescribed from complete all as per particular specification, manufacturers instructions and as directed by Engineer-in-Change. Note : Rate including to taking down and re fixing of existing lightning arrestor system including provision of new PCC block for damaged PCC block complete as directed by Engineer-in-Charge.
Removing excavated material & debris exc. 1.50 Km but n exc. 15 Km and depositing where directed, in soil.
Material and labour for applying one coat of solvent free Epoxy primer coat on wall using with coposition of UR Tech CG 2752 and UR Set CG 1054 in the ratio 100.60 Parts by weight Epoxy Primer to be homogeneous mixed, achieved by using a mechanical stirrer machine with agitator blades or alternatively a drill machine with a paddle stirrer. Primer will be applied at coverage of 3 to 4 Sqm per kilograms per coat of Epoxy primer, thickness of each coat shall be 120-150 microns complete all as specified and directed.
Material & labour for cleaning the surface of the stone/concrete in jetty , dock,retaining wall, piers of jetty and bottom portion of deck slab etc above sea with mechanical grinder and specialized water misting techniques applying water jet using a fine nozzle sprinkling system calibrated to spray a fine mist along the stone/concrete surface complete and removing all sea vegetation complete all as specified and directed by Engineer in charge. Note:- Quoted rate shall be inclusive of scaffolding or alternative way of carrying out the work with proper safety instruction required at site.
Material and labour for applying two coats of PU paint of primer DEKGUARD of FOSROC or equivalent over vertical concrete surface in jetty/dry dock above sea level all as specified and directed by Engineer in charge. Note:- Quoted rate shall be inclusive of scaffolding or alternative way of carrying out the work with proper safety instruction required at site.
M&L 10mm dia over mild steel TMT bars, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips etc complete all as specified and directed by Engr-in-charge.
-ditto- all as per item No 30 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
M & L for errection & dismantling of MS tubler double scaffolding (H frame) upto height of 30m & with necessary brazing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green cloths for carring out external face work of walls all as specified & directed.
Supply only Water proofing Liquid. Make :- Dr Fixit or equivalent.
jalandhara construction
georson constructions
SR Construction
HINDUSTAN BUILDERS
Rohit Enterprises
Pragathi Infrastructure Co.
Gaurav Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .