Repair and Renovation of Public Toilet Block situated near SCF 36 Peter England Showroom Sector 19 C Chandigarh under the charge of SDE MCPH Sub Division No 16 Chandigarh Ch To Revenue Head

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, achitrave, holdfasts etc. complete and stacking within 50 metres lead: (DSR No. 15.12)

Of area 3 sq. metres and below (DSR No. 15.12.1)

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unsericeable materials within 50 metres lead. (DSR No. 15.52)

Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-charge. (DSR No. 14.82)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (DSR No. 15.56)

6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing R.C.C. slabs and beams. (DSR No. 13.17)

Disposal of buidling rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (DSR No. 15.60)

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge: (DSR No. 15.44)

15 mm to 40 mm nominal bore (DSR No. 15.44.1)

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. (DSR No. 15.25)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window, sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy tuch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels (DSR No. 8.2)

Granite stone slab of colour black, Cherry/Ruby red (DSR No. 8.2.2)

Area of slab over 0.50 sqm (DSR No. 8.2.2.2)

Regarding terracing of md phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unseviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in-charge (DSR No. 14.13)

12 mm cement plaster of mix: (DSR No. 13.1)

1:4 (1 cement: 4 fine sand) (DSR No. 13.1.1)

Painting top of roofs wih bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete: (DSR No. 12.15)

With residual type petroleum bitumen of grade VG- 10 (DSR No. 12.15.1)

flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska (DSR No. 14.18)

With F.P.S. brick tiles (DSR No. 14.18.1)

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : (DSR No. 12.21)

In 75x75 mm deep chase (DSR No. 12.21.1)

Making khurras 45x45 with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x 1m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. (DSR No. 12.22)

Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 Nos. of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm, including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x 100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer-in-charge. (DSR No. 9.141)

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded solid PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mm x 35 mm x 5 mm, out of which 75 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm x 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm x 100 mm of cross section size 35 mm x 17 mm x 1 mm at each comer, Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with thehelp of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Isngle piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specialization and direction of Engineer-in-charge (DSR No. 9.142)

Decorative finish (wood grained finish) (DSR No. 9.142.2)

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including making food the walls etc. concealed pipe, including painting with anti coorosive bitumasic paint, cutting chases and making good the wall : (DSR No. 18.11)

20 mm dia nominal bore (DSR No. 18.11.2)

Providing and placing on terrace (at all floor levels) polythylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR No. 18.48)

Providing and fixing Ist quality ceramic glazed wall tile conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all coloures, shades except burgundy, bottle green, black of any size as approved by Enigneer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cment : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, includign pointing in white cement mixed with pigment of matching shade complete (DSR No. 8.31)

Providing and laying Polished Granite stone flooring in required desing and patterns, in linear as well as curvilinear portions of the building al complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing, and polishing etc. all complete as specified and as directed by the Engineer-in-charge (DSR No. 11.56)

Polished Grantie stone slab of colour Black, Cherry/Ruby Red or equivalent (DSR No. 11.56.1)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (DSR No. 13.88)

Distempering with Ist quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) contents less than 50 gram/litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour (DSR No. 13.81)

Old Work (one or more coats) (DSR No. 13.81.1)

Finishing walls with textured exterior paint of required shade: (DSR No. 13.111)

Old Work (one or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface (DSR No. 13.111.1)

providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (DSR No. 17.1)

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (DSR No. 17.1.1)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, including flush pipe, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (DSR No. 17.2)

W.C. pan with ISI marked white solid plastic seat and lid (DSR No. 17.2.1)

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required: (DSR No. 17.5)

Single half stall urinal with 5 litre P.V.C. automatic flushing cistern (DSR No. 17.5.1)

Providing and fixing urinal partition 10mm thick High Stainless Steel of siz 1.5 x 2.75 fixed in position with clams holding the Steel Partition. All exposed edges to be grinded with smooth finish to the entire satisfaction of engineer-in-charge including carriage of material to site of work, to the entire satisfaction of Engineer-in-charge including carriage of material to site of work (Fixed on slopping back wall before fixing ceramic tiles) (NSI)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: (DSR No. 17.7)

White Vitreous China Flat back was basin size 550x400 mm with single 15mm C.P. brass pilar tap (DSR No. 17.7.4)

Extra over and above item No. 17.7.4 of DSR (Sr. No. 29) for using under counter washbasin of size 550 x 445 x 190 mm as per archtechural drawings, code x0494 or parryware (niagara) model with auto closing piller cock system code G 2013A 1 of parry ware (lapis neo) with adustable brackets (special for under counter) to entire satisfaction of Engineer-In-charge. (NSI)

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (DSR No. 17.31)

Providing and fixng 8 mm dia C.P./ S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer-in-charge (DSR No. 17.16A)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. (DSR No. 17.28)

Semi rigid pipe (DSR No. 17.28.1)

32 mm dia (DSR No. 17.28.1.1)

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. (DSR No. 17.71)

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. (DSR No. 17.73)

450 mm towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. (DSR No. 17.73.1)

Providing and fixing toilet paper holder: (DSR No. 17.34)

C.P. brass (DSR No. 17.34.1)

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: (DSR No. 18.49)

15 mm nominal bore (DSR No. 18.49.1)

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. (DSR No. 18.51)

15 mm nominal bore (DSR No. 18.51.1)

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete: (DSR No. 18.18)

18 mm nominal bore (DSR No. 18.18.2)

Providing and fixing grab rail of stainless steel pipe 1-1/4" and fitting of grade AISI 304 as per JIS standard 3448 including fitting and fixing or pipe with clamps at 1.00 m spacing including cutting and making good the walls complete as per direction of Engineer-in-charge. (NSI)

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. (DSR No. 9.97)

200x10 mm (DSR No. 9.97.3)

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (DSR No. 9.101)

Twin rubber stopper (DSR No. 9.101.2)

Providing and fixing of superior quality heavy duty ISI marked sanitary napkin vending machine, incinerator, Battery and happy days pad complete in all respects (NSI)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required (DSR No. 10.25)

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar work (DSR No. 10.25.2)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete (DSR No. 13.80)

Providing and fixig square-mouth S.W. gully trap clss SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight f cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: (DSR No. 19.4)

100x100 mm size P type (DSR No. 19.4.1)

With Commom burnt clay F.P.S. (non modular bricks of class designation 7.5 (DSR No. 19.4.1.1)

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: (DSR No. 19.2)

150 mm diameter S.W. pipe (DSR No. 19.2.2)

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with floating coat of neat cement and making necessary channels for the drain etc. complete: (DSR No. 19.21)

For pipes 100 to 250 mm diameter (DSR No. 19.21.1)

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality. (DSR No. 19.19)

L D- 2.5 (DSR No. 19.19.1)

Rectangular shape 600x450 mm internal dimensions (DSR No. 19.19.1.1)

Providing and fixing soap dispensor and fitting complete in all respects (NSI)

Providing and fixing acralicsheet with silver remark engraving plate 12"x18" in position at required place to the entire satisfaction of Engineer-in -charge (NSI)

Providing and fixing Sun board printing with lamination on 5mm sun board of size 6' x 2' to be fixed at the height of 12' from NGL, leveled in position to the entire satisfaction of Engineer-in-charge (NSI)

Providing and fixing acrylic sheet of with silver remark engraving plate 12" x 12" in position at required place to the entire satisfaction of Engineer-in-charge (NSI)

Providing and fixing Sun board printing with lamination on 5mm sub board of size 24" x 30" to be fixed at the height og 12' from NGL, leveled in position to the entire satisfaction of Engineer-in-charge (NSI)

Providing and fixing 50 watt LED flood light with bracket out side on the wall complete in all respects (NSI)

Providing and fixing of Crompton Greeves 1 HP water pump with help of fasterners to be fixed at site as per entire satisfaction of Engineer-in-charge (NSI)

Providing, fixing and installation of inverter with Battery of Minimum back up of 8 hours including the cost of wiring, switches board etc. complete in all respect to the entire satisfaction of IEC Inverter (with 2 year warranty period) Make Microtek/V-Guard/Luminious.Battery 12V/500h tubular battery make Exide/Microtek/Luminious etc (With 3 year Warranty Period (NSI)

Providing and fixing of 1.5 mm single core PVC insulated copper cable for wiring at Toilet Block. (NSI)

Providing and fixing of 0.75 mm single core PVC insulated copper cable for earthing at Toilet Block (NSI)

Providing and fixing of LED Round Concealed Light complete set type 15 W Make: Crompton/Havells (NSI)

Supplying and fixing metal box of following sizes (nominal size) on surface or In recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required (NSI)

75 mm x 75 mm x 60 mm deep (NSI)

100 mm x 100 mm x 60 mmm deep (NSI)

150 mm x 150 mm x 60 mmm deep (NSI)

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required (NSI)

5/6 amps switch (NSI)

3 Pin 5/6 A socket outlet (NSI)

Supplying and fixing following size/ modules, GI box alongwith mdular base & cover plate for modular switches in respect as required (NSI)

8 Module (125 mm X 125 mm) (NSI)

Supply and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (NSI)

3 Pin 5/6 A socket outlet (NSI)

Providing and fixing ceiling fan 1200mm (48") sweep including all accessories complete to entire satisfaction of EIC. Make: Crompton/ Usha/Khaitan/Bajaj (NSI)

Providing and fixing LED Tube light complete set type 36W, 1=4ft, Make: Philips/Crompton/Havells (NSI)

Providing and fixing of exhaust fan of double ball bearing 12" sweep including all necessary accessories complete to entire satisfaction of EIC. Make: Crompton/Havells/Bajaj/GEC (NSI)

Wiring for light point/fan point/exhuast fan point/call bel point with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable in plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor singlecore cable etc. as required (NSI)

Wiring for light/power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. (NSI)

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (NSI)

Double Pole (NSI)

Supplying and fixing metal box of following sizxes (nominal size) on surface or inrecess with suitable size of phenolic laminated sheet cover in front including painting etc as required. (NSI)

200mm x 150mm x 100 mm

Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required (NSI)

15/16 amp switch (NSI)

6 pin 15/16 amp socket outlet (NSI)

Supplying and fixing following way, single pole and netural, sheet steel, MCB distribution board consumer unit 240 volts, on surface/reess, complete with timed copper bus bar netural bus bar, earth bus bar, hinged front acrylic cover for the MCB knobs, detachable gland plate, interconnections, phosphatized and powder painted including earthling etc. as required (But without MC/PCCB/Isolator) 2*4 way (NSI)

Note:- The old material to be recovered from site will be returned to the department and will be recorded in M.A.S. register.

Please Enable Macros to View BoQ information