Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance KULLANDI STREET M PALLIPATTI POST METTUR TALUK SALEM DISTRICT 636 458 | METTUR | SALEM | TAMIL NADU | 636458 | Admitted-Finance |
| 3 | Admitted-Finance NO 107 ASHOK NAGAR GANDHI NAGAR POST NEYVELI 607 308 | NEYVELI | CUDDALORE | TAMIL NADU | 607308 | Admitted-Finance |
| 4 | Admitted-Finance NOCHIPALAYAM AUTHUR PO KARUR 2 | Admitted-Finance |
| 5 | Admitted-Finance NO 103 KAMARAJ NAGAR 1ST STREET BHAVANI 638301 ERODE DT | BHAVANI | ERODE | TAMIL NADU | 638301 | Admitted-Finance |
Tender Value
₹19.5 L
EMD Value
₹19,500
Closing Date
12 Aug 2020, 2:00 pmClosed
SE GCC CBE
182,DR.SUBBARAYAN STREET, TATABAD, COIMBATORE DT - 641 012.
08/2020-21 of SE GCC CBE
2020_EB_173936_1
08/2020-21 of SE GCC CBE
Open Tender
Civil Works
Item Wise
90 days
Coimbatore
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹19,500
Yes
26 Aug 2020
29 Jul 2020
12 Aug 2020
29 Jul 2020
12 Aug 2020
29 Jul 2020
Amount
Clearing Light jungle and disposing off to a place away from the site as directed by the Engineer in charge including all Labour charges,T&Ps etc., complete.
Earth work excavation for foundation in HGS and and depositing on bank with initial lead of 10 m and initial lift of 2 m in Hard stiff clay Stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders as per standard Specification as directed by the Engineer at site.
Earth work excavating for foundation and depositing on bank with initial lead of 10m and initial lift of 2 m in soft disintegrated rock, laterite, soft rock (or) kankar not requiring blasting as per standard Specification as directed by the Engineer at site.
Earth work excavating for foundation and depositing on bank with initial lead of 10m and initial lift of 2 m in Medium Rock and Dense Medium Rock not requiring blasting as per standard Specification as directed by the Engineer at site.
Earth work excavation for Foundation in Hard rock by Wedging and Chiseling and trimming to proper shape where blasting is prohibited and stacking for measurements including all leads, lifts etc., as per standard specification and as per instruction of the Engineer at site.
Providing Anti Terminate Treatment over the Plinth Building area in 3 stages ( foundation stage, Flooring stage and Outside area ) including cost of all materials, labour, lead, lift etc., as per standard Specifications and directed by the Engineer incharge complete.
Filling the M.sand for filling in the foundation and floor including cost of sand, filling charges as per standard specification(watering & consolidation with all leads and lifts etc., complete.
Plain cement concrete in CC 1:3:6, using 40 mm HBG metal, for foundation/Padding Concrete including cost of all materials, labour charges including consolidation, curing, all leads, lifts, etc., as per standard Specification complete.
Reinforced cement concrete in CC 1:1½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Column and footing including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)
Reinforced cement concrete in CC 1:1½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Grade beams and Plinth beams including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)
Re-Filling with Excavated Earth in foundation and Basement including cost of all Labour, lead, lfit etc., complete.
Filling the low lying areas with gravel and consolidating in 150mm thick layers, well rammed with all leads and lifts , watering, as per standard specification, etc., complete.
Brick work in C.M. 1:5 using chamber burnt class II bricks, iincluding, cost of cement, all materials, labour, curing, all leads and lifts, etc complete as per Standard Specification.
Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Column up to Ground level including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)
Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Column above Ground level including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)
Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for RCC Lintel including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)
Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for Sunshade-0.60M width including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)
Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for Roof beams including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)
Reinforced cement concrete in CC 1:1 ½ :3, mix using 12mm to 20mm HBG downgraded metal machine crushed for Roof slab 150 mm thick including cost of cement, all materials, labour, curing, all leads,lifts,cost of shuttering as per Standard Specification. (But excluding cost of steel reinforcement.)
Weathering course with one course of Solar Reflective Ceramic Tile, size of 305x305x7 mm over spread concrete of PCC 1:2:4 mix for a thick of 75 mm for fixing required slope including cost of all materials cement labour, curing leads lifts etc., complete.
Providing steel reinforcement with MS/RTS rods of reputed approved make for reinforced concrete works, including cost of steel MS/RTS rods, binding wire, Minor T & Ps labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift etc., complete as per Standard Specification
Plastering with CM 1:3, 10 mm thick for Ceiling & Sunshade bottom including cost of cement, all materials, labour, curing, leads and lifts etc., complete.
Plastering with CM 1:5, 12 mm thick for Wall surface including cost of cement, all materials, labour, curing, leads and lifts etc., complete.
Floor finsinhing with CM 1:3, 20 mm thcik over PCC 1:4:8. using 40 mm metal, 100 mm thick for Store room including cost of cement, all materials, labour, curing, leads and lifts etc., complete.
Outer colour washing with two coats using ready mixed Weather Proof Exterior Emulsion (First quality - Apex or its equivalent) of approved quality and colour over a coat of exterior emulsion water based primer exterior surfaces including through scrapping, clan removal of dirt, cost of all materials, scaffolding, Labour, Lead, Lift etc., complete and including necessary crack filling paste, putty whereever required.
Colour washing with two coats of Oil Bound distemper over a coat of water based primer with applying two coats of Wall Putty paste of approved quality over the priming coat one coat by one coat and making the interior walls smootheing by scrapping with nice sand paper for interior surfaces as directed by the engineer at site including cost of all materials such as Oil bound distemper, Wall Putty paste, Primer and scaffolding, Labour, Lead, Lift etc., complete.
Painting with 2 coats of white Oil distember over 1 coat of Cement Primer for Interior ceiling surface including cost of all materials, labour, lead, lift, brush, etc., complete.
Manufacturing and fixing of UPVC (Unplasticized polyvinyl chloride) slided Windows of required section with Shutter inner lock glazing clips rubber gaskets sliding wheel & 5 mm thick plain glass Panelling including cost of all materials, locking arrangement, labour, lead, transport, lead, lift etc., comple
Manufacturing and fixing of UPVC (Unplasticized polyvinyl chloride) Ventilator size 0.75 X 0.60 m fully galzed Lover type as per standard specifgications with frame and frosted glass 4 mm thick including coast of all materials, labor, lead, lift etc., complete.
Supplying and fixing of Doors (Single leaf) using MS angle 50x50x6mm for door frame and 40x40x6mm for shutter frame and shutter 18 Gauge MS Sheet with stiffners both front and back M.S. Flat of size 32x3mm with 6" hinges heavy duty, all Aluminium anodized fittings, including Painting two coats ready mixed enamel paint with One coat of primer approved quality and colour cost of all materials, leads, lifts labour etc.,
Painting 2 coats of Enamel Paint over 1 coat of Red Oxide for Steel Doors & Windows with approved quality & colour including cost of all materials, labour, lead, lift etc., complete.
Supplying and laying of Non - slippery type Vetrified tiles for Control Room etc., of approved quality and colour laid in CM. 1:2, 12 mm thick and pointing with white cement using 0.40Kg./m2 including finishing joint and pointing Flush with tiles surface including cost of cement all materials Labour ,curing , leads and lifts etc., complete.
Dadooing wall with glazed tiles of approved colour of required size with 6 mm thick of approved quality laid in CM.1:2 ,12 mm thick after scrapping & cleaning the existing wall surface as instructed and pointing with white cement using 0.40Kg / m2 including finishing the joint and pointing flush with tiles surface including cost of cement all materials labour curing , leads lifts etc., as per standard specification complete.
Supplying and fixing white glazed earthen ware (European type) water closet of size 20" with flushing cistern of approved quality with 'P' and 'S' Trap embedded the closet with trap to shape in position with brick jelly concrete 32:12:5 using 40mm hard broken brick jelly finishing the top to required shape etc., including cost of all materials labour, lead ,lift etc., complete.
Supplying Godrej Navtal lock of approved type with 6 livers including cost of locks with three keys leads, lead etc., complete.
Supplying and fixing white / Colour glazed earthen ware wash basin of size 550 X 440 mm in size reputed make with Gate valve including cost of all fitting materials lead lift Transporting labour charges etc., complete.
Supplying and fixing of Best quality of Mirror 600 X 450 mm in size with soap tray, Towel rod over hand Wash basin complete.
Supplying & fixing of PVC pipes (10Kg/cm2) with ISI make PVC pipe 40 mm dia for water Supply arrangements including cost of Pipe, Bend, Tee, L- Bow, reducer etc., as required of all mateials, lead, lift , Labour charges ete. Complete.
upplying & fixing of PVC pipes (10Kg/cm2) with ISI make PVC pipe 25 mm dia for water Supply arrangements including cost of Pipe, Bend, Tee, L- Bow, reducer etc., as required of all mateials, lead, lift , Labour charges ete. Complete.
Providing and fixing 12mm C.P.Pillar cock for water supply tap with angle stand including cost of pipe and labour fixing charges lead, lift etc., complete.
Supplying & fixing of GM Gate Valve with ISI make 40 mm dia for PVC water Supply arrangements including cost of Pipe, Bend, Tee, l - Bow, reducer etc., as required of all mateials, lead, lift , Labour charges ete. Complete.
Supplying & fixing of GM Gate Valve with ISI make 25 mm dia for PVC water Supply arrangements including cost of Pipe, Bend, Tee, l - Bow, reducer etc., as required of all mateials, lead, lift , Labour charges ete. Complete.
Supplying & Fixing of GI angle size of (50mmx50mmx6mm) fixing at 600mm C/c for Cable duct inside the Control room including all labour, lead, lift etc., complete
Supplying and Laying of 110 mm dia. 4 Kg/cm2 PVC pipe for Rain water fall pipe including cost of all materials, labourm lead, lift etc., complete.
Supplying and fixing of Cast Iron man hole cover heavy duty of approval quality size 600 x 600 mm to cover the man hole including cost of all materials, lead, and lift, etc., complete.
Wiring with 2.50 sq mm PVC unsheathed multistrand copper cable of 650 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall and covering with 3mm thick hylum sheet over TW switch box with continuous earth wire connection 14 SWG TC wire and making good the damaged portion of masonry for PVC concealed light point.
Wring with 2.50 Sq mm PVC unsheathed multistrand copper cables of 650V Grade in Suitable PVC regid pipe concealed in wall and ceiling with PVC accessories in flush with wall using suitable TW switch box with 3mm tick hylum sheet covers for 15 A 3 pin non inter locking CS plug including pin top with continuous earth wire connection using 14 SWG TC wire and making good the damaged portion of masonry of PVC concealed plug point.
Wring with 2.50 Sq mm PVC unsheathed multistrand copper cables of 650V Grade in Suitable PVC regid pipe concealed in wall and ceiling with PVC accessories in flush with wall using suitable TW switch box with 3mm tick hylum sheet covers for 5 A 3 pin non inter locking CS plug including pin top with continuous earth wire connection using 14 SWG TC wire and making good the damaged portion of masonry of PVC concealed plug point.
Supplying and fixing of Slanding Holder with LED 14W Bulb with ISI approved quality including cost of all materials, labour, lead, lift etc, complete.
Supplying and fixing of Twin type Decorative type Led Tube 4' 20W fittings with Copper choke & slim type LED tube and fittings complete with ISI mark, electronic choke and condenser with conduit type suspension from ceiling with PVC unsheathed leads from terminal to the fittings with tube including cost of all materials, lead, lift, fixing charges etc., complete.
Supplying and fixing of 4’ 20W single LED Tube light and fittings complete with ISI mark, electronic choke and condenser with conduit type suspension from ceiling with PVC unsheathed leads from terminal to the fittings with tube including cost of all materials, lead, lift, fixing charges etc., complete.
Supplying and fixing 1200mm (48") swap AC ceiling fan with 600mm down rod with approved best quality make of standard specification with electronic regulators and switch, including cost of all materials Labour fixing charges etc., complete.
Supplying and fixing of single box Street light type with Led 30 W light fittings with ISI markwith GI pipe stand pipe for exterior light unsheathed leads from terminal to the fittings with tube including cost of all materials, lead, lift, fixing charges etc., complete.
Disposal of Excess earth foraway from the site all leads and lifts etc., complete as directed by the Engineer at site.
Supplying and fixing of 1000 Liters PVC water tank (white coated) of approved quality with ISI mark including cost of all materials labour for connection , lead, lift etc., complete, as per standard specification.
Labour charges for writing Name Board/Slogans over the plastered surface wall in the control room including cost of paint & all materials, labour, lead, lift, etc. complete, as per standard specification.
Supplying & stick the TNEB Embelem in front of control room entrance door including cost, lead, lift, etc. complete, as per standard specification.
Fabricating,& supplying and fixing of monkey ladder gate using structural steel angles, flats, plates, squares etc., as per specification and as directed and painting with two coats of approved colour enamel paint over one coat of red oxide primer including cost of steel and painting materials, lead, lift, labour, as per standard specification, etc., complete.
Supplying and fixing of Corrugated galvanised iron (CGI) sheets for pocket store roofing & wall clading using structural steel angles, flats, plates, squares etc., as per specification and as directed and painting with two coats of approved colour enamel paint over one coat of red oxide primer including cost of steel and painting materials, lead, lift, labour, as per standard specification, etc., complete.
Dismantling of existing Control room Wall & flooring structure including all labour charges, transport, lead, lift as directed by the Engineer at site etc., complete.
SGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only
CGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only
Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only
Sp Constructions
mk constructions
JK ENGINEERS
ASAITHAMBI.M
C.PERIYASAMY
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .