Repainting Work Block III to VI, MGPGIDS

Amount

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth ncluding necessary repairs to scratches etc complete

Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface - water thinnable cement primer.

Finishing walls with premium acrylic smooth exterior paint with silicon additives of required shade - old work (two or more coats applied @ 1.43 ltr / 10 sqm) over existing cement paint surface

Finishing walls with acrylic smooth exterior paint of required shade - old work (one or more coat applied @ 0.90 ltr / 10 sqm)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - One or more coats on old work

French spirit polishing - one or more coats on old work

Repainting G.I.pipes and fitings with synthetic enamel white paint with one coat of approved quality - 25mm diameter pipe

Repainting G.I.pipes and fitings with synthetic enamel white paint with one coat of approved quality - 32 mm diameter pipe

Repainting G.I.pipes and fitings with synthetic enamel white paint with one coat of approved quality - 40 mm diameter pipe

Providing and fixing in position UPVC moulded elbow (Finolex / jain)(1 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 110mm dia

Providing and fixing in position UPVC moulded plain coupler (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 110mm dia

Providing and fixing on wall / column face unplasticed - PVC soil and waste pipes (type - B) conforming to IS : 13592- 1992 including jointing with seal ring conformation to IS : 5382 leaving 10mm gap for thermal expansion - single socked pipes -110mm diametre

Providing and fixing glazing in aluminium door, window , ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings ( cost of aluminium snap beading shall be paid in basic item) - with float glass panes of 5.50 mm thickness.

Taking out existing wooden door shutter ,repair by cutting painting etc.and refixing of repaired door shutters to existing door frames , including replacement of hinges with screws etc. as require all complete

Acid cleaning for the existing Mosaic floors , glazed tiles work and removing the stains and decays to give a glassy look etc. complte (The Acid used shall be 32% concentrated hydrochloric acid after taking on the precautionary measures)

Raking out joints in lime or cement mortarand preparing the surface for repointing or replastering , including disposal of rubbish to the dumping ground within 50 metres lead

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq.metres and under including cutiing the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead - with cement mortar 1:4 (1 cement : 4 coarse sand)

Providing two legged scaffolding using 15 cm diameter blue - gum posts or casurina posts or best quality bamboo - posts of 4m over all length (3.0m height + 0.5 m projection + 0.5 into the ground) the distance between the two rows being 1.25 m and the spacing of posts with 0.5 m overlap on either side and braces to step up and providing a platform with country wood planks of 40mm thick and 1m width etc in a complete form using coir and nails 1 m run (Rate of scaffolding for a height of 3 m and lenghth of 1 m)

Exta for Providing two legged scaffolding for every additional height of 2.5 m (Rate for scaffolding for a height of 3 m and length of 1m)

Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown bitumen 85/25 or 90/15 conforming to IS:702 applied hot @ 1.45 kg per sqm of area for each course , second course of roofing felt type 3 grade - I (hessian based self finished bitumen felt) and fourth and final course of stone grit 6mm and down size of pea- sized gravel spread at 6 cubic diameter per sqm including preparation of surface but excluding grading complete with - Bitumen felt (hessian base) type 3 grade I conforming to IS : 1322

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - in cement mortar

Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead

Providing and laying pressed clay tiles as per approved pattern 18mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound , laid over a bed of 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete

Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 3.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:4 ( 1 cement : 4coarse sand)

Extra for brick work / AAC block masonry / Tile brick masonry in super structure above foor V level , for each four floors or part thereof by mechanical means

12mm cement plaster of mix :Cement mortar 1:4 (1 cement : 4 fine sand)

Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof

M/S Durai ariraman

V Kaviyarasan

Thanigavel

T Vasanthraj

ASOKAN V

K Ramayan

M/s Surya Builders

B Akbar