GE/AF/ADM-15/2024-25

Amount

Painting lines, dashes, arrows, letters, strips, circles etc. on old painted road pavements/ conrcete surfaces and the like exceeding 10 cm width with one coat of water thinable/matt finished road marking paint using mechanical marking machine as described in note 4.1(a) here in below of shade approved by GE including preparation of surfaces to the entire satisfaction of Engineer in Charge, complete all as specified.

Painting lines, dashes, arrows, letters, strips, circles etc. on new road pavements/ conrcete surfaces and the like exceeding 10 cm width with one coat of water thinable/matt finished road marking paint using mechanical marking machine as described in note 4.1(a) here in below of shade approved by GE including preparation of surfaces to the entire satisfaction of Engineer in Charge, complete all as specified.

Painting lines, dashes, arrows, letters, strips, circles etc. on old painted road pavements/ conrcete surfaces and the like not exceeding 10 cm width with one coat of water thinable/matt finished road marking paint using mechanical marking machine as described in note 4.1(a) here in below of shade approved by GE including preparation of surfaces to the entire satisfaction of Engineer in Charge, complete all as specified.

Painting lines, dashes, arrows, letters, strips, circles etc. on new road pavements/ conrcete surfaces and the like not exceeding 10 cm width with one coat of water thinable/matt finished road marking paint using mechanical marking machine as described in note 4(a) here in below of shade approved by GE including preparation of surfaces to the entire satisfaction of Engineer in Charge, complete all as specified.

NOTES APPLICABLE TO SERIAL ITEM 1 TO 4 ABOVE: (a) Mechanical pavement marking machine shall be line lazer IV 3900 and 5900 of M/s Graco or equivalent as approved by GE. (b) Thickness of paint shall not be less than 40 micron (dry film thickness) for each coat after application. (c) Contractor will fix 40 mm wide masking tape on both sides of the surface to be painted to avoid spillage of paint. (d) Surface shall be throughly cleaned and dusted so that all the dirt, scales, oil etc. shall removed before painting is started.Any existing paint showing extesive flaking, bleaching or saponification on old painted surface, the same shall be removed by scrapping and washing with wire brushes, sand etc

One coat of white wash on old wall surfaces, including preparation of surfaces, complete all as specified.

Applying two coats of synthetic enamel paint (in patches) over a coat of primer including preparation of old painted brick / stone / concrete / plaster surfaces of any description not otherwise described over 10cm width or girth complete all as specified.

Edge Scraping of runway, PTT, Taxi tracks, Dispersal area by cutting cutting grass, vegetation, shrubs, bushes, small trees etc. manually to the entire satisfaction of Engineer-in-Charge including sweeping and removal of entire rubbish/cut grass/ vegetation etc. outside MoD land complete.

Cleaning of open drains/Nalas having size as under by removing grass/vegetation/sarkanda etc including removing of earth, mud, stone aggregate/boulders, brick bats or rubbish etc. filled inside /alongside the drain(s) to the entire satisfaction of Engineer-in-Charge and removal the same outside MoD land complete: -

Drains/Nalas having any depth but bottom width more than 400 mm

Drains/Nalas having any depth but bottom width less than 400 mm

NOTE: For measurement, area shall be measured as inner girth of drain i.e bottom and two sides of drain.

SUBASH MAHAJAN

M/s Sahib and Company

ELECTRA ENGINEERS

J.K & Company

BHARAT ENTERPRISES

AAR KAY BEE ENTERPRISES

NEW GURBINDER INDUSTRIES

M/S GURBACHAN SINGH

LABH SINGH AND SONS

siddharthenterprises