SPL REPAIR RENO AT ELECTRO OPTICAL TRACKING STN AT SITE A B C AT ITR CHANDIPUR

Amount

Taking down cement plaster on wall, ceiling, roof etc incl raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Taking down existing roof treatment of any specification and thickness including padding complete thickness not more than 15 cm and removal of rubbish to a distance n.exc 500m complete all as specified and directed.

Taking down chowkats or frame not exceeding 1.5 Sqm with shutter (without taking of shutters from the frames) complete all as specified and directed.

All as per Item No 4 here in above but exc 1.5 Sqm & n exc 4.0 Sqm complete all as specified and directed.

Demolition Concrete in ground floors and pavings n exc 15 cm thick (below or above ground level) complete all as specified and directed.

M&L rendering 15mm thick cement plaster in CM 1:6 on other faces of brick work (internal surfaces) including finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick cement plaster in two coats, 1st coat 10mm thick and 2nd coat 5mm thick with WPC @ 0.2Ltr/50 KG bags of weight of cement on external surfaces of brick work in CM 1:4 including fair finishing (WPC will be measured and paid separately) complete all as specified and directed Note : Mix WPC as per manufacturer instructions.

M&L rendering 10mm thick cement plaster in CM 1:3 on ceiling surfaces complete all as specified and directed.

Supply only ISI marked on packing liquid WPC complete all as specified and directed.

M&L for 10 mm thick backing coat cement plaster in CM 1:4 as on fair face of brick work for receiving wall tiles complete all as specified and directed.

M&L for glazed ceramic colour tiles of any size 450mmx350mmx7mm/450mm x 300mm x 7mm thick in dados,skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match colour tiles complete all as specified and directed.

M&L for 15 mm thick Screed bed in cement mortar CM 1:4 complete all as specified (Floor& pavement tiles

M&L for non-skid ceramic colour tiles 7 to 8mm thick (square or rectangular) area of EACH tiles excceding 0.06 Sqm but not exceeding 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified

M&L 10 mm thick vitrified double charged coloured tiles not exceeding 0.36 sqm but not exc 1.0 sqm in floors etc set & jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed.

M&L PCC chequered white cement tiles of size 167x167 x (20-25mm) thick as in foothpath & hardstanding set in CM (1:6) including filling point with coloured cement to match the colour complete all as specified and directed

M & L 18 to 20 mm thick black/ saffron granite slab (of any type) in steps, pillars, platforms of basin in cement mortar (1:4) including pointing in white/coloured cement (1:2) using marble dust with admixtuer of pigment to match with shade of granite cutting ,polishing and rounding to edges over 15mm thicks bedding layer in cement mortar 1:4 complete all as specified

M&L for PCC 75 mm thick type C1 1:3:6 (20mm stone aggregate) as in plinth protection, paving finised even and smooth without using extra cement complete all as specified and directed.

M&L PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in padding concrete for getting proper slope of PCC padding 40 mm thick roof/covering under floor etc as specified and directed.

M&L rendering 10 mm thick cement screed in CM (1:4) with WPC (WPC applied as per manufactures instruction and measured and paid separately) including finishing the surfaces even and smooth complete all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 @0.30 KG /Sqm including cleaning surface complete all as specified and directed.

Supplying & laying water proofing membrane APP 3 mm thick and weight of 3.0 KGs/Sqm reinforceed with polyster non woven fabric(weight not less than 150gms/sqm) & laid on bituminious primer surface as application and directed.

S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing MES SSR-2010 Part-II complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame made out of mild steel tubes for top and bottom rails . Mild steel frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and gap insert for top rail and bottom rail ; Paneling of plain colour PVC sheet to be fitted in the mild steel frame welded /sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the frame at site as per specification clause No 8.B.1 to 8.B.10 and drawing in MES SSR-2010 Part-II complete all as specified and directed.

S&F 100mm long Aluminium alloy with Galvanised mild steel Hinges pin anodised and fixed complete all as specified and directed.

S&F125 mm size Aluminium handles cast type, anodised complete, all as specified .

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply and Fixing powder coated aluminium frame for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

Supply and Fixing powder coated aluminium door shutters, aluminium section weighing 0.55 KG/m including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 nos in EACH door, hinges, anodised aluminium snap beading screws etc. complete all as specified. Note : Glass/particle board shall be measured separately.

Supply and Fixing powder coated aluminium window and ventilator shutter side hung type without sash bars , aluminium section weighing 0.55 KG/m including necessary joining cleats, glazing clips, ruber packing, , anodised aluminium snap beading, screws , anodised aluminium fittings such as peg stays 150 mm long(1 no), hinges type B-21 100 mm long (2 nos) suitable handle ( 1 no) in EACH shutter complete all as specified. Note : Glass shall be measured separately.

Supply & Fixing 5.5 mm thick sheet glass exceeding 0.5 sqm in EACH pane fixed to aluminium frame complete all as specified and directed

-ditto all as per item No 31 above but not exceeding 0.50 Sqm in EACH pane

M&L for 12mm thick premalinated particle board interior grade ,prelaminated on both side with decorative choice complete all as specified and directed.

Supply and Fixing powder coated aluminium grill of DG-916, 10mm thick to alluminium window complete all as specified and directed.

M&L double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Dismantiling wall and ceiling boards (fibre, pulp, insulation etc) or insulation board/slabs/ blankets any thickness cover fillets all as pecified.

M&L for hanger 6mm dia GI (upto 1200mm length) adjustable level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fastener 12.5mm dia 40mm long complete all as specified and directed.

S&F aluminium anodised snap grid false ceiling frame of size 605 x 605 mm frame work for false ceiling complete all as specified and directed .

S&F 4mm thick E board 60x60cm in size fixed as per manufacturer instruction in false ceiling in frame grid of 605x605mm complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

Preparation of old steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint only (on factory made steel windows and ventilators) complete all as specified and directed

Preparation of old plastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed.

Preparation of new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L Preparation of newly plastered surfaces, applying single layer of wall care putty and applying two coats of oil emulsion distemper of approved tint, colour on wall including cornices, pilaster, over a coat of primer complete all as specified and as directed by Engineer-in-charge.

Complete removal of existing treatment of walls including cornices, pilasters etc and applying two coat of distemper oil emulsion, white or tinted over a single layer of wall care putty on wall over a coat of primer complete all as specified and as directed .

Complete removal of existing treatment of walls including scrapping down smoke soot, moulds, moss efflorescent salts and trading oil and greasy spots and applying two coats of weather coat paint over a coat of alkali resistant primer complete all as specified and directed .

M&L Preparation of newly plastered surfaces and applying two coats of weather coat paint of approved tint, colour on wall including cornices, pilaster, over a coat of alkali-resistant primer complete all as specified and directed .

M&L Vitreous china squatting pan of pattern Orissa Pattern size 580x 440 mm white with ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe fixed in repair including placing in position in floor and embedded in cushion of PCC 1:7:12 type E-1 and finishing the top surfaces to match with the existing flooring complete all as specified and directed.

S&F 15mm dia Fancy type bib taps screwed down and fixed in repairs complete all as specified and directed.

Dismantling or breaking up set in cement mortar drain pipes, AC 100MM dia, complete all as specified and directed.

S&F 100 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls taking down of exisiting pipe complete all as specified and directed.

All as per Item No 51 above but 75 mm dia pipe

S&F LDPE 40mm bore pipe of pressure rating 6KG/cm2 fixed complete to wall ceiling or in floorscomplete all as specified and directed.

Supply and fixing only PVC(SWR) bends of (any radius) suitable for 110 mm dia complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing complete all as specified and directed.

All as per item No 55 mentioned here in above but 20mm dia complete all as specified and directed.

S&F 15mm dia medium grade galvanised tube with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

All as per item No 57 mentioned here in above but 20 mm dia complete all as specified and directed.

Dismantaling of water tanks capacity exceeding liters 500 & not exceeding 1000 liters and removing to store complete all as specified and directed.

M&L for 1000 LITREs rotational moulded polythyelene water storage tanks hoisted and fixed in position complete all as specified and directed.

S&F 20mm dia gun metal globe or gate valve with iron wheel complete all as specified and directed.

S&F 20 mm dia ball valve, high pressure, of PTMT fitting with with epoxy coating complete all as specified and directed.

S&F 15mm dia fancy type pillar taps, cast copper alloy with capstain heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe fixed fixed in repairs complete all as specified and directed.

S&F 15mm dia fancy type stop valves, chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and directed.

S&F PTMT grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed.

S&F 125 mm size Brass chromium plated shower roses with or without swievel joints, any size including fixing to steel pipe or union fixed as in repairs complete all as specified and directed.

M&L for PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm dia PVC flush pipe of required length and making connections complete including taking down by dismantling the existing unserviceable cistern of any description complete all as specified and directed.

M&L for PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F Vitreous china wash hand basin with pedestal, coloured, flat back of size 550 x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, fixed in repairs, complete all as specified and directed.

Dismantaling of wrought iron or mild steel work or structural including steel work gates etc. complete all as specified and directed.

S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed .

Demolition of reinforced cement concrete other than ground floor, beam, chajjas and similar suspended work complete all as specified and directed

Form work to chajja, weather shades, cooking platform, shelves including fair finished surface of the concrete slab etc complete all as specified and directed..

M&L mild steel TMT bar 10mm dia and over cut to length bent to shape with MS wire (annealed) not less than 0.90 mm dia complete all as specified and directed.

All as per item No 75 mentioned here in above but 6 to 8 mm dia complete all as specified and directed.

Providing RCC 1:2:4 type B1 (using 20mm graded aggregates) as in chajjas and similar suspended work in any situation complete all as specified and directed.

M&L Providing rebarring at places as in beam, lintel, chajjas and similar to be fixed Dr.fixit Anchorefix/lok fix of (Fosroc) complete all as directed by Engineer-in-charge.

M&L all effected areas of beam, lintel and coloumns are to be drilled @ 1ft c/c horizontaly and nozel to be fitted in a staggered manner to covered the cracks, PVC nozel to be inserted upto half of the depth/thickness and injection grouting with Dr.Fixit Epoxy injection grouting compound to be done by pressure pump complete all as specified and directed.

M&L 'V' groove cutting upto 40mm thick at the crack line and filling the line with Dr.fixit micro concrete as per manufacture instruction complete all as specified and directed.

Providing 1/2 coat of a two component zinc-rich anticorrosive primer Dr. Fixit Epoxy Zinc Primer of M/s pidilite Industries Ltd and application to be carried out using a brush in 2 coats over the steel substrate at an interval of 4-6 hours. Storing, mixing & application to be done strictly in accordance with the manufactur's instruction including complete surface preparation of steel substrate prior to applying Dr. Fixit Epoxy Zinc complete all as specified and directed.

S&F Vitreous china semi pedestal (Anglo indian pattern) water closet with 10 Ltr flushing cistern, flush pipe and lid etc completed all as specified by Engr-in-Charge.

S&F Vitreous china Wash hand Basin 630x 450 mm size, including brackets and water pipe etc all as specified by Engr-in-Charge.

S&F 15mm concelaed fancy type stop valve, cast copper alloy chromium plated screwed down high, pressure with crunch handle confiring to IS-781 of 1984 screwed both ends suitable for 15mm bore pipe or for unions, in repair complete all as specified and directed.

S&F in repairs angle stop valve, chromium plated, concealed type suitable for 15mm bore pipe complete all as specified and directed.

S&F Brass chroimum plated towel rod 20mm dia alongwith brackets complete all as specified and directed.

M&L health faucet Abs with dounle lock 1.2 meter stainless stell flexible hose and wall hook (Cat ; BEA-40. make : Prayag or equivalent ) complete all as specified and directed.

S&F coloured toilet paper holder box of viterous china fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated brackets guard and 60cm long as specified, complete all as specified and directed.

S&F CP 2 way angle cock with flange chromium plated way angle cook with flange (Cat ; 8211. make : Prayag or equivalent ) complete all as specified and directed.

S&F vitreous China white urinal, full stall type, inclding providing fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with 60mm long brass screws, pointing around urinal and fixing complete all as specified and directed.

S&F metropole flush valve dual flow concealed type with cover plate 32mm size (Cat ; FLV 1085. make : Jaquar/CERA/ Blue Star or equivalent ) complete all as specified and directed.

S&F 12 mm thick granite urinal partition complete all as specified and directed.

S &F 1500 x 600 mm Mirror , fancy type, designed, & hanging on back side (Cat ; BLM04. make : Prayag or equivalent ) complete all as specified and directed.

Taking down carefully concealed aluminum/copper point wiring (Light fan socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators socket, light fittings etc removing materials for taking credit and making good disturbed surfaces of wall, floor, etc complete all as specified and directed.

M&L Point wiring using FRLSH grade PVC insulated, unsheathed, stranded copper conductor of size 1.5 Sqmm and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed stranded copper conductor as earth continuity wire to be drawn in and including non metallic rigid PVC conduit concealed in wall including MS sheet metal switch / terminal box 1.2 mm thick upto (200x300)mm size box and beyond that not less than 1.63mm thick with Hylam sheet cover 3.00mm thick including cutting and chassing the wall as per site requirement and making good disturbed surface of walls complete all as specified for :- One light point controlled by one switch

Ditto as per item No 96 here-in-before but One 5 Amps switch socket combination on independent board complete all as specified and directed.

Ditto as per item No 96 here-in-before but One 5 Amp Socket on same board complete all as specified and directed.

All as per item No. 96 above but for 15/16 Amps switch socket out let point by using 4.0 Sqmm FRLSH grade, PVC insulated, stranded copper, conductor and 4.0 Sqmm FRLSH grade PVC insulated, stranded copper conductor as earth continuity conductor complete all as specified and directed.

Supply and Fixing including connecting of switch piano, flush button type single pole one way 5 Amps complete all as specified and directed.

Supply and Fixing including connecting of switch socket combination 5 Amps 2 in 1 flush type complete all as specified and directed.

Supply and Fixing including connecting of switch socket combination 2 in 1, 3 pin, 5 and 16 Amps flush type complete all as specified and directed.

Supply and Fixing Electronic fan regulator, stepped type 120/280 V on existing phenolic laminated sheet complete all as specified and directed

M&L Point wiring using FRLSH grade PVC insulated, unsheathed, stranded copper conductor of size 1.5 Sqmm and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed stranded copper conductor as earth continuity wire to be drawn in and including non metallic rigid PVC conduit concealed in wall including cutting and chassing the wall as per site requirement and making good disturbed surface of walls complete all as specified for :- (Note : The point wiring shall be connected without hylem sheet and sunken box ) one light/fan point controlled by one switch

Ditto as per item No 102 here-in-before but one 5 Amps switch socket combination on independent board complete all as specified and directed.

Ditto as per item No 102 here-in-before but one 5 Amps switch socket combination on same board complete all as specified and directed.

All as per item No 102 here-in-before but for 15/16 Amp switch socket outlet point by nusing 2.5 Sqmm FRLSH grade PVC insulated stranded copper conductor and same as earth continuty conductor.

Supply and Fixing Modular switch one way 6 Amp, 1 module complete all as specified and directed.

Supply and Fixing Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

Supply and Fixing Modular switch one way 16 Amp, 1 module complete all as specified and directed.

Supply and Fixing Socket, 16A - 2/3 pin combined 2 module complete all as specified and directed.

Supply and Fixing modular fan regulator, stepped type 120/280V complete all as specified and directed.

Supply and Fixing white cover plate with single module complete all as specified and directed.

Supply and Fixing white cover plate with double module complete all as specified and directed.

Supply and Fixingwhite cover plate with three module complete all as specified and directed.

Supply and Fixing white cover plate with four module complete all as specified and directed.

Supply and Fixing white cover plate with six module complete all as specified and directed.

Supply and Fixingmodular white cover plate with frame eight module complete all as specified and directed.

Supply and Fixing modular metal flush box 1/2 module complete all as specified and directed.

Supply and Fixing modular metal flush box 3 module complete all as specified and directed.

Supply and Fixing modular metal flush box 4 module complete all as specified and directed.

Supply and Fixing modular metal flush box 6/8 module complete all as specified and directed.

Supply and Fixing ceiling rose, polycarbonate three terminals. complete all as specified and directed.

Taking down Sub main /Sub circuit wiring of any type and size including conduit / casing capping / batten wiring complete all as directed by Engineer-in-Charge.

M&L Submain wiring using two runs of FRLSH grade PVC insulated unsheathed, stranded, copper conductor cable of size 4 Sqmm and one run of 4 Sqmm FRLSH grade PVC insulated, unsheathed, stranded copper wire concealed in wall and to be drawn in and including PVC conduit of high grade of 20mm dia including cutting and chassing wall surface as per site requirement all as specified and directed (Note: Three runs of 4 Sqmm copper wire shall be measured as one unit.)

All as per item No. 125 above, but using 4 runs of 6 Sqmm and two run of 6 Sqmm FRLSH grade PVC insulated, unsheathed, stranded, copper wire to be drawn in PVC conduit of high grade of size 25mm dia complete all as specified and directed. (Note : Six runs of 6 Sqmm copper wire shall be measured as one unit.)

All as per item No.125 here in before but using 2 runs of 2.5 Sqmm and one run of 2.5 Sqmm PVC insulated, unsheathed, stranded, copper wire to be drawn in and including PVC conduit of high grade of size 20mm dia complete all as specified and directed.

Supply and fix loadline TPN MCBDB 6 way with 200 Amps rated busbar, double door type including provision for fixing MCCB 4 pole 100 Amps, 25 KA complete including taking down old DB and making disturbed surafce good to match the existing surface Make : L & T Cat part No. DBVTL00654 or equivalent in Legrand/ Schnieder/Siemens) complete all as specified and directed.

S & F in repair MCB DB with transparent window IP-43 1 x 4 Module with din rail with bus bar, neutral link, earth bar and din rail, double door type, TPN 4 way 240 volts, fixed in wall including making good disturbed surfaces including taking down old unserviceable , complete all as directed by Engineer-in-Charge. Make : L & T Part No. DBVTL004GD, Legrand/ Schnieder/Siemens or equivalent

S & F MCB DB made of sheet steel phosphatised powder coated with bus bar, neutral link, earth bar and din rail, double door type, TPN 4 way 440V, flush in wall including making good disturbed surfaces including taking down old unserviceable , equivalent in Legrand/ Schnieder/Siemens) complete all as directed by Engineer-in-Charge.

All as per Item No. 130 here in-before but SPN 8 way double door type, 240 volt

All as per in Item No. 130 here-in-before but of SPN 4 way,240Volts double door

Supply and Fixing MCCB 4 pole, with fixed thermal & magnetic release of breaking capacity 36 kA, 415 Volts, 63 to 100 Amps including taking down old unserviceable. Make- L & T, Cat No CM97919OOK2OG, Legrand/ Schnieder/Siemens or equivalent complete all as specified and directed.

Supply and Fixing MCB, SPN. 6-32 Amps rating 240, volt, 'C' series, 10 kA, including taking out old complete all as specified and directed.

Supply and Fixing MCB, TP, 440V, 50Hz, 10kA, 'C' series, 6 to32 Amps including taking out old complete all as specified and directed.

Supply and Fixing MCB, TPN, 440V, 50Hz, 10kA, 'C' series, 6 to32 Amps including taking out old complete all as specified and directed.

Supply and Fixing MCB, SP, 6 to 32 Amps, 240 volt, 'B' Series, 10 kA, including takind out old complete all as specified and directed.

Supply and fix LED tube light fitting 20 Watt, MS White Powder coated decorative LED T-8 Batten with PC tubeand MS Batten with decorative end cap complete with retrofit T 8 Polycarbonate including connecting with suitable size of wire from ceiling rose to light connector all as specified and directed. Make - C & S, Cat Part No TARA-M/20W, CG/Jaquar or equivalent

Supply and fix LED tube light fitting 2 x 20 Watt, white powder coated CRCA box type LED industrial Batten with PC tube retrofit T-8 with decorative end cap complete with retrofit T 8 Polycarbonate including connecting with suitable size of wire from ceiling rose to light connector all as specified and directed. Make - C & S, Cat Part No 2 x 20W CRUX/2x 20 W, CG/Jaquar or equivalent

Supply and fix LED tube light fitting 2' x 2', 36 Watt, white powder coated CRCA full glow recess mounted LED Backlit Panel including connecting with suitable size of wire from ceiling rose to light connector all as specified and directed. Make - C & S, Cat Part No CYGNUS-C/36W/2x2, CG/Jaquar or equivalent)

S&F LED street light fitting 60 Watt with all accessories, IP 66 attractively styled high pressure die cast housing having heat toughned glass cover housing epoxy powder coated in dark graphite grey colour complete with all accessories including connecting with 3 core wire 1.5 sqmm from junction box to fitting complete all as specified and directed. Make - C & S, Cat Part No INDUS-E/60W, CG/Jaquar )

S&F LED LED Flood light fitting 120 Watt with all accessories, IP 66 attractively styled high pressure die cast aluminium housing having heat toughned glass cover housing epoxy powder coated in dark graphite grey colour complete with all accessories including connecting with 3 core wire 1.5 sqmm from junction box to fitting complete all as specified and directed. Make - C & S, Cat Part No ORION-3.0/120W, CG/Jaquar )

S & F in repair Sheet metal enclosure single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP of 20 Amps as in repairs complete all as specified and directed.

Supply and fix exhaust fan, heavy duty 300mm sweep with louvers, 1400 RPM and connecting up including provision of copper and flexible 3 core of size 0.5 sqmm and PVC connector block complete all as specified. Make- Havells/CG/Khaitan , Model-Turbo Force SP or equivalent

Supply and fix ceiling fan 1400 mm sweep complete with electronic type fan regulator and accessories 230 volt energy efficient. Make- Havells, Model- SS-390 Metallic) complete all as specified and directed.

Taking down old ceiling/exhaust fan and depositing to E/M store yard complete all as specified and directed.

Supply and fix in repair SMDB 4 way suitable for housing 100 Amps MCCB 4 pole as incomer and MCCB 32 Amps as outgoing with metering devices and control wiring and busbar made of CRCA sheet duly powder coated including taking out old DB Make : L & T Cat part No. DA20D1044CZZ0 complete all as specified and directed.

S & F surge protection device Type 2 SPDs , 15 KA 3 P + N, 2 mod complete all as specified and directed.

S & F Modular Energy meter 3 phase, 4 wire, 240 Volt, 10 - 60 Amp (Make : L & T Cat part No. WD4000103OOO or equivalent in Schnieder/Siemens) complete all as specified and directed.

S & F in repair Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB,20 Amps complete all as specified and directed.

S & F MCCB 3 pole, with fixed thermal & magnetic release of breaking capacity 25 kA, 415 Volts, 100 Amps including taking down old unserviceable. (Make - L & T, Cat Part No CM97919OOK2OG) complete all as specified and directed.

S & F MCCB 4 pole, with fixed thermal & magnetic release of breaking capacity 25 kA, 415 Volts, 32 Amps including taking down old unserviceable (Make - L & T, Cat Part No CM97919OOK2OG or equivalent) complete all as specified and directed.

M&L Earthing with galvanized steel earth plate electrode of size 600 mm x 600 mm x 6 mm buried directly in ground connected to GI wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron including 15mm dia light grade GI tubing for protection of earth lead, MS sheet metal funnel with wire mesh, watering pipe light grade 20mm dia, charcoal or coke and common salt in alternative layers of 15 cm compacted thickness all around the electrode with concrete earth pit with PCC type C1 , 1:3:6 (using 20 mm graded stone aggregate), 50mm thick precast RCC type B1, (1:2:4)(using 20 mm graded stone aggregate) pit cover reinforced with 8mm dia deformed bar and suitable handle made of 10mm dia round bar and necessary excavation, earth work, in soft/loose soil and disposal of spoils to a distance not exc 50 mtr and necessary connection and testing complete all as shown in electrical plate No.3 of SSR Part-I, 2009 and complete all as specified and directed.

All as per item No 153 here-in-before but copper earthing using 600x 600 x 3.15 mm thick copper plate and buried directly in ground connected to copper strip of size 20 x 3 mm complete all as specified and directed.

S & F in repair copper Earthing conductor of size (20 x 3) mm complete all as directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5 m wide and n.exc 1.5 m in depth and getting out soft/ loose soil for cable trenches, foundations etc complete all as specified and as directed .

Returning, filling in, excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n. exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for sand cushioning to under ground cable provided with layers of sand ( 8 cm deep before laying cable and 15 cm after laying cable) complete all as specified and directed. Note:- Punned thickness only will be considered for payment complete all as specified and directed.

Supply and lay burnt best quality locally available old size sub class 'B' bricks laid in trenches perpendicular to U/G cable for cable protection complete all as specified and directed.

M & L for taking out old unserviceable LT UG cable of any size from trenches/duct/ wall or floor etc complete all as specified and directed.

Supplying, laying and testing XLPE insulated, extruded PVC outer sheath and inner sheath, galvanized steel strip armoured cable of size16 Sqmm 2 core with stranded aluminum conductor suitable for rated voltage of 1100 Volt grade and laid in trenches/passing through pipe/ducts or on pole complete all as specified and directed. Make;- Havells/ ICL/GLOSTER

Ditto as per item No 162 here-in-above but sectional area of 70 Sqmm 3.5 Core

Ditto as per item No 162 here-in-above but sectional area of 120 Sqmm 3.5 Core

Taking out LT feeder pillar box of any size and any type with all switch gears and complete accessories and disconnecting all incoming and outgoing cables complete all as specified and directed

Supply,installing, testing and commissioning indoor type LT feeder piller box of suitable size , padestal mounted, CPRI approved factory made totally enclosed, dust and vermin proof, double, Front and rear openable type IP 54 protection made of 2mm thick CRCA sheet having proper locking arrangement in both front and rear door suitable for 440 volts, 50 Hz, 3 phase 4 wire system and comprising with and including following accessories and mounted on PCC Plat form made out of PCC 1:3:6, complete with the following items housed in .(Panel - Site 'B') BUSBAR :- 400 Amps rated copper bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/DMC insulator bus bar support (Square/round ) nsulators of suitable size and good insulation resistance. INCOMING:- (i) 4 POLE MCCB of capacity 250 Amps, breaking capacity 36 KA with microprocessor release, adjustable overload 40-100%, neutral protection 50-100%, 415 Volts 50 C/S 3 phase -01 No. (ii) Digital multifunctional meter - 01 No. (iii) Modular indicator lamp with integral circuit (230/240 volt) and cluster LED (RED, ORANGE BLUE) -01 set (ivi) CT (250/5A) -03 Nos OUTGOING:- (a) MCCB 4 pole of capacity 125 Amp breaking capacity 36KA with thermal release, 415 volts 50 C/S, 02 Nos (b) MCCB 4 pole of capacity 100 Amp breaking capacity 25 KA with thermal release, 415 volts 50 C/S, 01 Nos (c) MCCB 4 pole of capacity 32 Amp breaking capacity 16 KA with thermal release, 230 volts 50 C/S, 01 Nos (d) MCB 2 pole of capacity 32 Amp breaking capacity 10 KA with thermal release, 230 volts 50 C/S, 01 Nos (e)Danger notice plate of 1.6 mm thick mild steel sheet, vitreous enamelled white, with letters, figure and conventional skull and bones in signal red colour and fixed with MS clamp, bolts and nuts of approved size, for LT, 20x15 cm size. NOTE:- (i) All control wiring shall be done with single core PVC insulated unsheathed copper conductor 1100 volt grade of size 1.5 sqmm and terminated with heavy duty tinned copper lugs. (ii) All out going cables shall be terminated in bakelite cable connector and shall be duly glanded and socketed and all the incoming/outgoing cables shall be entered/exit from the bottom of panel. (iii) All internal connections for power lines shall be done with single core PVC insulated (HRFRLS) unsheathed copper wire or strip 1100 volt grade of suitable size and terminated with heavy duty tinned copper lugs . (iv) White acrylic marker plate (for feeder/switch marking) to be provided with black lettering by heat press machine as indicated in drawing and to be pasted over the panel door/near the cable connector with high quality adhesive .

All as per in item No. 166 here-in-before but comprising of the following (Site 'B') :- BUSBAR :- 200 Amps rated copper bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/DMC insulator bus bar support (Square/round ) insulators of suitable size and good insulation resistance. INCOMING:- (i) 4 POLE MCCB of capacity 125 Amps, breaking capacity 36 KA with microprocessor release, adjustable overload 40-100%, neutral protection 50-100%, 415 Volts 50 C/S 3 phase -01 No. (ii) Digital multifunctional meter - 01 No. (iii) Modular indicator lamp with integral circuit (230/240 volt) and cluster LED (RED, ORANGE BLUE) -01 set (ivi) CT (125/5A) -03 Nos OUTGOING : (a) MCCB 4 pole of capacity 100 Amp breaking capacity 25 KA with thermal release, 415 volts 50 C/S, 01 No (b) MCCB 4 pole of capacity 32 Amp breaking capacity 16 KA with thermal release, 415 volts 50 C/S, 02 Nos (c) MCB 2 pole of capacity 32 Amp breaking capacity 10 KA with thermal release, 230 volts 50 C/S, 01 No

All as per item No. 166 here-in-before but comprising of the following (Site A) :- BUSBAR :- 400 Amps rated copper bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/DMC insulator bus bar support (Square/round ) nsulators of suitable size and good insulation resistance. INCOMING:- (i) 4 POLE MCCB of capacity 250 Amps, breaking capacity 36 KA with microprocessor release, adjustable overload 40-100%, neutral protection 50-100%, 415 Volts 50 C/S 3 phase -01 No. (ii) Digital multifunctional meter - 01 No. (iii) Modular indicator lamp with integral circuit (230/240 volt) and cluster LED (RED, ORANGE BLUE) -01 set (ivi) CT (250/5A) -03 Nos OUTGOING : (a) MCCB 4 pole of capacity 100 Amp breaking capacity 25 KA with thermal release, 415 volts 50 C/S, 03 Nos (b) MCCB 4 pole of capacity 32 Amp breaking capacity 16 KA with thermal release, 415 volts 50 C/S, 03 Nos

All as per item No. 166 here-in-before but comprising of the following (Site A) :- BUSBAR :- 200 Amps rated copper bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/DMC insulator bus bar support (Square/round ) nsulators of suitable size and good insulation resistance. INCOMING:- (i) 4 POLE MCCB of capacity 100 Amps, breaking capacity 36 KA with microprocessor release, adjustable overload 40-100%, neutral protection 50-100%, 415 Volts 50 C/S 3 phase -01 No. (ii) Digital multifunctional meter - 01 No. (iii) Modular indicator lamp with integral circuit (230/240 volt) and cluster LED (RED, ORANGE BLUE) -01 set (iv) CT (100/5A) -03 Nos OUTGOING : (a) MCCB 4 pole of capacity 100 Amp breaking capacity 25 KA with thermal release, 415 volts 50 C/S, 01 Nos (b) MCCB 4 pole of capacity 32 Amp breaking capacity 16 KA with thermal release, 415 volts 50 C/S, 03 Nos

All as per item No. 165 here-in-before but comprising of the following (Site C)) :- BUSBAR :- 200 Amps rated copper bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/DMC insulator bus bar support (Square/round ) nsulators of suitable size and good insulation resistance. INCOMING:- (i) 4 POLE MCCB of capacity 100 Amps, breaking capacity 36 KA with microprocessor release, adjustable overload 40-100%, neutral protection 50-100%, 415 Volts 50 C/S 3 phase -01 No. (ii) Digital multifunctional meter - 01 No. (iii) Modular indicator lamp with integral circuit (230/240 volt) and cluster LED (RED, ORANGE BLUE) -01 set (ivi) CT (100/5A) -03 Nos OUTGOING : (a) MCCB 4 pole of capacity 63 Amp breaking capacity 16 KA with thermal release, 415 volts 50 C/S, 02 Nos (b) MCCB 4 pole of capacity 25 Amp breaking capacity 16 KA with thermal release, 415 volts 50 C/S, 03 Nos

All as per item No. 166 here-in-before but comprising of the following (Site C)) :- BUSBAR :- 400 Amps rated copper bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/DMC insulator bus bar support (Square/round ) nsulators of suitable size and good insulation resistance. INCOMING:- (i) 4 POLE MCCB of capacity 250 Amps, breaking capacity 36 KA with microprocessor release, adjustable overload 40-100%, neutral protection 50-100%, 415 Volts 50 C/S 3 phase -01 No. (ii) Digital multifunctional meter - 01 No. (iii) Modular indicator lamp with integral circuit (230/240 volt) and cluster LED (RED, ORANGE BLUE) -01 set (iv) CT (250/5A) -03 Nos OUTGOING : (a) MCCB 4 pole of capacity 100 Amp breaking capacity 25 KA with thermal release, 415 volts 50 C/S, 03 Nos OUTGOING : (a) MCCB 4 pole of capacity 100 Amp breaking capacity 25 KA with thermal release, 415 volts 50 C/S, 03 Nos (b) MCCB 4 pole of capacity 32 Amp breaking capacity 16 KA with thermal release, 415 volts 50 C/S, 03 Nos

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.3 mm thick burried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L.) and connected to galvanized iron earth strip 32 x 6 mm by means of bolts, nuts, check nuts, and washer of galvanized iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 8 mm dia round bar, including necessary excavation and earth work in any type of soil, 20 mm dia med grade galvanized steel tube for watering with one end fixed with cast iron funnel and wire mesh, 40 mm bore light grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in electrical Plate No 3 of SI Part 1 and testing on completion complete all as specified and directed.

S & F earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 32 x 6 mm GI strip complete all as specified and directed..

M & L for drilling suitable dia horizontal bore holes for insertion/laying of 80/ 50mm and 40mm bore GI tubing of any description below/under road surface/floors not more than 6 mtr wide etc with using mechanical or manual devices as required at site including making good disturbed surface to match with the existing strata after laying pipes complete all as specified and directed

S&F light grade galvanized iron pipe 50 mm bore confirming to IS : 1239 and ISI marked with all fittings and fixed on walls/poles/crossing of road etc for protection of cable complete all as specified.

Ditto item No 175 here-in-above but 40 mm bore

Taking out old Aluminium strip from wall/roof top and keeping in safe custody for reuse and taking credit complete all as specified and directed.

M & L for dismantling PCC and taking out Air termination rod with GI pipe complete all as specified and directed

Fixing only aluminium strip 25 x 3.15 mm obtained from item Sl No 176 including saddle and fixing screw and porcelein insulator for roof conductors and down conductors above ground complete all as specified and directed.

Fixing only single pointed air termination rod of 12 mm dia and 300mm long obtained from item sl No 178 complete all as specified and directed.

Supply and fixing Air Termination single pointed Aluminium rod 12mm dia and 300mm long complete all as specified and directed.

Supply and fixing of Aluminium strip 25x3.15mm with saddles and fixing screws etc for roof conductor and down conductors above ground complete all as specified and directed.

S & F of Test Point terminal block made of Gun Metal or Phosphorus Bronze size 75x75x25 mm drilled and screwed including 3 Nos 8mm dia, 25mm long Hex head screw complete all as specified and directed.

M & L of cement concrete for foundation of Air Termination of type B2, 1:2:4 with 20mm grade stone aggregate complete all as specified and directed.

Supply and fixing light grade GI tubing 25mm bore in wall/roof including all fittings and fixtures complete for supporting Air-Termination complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.3 mm thick burried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L.) and connected to galvanized iron earth strip 32 x 6 mm by means of bolts, nuts, check nuts, and washer of galvanized iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 8 mm dia round bar, including necessary excavation and earth work in any type of soil, 20 mm dia med grade galvanized steel tube for watering with one end fixed with cast iron funnel and wire mesh, 40 mm bore light grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in electrical plate No 3 of SI Part 1 and testing on completion, complete all as specified and directed.

Demolition concrete in ground floors and paving not exceeding 15cm thick (below or above ground level)

M&L cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate), 100 mm thick as in sub base.

M&L sand filling under floor or in foundation including watering and consolidation.

M&L for Polythine film 400 micron thick laid on a sand layer. Note : Sand layer will be measured separately.

M&L for 150mm thick cement contrete work in pavement/hardstanding of flexural strength 40 KG/Sqcm in field using 400 KG of cement per CUM complete all as specified and directed.

M&L for finishing surfaces by brooming.

M & L forming contraction Dummy joints 65 mm deep and 10 mm wide with filling sealing compound grade A as in 100mm thick concrete slab.

M&L for construction joints 30mm deep 10mm wide with sealing compound.

M&L for forming 12mm thick expension joint & filled with perforated bituminous filller and top 30mm primed and sealed compound Grade Á' 150 mm thick concrete slab. Note : Expansion joint filled with seailing compound.

NARSINGH ENGINEERING COMPANY

R.B.Construction

ANIL KUMAR BISWAL

FRIENDS CONSTRUCTION