COMPREHENSIVE MAINT / REPAIR WORK IN OTM and MD ACCN AT JAK LI UNDER GE 970 EWS

Amount

Demolition of cement concrete (unreinforced) in ground floor and pavings n.exc 15cm thickness (below or above ground level) complete, all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as specified.

Screed bed or bedding layer of mortar 1:6, 15mm thick in cement mortar for laying for rough finish to receive in top layer, complete all as specified and directed.

M&L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L 10 mm rendering/ backing coat on fair faces of brick work or concrete surface in cement mortar 1:4 to receive tiles complete all as specified and as directed.

M & L Digital series of fully glazed GVT finish Ceramic wall tiles of size (600x1200x10mm thick) set and jointed in neat cement slurry and pointed in while or colour cement to match the tiles complete all as specified and directed.

M & L Glazed ceramic coloured tiles in vertical surface 350 x250x7 mm 450 x350 x7mm thick set and jointed in neat cement slurry and pointed in while or colour cement to match the tiles complete all as specified and directed.

M & L vitrified coloured light shade tiles 9 to 10mm thick ( square/rectangular) polished area of each tiles not exc 0.36 Sqm in floors set and jointed in neat cement slurry laid over and incl 15 mm thick screed bed of CM 1:6, pointed in white or colourer cement to match the tiles all as spd and directed.

Description all as above item No 9 but in vertical surface fixed over and incl 10 mm thick rendering/ backing of CM 1:4, complete as specified.

Demolition Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc.complete all as specified and directed .

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms/WHB drain tub and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and incl 20 mm thick screed bed of CM 1:3,rubbing and polishing complete all as specified and directed by Engr-in-charge

M&L for Kota stone slab 12-15mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed incl 10 mm thick rendering/ backing of CM 1:3, complete as specified.

M&L for 50mm thick PCC 1:3:6, type C-1, using 20 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade "A", complete all as specified and directed.

Hard Core of guage not exceeding 63mm deposited, spread levelled in layers not exceeding 15 cm thick using brocken stone or boulders of trap stone, watered and rammed to a true surface all as specified .

M&L 100 mm thick cement concrete in alternate bays type B-1 1:2:4 (using 20 mm graded stone aggragate) in floor and finishing cement concrete surface even and smooth without using extra cement.

M&L for sand filling 25 mm thick for sand cushioning for laying of interlocking paver blocks under floors/path including watering and consolidation as required complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggte) as in floors finished even and smooth without using extra cement, complete all as specified and directed .

M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

PCC 1:2:4, type B-1(using 20 mm graded crushed stone aggregates) as in coping work complete all as specified and directed..

M&L for Preparing surface of sunken slab and applying 15mm thick cement plaster 1:3 cement sand mortar with integral water proofing compound both on floor & wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating Polymer modified cementation coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturers instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder concrete upto top level to receive top flooring, complete all as specified and directed.

M&L for PCC 1:2:4, type B-0 using 12.50 mm graded crushed stone aggregates as in sunken floor complete all as specified and directed .

Demolition of cement concrete in reinforced (reinforced cut as required to faciliitate demolition) roofs, floors beams ,stair cases, landings, chajjaas and similar suspended work complete all as specified and directed .

M&L For RCC 1:1½:3 using (20 mm graded agg) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed .

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed .

S&F MS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed .

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats, etc. FE 410-W (Gde- E-250) quality A, complete all as specified and directed by Engr-in-charge

M&L For framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed .

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed .

S&F 8mm thick Non asbestos fibre cement building boards fixed or laid /inserted to existing timber/GI /Aluminium frame/flat iron frame work with screws all as directed .

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings. complete all as specified and directed .

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws, complete all as specified and directed .

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge/roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F 0.63 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed.

S&F 20 mm thick softwood eaves board with nails in any situation (except flooring and skirting) planed one side with butt joints complete all as specified and directed.

Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles, complete all as specified and directed by Engr-in-charge

M&L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed .

Description all as per item No 39 above but except bricks, complete all as specified and directed .

M & L brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM (1.4) complete all as specified.

Taking down cement plaster any description on brick or stone masonry walls incl racking out joint , Hacking for key ,scrubbing down with water completer all as specified

M & L Rendering (10+5) mm thick on fair faces of brick work or concrete surfaces ion cement mortar 1:4 finishing the surface even and smooth ( without using extra cement) in two layers with WPC complete all as specified.(WPC paid separately )

M & L Rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in cement morar 1:6 finishing the surface even and smooth (without using extra cement), complete all as specified and as directed.

M&L for Rendering 5mm thick in cement plaster 1:3 on ceiling surface finished even and smooth without using extra cement, complete all as specified and directed.

Supply only integral water proofing compound compete all as specified.

M&L for preparation of new plaster surface of wall and applying 3mm thick of wall putty, complete all as specified and directed.

M&L for preparation to new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed .

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed ..

M&L for preparation of new plastered surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal esistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed .

M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed.

M&L Preparation of old plastered or painted surfaces of wall after complete removing of existing treatment (scrubbing, washing down etc) and applying one coat of wall putty of minimum 3 mm thick, complete all as specified and directed.

BLANK

M&L for preparation to old plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed .

M&L for applying two coat of exterior emulsion over a coat of chalk whiteing Finishing walls with Acrylic Smooth exterior paint of required shade : (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over old prepared surfaces, complete all as specified and directed.

M&L for applying two coats of oil bound distemper over on ceiling over a coat of primer, on old prepared surfaces, complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutters from the frame ) area n exc 1.5 Sqm each all as specified and directed.

S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, in opening as per specification and drawing, complete all as specified and directed by Engr-in-charge.

S&F Factory made solid panel PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on front face and 2 mm thick plain color PVC sheet on back face supply and fixing in frame at site as per specification and drawing, complete all as specified and directed .

M&L for Preparing old wood and wood based materials of any description and girth, not otherwise described and treated with one coats of synthetic enamel paint etc, complete all as specified and directed .

M&L for Preparation of old steel painted surfaces and applying one coats of synthetic enamel paint complete all as specified and directed .

S&F Butt hinges medium weight cold rolled stainless steel 75 mm size, complete all as specified and directed .

S&F extruded aluminium alloy D type handles, anodised of 75mm size ISI marked complete all as specified and directed. (Make: Clasic or equivalent)

S&F 150mm long aluminum anodised barrel tower bolts of extruded section ISI Marked, complete all as specified and directed

S&F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square but exc 0.5 sq.m in each pane, fixing in repair, complete all as specified and directed .

S&F 0.36 mm dia nominal dia of stainless steel wire cloth avg width of aperature 1.40 mm and fixed with SS wire staple etc, fixing in repair, complete all as specified and directed .

S&F in repair 25 mm dia Stainless Steel curtain rods including fancy type bracket/ knob fixing arrangements, complete all as specified and directed .

Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed .

S&F 20 mm outer dia pipe of bore 3-layer PP-R (Polypropylne Random Copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylne Random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and directed .

Taking up or down 25 mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed .

S&F 25 mm outer dia pipe of bore 3-layer PP-R (Polypropylne Random Copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylne Random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and directed .

Dismantling existing water tank n exc 1000 ltr and removing from site including necessary connected accessories, complete all as specified and directed .

S&F Rotational moulded PVC water tanks (three layer) of 1000 Ltrs capacity, cylinderical vertical with closed top hoisted and fixed in position including all necessary fittings, complete all as specified and directed.

Dismantling existing water tank n exc 500 ltr and removing from site including necessary connected accessories, complete all as specified and directed .

S&F Rotational moulded PVC water tanks (three layer) of 500 Ltrs capacity, cylinderical vertical with closed top hoisted and fixed in position including all necessary fittings,, complete all as specified and directed .

S&F 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed of 20 mm dia (min weight- 455 gms) complete all as specified and directed.

S&F in repair vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rest including trap, PVC flushing pipe and anti-syphonage pipe including PVC valveless, syphonic action, flushing cistern 10 ltr capacity, low level, white, with inlet ball valve, float and handle including brackets, complete all as specified and directed.

S&F UPVC traps 'P' or 'S' of 110mm dia.

S&F in repair One piece S trap/P trap western commode (EWC) viterious china including fixing bolts ,mount viterious china type flushing cistern and fixed pipe , complete all as specified and directed.

S&F in repair vitreous china water closet Pedestal pattern pan and trap, including connections to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc. including PVC valveless syphonic action type flushing cistern trap, incl 10 Ltr capacity PVC flushing cistern & flush pipe and anti-syphonage pipe, jet sprey or health faucet with 15 mm dia, 1 mtr long flaxible tube fixed, complete all as specified and directed by Engr-in-charge

S&F in repairs vitreous china wash basin, white, flat back, size 600 x 480 mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, 32 mm bore waste coupling complete all as specified and directed.

S&F in repairs vitreous china wash basin, white, flat back,oval type counter top wash basin table mount of size 560x410 mm excluding taps, waste, chain & plug and porcelain stopper but, incl 32 mm bore waste coupling complete all as specified and directed.

S&F in repair brass CP health faucet with 1meter flexible tube and hook 15mm bore complete all as specified and directed

S&F in repair PTMT jet spray with 1 m tube for EWC complete all as specified.

S&F fancy type toilet paper holder chromium plated make fixed to wall with CP brass screws complete all as specifed.

S&F in repair Vitreous China urinals, bowl type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe).

S&F in repair Vitreous China automatic touchless toilet sensor type urinals, complete including providing and fixing with adjustment facility with sensor range adjustment to Pot complete all as specified and directe

S&F in repair for fancy type Soap dish, CP approximate size 160 x 160 x 90mm, complete all as specified and directed.

S&F in repairs 15 mm dia CP sower rose, with or without swivel joints any size incl fixing to steel pipes or unions etc, complete all as specified and directed .

S&F in repairs 25 mm PP-R Gate valves (brass insert) as per requirement of the site, complete all as specified and directed.

S&F in repair chromium plated fancy type mixer for mixing hot & cold water for WHB 15 mm dia screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair chromium plated fancy type wall mixer for mixing hot & cold water screwed down for 15 mm dia iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore bib tap long body cast copper alloy CP fancy type with capstan head handle, screwed down, screwed for brass, (weight not less than 450 gms), ferrule and fixed, complete all as specified and directed .

S&F in repairs 15mm bore stop/angle cock, cast copper alloy CP, fency type high presure with capstan head handle, (weight not less than 450 gms) screwed both ends for iron pipe of for unions complete all as specified and directed.

S&F in repairs 15mm bore stop/angle cock, cast copper alloy CP, fency type high presure with capstan head handle,(weight not less than 450 gms) screwed both ends for iron pipe of for unions , but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and directed by Engr-in-charge.

S&F in repair CP grating doom 125 mm dia with waste hole.(Min.weight 40gms), complete all as specified and directed .

S&F in repairs for Grating doom 100 mm dia of CP (Minimum weight 25 gms), complete all as specified and directed .

S&F in repair Low density PVC connection commercial quality 600mm long including PTMT nuts at both sides of 15mm bore and fixed, complete all as specified and directed.

Taking up or down 100mm bore of CI/PVC pipes (incl all fittings), with spigot and socket ends and lead joints incl burning out joints and removing lead of 100/75mm dia pipe, complete all as specified and directed .

S&F 110mm UPVC, SWR pipes, single socketed in any length with rubber ring joint leaid in trenches or in floor, complete all as specified and directed.

Description all as per item no.101 above but 75mm bore pipe, complete all as specified and directed .

S&F 110mm UPVC, SWR pipes, single socketed in any length with rubber rign joint fixed with wall, complete all as specified and directed.

Description all as per item No 103 above but 75mm bore pipe, complete all as specified and directed by Engr-in-charge.

S&F UPVC bends (any radius) of 110mm dia.

S&FUPVC bends (any radius) of 75mm dia.

S&F 110 mm dia UPVC SWR branch pieces, single (equal or unequal), Single Y equal or unequal etc, complete all as specified and directed.

Description all as per item No 107 above but 75 mm dia bore

S&F UPVC cowls of 75mm dia.

S&FUPVC cowls of 110mm dia.

S&F in repairs for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed .

S&F in repairs for 75/100 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed .

S&F in repair Brass chromium plated tubular towel rail 20mm dia `D' type 60 cm long between flanges, complete all as specified and directed .

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf of size12x60cm with chromium plated bracket guard and railing 60cm long, complete all as specified and directed.

S&F in repair corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf of size 300x300mm with chromium plated bracket guard and railing , complete all as specified and directed.

S&F in repair PTMT bath cabinet with mirror of size 350x450mm fixed with CP screws to wall complete all as specified and directed.

S&F in repair PVC waste pipe 32 mm dia complete all as specified and directed.

M/S A.R TANTRAY (BID ID -3088485)

SOFI CONSTRUCTIONS (BID ID -3094868)

M/S Thakur & Sons (BID ID -3090854)

M/S ZAHOOR ENTERPRISES (BID ID -3095350)

rafiq trading co (BID ID -3089151)

M/s Nasir Rasool Dar (BID ID -3085676)

FIRDOUS AHMAD BABA (BID ID -3090220)