Repairing and Maintenance of Ground floor of E-in-C office Non-Residential Building at Cantt Road, Lucknow.

Amount

Dismantling existing plaster, including disposal of refuse as directed by the Engineer-in-charge with in distance of 60m.

12mm cement plaster in sigle coat on rough side of single/ half brick wall for interior/ exterior plastering in single storey building finished even & smooth 1 cement : 4 coarse sand including all L/M, T&P etc.

Providing and applying plaster of putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Scraping old white or colour wash including disposal of refuse as directed by Engineer- in- charge with in a distance of 60m.

One priming coat and two coat oil bound distemper including supply of all materials, labour and T&P etc.required for proper completion of work.

Painting or varnishing on iron work in small areas or new wood work with one coat of ready mixed paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc required for proper completion of work.

P/F hydraulic door closer godrej or equivalent including all material and labour complete.

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

HEP make HCl Pipe with Socket in 1.8 Metre Length 150 mm dia wt.22Kg.

P/F in position CI. manehole cover and frames, IS:7267 embedded in R.C.C. cover and slab all exposed edges rounded and finished complete.

P/F 10 Lit. low level P.V.C. cistern of standard approved make complete with all accessories and fittings.

P/F looking mirror of 900×450 mm size of approved make with teak wood moulded frame and 6mm thick hard board backing including cost of material ,labour and T&P etc.as per IDSOR chp-18 item-38(b)

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore.

Providing & fixing 5.0 mm thick glass panes (weight not less than 12.5 kg per sqm).

Supply & fixing of anodised/aluminium door portion having 2 mm thick aluminium section excluding coating & an average coating of 20 micron fully glazed made of aluminium door tube size 83.5x44.65 mm as vertical member & 114.00 x 44.45 mm size tube in bottom and horizontal members door chaukhat should be of aluminium tublar vertical with two openable shutters. The rate will include cost of material fixtures, 5 mm glass handles, locks, screw necessary beading & excluding cost of floor spring if required for proper completion of work as per direction of Engineer-in-charge.

BHAJAN LAL

m/s mohd. zamil

MANOHAR LAL AND COMPANY