PERIODICAL SERVICES TO OTM MD ACCN OF MCMM JABALPUR

Taking down cement or cement lime plaster, any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. Complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:6 and to be finished even and smooth (without using extra cement) complete all as specified and directed. (WPC measured and paid seperately)

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:6 and to be finished even and smooth (without using extra cement). Complete all as specified and directed.

M&L for 5mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:3 as in ceiling complete.

Supply only liquid waterproofing compound ISI marked complete.

M&L for preparation of old painted ceiling surfaces & applying three coat of white wash on prepared ceiling surfaces. Complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of distemper oil emulsion over a coat of primer and 3mm avg thick birla wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resisitance as per IS 15489:2004, alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as directed.

Preparation of old decorated plastered/un-plastered surfaces of wall at any height, pillars, cornices by brooming washing rubbing down at any height including necessary scaffolding and applying one coat of white wash complete all as specified and directed.

Preparation of old decorated plastered/un-plastered surfaces of wall at any height, pillars, cornices by brooming washing rubbing down at any height including necessary scaffolding and applying one coat of white wash complete all as specified and directed.

Preparation of old decorated plastered/un-plastered surfaces of wall at any height, pillars, cornices by brooming washing rubbing down at any height including necessary scaffolding and applying one coat of white wash complete all as specified and directed.

Complete removal of existing treatment of wall surfaces of brick or concrete surfaces, pillars, cornices and similar and applying two coat distemper oil emulsion over a coat of primer and avg 3mm thick wall care putty at any height including necessary scaffolding complete all as specified and directed.

Complete removal of existing treatment of wall surfaces of brick or concrete surfaces, pillars, cornices etc at any height including necessary scaffolding etc and applying two coat of alkali & fungal resistance, dirt resistance exterior emulsion weather coat paint of required shade over and including priming coat of exterior primer complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying two coats of Smart periodical external emulsion paint using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length or 30 mtr the spray machine should be of reputed manufacturer with pro guard techonology and capability of tracking pressure and paint usage an certified by paint manufacturer and as mentioned in PS and accessories for applying external emulsion paint should be able to spray in hard to reach areas and penetration of external emulsion paint on the surface over and including one coat of acrylic waterbased exterior grade primer @ 0.8 ltr (undiluted)/ 10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSL. Allow 6-8 hrs to dry the surface for painting of subbsequent coats over and including water proofing cement based putty @ 1 kg/undiluted) per sqm of average thickness 1mm over the plastered wall after prepare the surface even and smooth complete and sanding of the putty surfaces with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500. sanding pad of 240 grit or above to make the surface free from dust etc, by skilled labour.

Note:- (i) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. (ii) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. (iii) Allow 6 to 8 hrs time to dry the putty surfaces. (iv) Applying temporary covering of door, windows and other openings and removing the same and cleaning also included. (v) Cleaning of galvalume sheet after painting work and making the surface as per user satisfaction.

M&L including preparation of old painted Steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of Synthetic enamel paint complete all as specified and directed.

M&L including preparation of old painted Steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of aluminium paint on steel surfaces complete all as specified and directed.

M&L including preparation of old wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of Synthetic enamel paint complete all as specified and directed.

M&L including preparation of old wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of Varnish complete all as specified and directed.

Please Enable Macros to View BoQ information