Carrying out through USFD testing of running rails, welds , including level crossings, lead portion of points and crossings and scabbed rail testing of all types of Rails by NBC (Need based concept) method under traffic conditions as per provisions of IR's USFD manual and specifications for Ultrasonic Testing of Rails and Welds with latest correction slips and related instructions, duly marking defects, submission of daily reports and storing back up data as specified and directed with Contractor's USFD machine. The SRT/DRT machine should have minimum of 9 probes (including 37 degree forward/backward probe) with B-scan facility for detecting bolt hole cracks in Senior Regional Engineer, Ratnagiri region of Konkan Railway between Km 0/800 to 378/10. (Computer No. 71489) (Rate quoted shall be excluding GST. GST will be payable as applicable).

5.4.1 The tenderer must have minimum average annual contractual turnover of V/N crores; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Appendix-5 along with the copies of Audited Balance Sheet duly certified by the Chartered Accountant / Certificate from Chartered Accountant duly supported by Audited Balance Sheet for evaluating the above financial eligibility criteria.

5.2.1 The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, OR (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, OR (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. 5.2.2 Similar Nature of work : The definition of similar nature of work for the above stated work is as below : Similar nature of work means USFD testing of Rails and Welds with RDSO approved Operator and Equipment 5.3 a) RDSO certified USFD machines SRT/DRT/Hand held testing equipment's with B-scan facility equipped with 9 channels and two extra 37 degree probes and certificates b) RDSO certified USFD operator and machines for the testing is mandatory. To ensure it, the Contractor has to propose the name of RDSO approved USFD operator, which will be further be verified and approved by AEN/SEN. However contractor has to propose the RDSO approved USFD machines to be utilized for the testing in the tender itself c) Tenderer shall provide documentary evidence of (I) owning of minimum of Two (2) RDSO approved machines OR (ii) Proof of entering into MOU with manufacturer/supplier of RDSO approved vendor for required no.of machines as specified in (I) above. d) The firm shall submit the planning to complete the work, as per schedule given per quarter in the tender document duly indicating the number of machines and operators approved by the RDSO and it shall be commensurate with the prescribed quarterly schedule of testing. e ) the details are to be submitted in the proforma given below for assessing the capacity of the firm in rail testing (as on date of tender opening). No. of machines available/No.of operators available proposed calculated daily output of testing in TKM. Calculated quarterly output of testing in TKM (quarter is 3 months) f) The capacity worked out as per the comprehensive instructions issued by Railway Board letter No. Track/21/2004/0902/7/Vol-IlI dated 20.06.2022, in terms of testing by manual machine as 3 TKMs for SRT and 6 TKMs for DRT per day per machine with 2 operators in the above proforma shall be equal or greater than the quarterly schedule of progress mentioned under clause 14.0 of special conditions and technical specifications (USFD rail/welds testing), otherwise the offer will be summarily rejected even though the firm qualifies the technical eligibility criteria.

Defination of Similar Work :- Similar nature of work means USFD testing of Rails and Welds with RDSO approved Operator and Equipment

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

Submission of signed copy of Integrity Pact as per tender document

Submission of Undertaking as per proforma in Appendix 11 of Tender document

Submission of affidavit as per Proforma enclosed in Appendix 12 of Tender Document

Submission of Appendix 21 as per proforma enclosed in Tender Document