Repair/Renovation of Q.No-3, Vikram Chowk Jammu , Urban Forestry Division Jammu for the year 2022-23

Amount

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade

Finishing walls with water proofing cement paint of required shade:.Old work (one or more coats applied @ 2.20 kg/10sqm) complete

Painting with synthetic enamel paint of approved brand " and manufacture of required colour to give an even shade: One or more coats on old work.

Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete With stainless steel grade 304 wire gauge with wire of dia 0.50 mm With 2nd class teak wood beading 62x19 mm

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Sal wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Rate for thickness of shutter in mm per sqm Deodar wood

Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement: 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 meters lead.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

Providing and fixing C.P. brass bib cock of approved qualityconforming to IS : 8931 a) 15 mm nominal bore

Providing and fixing Flushing Cistern P.V.C. 10 litre capacity ( low level ) (White) fittings, accessories and flush pipe)

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.a) 15 mm nominal bore

Providing and fixing PVC waste pipe including PVC waste fittings complete 32mm dia.

Providing and fixing 100 mm sand cast iron grating for gully, floor or Nahani trap.

Providing and fixing 100 mm Stainless steel grating for gully, floor or Nahani trap.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Providing and fixing Wiring for light point/exhaust fan point/ ceiling fan point /Heating point with 1.5/2.5/4 sqmm FRLS PVC insulated copper conducter single core cable in surface/recessed medium class PVC conduit,with modular switch,modular plate suitable GI box as required. Make:- Anchor/Havells or equvalent.

Providing and fixing suitable size 3 Module GI Box with modular plate and cover infront including providing 5 pin 5/6 A modular switch/socket including connection etc. as required. Make:- Anchor/Havells or equivalent.

Providing and fixing following 5 pin 5/6 A modular switch/socket on the existing modular plate and switch box including connection etc as required. Make:- Anchor/Havells or equivalent.

MCB 6-32 Amp.

MCB 6-40 Amp.

CFL saver 14 watt of approved quality Make:- Anchor/Havels/Orient etc

NITIN GUPTA

Sudesh Kumar