SPL REPAIR TO ROOF TREATMENT IN BLDG NO P-314 P-316 AND P-329 AMD BLK AND TILING WK IN TOILET BATHROOM IN BLDG NO P-314 AND P-316 AT PARA UNDER GE SOUTH JAIPUR UNDER JAIPUR MIL STN

Amount

Water Proof Treatment to RCC Roof comprises the following, complete all as specified and as directed by Engr-in-Charge:- (a) Complete removal of existing roof treatement and disposed off the rubbish outside the defence land (b) All visible cracks to be opened up in V shape cleaned properly with wire brush washed and filled with cracks filling compound using cracks upto 15mm width of cracks (c) cracks of 15mm width are filled with URP cement grouting by injecting nozzles by authorised applicator of manufacturer carefully by following manufacturer's instructions (d) after drying one coat of (Home shield) roof coat paint shall be applied with roller in both directions with a gap of 12 hrs @ 1 Ltr per Sqm (each direction) of roof coat over a roof priming coat of 0.5 Ltr of water mixed to 1 ltr of roof coat (e) necessary gurantee for 5 years shall be submitted by the contractor Make: Berger Paints (Damp shield elasto) or equilent of other make/brand viz Sika/ Asian Paints (Except Smart care Damp Proof)/ IWL/

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 3 layer hoisted & fixed in position connecting with inlet/outlet pipe etc complete all as specified in SSR Part I 1000 Ltrs Capacity including Dismantling existing u/s water tanks as specified.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 3 layer hoisted & fixed in position connecting with inlet/outlet pipe etc complete all as specified in SSR Part I 500 Ltrs Capacity including Dismantling existing u/s water tanks as specified.

S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule complete all as specified.

M&L for providing circular, raised platform of height 20 cm below the tank and base 15cm more than the external dia of tank of PVC cylindrical water tank of capacity 500 liters using PCC 1:3:6 type c1 using 20mm graded stone aggregate with smooth finish complete all as specified.

M&L for providing circular, raised platform of height 20 cm below the tank and base 15cm more than the external dia of tank of PVC cylindrical water tank of capacity 1000 liters using PCC 1:3:6 type c1 using 20mm graded stone aggregate with smooth finish complete all as specified.

Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes :-

15 mm bore GI Pipe

20 mm bore GI Pipe

Taking down cement plaster including raking out joints, hacking for key scrubbing down with water etc built in CM complete all as specified.

M&L rendering 15 mm thick in CM (1:6) on stone masonry surfaces or surface other than fair face of brick work of walls finished even and fair without using extra cement complete all as specified.

M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick work of walls, finished fair & even complete all as specified.

M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified.

Preparation of new plastered surfaces of walls, pillars & cornices including brooming down and cleaning the surfaces & applying two coat of oil bound distemper complete all as specified.

Preparing new plastered surfaces including brooming down etc and applying three coat of white wash on ceiling complete all as specified.

Preparation of new plastered surfaces of walls, pillars & cornices including brooming down and cleaning the surfaces & applying two coat of cement base paint complete all as specified.

Demolition of PCC Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.

M&L 50 mm thick PCC type C-1 (1:3:6) using 20 mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection complete all as specified.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches/ wall, if required internal dia of pipe100mm/ 75mm dig complete all as specified.

S&F Cast iron 100mm bore sand cast soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified.

S&F Cast iron 100mm bore sand cast soil, waste and vent pipes in any length with or without ears, with cement joints, but fixed to wall complete all as specified.

S&F Cast iron 75mm bore sand cast soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified.

S&F Cast iron 75mm bore sand cast soil, waste and vent pipes in any length with or without ears, with cement joints, but fixed to wall complete all as specified.

S&F Cast iron 75mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified.

S&F Cast iron 100mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified.

S&F cast iron 75mm bore branches pieces single (equal or unequal) ordianry or inverted (spigot or socket type) or with parllel branches complete all as specified.

S&F cast iron 100mm bore branches pieces single (equal or unequal) ordianry or inverted (spigot or socket type) or with parllel branches complete all as specified.

S&F Cast iron 100mm bore vent cowls complete all as specified.

S&F in repair Stop valves 20 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified.

Preparation of old plastered surfaces of walls, pillars & cornices including brooming down and cleaning the surfaces & applying two coat of oil bound distemper complete all as specified.

Preparing old plastered surfaces including scrapping and applying three coat of white wash on ceiling complete all as specified.

Preparation of old plastered surfaces of walls, pillars & cornices including brooming down and cleaning the surfaces & applying two coat of cement base paint complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

S&F Coloured Glazed ceramic tiles size 300x200mm x 7mm thick in vertical surface edge cut/ joint free , on walls etc. set & jointed in neat cement slurry & pointed in coloured cement to match over 10mm thick plaster in CM(1:4) complete all as specified.

S&F Coloured Non Skid ceramic tiles 6 to 7mm thick (squares/ rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc. set & jointed in neat cement slurry & pointed in coloured cement to match over 15mm thick screed in CM (1:6) complete all as specified.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.'

M&L Brick work with sub class 'B' Old Size bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified.

M&L for rendering 15mm thick in cement mortar 1:6 on fair face of brick work or concrete surfaces using with WPC , finished even and fair as specified. NOTE: WPC mixed as @ of 3% by weight of cement shall be measured separately

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified.

M&L for mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for colomns hocking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified.

M&L Nominal Mix RCC Type Type B1 1:2:4 (20 mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

S&F in repairs Vitreous China wash basin fixed with and incl granite counter slab with cutting holes, white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets & waste fittings 32mm bore complete all as specified.

S&F stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends fancy type chromium plated with long shank and cup (concealed type), 15 mm fixed in repairs complete all as specified.

S&F brass CP Angle stop cock fancy type type long body,15 mm bore fixed in repairs complete all as specified.

S&F 15mm bore CP fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repair complete all as specified.

S&F 15mm bore fancy type CP Bib taps, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed, fancy type chromium plated long body fixed in repair complete all as specified.

S&F PVC connections 15mm size with PTMT nuts of length 300mm in repair complete all as specified.

M&L Chromium plated Overhead Rain shower with relvoling joint and 115mm long shower arm with wall flange 15 mm bore fancy type any colour half turn fixed in repair complete all as specified.

Dismantling of old U/S grating of any description or size and S&F PVC grating 125mm dia of weight not less than 40gm for floor trap / Nahani trap complete all as specified.

Taking down Chowkhats or frames exc 1.5 sq.m but n exc 4 sq. m with shutters (without taking off shutters from the frames) all as specified and directed by engr-in-Charge .

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification.

S&F Factory Made Solid PVC Moulded Door Shutter With Wood free EPS , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets 10 Ltrs capacity complete all as specified.

S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surface complete all as specified.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern) EWC , white excluding fixing bolts, flushing cistern and flush pipe) including provision of cement bedding including white colour plastic seat cover with flat bottom and CP hinging device and incl jet complete all as specified.

S&F Toughned glass 12mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed by Engr-in-Charge.

Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe and complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; supply & fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified.

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.

Taking down Chowkhats or frames not exc. 1.5 sq. m each (without taking off shutters from the frames) complete all as specified.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.

S&F sheet galss 4mm thick , oridnary quality & glazing with oil putty in square n exc 0.5 sqm in each pane sheet glass, ordinary quality, if sheet glass is ground or obscured or frosted, on one side complete all as specified.

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws and fixed in repairs complete all as specified.

S&F stainless steel butt hinges 100 mm long medium weight complete as specified.

S&F Aluminium anodised handles for doors cast type anodised 150 mm long complete as specified.

S&F Aluminium anodised barrel tower bolts extruded section 200 mm long complete as specified.

M & L for preperation of New Steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint on steel surfaces complete all as specified.

Supply only integral water proofing compound.

UMA TRADERS

JAGDAMBA CONSTRUCTION COMPANY

MSR INFRATECH

M/S Chandra Mohan Bansal