COMPREHENSIVE REPAIR AND MAINTENANCE IN INF BN CWE OFFICE CE OFFICE AND MES OFFICE INCLUDING OTHER MINOR UNITS AT SI LINES UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

M&L for petty repairs to easing of door shutters, window shutters, wooden cupboard shutters including fixing of screws for easy closing/ opening and tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.

M&L for petty repairs to leaking water in bib taps, pillar taps, stop cock, angle valve, shower rose, concealed stop cock, low level flushing cistern, CPVC/ GI pipe fittings including replacing and providing of best quality rubber washer, check nuts plunges, taflon tape, M-seal, brass spindles (specific type), GI/ brass/ CPVC fittings etc or any other minor parts repairs to make the system functional and leak proof, ensure smooth water supply without any wastage and stop water leakage complete all as specified and directed.

Carefully taking down existing aluminum/ glass doors of any size for necessary repairs and replacement of minor items such as screws, hinges, cleaning, servicing of floor spring and adjusting of level of doors and to make in working condition complete all as specified and directed. Note: Replacement of handle, floor spring or locks will be measured and paid separately under relevant items.

S&F in replacement anodised aluminium snap grid of size 600 x 600 mm frame work of false ceiling complete all as specified and directed.

S&F of exposed metal frame ceiling with PVC coated calcium silicate board of 6 mm thick of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid complete all as specified and directed. Note: Frame work for ceiling shall be measured and paid separately under respective item.

S&F of anodised aluminium Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.36 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.45 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (n. exc 1.2 m length) of 0.36 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including dismantling of existing false ceiling of any type complete all as specified and directed.

M&L for seamless calcium silicate ceiling made out of 1800 x 1200 x 12 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish including preparation of newly finished surface and applying two coat of oil bound distemper of approved color and pattern complete all as specified and directed.

S&F of hangers wire 2 mm dia GI wire (upto 1200 mm length) for adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and directed.

M&L for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including dismantling of old PVC or wooden boarding, any description, fixed in any position complete all as specified and directed.

S&F in replacement PVC pin hole sandwich wall lining consisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and matching L-shape beading at end and corners and fixing at site on PVC frame as per specification complete all as specified and directed.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed.

Labour only for rounding to exposed edges of stone slabs (one edge) such as in steps, cooking platform and other similar situations complete all as specified and directed.

M&L for 16-18 mm thick granite stone slab (of approved colour and texture) (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like over and including 15mm thick screed bed in cement mortar (1:6); including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade or granite including dismantling of old stone slab complete all as specified and directed.

M&L for 50mm thick sand stone slabs as in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, platform bases etc; n. exc. 2 m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 complete all as specified and directed.

M&L for 18-20 mm thick machine cut kota stone slab in flooring over and including 15 mm thick cement screed base in CM 1:6, laid and jointed with grey cement slurry including rubbing and mirror polishing and dismantling of old stone slab complete all as specified and directed.

M&L for light shade vitrified ceramic tiles (of approved shade and design) area of each tiles n. exc 0.36 sqm as in flooring over and including 15 mm thick screed bed in CM 1:6; set and jointed in neat cement slurry and pointed with white cement to match the shade of tiles including dismantling of old tiles fixed in any mortar complete all as specified and directed.

M&L for premium double charge glossy finish vitrified tiles 9-10mm thick (area of each tiles n. exc 1.00 sqm each) as in flooring over and including 15 mm thick screed bed in CM (1:6) fixed with 5 mm spacers, set and jointed in neat cement slurry and pointed with epoxy tile grout filling of approved make and color including dismantling of old tiles fixed in any mortar complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8mm thick (area of each tiles exc 0.11 Sqm but n.exc 0.18 Sqm) as in flooring over and including 15 mm thick screed bed in CM 1:6; set and jointed in neat cement slurry and pointed with white cement to match the shade of tiles including dismantling of old tiles fixed in any mortar complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) finishing of concrete topping even and rough complete all as specified and directed.

M&L for glazed ceramic coloured tiles with matching high lighter in vertical surfaces (design and pattern as approved) of size not less than 600 x 300 x 7-8 mm thick as in flooring over and including 10 mm thick rendering in CM 1:4; set and jointed in neat cement slurry and pointed with white cement to match the shade of tiles including dismantling of old tiles fixed in any mortar complete all as specified and directed.

M&L for glazed coloured ceramic tiles for steps, riser and skirting in single piece of size 300 x 1200 mm for steps, 200 x 1200 mm for risers and 600 x 1200 mm for landing of 10 mm thickness (min), over and including 10 mm thick rendering in CM 1:4; set and jointed in neat cement slurry and pointed with white cement to match the shade of tiles complete all as specified and directed.

M&L for heavy duty parking / outdoor tiles of minimum 10mm thickness (square/ rectangular) area of each tiles n. exc 0.11 Sqm, in floors over and including 15 mm thick screed bed in CM 1:6; set and jointed in neat cement slurry and pointed with white cement to match the shade of tiles including dismantling of old tiles fixed in any mortar complete all as specified and directed.

M&L for mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed.

S&F in repairs GI tubing of 15 mm bore 'medium weight' and all fittings, fixed to walls / ceilings or laid in floors in any positions complete all as specified and directed.

S&F in repairs GI tubing of 20 mm bore 'medium weight' and all fittings, fixed to walls / ceilings or laid in floors in any positions complete all as specified and directed.

M&L for cutting channels, grooves or rebates n. exc 15 cm girth and trimming surface with or without reinforcement complete all as specified and directed.

S&F in repairs 20 mm dia Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron and fixed complete all as specified and directed.

S&F in repairs 25 mm dia Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron and fixed complete all as specified and directed.

S&F in replacement rotational moulded polyethylene three layers water storage tank of white color of 500 ltrs capacity (cyllinderical vertical with closed top) hoisted and fixed in position at roof or stand as specified in SSR Pt-I complete all as specified and directed.

S&F in replacement rotational moulded polyethylene three layers water storage tank of white color of 1000 ltrs capacity (cyllinderical vertical with closed top) hoisted and fixed in position at roof or stand as specified in SSR Pt-I complete all as specified and directed.

S&F in replacement rotational moulded polyethylene three layers water storage tank of white color of 2000 ltrs capacity (cyllinderical vertical with closed top) hoisted and fixed in position at roof or stand as specified in SSR Pt-I complete all as specified and directed.

S&F in repairs 20 mm bore float ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron/ pvc/ cpvc pipe in water tank and fixed (Min wt - 210 gms) complete all as specified and directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550 x 400 mm including cutting for and pinning in ends of brackets or erecting stand with and including 32 mm PTMT waste coupling and 32mm dia corrugated waste pipe complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white with trap and seat cover including fixing bolts, flush pipe and making connection to drain (or out going pipe) and to flushing pipe, anti syphonage pipe, etc. complete all as specified and directed.

S&F in repairs vitreous china squatting pan 'Orissa pattern' of size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including PVC (SWR) P or S trap complete all as specified and directed.

S&F in repairs wash hand basin counter top of size 440 x 440 x 135 mm or 420 x 345 x 170 mm (rectangular/ oval shape) and fixed complete all as specified and directed.

S&F in repairs vanity of size 820 x 450 mm with vitreous china wash basin white of suitable size including CP waste coupling and waste pipe of 32 mm bore complete all as specified and directed.

S&F in repairs vitreous china urinal half stall type with fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement with brackets, flush pipe and union for discharge pipe, PTMT spreader and PTMT waste coupling 32mm and waste pipe, PVC Connection pipe 450mm long for flushing complete all as specified and directed.

S&F in repairs vitreous china urinal bowl type (back or corner wall type) of 465 x 355 x 265 mm white (minimum) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement (Exclusive of flushing cistern and trap) but including PTMT spreader, PTMT waste coupling and waste pipe of 32 mm dia, PVC connection pipe 450mm for flushing complete all as specified and directed.

S&F in repairs 32mm bore LDPE waste pipe for WHB/ sink not less than 80 cm in length upto floor trap complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC low level flushing cistern with inlet, float valve and handle including bracket, 32 mm dia PVC flush pipe and PVC connection 600 mm long complete all as specified and directed.

S&F in repairs 15 mm bore fancy type brass CP tall pillar taps (wt not less than 0.665 kg) with capstan heads, screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repairs 15 mm bore fancy type long body brass CP bib taps (wt not less than 0.575 kg) with capstan head, screwed down for iron pipe complete all as specified and directed.

S&F in repairs 15 mm bore fancy type long body brass CP two way bib taps with capstan head, screwed down for iron pipe complete all as specified and directed.

S&F in repairs 15mm bore brass CP stop / angle valve, with capstan head, screwed down, high pressure, screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F in repairs 15 mm bore fancy type brass CP concealed stop valves with capstan head and with long shank and cup, screwed down, high pressure and fixed complete all as specified and directed.

S&F in repairs CP shower rose with swivel joint of 125mm size screwed for 15 mm bore pipe complete all as specified and directed.

S&F in repairs stainless steel soap dish, premium quality and fixed to wall with plugs and screws complete all as specified and directed.

S&F in repairs PVC connection 15mm dia of length not less than 600mm with both ends, brass fly nuts for water supply complete all as specified and directed.

S&F in repairs CP health faucet (ABS Body) suitable for 15 mm dia pipe with 1.25 m long flexible steel tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs stainless steel towel ring fixed with and including screws and plugs complete all as specified and directed.

S&F in repairs brass CP tubular towel rail, 20mm dia, D type, 60cm long between flanges and fixed with screws complete all as specified and directed.

S&F in repairs 5 mm thick glass shelf with CP bracket 55 cm (min) long fixed with screws and PVC rawl plugs complete all as specified and directed.

S&F in repairs 5mm thick corner glass shelf (CP bracket) of size not less than 225 x 225 mm with SS railing fixed with screws and PVC rawl plug complete all as specified and directed.

Taking down and refixing shutters in same opening after adjusting the size, of any description exc 1 sqm but n. exc 2 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4.0 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and directed.

S&F in repairs pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

S&F in repairs pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) for fixing hold fast, coping, cills and filling in pressed steel door frames including finishing the surfaces to match with existing surface complete all as specified and directed.

S&F of 35mm thick second class hard wood factory made, plain framed panelled door shutter (any number of panels) with panel of 9 mm thick BWP commercial plywood or 12mm thick veneered particle board medium density, wood partical board with commercial face veneers, the size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F of 35mm thick second class hard wood factory made glazed and skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note: - Size of member of shutters as specified in SSR Part-I 1991 section 8 clause 8.24 (a).

S&F of 35mm thick factory made flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F of solid PVC door frame (approved color) of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, fixing in opening as per specification and drawing complete all as specified and directed.

S&F of factory made solid panel PVC door shutter (approved color and pattern) 30mm thick (stiles) consisting of frame made out of mild steel tube for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap inserted for top rail and bottom rail. Penelling of plain colour PVC sheet to be fitted to the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site complete all as specified and directed.

S&F of factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: M.S. hold fast/ lugs or SS dash fasteners shall be included in the quoted rate of item.

All as per item no. 70 here in before but WPC frames/ chowkhats of size 65 x 125 mm.

S&F of factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)proof and & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. Note: Stainless steel butt hinges and screws shall be paid seperately.

Supply only galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.4 mm complete all as specified and directed. Note: Fixing only rate is included in window/door shutter items.

S&F of 100 mm size stainless steel butt hinges, medium weight, cold rolled, and fixed complete all as specified and directed.

S&F of 150 mm long aluminum tower bolts of extruded section and fixed complete all as specified and directed.

S&F of 150 mm size extruded aluminium alloy handles, fabricated type, anodised handles and fixed complete all as specified and directed.

S&F of 200 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F of 150 mm long stainless steel tower bolts of premium quality and fixed complete all as specified and directed.

S&F of 150 mm size stainless steel handles, fabricated type premium quality and fixed complete all as specified and directed.

S&F of 250 mm long stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, and fixing bolts of premium quality and fixed complete all as specified and directed.

S&F of 140 mm long double body floor door stopper of aluminium alloy body and tongue, anodised and fixed in door shutters complete all as specified and directed.

M&L for preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F of 10 mm thick frosted toughened glass as in hinged doors including cutting to shape, drilling holes and fixing to door hinges complete all as specified and directed.

S&F of fancy type stainless steel body lock of premium quality/ approved brand for 10 mm thick toughened glass door with keys complete all as specified and directed.

S&F of 300mm long fancy type stainless steel H-type handle set, curve/ straight as required made out of 25 mm dia pipe and fixed to toughned glass doors complete all as specified and directed. Make Godrej (Product code 2807) or equivalent as approved.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repairs 4 lever mild steel mortice lock, vertical type, size 100mm for aluminum/wooden door lock with duplicate key complete all as specified and directed.

S&F of powder coated aluminium fabricated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F of powder coated aluminium (minimum thickness of powder coating 50 micron) shutters for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285 including necessary locks handle, rubber gasket for glass/ wire mesh fixing complete all as specified and directed.

S&F of 4.0 mm sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repairs 3 mm thick plain sheet glass fixed with oil putty, ordinary quality n.exc. 0.5 sqm in each pane complete all as specified and directed.

S&F in repairs 3mm thick figured glass with oil putty, ordinary quality n.exc 0.5sqm in each pane complete all as specified and directed.

S&F in replacement door closer aluminium (extruded section body) hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

S&F in repairs 300 mm long mild steel ordinary rat tail, rod pattern springs including roller and roller plate fixed to steel frame by welding complete all as specified and directed.

S&F in replacement 25mm dia stainless steel curtain rod (minimum 1mm thick) and fixed on brakets complete all as specified and directed.

S&F of decorative type stainless steel designer curtain rod end bracket and holder suitable for 25mm dia rod complete all as specified and directed.

M&L for 12 mm thick Plywood (No of ply should not less than 7), grade BWP, type BB fixed with screws to timber frame work including demolition of existing boarding complete all as specified and directed.

M&L for 0.9mm thick decorative laminated type 1 of surface finish (colour and pattern as approved) fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F of 100mm long stainless steel pressed handles, oval type, fixed in kitchen/ almirah shutters and drawers complete all as specified and directed.

S&F of 30mm width continuous (piano) hinges, mild steel, bright finish or electro galvanised and fixed with screws complete all as specified and directed.

S&F of 50 mm size magnetic catches for cabinets with striking plate and magnetic stud as per approved sample and fixed complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.

S&F of 75mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint laid in trenches or in floors or fixed to walls complete all as specified and directed.

S&F of 110mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint laid in trenches or floors or fixed to walls complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) junction (single ‘T’) equal or unequal with access door and fixed with solvent cement complete all as specified and directed.

S&F of 110mm bore PVC (SWR) junction (single ‘T’) equal or unequal with access door and fixed with solvent cement complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) bend in any radius and fixed with solvent cement complete all as specified and directed.

S&F of 110mm bore PVC (SWR) bend in any radius and fixed with solvent cement complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) coupler in any radius and fixed with solvent cement complete all as specified and directed.

S&F of 110mm bore PVC (SWR) coupler in any radius and fixed with solvent cement complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap plain with grating having dia meter of outlet 75mm including jointing with solvent cement complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar 1:6 on any face of brick/ concrete surfaces, finished even and smooth without using extra cement including taking down old plaster and raking out joints complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on any face of brick/ concrete surfaces, finished even and smooth without using extra cement with WPC as per manufacturer's instruction including taking down existing old plaster and raking out joints complete all as specfified and directed. Note:- WPC shall be measured and paid seperately.

M&L for 5 mm thick rendering in cement plaster 1:3 as in ceiling of brick/ concrete surfaces finished even and smooth without using extra cement including taking down old plaster and raking out joints complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces in walls soffits, facia, chajjas and applying two coats of exterior weather proof water based emulsion over a coat of compatible primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of 1 mm thick white cement based putty, finished even and smooth complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces as in ceilings and applying three coats of white washing complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for 10mm thick rendering cement plaster over PCC in CM 1:3, finished even and smooth (without using extra cement) and using WPC of approved make as per manufacturers instruction including taking down old plaster from roof complete all as specified and directed. Note:- WPC shall be measured and paid separately.

M&L for applying primer on roof surfaces with evenly a tack coat of industrial hot bitumen Grade VG-10 at the rate of 1.2 kg per sqm including cleaning newly plastered surface complete all as specified and directed.

M&L for applying APP based polymeric membrane minimum weighing 3 Kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) landed on primed surface by forced application including taking down old APP sheet of any thickness complete all as specified and directed.

M&L for preparation of newly fixed APP surfaces and evenly applying two coats of aluminum paint with roller brush complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B1 in lintels upto 1.5m clear span, cills, steps, copings, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including neccessary formwork complete all as specified and directed.

M&L for preparation of newly plastered or unplastered existing roof surface by washing rubbing down removing dirt, algea moss, fungal growth or vegitation etc. and applying approved damp proof chemical treatment to roof/ exterior wall/ parapet wall/ chhajjas and any other position as per site requirement complete all as specified and as directed in following steps:- Step-1 Opening of sealed container and dilute the chemical with water @ 1:3 using mechanical mixer to prepare primer and apply one coat of primer using roller and allow 4-6 hrs to dry for primer. Step-2 Apply two coats of approved chemical for roof treatment with roller to primed surface as per manufacturer's instruction and allow 4-6 hrs to dry treatment. Note :- Removal of old roof treatment work and plastering to floor / wall surface will be measuered and paid saperately. Make:- Asian Smart Care Damp Proof / Berger Weather Coat Roof Guard / Nerolac Perma No Damp

M&L for preparing and applying Dr. Fixit rain coat or any other equivalent material of make as approved by GE on walls in following steps as appended below:- Step-1: Existing substrates cleaned and removed all scale dirt, algea moss, fungal growth with using mechanical wall sander (having mechanical vaccum mechanism) with RPM not less than 1500, sanding pad of 80 grit of dia 7"/ 9"on walls (external surface). All loose plaster will be repaired with polymer modified mortar using Dr. Fixit pidicrete URP and norrow cracks upto 5mm shall be repaired with crack X-paste and the larger cracks upto 10mm with Dr. fixit crack-X shrink free. The surface shall be made dry completely for upto 4-6 days for application of primer. Step-2: Applying one coat primer Dr. Fixit rain coat diluted with 2:1 with water (prime seal:water) maintaining spreading rate @ 8 to 10 Sqm / ltr complete all as specified and directed. Step-3: Applying two coats of Dr. Fixit raincoat without any dilution for coverage 3.5 Sqm/ltr and second coat of Dr. fixit rain coat without any dilution for coverage 7 Sqm/ltr complete all as specified and directed. Note: Second coat must be applied after lapse of 6 to 8 hours application of first coat.

M&L for mild steel work for repair to damaged parts of mild steel gates, windows, grills etc; i.e. handle, sliding bolts, tower bolts, hinges, stoppers and alike including cutting to required size and necessary welding work complete all as specified and directed.

Welding only in repairs for gates, windows and other mild steel items, size of welding exc 2.5 cm but n. exc 5 cm in length (thickness of metal to be welded n. exc. 6 mm) complete all as specified and directed.

M&L for preparation of newly steel or iron surfaces and applying two coats of synthetic enamel paint over a cot of red oxide zinc chrome primer complete all as specified and directed.

S&F of mild steel framed work such as grills, gratings, cooler stands etc; with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290 Gde E-165 including necessary fixing to walls complete all as specified and directed.

Demolition of concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) and removing rubbish outside MD land complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete etc. to be laid in required slope complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in floors, finishing surfaces of concrete topping even and smooth with using extra cement complete all as specified and directed.

Supply only glass dividing strips, 3 mm thick, 38 mm wide laid in position conforming to design pattern as approved complete all as specified and directed.

Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.

M&L for PCC 1:3:6, type C-1 (using 20 mm graded stone aggregate) as in plinth protection finished fair and even laid in bays and cutting of dummy joints 65mm deep x 10mm wide @ 3m intervals and at corners filled with bitumen mastic 1:3 including demolition of cement concrete in ground floor and paving n.exc 15 cm thickness (below or above ground floor) complete all as specified and directed.

Cleaning and removing all scale and dirt etc. from tanks of capacity exc. 250 ltrs but n. exc. 500 ltrs each and also from mouths of circulating pipes of service water/ loft tanks/ over roof buildings at different locations complete all as specified and directed. Notes: (i) The contractor will write date of cleaning and next due date of cleaning on tank as directed. (ii) At the time of cleaning disconnected pipes/ fittings shall be reconnected as per existing to make it leak proof complete.

All as per item No. 136 here in before but of capacity exceeding 500 but not exceeding 1000 litres each.

M&L for preparation of old decorated plastered ceiling surfaces and applying two coats of white wash on ceiling complete all as specified and directed.

M&L for complete removal of existing treatment on walls and applying two coats of oil bound distemper over a coat of compatible wall primer and a coat of 1 mm thick wall care white putty on walls complete all as specified and directed.

M&L for preparation of old distempered surface of walls and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces in walls, soffits, facia, chajjas and applying one coat of exterior weather proof water based emulsion paint complete all as specified and directed.

M&L for brick work with sub class ‘B’ modular bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 including demolition of old brick masonary complete all as specified and directed.

M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M&L for mild steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 Grade St-240 including dismantling of old structural steel complete all as specified and directed.

S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick (precoated AZ 150 micron) of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and bitumen washer including dismantling of old sheets fixed at any location complete all as specified and directed.

All as per item No. 147 here-in-before but as in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed).

Supply and laying of 60mm thick rubber moulded factory made chamfered edge cement concrete glossy finish paver block of M-35 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness and size/ shape, laid in required colour and pattern over and including 50 mm thick compacted bed of fine river sand and proper embedding/ laying of interlocking paver blocks into the sand bedding layer and filling the joints with sand and cutting of paver blocks as per site requirement, finishing and sweeping extra sand complete all as specified and directed.

Supply and laying of 80mm thick rubber moulded factory made chamfered edge cement concrete glossy finish paver block of M-35 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness and size/ shape, laid in required colour and pattern over and including 50 mm thick compacted bed of fine river sand and proper embedding/ laying of interlocking paver blocks into the sand bedding layer and filling the joints with sand and cutting of paver blocks as per site requirement, finishing and sweeping extra sand complete all as specified and directed.

Deduct Schedule of credit (calculation will be done off line) Rs. 54730.00

AJIT ENTERPRISES (BID ID -3438491)

Makewell Enterprises (BID ID -3431901)

Raj Contruction (BID ID -3432410)

SHIV SHANKAR MISHRA (BID ID -3438670)