Kurinjipadi TP MLA 24-25 Shop Building Work

Amount

Earthwork excavation and depositing on bank with initial lead and lift of 10 metres and intial lift of 2 metres hard stiff block cotton hard red earthy shales muram gravel stoney earth and earth mixed with small size boulders and hard gravelly soil as per SS-20B

Supply and Filling with river sand from approved quarry including cost and conveyance at work site and all other labour charges etc. complete. necessary sectioning and levelling charges etc.

Plain Cement concrete 1:4:8 (one cement five sand and ten Coarse aggregate) using 40mm hard broken granite Metal for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick well rammed and consolidated complying with standard specification.

Reinforced cement Concrete 1:1.5:3 (one cement two sand three Coarse aggregate) mix using 20mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges etc., to complete as per std. specification.

Supplying and erecting steel centering including necessary supports for plane surfaces in foundation and basement for reinforced cement concrete works such as column footing, plinth beam, grade beam, stair case step, bed block etc. which require only normal strutting using M.S. sheets of size 90cm x60cm BG 10 gauge of stiffened with mild steel angles of size 25mm x 25mm x 3mm for boarding laid over silver oak joists of size 10 x 6.50cm spaced at about 90 cm centre to centre and supported by the casurina props of 10cm to 13cm dia spaced at 75cm centre to centre at suitable intervals etc. complying with standard specification. (The payment for centering shall be made only after the concrete is laid).

for Column

for Grade Beam

Slab & Beam

Supplying and fabricating MS (or) R.T.S. bar below 16 mm SI. 134 Supplying and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors -1 Qtl Adopting cost of rods as applicable for R.T.S rods

Brick Work in CM 1:5 mix using Stock bricks 9"x 4 1/2" x 3" including cost and conveyance of materials and labour charges etc., complete as per standard specification.

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Supplying and fixing of rolling shutters shall be pull and push type (Gear operated) made of 18G/3" lathe sections which consist of five main parts such as curtain, lock plate, guide channels rollers and hood cover. These five main parts are made out of special components detailed below: curtain shall be of 18G/3" lath sections cut to required size and filled with heavy cast iron / MS clips. For 8'0"(2.45m) high rolling shutter lath sections provided shall be not less than 37 numbers. Lock plate shall be 10GMS sheet and attached to the side brackets with 20mm square bar.Side brackets shall be of 10G MS plate and cast iron "U" clamps shall be rivetted to the side brackets. Roller shall be of heavy cast iron pullies fitted with heavy duty "C" class 40mm steel pipe and high tensile high carbon coil springs. 2 springs shall be supplied. Side brackets shall be of 10G MS plate and cast iron "U" clamps shall be rivetted to the side brackets. Roller shall be of heavy cast iron pullies fitted with heavy duty "C" class 40mm steel pipe and high tensile high arbon coil springs - 2 springs shall be supplied. Hood cover shall be of 0.8mm CRCA sheet reinforced with 25mmx25mmx3mm MS angle or gate channel. The rolling shutter in addition to the above should have pulling hook and shall be coated on exposed area with heavy coat of red oxide primer etc., complete.

Plastering with cement mortar 1:3 (one cement and three sand) mix to 10mm thick including cost and conveyance of all materials to site and all labour charges etc. complete as per standard specification.

Plastering with cement mortar 1:5 (One cement and five sand) mix to 12mm thick including costand conveyance of all materials to site and all labour charges etc. complete as per standard specification.

Plastering with cement mortar 1:3 (one cement and three sand) mix to 10mm thick including cost and conveyance of all materials to site and all labour charges etc. complete as per standard specification.

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement

Painting 2 coats with approved paint over Door and Windows with cleaning, preparing the surface and curing including cost and conveyance of all materials and all other labour charges etc., complete,

Painting two coats with ready mixed Plastic Emulsion Paint of'approved quality and colour over a priming coat, including 'thorough scrap ping,clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required - 10 m 2

Wiring with 2x 1.5 sqmm (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitablePVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point (SD 16)

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x l00 x 113 mm TW switch box for 5 A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire. for open PVC plug point. (SD 36)

Wiring with 2x 1.5 sqmm (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitablePVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC Fan point (For Electronic regulator) (SD 16)

Supply and fixing of 6 way SP DB of 16 A / way with 16 A DPIC switch of 500 V with F & N (Front Handle) on suitable angle iron frame work with trunking box MS cable entry box with earth connection only (SD 154)

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains (SD 65)

Providig Rain Water PVC Pipe 110mm dia 4 Kg/cm2 including cost and conveyance of all materials and all other labour charges etc. complete.

S.Karthikeyan (BID ID -1359142)