Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹17.6 LAccepted-AOC 24 824 GOVERDHAN COLONY MAIN BHIND ROAD GOLE KA MANDIR | 1 | Accepted-AOC Lowest bidder | |
| 2 | 2₹19.9 L+₹2.1 L (11.7%)Rejected-AOC | 2 | Rejected-AOC 2 | |
| 3 | 3₹20.0 L+₹2.1 L (11.9%)Rejected-AOC | 3 | Rejected-AOC 3 | |
| 4 | 4₹21.1 L+₹3.2 L (18.0%)Rejected-AOC A 93 SECTOR 36 GREATER NOIDA GAUTAM BUDDHA NAGAR UTTAR PRADESH 201308 | GAUTAM BUDDHA NAGAR | UTTAR PRADESH | 201308 | 4 | Rejected-AOC 4 | |
| 5 | 5₹21.5 L+₹3.6 L (20.2%)Rejected-AOC 110059 NEW DELHI NATIONAL CAPITAL TERRITORY OF DELHI 110059 | WEST DELHI | DELHI | 110059 | 5 | Rejected-AOC 5 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
16 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF TUGHLAKABAD
GE AF TUGHLAKABAD SANGAM VIHAR PO NEW DELHI 110080
COMPREHENSIVE B/R REPAIR AND OTHER ALLIED WORK IN DGQA COMPLEX AT BADARPUR UNDER GE (AF) TUGHLAKABAD
2023_MES_581892_1
GE/TKD-01/2023-24
Open Tender
Civil Works - Others
Item Rate
180 days
GE AF TUGHLAKABAD
MES contractor enlisted having deposited Standing Security with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
9 documents required · 9 mandatory
₹500
GE AF TUGHLAKABAD
₹40,000
Yes
12 Oct 2023
25 Apr 2023
18 May 2023
2 May 2023
16 May 2023
9 May 2023
Amount
Dismantling brick tiles or terracing tiles, single layer on roofs complete all as specified and directed by Engr-in-Charge.
Demolition of mud in roofs any thickness, including plastering and leeping plaster complete all as specified and directed by Engr-in-Charge.
M&L for Surface preparation of all foreign material such as grass roots dust/mud etc and roughening the concrete surfaces by wire brushes including 50 mm thick PCC (1:2:4) type B1 using 12.5 mm graded aggregate as in roof for maintain the uniform slope and applying cement screed bed of 10 mm thick 1:4 with water proofing compound @ 3% weight of cement as per manufacture instruction with APP modified polymeric membrane centre core of 100 micron HM HDPE, weight not less than 3 Kg/Sqm and clear thickness of membrane not less than 3 mm thickness, on newly prepared surface with overlap while torching shall be 100mm on length side & 100mm on width side of membrane as per manufacturer instruction with the following description complete all as specified and directed by Engr-in-Charge. (a) Apply evenly a coat of bituminous primer conforming to IS -3384 @ 0.40 Kg/Sqm. (b) A coat of bonding bitumen confirming to IS -702 of grade 85/25 @1.20 Kg/Sqm as IInd course. (c) Laying of APP modified polymeric membrane as a IIIrd course. (d) A coat of bonding bitumen confirming to IS -702 of grade 85/25 @ 1.20 Kg/Sqm as a forth course.
Supply only water proofing compound complete all as specified and directed by Engr-in-Charge.
M&L for providing cement concrete in roof or mud stops using type B-1 (1:2:4) type B1 by using 20 mm graded stone aggregate rounded or chamfered on edges complete all as specified and directed by Engr-in-Charge.
M&L for PCC (1:2:4) type B2 by using 40 mm graded stone aggregate as in tank staging laid including finishing the concrete surface even and smooth using extra cement complete all as specified and directed by Engr-in-charge.
Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 Sqm each as doors, windows & ventilators etc. and removal from site complete all as specified and directed by Engr-in-charge.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing and as directed by Engineer-in-Charge
S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 gauge thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings as directed by Engineer-in-Charge.
S&F Aluminium anodised 100 mm long Butt hinges with galvanised mild steel screws complete all as specified and directed by Engr-in-Charge.
S&F Aliminium anodised barrel tower bolts, 150 mm long complete all as specified and directed by Engr-in-Charge.
S&F Aluminium anodised handles, cast type anodised 125 mm long complete all as specified and directed by Engr-in-Charge.
Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed by Engr-in-Charge.
S&F Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM (1:6) complete all as specified and directed by Engr-in-Charge.
S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM (1:6) complete all as specified and directed by Engr-in-Charge.
S&F for pressed steel frames of size 75 X 60 mm for Cuboard frames with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM (1:6) complete all as specified and directed by Engr-in-Charge.
S&F rolled section framed work for door/window chowkhats made out of mild steel angle iron 40mm x 40mm x 6mm including necessary cutting welding etc complete all as specified and directed by Engr-in-Charge.
M&L for PCC (1:3:6) type C-1 by using 20 mm graded stone aggregate for filling in bed block of hold fast etc complete all as specified and directed by Engr-in-Charge.
Taking down shutter of any description exc 1.00 Sqm and n.exc 2.00 Sqm each and re-fixing the same in same opening complete all as specified and directed by Engr-in-Charge.
Taking down shutter of any description exc 1.00 Sqm and n.exc 2.00 Sqm each and removal from site complete all as specified and directed by Engr-in-Charge.
S&F 2nd class HW 35mm thick local made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.
S&F 35 mm thick glazed skeleton shutters open rebated and prepared to receive gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats complete all as specified and directed by Engr-in-Charge.
S&F of Continuous (piano) hinges, stainless steel, bright finish complete all as specified and directed by Engr-in-Charge.
S&F of 25 mm thick flush shutter, ISI marked, solid core construction with block board core and plywood face panels commercial face panels, commercial type on both sides complete all as specified and directed by Engr-in-Charge.
S&F of 19 mm thick medium density flat pressed three layer particle board extension grade quality with 5 mm thick teak wood edging on one side bottom and top and other side 10 mm teak wood edging with rebate suitable for cupboard shutters complete all as specified and directed by Engr-in-Charge.
S&F of in repair galvanised mild steel wire cloth 0.36 mm nominal dia of wire and avarage width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed by Engr-in-Charge.
S&F of 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-Charge.
S&F of 300 mm long mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified and directed by Engr-in-Charge.
S&F of 200 mm long mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed by Engr-in-Charge.
S&F of 150mm long oval type mild steel pressed handles, ISI marked stove enamelled black complete all as 150mm size complete all as specified and directed by Engr-in-Charge.
S&F of 100 mm long aluminium anodised hasp and staple safety tape including bolts to hinge plate and fixed with screws complete all as specified and directed by Engr-in-Charge.
S&F factory made Steel windows 1.25 mm thick box type (primer coated) ERW hollow P sections of size 60mm X 25mm including grill using 10 mm bar double riveted both gauze and glass shutter comprised gauged glazed skeleton shutters ERW section 50mm X 20mm and 1mm thick with two open able leafs consisting 2 Nos sash bar of T section 20mm X 3mm complete welded to frame with one vertical mullion of ERW box type T section of size 60mm X 25mm and 1.25 mm thick including cutting holes and making good dismantled portion in PCC (1:2:4) type B1 four numbers of each window including following fittings welded to frame shutter complete all as specified and directed by Engr-in-Charge:- (a) Hold fast, 150 mm long of 12mmX3mm made to shape 04 nos per window. (b) handle of Z section 20mmX25mm, 100 mm long -per leaf. (c) Mild steel tower bolt 150mm long - 02 Nos per leaf (d) Z section 20mmX25mm, 100 mm long stopper -01 nos per leaf. (e) Cleat 55mm long of hollow square 15mm X20mmX63mm welded to hinge -01 Nos per Leaf (f) MS pintal hinges of size 75mmX12mm- 02 Nos per leaf including SS wire cloth, 0.25mm to 0.36mm nominal dia of wire and average width of aperture 1.40mm to 2mm and fixed with aluminium wire staples and glass pan 3mm thick fixed with MS pin and oil putty including two coats of synthetic enamel paint. Note:- During fixing of window surface shall be make good in plumb with existing finishes like cement plaster, similar wall tile, floor tile etc and as per site requirement.
S&F in repair steel ventilators with top hung shutters including hinges steel peg stay complete all as specified and directed by Engr-in-Charge.
M&L for sheet glass ordinary quality 3.00 mm thick and glazing with oil putty in square n exc 0.50 Sqm in each panes fixed to steel or wooden window frames complete all as specified and directed by Engr-in-charge.
All as per item No 34 but pin head type, figured glass complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coasts of synthetic enamel paint (for steel surfaces) complete all as specified and directed by Engr-in-Charge.
M&L for preparing wood or wood based new surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.
S&F in repairs of vitreous China squatting pan of Orissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe including lime concrete bedding and connection to anti syphonage pipe etc including making good to floor complete all as specified and directed by Engr-in-Charge.
S&F in repair of PVC low level cistern of 10 ltrs capacity with top push button inclusive of brackets and PVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make complete all as specified and directed by Engr-in-Charge.
S&F in repair of wash hand basin of size 550 x 400 mm vitreous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed by Engr-in-Charge.
S&F in repair of 15mm bore chromium plated Pillar cock screwed down high pressure, with or without lettered Hot ot Cold with long screwed shanks and flynuts screwed for iron pipe complete all as specified and directed by Engr-in-Charge.
S&F in repair of PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and directed by Engr-in-Charge.
S&F in repair of 15 mm bore Angle stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair of brass chromium plated shower rose 125 mm of size with arme and with or without swivel joints to steel pipe or union complete all as specified and directed by Engr-in-Charge.
S&F in repairs of 15 mm dia bore concealed stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and directed by Engr-in-Charge.
S&F in repair of brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed by Engr-in-Charge.
S&F in repair of CP soap tray fixed to walls with rubber plugs complete all as specified and directed by Engr-in-Charge.
S&F in repair of 15 mm dia bore bib taps cast copper alloy with crutch and butterfly handle, screwed for iron pipe, or for brass ferrule complete all as specified and directed by Engr-in-Charge.
S&F in repair of sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, etc complete all as specified and directed by Engr-in-Charge.
S&F in repair of 125mm dia grating doom with/without waste hole of PTMT (Minimum weight 40 gms) complete all as specified and directed by Engr-in-Charge.
S&F in repair of for 25mm dia fancy type PVC coated on MS Pipe coloured curtainrod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed by Engr-in-Charge. Note: The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.
Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed by Engr-in-Charge.
Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed by Engr-in-Charge.
S&F GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, complete all as specified and directed by Engr-in-Charge.
S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, complete all as specified and directed by Engr-in-Charge.
M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove rust etc. complete all as specified and directed by Engr-in-Charge.
M&L for 15 mm thick Screed bed or bedding layer in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed by Engr-in-Charge.
S&F non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm in floors, complete all as specified and directed by Engr-in-Charge.
M&L for Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm in floors etc complete all as specified and directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not bedding, removing serviceable tiles and rubbish off the premises complete all as specified and directed by Engr-in-Charge.
M&L for 10 mm thick rendering in cement mortar (1:4) and finish the surface rough to receive the tile finish etc complete all as specified and directed by Engr-in-Charge.
M&L for non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm on vertical surfaces such as skirting etc complete all as specified and directed by Engr-in-Charge.
M&L for glazed ceramic coloured tiles 7mm thick 450 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. etc complete all as specified and directed by Engr-in-Charge.
M&L machine cut kota stone slab flooring 20-25 mm thick (minimum size 55 cms x 55 cms) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing complete all as specified and directed by Engr-in-Charge.
M&L for Screed bed or bedding layer of mortar 20 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed by Engr-in-Charge.
M&L for machine cut kota stone slabs as in vertical surfaces such as risers of steps 20-25 mm thick over 10 mm thick cement rendering (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, mirror polishing also moulding edges complete all as specified and directed by Engr-in-Charge.
M&L for 18- 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-Charge.
M&L for Granite 18-20mm thick (of any size) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixure or pigment to match with shade of granite old dismantling complete all as specified and directed by Engr-in-Charge.
Rounding to the edge of stone slabs on edge such as cooking platform/steps complete all as specified and directed by Engr-in-Charge.
Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc complete all as specified and directed by Engr-in-Charge.
S&F of 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps as directed 6 Kg/Sq cm complete all as specified and directed by Engr-in-Charge.
S&F of 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified and directed by Engr-in-Charge.
Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall, laid in trenches including all fittings & accessories complete all as specified and directed by Engr-in-Charge.
Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall, laid in trenches including all fittings & accessories complete all as specified and directed by Engr-in-Charge.
S&F of 100mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but fixed to walls & Fixing with clamps complete all as specified and directed by Engr-in-Charge.
S&F of 75mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but fixed to walls & Fixing with clamps complete all as specified and directed by Engr-in-Charge.
S&F of 100 bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door, complete all as specified and directed by Engr-in-Charge.
S&F of 75 bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door, complete all as specified and directed by Engr-in-Charge.
Demolition of brick work of any type built in cement mortar in foul condition etc complete all as specified and directed by Engr-in-Charge.
M&L for brick work built in cement and sand mortar 1:6 with sub class 'B' old size bricks straight or curved on plan exceeding 6m means radius complete all as specified and directed by Engr-in-Charge.
Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engr-in-Charge.
M&L for Rendering 15mm thick in patches in cement mortar (1:6) on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for Rendering 15mm thick in patches in cement mortar in (1:4) on fare face of brick work or concrete surfaces even and smooth without using extra cement & with using integral water proofing compound complete all as specified and directed by Engr-in-Charge.
M&L for Rendering 5mm thick in patches in cement mortar in (1:3) on ceiling complete all as specified and directed by Engr-in-Charge.
M&L for preparing new surfaces of walls and applying two coat of Oil bound distemper on new surface complete all as specified and directed by Engr-in-Charge.
All as per item No 86 above but three coats white wash on ceiling complete all as specified and directed by Engr-in-Charge.
All as per item No 86 above but two coat of cement base paint on wall complete all as specified and directed by Engr-in-Charge.
S&F in replacement of 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-Charge.
S&F in replacement of 1000 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-Charge.
S&F of 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete all as specified and directed by Engr-in-Charge.
S&F in repair of PVC PTMT bib tap 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge.
S&F in repair of 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and directed by Engr-in-Charge.
S&F 1.0 mtr long Aluminium door seal with screw complete all as specified and directed by Engr-in-Charge.
S&F in repair of vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or outgoing pipe and flush pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed by Engr-in-Charge.
S&F in repair of Health Faucet with 1.5 mtr long SS tube and hook complete all as specified and directed by Engr-in-Charge.
Supply only water closet seat, white closed pattern with flat bottom & cover & mild steel chromium plated hinging device complete all as specified and directed by Engr-in-Charge.
S&F in repair of existing plastic syphon for low level cistern PVC of 10 ltr capacity complete all as specified and directed by Engr-in-Charge.
Labour only in adjustment of the float valve or handle to without replacement of any part of the high level cistern & OHT of any size complete all as specified and directed by Engr-in-Charge.
S&F of 25 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.
Petty repairs for leaking water in bib tap, pillar tap, stop cock, angle valve, WHB mixture, wall mixture, concealed stop cock etc of any description any size by changing washer/jumper valve etc complete all as specified and directed by Engr-in-Charge.
Petty repairs low level flushing cistern any size/description for repair of leaking water by adjusting/replacing the washer and adjustment of lever require for making the cistern functional complete all as specified and directed by Engr-in-Charge.
Removal of air lock/blockage of water in GI tubing 15/20 mm bore including taking down (if required) cleaning the pipe or fitting etc and refixing the same in position complete including new GI fitting if required for refixing complete all as specified and directed by Engr-in-Charge.
Draining out water from existing PVC water storage tank exc 500 ltr and not exc 1000 Ltr capacity and cleaning solid deposited therein, washing out with soap water or surf including taking down connection and refixing complete all as specified and directed by Engr-in-Charge.
Easing of wooden door shutters/Almn door/PVC door shutter/Almn window (one unit shall comprising of one window/CB/show case/irrespective of number of leaves) for properly closing/opening tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc. complete all as specified and directed by Engr-in-Charge.
Easing of steel window shutter for properly closing/opening tightening of hinges by oiling greasing or by replacing of new box type hinges including necessary cutting & welding complete all as specified and directed by Engr-in-Charge. Note:- One unit shall be comprising of one window irrespective of no of leaves/shutter work to be carried out up to 12 m height.
S&F in repair of PVC tank cover as in PVC over head tank cover including cover to be fixed in frame with threading system, The frame to be fixed with tank by 4 Nos PVc nut bolts complete all as specified and directed by Engr-in-Charge. Note: The cover to be provided 500/1000 ltrs capacity.
S&F in repairs ISI marked hydraulically regulated door closer die aluminum body type complete suitable for door shutter width of 851 to 1000 mm and weight between 61 to 80 kg complete all as specified and directed by Engr-in-Charge.
S&F in repair of wall mixture 15 mm bore dia cast copper alloy with cap capston chromium plated screwed down high pressure with or without lettered "Hot" or "cold" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-Charge.
S&F in repair of Basin mixture 15 mm bore dia cast copper alloy with cap capstan chromium plated screwed down high pressure with or without Hot" or "Cold" long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-Charge.
S&F in repair of PVC bath room cabinet with mirror of size 432 mm x 311 mm complete all as specified and directed by Engr-in-Charge.
S&F in repairs of bib cock 2 way double handle with flange 15 mm bore (for iron pipe) cast copper alloy fancy type chromium plated screwed down, complete all as specified and directed by Engr-in-Charge.
Cleaning of the existing drain pipes up to 1.50 mtr depth by roding manually as required at site from manhole and well flushing after cleaning including getting out the sludge if any and liquid materials from connecting manholes, deposited in lines including removing the solids and sludge to outside defence land by covered transport and cutting the bushes around the manholes and on the route of the sewer line upto 1 meter width complete all as specified and directed by Engr-in-Charge.
M&L for dewatering / de-sludging of soakage well filled with of liquid or semi liquid waste by water sucking hydraulic pressure machine including cleaning of all sludge silt residue of both organic & in-organic nature by mechanical scrappers etc in any position & disposal off all the waste outside defence area as per prevailing rules of local authorities, the de-sludging of sewage soakage well is to be carried out up to the bottom slab of sewage sump / sewage / soakage well / septic tank complete, the sewage well wall & bottom slab to be cleaned by water with high pressure upto entire satisfaction of Engr-in-charge including necessary safety precautions to be adhered during working as per the prevailing local authorities rules. Note: The quoted rates shall be included for hydraulic pressure machine for this item.
Cleaning away all grass, vegetation, dry leaves, plant, roots of small plant, removal of algae etc from top of building roof surfaces if disturbed during removal of plants/plant roots etc complete all as specified and directed by Engr-in-Charge.
Maintenance and upkeep of sewage systems including removal of blockage from Nahani/Floor trap, water closet, soil/waste and vent pipes including fixtures/fittings such as junction, bend, Tee, pipe running on external wall of bldg junction holes of any description sewage line of any size including all manholes of any depth including cleaning & desludging upto final drop outlet in and the septic tank/returning flowing over of any description in any situation by using cycle rickshaw -01 Nos. within the premises (DGQA complex : office and residential) complete all as specified and directed by Engr-in-Charge. Note :- (i) Inspection of sewage line and preventive repair/maintenance to be carried out by the contractor in routine without waiting for the complaints from users. The record of the same shall be maintained by the contractor. (ii) Manhole/gully traps to be inspected and air/rectification of any blockage be done and record of the same be maintained in register by the contractor. (iii) The complaint has to be rectified within 08 Hrs as given in complaint register, failing which penalty will be imposed @ Rs. 100/- per complaint day. (iv) Tradesman & helper required daily (except holiday & Sunday) as under:- (i) One Plumber along for all plumbing items in Sch 'A'sec-I (ii) One Carpenter or all carpentry related items of Sch 'A' Sec -I
Cleaning of sewage lines of size 150mm dia and over including man holes through chassis mounted Diesel run vehicles mounted hydraulic operated high pressure suction cum getting sewer cleaning machine KAMBI-10 LCHB fitted with international standard pumps having 3000 ltrs suction capacity operating by skilled operator with supervisor cum engineer for cleaning/ partial desalting of manholes and sewer lines as per guide lines laid in IS-11972 (1987) and complete cleaning of site all as directed by Engineer-in-Charge. Note:- Jetting of the sewer line shall be carried out by high pressure system of w2200 PSI/Suction. The work shall be carried out as and when required basis for required lengths at various locations.
Dismantling Wrought iron or mild steel work of any description not otherwise provided for like flat iron bracket, angle etc complete all as specified and directed by Engineer-in-Charge.
M&L for rolled mild steel as in joist, channel, angle, or Tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths I.e. within 20mm of the length indicated) of GDE Fe 410-S, complete all as specified and directed by Engr-in-Charge.
S&F Welded steel wire fabric exc 4 Kg/ Sqm welded to steel section at any position complete all as specified and directed by Engr-in-Charge.
M&L for preparation of old plastered surfaces of walls and applying one coat of Cement base paint of approved tint, complete all as specified and directed by Engr-in-Charge.
M&L for preparation of old surface of brick/concrete wall surface by brushing, washing and applying one coat of exterior emulsion paint (Apex) on old decorated surface complete all as specified and directed by Engr-in-Charge.
M&L for preparation of old plastered surfaces of walls and applying one coat of Oil Bound distemper of approved tint, complete all as specified and directed by Engr-in-Charge. Note :- All holes/cracks to be filled with birla putty and making good to old surface.
All all as per item No 124 but one coat white wash on ceiling complete all as specified and directed by Engr-in-Charge.
akenterprises
FUTURE ENGINEERING
Deepak Electricals
V r traders
Rohan Construction Company
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .