Survey, Design, Supply, Transportation, Carriage, Erection, Testing and Commissioning for shifting and Creation alongwith HT and LT Line for various public works under UT Capex 2021 22 (as per details in scope of works) on turnkey basis.

Survey, Design, Supply, Transportation, Carriage, Erection, Testing and Commissioning for Shifting of 63 KVA Sub Station from near by the house of Aishwani Kumar Sharma to another place at Sandrani, Block Tikri

9 mtr. Long ST Pole (ST-410 SP33)

GI V Cross -arm with top Bracket including clamps

11KV Disc Insulators (Polymeric 45KN ) creepage distance 320 mm with tension fittings

11KV Pin Insulator (Polymeric) with Pins (12kv, 5KN) Creepage Distance 320mm

120 mm² Single-Core Cable, 1.1kV Grade, PVC Insulated Alumnium Stranded Conductor FRLS type

Galvanised Stay Set with 50x8mm stay clamp, guy insulator (2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

LT Distribution box for 63 KVA DTR with MCCB for incomer and SFU's for outgoing circuits.

11kv DO set Complete

Earthing complete by GI Rod 20 mm, 2.5 mtr long through G.I. Strip 32X3 mm

Cement bottoming of ST poles in 1:2:4 mix as per REC standards

Dismentling & re-erection of 63kva Transformer, LA Set, Channel X-arm with allied materials

Survey, Design, Supply, Transportation, Carriage, Erection, Testing and Commissioning for Shifting of LT network of 63 KVA Sub Station near by the house of Aishwani Kumar Sharma to another place at Sandrani, Block Tikri

8 mtr. Long PCC Pole (PCC WL-200Kg))

0.03 ACSR Conductor Weasel.

16kN Shackle Insulators

GI U-Clamp for shackle insulator

Galvinized Nuts and Bolts.

Survey, Design, Supply, Transportation, Carriage, Erection, Testing and Commissioning for providing of power supply to Grave yard and Eidgah at Pyt. Halqa Sunari

8 mtr. Long PCC Pole PCC WL -200Kg))

GI U-Clamp for shackle insulator

0.03 ACSR Conductor Weasel.

16kN Shackle Insulators

Galvinized Nuts and Bolts.

Danger Plates with Clamps

Anti- Climbing Device with Clamps

Earthing complete by GI Rod 20 mm, 2.5 mtr long through G.I. Strip 32X3 mm

Stone Pad (300 mm X 300 mm X 75mm)

Aluminium Jointing Sleeves

LT line spacers

Galvanised Stay Set with 50x8mm stay clamp, guy insulator (2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

Survey, Design, Supply, Transportation, Carriage, Erection, Testing and Commissioning for Erection of 11 KV line on 9 mtr long ST poles for creation of 25 KVA Sub Station at village Upper Meer District Udhampur.

9 mtr. Long ST Pole (ST-410 SP33)

11 mtr. Long ST Pole (ST-410 SP56)

GI V Cross -arm with top Bracket including clamps

GI Channel X-arm including clamps and Angle for braces

0.03 ACSR Weasel conductor

11KV Pin Insulator (Polymeric) with Pins (12kv, 5KN) Creepage Distance 320mm

11KV Disc Insulators (Polymeric 45KN ) creepage distance 320 mm with tension fittings

Galvanized Nuts and Bolts

Danger Plates with Clamps

Anti- Climbing Device with Clamps

Earthing complete by GI Rod 20 mm, 2.5 mtr long through G.I. Strip 32X3 mm

Painting of 9 mtr ST poles including crossarms/clamps with one coat of Red oxide Paint.

Painting of 9 mtr ST poles including crossarms/clamps with two coat of Aluminium Paint.

Cement bottoming of ST poles in 1:2:4 mix as per REC standards

LT Distribution for 25 KVA DTR with MCCB for incomer and SFU's for outgoing circuit

Survey, Design, Supply, Transportation, Carriage, Erection, Testing and Commissioning for creation of 25 KVA Sub Station at village Upper Meer District Udhampur.

11/0.433kV, 3-phase 25 KVA Distribution Transformer with Bimetallic Terminal Connectors Energy Level-2, Aluminium wound, and with LV Cable Box having detachable Aluminium Gland plate

Gapless surge arrestor 9KV, 10KA, LA with polymer housing station type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 kV Horn Gap Fuse Set 3 Phase 200A

70 mm² Single-Core Cable,1.1kV Grade, PVC Insulated Alumnium Stranded Conductor FRLS type

9 mtr. Long ST Pole (ST-410 SP33)

11kV Polymeric composite Disc Insulator 12kV, min failing load 45kN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm with tension fitting

GI Channel/Angle/Flat of sizes including clamps

Galvinized Nuts and Bolts.

LT Distribution for 25 KVA DTR with MCCB for incomer and SFU's for outgoing circuit

Cement bottoming of ST poles in 1:2:4 mix as per REC standards

Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239. GI Strip for neutral earthing of size 50 mm x 6 mm & 32mm x 3mm for connection of transformer body, G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.

Painting of sub station ST poles/cross arms/clamps with one coat of Red oxide and two coats of aluminium paint

Danger Plates with Clamps

Survey, Design, Supply, Transportation, Carriage, Erection, Testing and Commissioning for erection of LT line 1 phase 2 wire on 8 mtr long ST poles at Upper Meer.

8 mtr. Long ST Pole (ST-410 SP15)

GI M-Clamp for shackle insulator

0.03 ACSR Conductor Weasel.

16kN Shackle Insulators

Galvinized Nuts and Bolts.

Danger Plates with Clamps

Anti- Climbing Device with Clamps

Earthing complete by GI Rod 20 mm, 2.5 mtr long through G.I. Strip 32X3 mm for LT

Painting of 8 mtr ST poles including crossarms/clamps with one coat of Red oxide Paint.

Painting of 8 mtr ST poles including crossarms/clamps with two coat of Aluminium Paint.

LT line spacers

Galvanised Stay Set with 50x8mm stay clamp, guy insulator (2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete