PROVN OF CHAINLINK FENCING AND HARD STANDING PROJ FOR RAIN AT BLDG NO 108 UNDER GE SHILLONG

Amount

Dismantling post or strut (Wood, steel, RCC) any section incl taking out embeded portion by demolition of cement concrete in fdn and making good the disturbed portion of ground, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for. complete all as specified and directed.

Dismantling fencing wire mesh any type, complete all as specified and directed.

Excavation in post holes not exc. 0.5 cum, getting out returing, filling in and ramming earth and broken hard core/rubble mixed with earth with around the layers not exiding 25 cm each layers watering and removing surplus soil to a distance not exceeding 50 cm making good in soft/loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L for MS work for screws boits (Machine made) with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with wasahers and square nut, exc. 5 crn and n. exc. 10 cm long diameter of shank 11 to 15 mm complete all as specified and directed.

Supply only chain link MS galvanisd fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

M&L for TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F 1mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M & L for PCC 1:2:4 type B1 (Using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M & L for precast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified and directed.

M & L for 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for 110 mm PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

M&L for 75 mm PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bend 110mm dia complete all as specified and as directed.

S&F PVC (SWR) bend 75mm dia complete all as specified and as directed.

S&F PVC (SWR) 75mm dia vent cowl complete all as specified and as directed.

S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof suitable for 75mm bore pipe complete all as specified and as directed.

S&F 2 mm thick fibre reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed.

M&L for roof truss (framed), trussed, purlin etc. of angle or other section for fixing of sheets and similar works of Gde Fe-290(Gde E-165) complete all as specified and as directed.

M&L 100mm thick PCC 1:4:8 (using 40mm graded stone aggregate) type D-2 as in sub base complete all as specified and as directed.

M & L 100mm thick PCC 1:2:4 (using 40mm graded stone aggregate) type B2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed.

M&L for vitrified tiles darkshade (square /rectangular) polished area of each tiles not exc 0.36 in floors laid over and incl. 15 mm thk 1:4 screed bed jointed pointed with coloured cement to match the tiles complete all as specified and as directed.

All as Per Item no 26 here-in-above but in vertical surfaces such as skirting / dado laid surface over and including a backing coat of 10mm thick in CM 1:4 complete all as specified and as directed

M&L Rendering 10mm thick on concrete surface of wall in CM (1:6) and finished the surface fair & even without using extra cement, complete all as specified and as directed

M&L for PCC 1:3:6 (using 40mm graded stone aggregate) type C2, 75mm thick as in plinth protection finished even and smooth with out using extra cement complete all as specified and as directed.

M&L for PCC 1:3:6 (using 40mm graded stone aggregate) type C2 as in surface channels and drains complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stop ends complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat red oxide primer complete all as specified and as directed.

M/S T N CONSTRUCTION

M/s Hussain & Bros