Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.7 LAccepted-AOC | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹15.9 L+₹81,681.50 (5.42%)Rejected-Finance H NO 400 FLAT NO 13 A SEMATILLA DIMAPUR 797112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L2 | Rejected-Finance Quoted amount higher than L1 | |
| 3 | L3₹15.9 L+₹85,512 (5.68%)Rejected-Finance | L3 | Rejected-Finance Quoted amount higher than L1 | |
| 4 | L4₹16.2 L+₹1.2 L (7.69%)Rejected-Finance HOUSE NO 59 THILIXU VILLAGE BLOCK V PS POST DIMAPUR NAGALAND 797 112 | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L4 | Rejected-Finance Quoted amount higher than L1 | |
| 5 | Rejected-Technical | - | Rejected-Technical Documents not found as per NIT |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
3 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col N K Chaudhary
HQ 137 WKS ENGR PIN 914137 CO 99 APO
SPL REPAIR TO BLDG NO T-84 (OR LIVING) AT XXXXX AT CHAKABAMA MIL STN
2023_MES_608423_2
8777/E8
Open Tender
Civil Works
Item Rate
180 days
Zakhama
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
AGE (I) Zakhama
₹30,000
Yes
17 Nov 2023
9 Sept 2023
10 Oct 2023
9 Sept 2023
3 Oct 2023
19 Sept 2023
Amount
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including similar pattern roof covering complete all as specified and as directed.
Material and labour for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Material and labour for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and as directed.
Supply and fixing plain galvanised mild steel sheeting of 0.63mm thick in ridges, hips, valley gutters, drips and straight flashings with grade of zinc coating 275 fixed with nails complete all as specified and as directed.
Refixing of plain galvanised mild steel sheeting of 0.63mm thick in ridges, hips, valley gutters, drips and straight flashings with grade of zinc coating 275 fixed with nails complete all as specified and as directed.
Material and labour for preparation of new zinc (or galvanised) surfaces to receive painting over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer over coating with mordant solution complete all as specified and directed.
Dismantling of Mild Steel or Wrought Iron Work of any description not otherwise provided for complete all as specified and as directed.
M&L Rolled mild steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including with plates, channels, square cut or notched forming holes riveted, distance pieces, cleats etc including drilling, bolting or riveting, welding attachment etc and similar work conforming to Fe 410-W (Gde-E- 250) quality-A complete all as specified and as directed.
Supply and fixing Mild Steel work as in Hand Rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for Balusters Running Bars, for Doors, Balusters, Nosing to Steps including embedding in concrete and screwing etc., Wind Ties for roof including securing bolts, Posts and Struts in Fencing including cutting tops to shape as directed, bending to shape, notching for wire, drilling holes or as in flat iron fillets [for securing wire mesh and barbed wire etc.] including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290, Grade E-165 complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and as directed.
Supply and fixing 4 mm thick,Plywood, grade BWR, type BB, fixed with nails to timber frame work complete all as specified and as directed.
Supply and fixing 4mm thick, non asbestos fibre cement building board painted with two coats of distemper oil emulsion over a coat of chalk whitening, fixed to the Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.
Dismantling timber scantling 40 Sqcm and over in section, unframed work in any position complete all as specified and as directed.
Material and labour for Timber framed and fixed clean sawn 2nd class hard-wood in scantling fixed complete all as specified and as directed.
Material and labour for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil complete all as specified and as directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed.
Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
Materials and labour for half brick thick brick work with sub class 'B' bricks straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified and as directed.
Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including raking out joints, hacking for Key, scrubbing down with water etc. complete all as specified and as directed.
Material and labour for 15mm thick rendering in CM (1:4) on brick work or concrete surface as on wall mixed with integral water proofing compound @ 3% by wt of cement, finished the surface even and fair complete all as specified and directed. (Note:Water proofing compound shall be measured & paid separately)
Supply only integral water proofing compound (WPC) of best quality (ISI marked) complete all as specified and as directed.
Materials and labour for 10 mm thick rendering on other than fair faces of brick work or concrete surface as on wall in cement mortar (1:6) and finishing the surface even and smooth without using extra cement complete all as specified and as directed.
Material and labour for preparation of newly plastered wall surfaces and applying two coats of Cement Based paint over a coat of Alkali Resistant Primer complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of chalk whiting primer complete all as specified and directed.
Material & Labour for joint free non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) of premium quality, area of each tile exceeding 0.11 sqm but not exc 0.18sqm in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by AGE(I)
Material & Labour for joint free non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) of premium quality, area of each tile exceeding 0.11 sqm but not exc 0.18sqm as in skirting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match over and including rendering of 10mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by AGE(I).
Material & Labour for 25 mm thick PCC 1:2:4, Type B-0 using 12.5mm graded aggregate as in sub base of flooring, surface finished fair and even complete all as specified and as directed.
Material & Labour for 75mm thick, PCC 1:3:6, Type C-1, using 20mm graded aggregate as in sub base etc. surface finished even and fair without using extra cement complete all as specified and as directed.
Material and labour for precast cement concrete chequered tiles of size 300 x 300 x 22 to 25 mm thick as in floor, set and jointed and pointed with neat cement slurry laid over and including 20 mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed.
Material & Labour for 75mm thick, PCC 1:3:6, Type C-1, using 20mm graded aggregate as in Plinth protection etc surface finished even and smooth without using extra cement and providing necessary joints 12mm wide to the full depth of PCC at every 3 meters and every change of directions and the joints duly filled with mastic filling comprising of 01 Part of heated bitumen blown grade any penetration and 3 parts of sand [all by weight] complete all as specified and as directed.
Material and labour for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in Cement concrete in surface channels and drains complete all as specified and as directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.
Demolition of Concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
Taking down shutters of any description exc 1.00 Sqm but n. exc. 2.00 Sqm each complete all as specified and as directed.
Taking down shutters of any description n. exc. 1.00 Sqm each complete all as specified and as directed.
Supply & Fixing factory made, 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
Supply & Fixing factory made, 30mm thick, Second Class Hard Wood, Glazed and Skeleton Shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part – I, Section 8, Clause 8.24 [a] and fitted to Chowkats complete all as specified and as directed.
Supply & Fixing 30mm thick, Second Class Hard Wood, Glazed and Skeleton Shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated Sash Bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part – I, Section 8, Clause 8.24 [b] and fitted to Chowkats complete all as specified and as directed.
Supply & fixing Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
Supply & fixing in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
Supply and fixing 3 mm thick sheet glass ordinary quality & glazing with oil putty, glazing pin etc in squares n. exe 0.5 sqm in each pane complete all as specified and as directed.
Supply and fixing 3 mm thick sheet glass ordinary quality & glazing with oil putty, glazing pin etc in squares n. exe 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames complete all as specified and as directed.
Supply and fixing 2nd Class hard wood plain, cover fillets, square, rectangular or triangular in section, bull nosed, splayed, chamfered or chamfered or rounded on one edge or face wrought, secured with screws, cross sectional area exceeding 3 Sq.cm and not exceeding 6 Sq.cm complete all as specified and as directed.
Supply and fixing 100 mm size, medium weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and as directed.
Supply and fixing 75 mm size, medium weight Butt Hinges, cold rolled, mild steel including fixtures complete all as specified and as directed.
Supply and fixing 300mm long Aluminium alloy, anodised, sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed complete all as specified and as directed.
Supply and fixing Aluminium anodised barrel tower bolt of extruded section and fixed 150 mm long complete all as specified and as directed.
Supply and fixing Aluminium anodised barrel tower bolt of extruded section and fixed 100 mm long complete all as specified and as directed.
Supply and fixing extruded aluminium alloy handles, fabricated type, anodised 150mm size complete all as specified and as directed.
Supply and fixing extruded aluminium alloy handles,fabricated type, anodised 100mm size complete all as specified and as directed.
Supply and fixing in repair Floor Door Stopper of size 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.
Supply and fixing in repair Hat and Coat Hooks, solid aluminium body, 175mm to 250 mm including screws complete all as specified and as directed.
Dismantling timber boarding of any description fixed in any position complete all as specified and directed.
Supply and fixing 2nd class HW Weather boarding, wrought both sides and edges shot and chamfered (on exposed edges) clean sawn, thickness 20mm to 25 mm and rebated on thick edge to give 20mm laps and fixed complete all as specified and as directed.
Supply and fixing 18/19mm thick, Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to pelmet boxes or in narrow widths n exc 15cm each, rebated or flat edged complete all as specified and as directed.
Supply and fixing in repairs 25 mm dia Harrison Rails [Curtain Rails], stainless steel with fixing brackets, stops, rollers etc complete all as specified and as directed.
Material and labour for preparation of new wooden surface exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Material and labour for preparation of old decorated wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for preparation of new steel surfaces to receive painting over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
Material and labour for preparation of old decorated steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for Writing letters or figures [Block, Roman, Italic or Indian] not exceeding 30 cm high complete all as specified and as directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit and making good disturbed surfaces of walls, floors, etc.etc complete all as specified and directed.
Material and labour for point wiring (surface type) for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistranded conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC casing caping of suitable size with all accessories and PVC rectangular boxes for mounting switch, socket and fan regulator etc complete all as specified and as directed. Note: (i) Wiring shall be done in proper colour coding using red , yellow, blue for phase, black for neutral and green for earth. (ii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate.
All as per item No 63 above but for 3 pin, 5 Amp Socket outlet on the same board complete all as specified and directed.
All as per item No 63 above but for 3 pin,5 Amp switch Socket outlet on independent board complete all as specified and directed.
Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed.
Supply and fixing socket out let 5 Pin, 6 Amps flush type complete all as specified and as directed.
Supply and fixing ceiling rose, PVC/polycarbonate, isolated body surface bakelite, 65mm x 25mm, ISI marked three terminals complete all as specified & directed.
Supply and fixing in repair Integrated LED Bulk head with luminaire of 10W, 6000 K with Pressure Die Cast Aluminium Housing, IP54 protection, heat resistant glass cover, high power LEDs as light source, electronic driver and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and as directed. Note: Light fitting shall be of PF>0.95
Supply and fixing in repair Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.
Supply and fixing in repair LED bulb, 10 W, Correlated colour temperature 3000 K, ball shape, Base type E-27 complete all as specified and as directed. Note: Light fitting shall be of PF>0.95
Supply and fixing LED batten with LED tube 20W LED 6000K T8 LED lighting fixture with extruded polycarbonate, environment friendly, energy efficient, 230V. 50Hz incl taking down old unsv tube light fittings complete all as specified and as directed.
Taking down ceiling fan carefully of any size from its original position, kept in safe custody and refixing the fan in same position or at new place including cleaning complete all as specified and directed.
Supply and fixing stepped type electronic fan regulator flush type complete all as specified and as directed.
Supply and fixing PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 250 mm x 200 mm and 50 mm deep complete all as specified and as directed.
Supply & Fixing MCB DB, SPN, 8 Way, 240 Volts, with DIN Channel, Double Door with 200 Amps rated bus bar suitable for mounting MCBs flush mounted with wall including taking down of existing unserviceable DB with MCBs including making good disturbed surfaces complete all as specified and as directed.
Supply & Fixing MCB SPN, 40 to 63 Amp,having braking capacity 10 KA, 240 Volt 'C' Curve complete all as specified and directed.
Supply and fixing MCB, 6 to 32 Amp, single pole having braking capacity 10 KA, 240 volts, 'C' Curve complete all as specified & directed. Note for serial Item No. 76 to 78: MCB and MCB DB shall be of same make as approved by AGE (I).
Material & Labour for sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm (Nominal area) drawn through in and including PVC Casing/ Caping with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 2.5 sqmm as earth lead and connected to earth dolly and including taking down old unserviceable sub main wiring of any description, making good to disturbed surfaces complete all as specified as directed. Note : (i) 3 Runs of 2.5 Sqmm cable and one run of PVC Casing/ Caping shall be measured as one unit length.
Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor of size 10 Sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular including taking down old unserviceable cable complete all as specified and as directed.
Material and Labour for House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Medium grade, two nos. 90 degree bends, M.S. hook and stay or guy including dismantling of existing old unserviceable house service brackets, any type complete all as specified and as directed.
Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion including taking down old unserviciable earthing set all as specified and as directed. Notes:- (i) Main earthing strip from earth plate electrode to test point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistance is not obtained the contractor shall redo the earthing without any extra cost to the department.
M/S ARVIND GROUP OF CONSTRUCTION & INFRASTRUCTURE
Ms ARENKOKLA CONTRUCTION
Shri Atoshe Tuccu
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .